- 28 Mar, 2006 24 commits
-
-
Brian Rogan authored
On ppc64 we look at a profiling register to work out the sample address and if it was in userspace or kernel. The backtrace interface oprofile_add_sample does not allow this. Create oprofile_add_ext_sample and make oprofile_add_sample use it too. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
gcc-4.2: kernel/module.c: In function '__find_symbol': kernel/module.c:158: warning: the address of '__start___kcrctab', will always evaluate as 'true' kernel/module.c:165: warning: the address of '__start___kcrctab_gpl', will always evaluate as 'true' kernel/module.c:182: warning: the address of '__start___kcrctab_gpl_future', will always evaluate as 'true' Signed-off-by:
-
Andrew Morton authored
If the user specified `major=0' (odd thing to do), capi.c will use dynamic allocation. We need to pick up that major for subsequent unregister_chrdev(). Acked-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Andrew Morton authored
If the user specified `major=0' (odd thing to do), pt.c will use dynamic allocation. We need to pick up that major for subsequent unregister_chrdev(). Signed-off-by:
-
Andrew Morton authored
If the user specified `major=0' (odd thing to do), pg.c will use dynamic allocation. We need to pick up that major for subsequent unregister_chrdev(). Signed-off-by:
-
Adrian Bunk authored
It's purely cosmetic, but with the patch there's no longer a BLK_DEV_RAM_COUNT setting in the .config if BLK_DEV_RAM=n. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Paul Fulghum authored
Remove code in async receive handling that serves no purpose with new tty receive buffering. Previously this code tried to free up receive buffer space, but now does nothing useful while making expensive calls. Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
Paul Fulghum authored
Add driver support for general purpose I/O feature of the Synclink GT adapters. Signed-off-by:
Paul Fulghum <paulkf@micrgate.com> Signed-off-by:
-
Paul Fulghum authored
Remove dead code from synclink driver. This was used previously when the write method had a from_user flag, which has been removed. Signed-off-by:
-
Kyle McMartin authored
Now that Christoph Lameter's atomic_long_t support is merged in mainline, might as well convert asm-generic/local.h to use it, so the same code can be used for both sizes of 32 and 64-bit unsigned longs. akpm sayeth: Q: Is there any particular reason why these routines weren't simply implemented with local_save/restore_flags, if they are only meant to guarantee atomicity to the local cpu? I'm sure on most platforms this would be more efficient than using an atomic... A: The whole _point_ of local_t is to avoid local_irq_disable(). It's designed to exploit the fact that many CPUs can do incs and decs in a way which is atomic wrt local interrupts, but not atomic wrt SMP. But this patch makes sense, because asm-generic/local.h is just a fallback implementation for architectures which either cannot perform these local-irq-atomic operations, or its maintainers haven't yet got around to implementing them. We need more work done on local_t in the 2.6.17 timeframe - they're defined as unsigned long, but some architectures implement them as signed long. Signed-off-by:
Kyle McMartin <kyle@parisc-linux.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Matt Mackall authored
Remove some duplicate BCD definitions Signed-off-by:
Matt Mackall <mpm@selenic.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Matt Mackall authored
Fix up some RTC whitespace and style Signed-off-by:
-
Matt Mackall authored
The sync may still be needed for CPU clock calibration but we don't sync in the regular case. Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Move real_year inside the read loop and move the spinlock up as well Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Reading the CMOS clock on x86 and some other arches currently takes up to one second because it synchronizes with the CMOS second tick-over. This delay shows up at boot time as well a resume time. This is the currently the most substantial boot time delay for machines that are working towards instant-on capability. Also, a quick back of the envelope calculation (.5sec * 2M users * 1 boot a day * 10 years) suggests it has cost Linux users in the neighborhood of a million man-hours. An earlier thread on this topic is here: http://groups.google.com/group/linux.kernel/browse_frm/thread/8a24255215ff6151/2aa97e66a977653d?hl=en&lr=&ie=UTF-8&rnum=1&prev=/groups%3Fhl%3Den%26lr%3D%26ie%3DUTF-8%26selm%3D1To2R-2S7-11%40gated-at.bofh.it#2aa97e66a977653d ..from which the consensus seems to be that it's no longer desirable. In my view, there are basically four cases to consider: 1) networked, need precise walltime: use NTP 2) networked, don't need precise walltime: use NTP anyway 3) not networked, don't need sub-second precision walltime: don't care 4) not networked, need sub-second precision walltime: get a network or a radio time source because RTC isn't good enough anyway So this patch series simply removes the synchronization in favor of a simple seqlock-like approach using the seconds value. Note that for purposes of timer accuracy on wakeup, this patch will cause us to fire timers up to one second late. But as the current timer resume code will already sync once (or more!), it's no worse for short timers. Signed-off-by:
-
- 27 Mar, 2006 16 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix off-by-1 error in TSB grow check.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: drop duplicate assignment in request_sock [IPSEC]: Fix tunnel error handling in ipcomp6
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Don't make debugfs depend on DEBUG_KERNEL [PATCH] Fix blktrace compile with sysfs not defined [PATCH] unused label in drivers/block/cciss. [BLOCK] increase size of disk stat counters [PATCH] blk_execute_rq_nowait-speedup [PATCH] ide-cd: quiet down GPCMD_READ_CDVD_CAPACITY failure [BLOCK] ll_rw_blk: kmalloc -> kzalloc conversion [PATCH] kzalloc() conversion in drivers/block [PATCH] update max_sectors documentation
-
NeilBrown authored
... being careful that mutex_trylock is inverted wrt down_trylock Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
Arjan van de Ven <arjan@infradead.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
NeilBrown authored
When retrying a write due to barrier failure, we don't reset 'remaining', so it goes negative and never hits 0 again. Signed-off-by:
-
NeilBrown authored
An md array can be asked to change the amount of each device that it is using, and in particular can be asked to use the maximum available space. This currently only works if the first device is not larger than the rest. As 'size' gets changed and so 'fit' becomes wrong. So check if a 'fit' is required early and don't corrupt it. Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
NeilBrown authored
raid5 overloads bi_phys_segments to count the number of blocks that the request was broken in to so that it knows when the bio is completely handled. Accessing this must always be done under a spinlock. In one case we also call bi_end_io under that spinlock, which probably isn't ideal as bi_end_io could be expensive (even though it isn't allowed to sleep). So we reducde the range of the spinlock to just accessing bi_phys_segments. Signed-off-by:
-
NeilBrown authored
wait_event_lock_irq puts a ';' after its usage of the 4th arg, so we don't need to. Signed-off-by:
-
NeilBrown authored
Signed-off-by:
-
NeilBrown authored
This allows user-space to access data safely. This is needed for raid5 reshape as user-space needs to take a backup of the first few stripes before allowing reshape to commence. It will also be useful in cluster-aware raid1 configurations so that all cluster members can leave a section of the array untouched while a resync/recovery happens. A 'start' and 'end' of the suspended range are written to 2 sysfs attributes. Note that only one range can be suspended at a time. Signed-off-by:
-
NeilBrown authored
This allows reshape to be triggerred via sysfs (which is the only way to start it happening). Signed-off-by:
-
NeilBrown authored
check_reshape checks validity and does things that can be done instantly - like adding devices to raid1. start_reshape initiates a restriping process to convert the whole array. Signed-off-by:
-
NeilBrown authored
Instead of checkpointing at each stripe, only checkpoint when a new write would overwrite uncheckpointed data. Block any write to the uncheckpointed area. Arbitrarily checkpoint at least every 3Meg. Signed-off-by:
-
NeilBrown authored
We allow the superblock to record an 'old' and a 'new' geometry, and a position where any conversion is up to. The geometry allows for changing chunksize, layout and level as well as number of devices. When using verion-0.90 superblock, we convert the version to 0.91 while the conversion is happening so that an old kernel will refuse the assemble the array. For version-1, we use a feature bit for the same effect. When starting an array we check for an incomplete reshape and restart the reshape process if needed. If the reshape stopped at an awkward time (like when updating the first stripe) we refuse to assemble the array, and let user-space worry about it. Signed-off-by:
-
NeilBrown authored
This patch adds raid5_reshape and end_reshape which will start and finish the reshape processes. raid5_reshape is only enabled in CONFIG_MD_RAID5_RESHAPE is set, to discourage accidental use. Read the 'help' for the CONFIG_MD_RAID5_RESHAPE entry. and Make sure that you have backups, just in case. Signed-off-by:
-
