This adds preliminary support for the ms7724se solution engine board.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This kills off after_bootmem and switches to using slab_is_available()
instead. Presently the only place this is used is by the sh64 ioremap,
and there's not much point in keeping the reference around otherwise.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds a NR_IRQS_LEGACY definition, which will be used by sparse irq.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

irq_to_desc_alloc_cpu() has been renamed to irq_to_desc_alloc_node() in
-next, but as we can not presently enable SPARSE_IRQ without the early
irq_desc alloc patch, protect it with an ifdef until the interface has
settled and we are ready to enable it system-wide.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch fixes the LCDC driver to avoid calling the
function sh_mobile_lcdc_start_stop(priv, 0) unless the
same function has been called before to start the LCDC
hardware.

Triggered when sh_mobile_lcdcfb.c failed to probe() due to
missing MSTP clocks.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch fixes the ap325rxa ncm03j camera code to handle
the case where no i2c driver is present. Without this fix
i2c_transfer() may be passed NULL as adapter which results
in a crash.

Triggered when i2c-sh_mobile.c failed to probe() due to
missing MSTP clocks.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This is just a simple arch_probe_nr_irqs() stub that wraps to the
platform defined number of IRQs. This can be made gradually more
intelligent based on what we can infer from the INTC tables and so on.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This hooks in irq_to_desc_alloc_cpu() to the necessary code paths in the
intc and ipr controller registration paths. As these are the primary call
paths for all SH CPUs, this alone will make all CPUs sparse IRQ ready.

There is the added benefit now that each CPU contains specific IPR and
INTC tables, so only the vectors with interrupt sources backing them will
ever see an irq_desc instantiation. This effectively packs irq_desc
down to match the CPU, rather than padding NR_IRQS out to cover the valid
vector range.

Boards with extra sources will still have to fiddle with the nr_irqs
setting, but they can continue doing so through the machvec as before.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This converts a few places that were using the old irq_desc[] array over
to the shiny new irq_to_desc() helper. Preperatory work for sparse irq
support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This tidies up how the SR.IMASK bitmap is managed, using the bitmap API
directly instead. At the same time, tidy up the irq_chip conversion a
bit.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-2.6:
  drm: Copy back ioctl data to userspace regardless of return code.
  drm: Round size of SHM maps to PAGE_SIZE

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: 64-bit: Fix system lockup.
  MIPS: IP28: Change to build with -mr10k-cache-barrier=store
  MIPS: IP22: Fix hang in power button interrupt handler
  MIPS: IP32: Fix hang on shutdown in power button interrupt handler.

* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits)
  [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *
  [ARM] 5517/1: integrator: don't put clock lookups in __initdata
  [ARM] 5518/1: versatile: don't put clock lookups in __initdata
  [ARM] mach-l7200: fix spelling of SYS_CLOCK_OFF
  [ARM] Double check memmap is actually valid with a memmap has unexpected holes V2
  [ARM] realview: fix broadcast tick support
  [ARM] realview: remove useless smp_cross_call_done()
  [ARM] smp: fix cpumask usage in ARM SMP code
  [ARM] 5513/1: Eurotech VIPER SBC: fix compilation error
  [ARM] 5509/1: ep93xx: clkdev enable UARTS
  ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2
  ARM: OMAP3: Fix HW SAVEANDRESTORE shift define
  ARM: OMAP3: Fix number of GPIO lines for 34xx
  [ARM] S3C: Do not set clk->owner field if unset
  [ARM] S3C2410: mach-bast.c registering i2c data too early
  [ARM] S3C24XX: Fix unused code warning in arch/arm/plat-s3c24xx/dma.c
  [ARM] S3C64XX: fix GPIO debug
  [ARM] S3C64XX: GPIO include cleanup
  [ARM] nwfpe: fix 'floatx80_is_nan' sparse warning
  [ARM] nwfpe: Add decleration for ExtendedCPDO
  ...

The second argument of the probe method points to the amba_id
structure, so it's better passed with the correct type. None of the
current in-tree drivers uses the pointer, so they have only been
checked for a clean compile.

Change suggested by Russell King.
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fixes a regression from commit 9d5b3ffc
('drm: fixup some of the ioctl function exit paths'): The vblank ioctl
needs to update the userspace parameters when interrupted by a signal,
which was prevented by the return code check. This could cause the X
server to hang in drmWaitVBlank().
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

The address range size calculation inside local_flush_tlb_kernel_range()
is being truncated by a too small size variable holder on 64-bit systems.
The truncated size can result in an erroneous tlbsize check that means we
sit spinning inside a loop trying to flush a hige number of TLB entries.
This is for all intents and purposes a system hang. Fix by using an
appropriately sized valiable to hold the size.

[Ralf: Greg's original patch submission identified the issue and fixed one
instance in tlb-r4k.c but there there were several more.  For consistency
I also modified tlb-r3k.c even though that file is only used on 32-bit.]
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Richard Sandiford's new code for inserting the cache-barriers, for GCC
4.3 and above and already incorporated in the current GCC-release, uses
a slightly different option-syntax.
Signed-off-by: peter fuerst <post@pfrst.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The hang was caused by the use of disable_irq() from the interrupt handler
itself.  Fixed by the use of disable_irq_nosync().  The issue was
triggered by:

    commit 3aa551c9
    Author: Thomas Gleixner <tglx@linutronix.de>
    Date:   Mon Mar 23 18:28:15 2009 +0100

        genirq: add threaded interrupt handler support
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The hang was caused by the use of disable_irq() from the interrupt handler
itself.  Fixed by the use of disable_irq_nosync().  The issue was
triggered by:

    commit 3aa551c9
    Author: Thomas Gleixner <tglx@linutronix.de>
    Date:   Mon Mar 23 18:28:15 2009 +0100

        genirq: add threaded interrupt handler support
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cdrom: beyond ARRAY_SIZE of viocd_diskinfo
  xen/blkfront: fix warning when deleting gendisk on unplug/shutdown
  xen/blkfront: allow xenbus state transition to Closing->Closed  when not Connected

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix pointer initialization and checks in cifs_follow_symlink (try #4)

Do not go beyond ARRAY_SIZE of viocd_diskinfo
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Fixes several compile errors due to the recent hd64461 I/O base changes.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: pcf50633: fix unsafe disable_irq()
  mfd: Keep a cache of WM8350 volatile values

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipv4: make default for INET_LRO consistent with help text
  net: fix skb_seq_read returning wrong offset/length for page frag data
  pkt_sched: gen_estimator: use 64 bit intermediate counters for bps
  be2net: add two new pci device ids to pci device table
  sch_teql: should not dereference skb after ndo_start_xmit()
  tcp: fix MSG_PEEK race check
  Doc: fixed descriptions on /proc/sys/net/core/* and /proc/sys/net/unix/*
  Neterion: *FIFO1_DMA_ERR set twice, should 2nd be *FIFO2_DMA_ERR?
  mv643xx_eth: fix PPC DMA breakage
  bonding: fix link down handling in 802.3ad mode
  bridge: fix initial packet flood if !STP
  bridge: relay bridge multicast pkgs if !STP
  NET: Meth: Fix unsafe mix of irq and non-irq spinlocks.
  mlx4_en: Fix not deleted napi structures
  ipconfig: handle case of delayed DHCP server
  netpoll: don't dereference NULL dev from np
  wimax/i2400m: fix device crash: fix optimization in _roq_queue_update_ws

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  TPM: get_event_name stack corruption

* 'core/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: setup writeable mapping for futex ops which modify user space data

Currently, userspace can fail to obtain the SAREA mapping (among other
reasons) if it passes SAREA_MAX to drmAddMap without aligning it to the
page size. This breaks for example on PowerPC with 64K pages and radeon
despite the kernel radeon actually doing the right rouding in the first
place.

The way SAREA_MAX is defined with a bunch of ifdef's and duplicated
between libdrm and the X server is gross, ultimately it should be
retrieved by userspace from the kernel, but in the meantime, we have
plenty of existing userspace built with bad values that need to work.

This patch works around broken userspace by rounding the requested size
in drm_addmap_core() of any SHM map to the page size. Since the backing
memory for SHM maps is also allocated within addmap_core, there is no
danger of adjacent memory being exposed due to the increased map size.
The only side effect is that drivers that previously tried to create or
access SHM maps using a size < PAGE_SIZE and failed (getting -EINVAL),
will now succeed at the cost of a little bit more memory used if that
happens to be when the map is created.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

get_event_name uses sprintf to fill a buffer declared on the stack.  It fills
the buffer 2 bytes at a time.  What the code doesn't take into account is that
sprintf(buf, "%02x", data) actually writes 3 bytes.  2 bytes for the data and
then it nul terminates the string.  Since we declare buf to be 40 characters
long and then we write 40 bytes of data into buf sprintf is going to write 41
characters.  The fix is to leave room in buf for the nul terminator.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

The futex code installs a read only mapping via get_user_pages_fast()
even if the futex op function has to modify user space data. The
eventual fault was fixed up by futex_handle_fault() which walked the
VMA with mmap_sem held.

After the cleanup patches which removed the mmap_sem dependency of the
futex code commit 4dc5b7a36a49eff97050894cf1b3a9a02523717 (futex:
clean up fault logic) removed the private VMA walk logic from the
futex code. This change results in a stale RO mapping which is not
fixed up.

Instead of reintroducing the previous fault logic we set up the
mapping in get_user_pages_fast() read/write for all operations which
modify user space data. Also handle private futexes in the same way
and make the current unconditional access_ok(VERIFY_WRITE) depend on
the futex op.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CC: stable@kernel.org

Produce correct output for
- tagged commit (v2.6.30-rc6)
- past tagged commit (v2.6.30-rc5-299-g7c7327d9)
- no tag
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Without this change Openmoko Freerunner (GTA02) bootstrap will deadlock.
As pointed out in other patches this issue is in the wild since the merge
of:

: commit 3aa551c9
: Author: Thomas Gleixner <tglx@linutronix.de>
: Date:   Mon Mar 23 18:28:15 2009 +0100
:
:    genirq: add threaded interrupt handler support
:
:    Add support for threaded interrupt handlers
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <balajirrao@openmoko.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Due to the way that the WM8350 audio driver handles CODEC_ENA many of
the WM8350 audio registers are marked as volatile when they aren't
actually so. Allow the audio driver to see a cache of these values for
inspection during interrupt context.

To do this we need to stop satisfying any bits from volatile registers
from cache - there's no real benefit from doing so anyway, we did the
read already.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix kind-of-intr checking against number of interrupts
  microblaze: Update Microblaze defconfig

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: da903x: add missing __devexit_p()

Martin Knoblauch reports that trying to build 2.6.30-rc6-git3 with
RHEL4.3 userspace (gcc (GCC) 3.4.5 20051201 (Red Hat 3.4.5-2)) causes an
internal compiler error (ICE):

    drivers/char/random.c: In function `get_random_int':
    drivers/char/random.c:1672: error: unrecognizable insn:
    (insn 202 148 150 0 /scratch/build/linux-2.6.30-rc6-git3/arch/x86/include/asm/tsc.h:23 (set (reg:SI 0 ax [91])
            (subreg:SI (plus:DI (plus:DI (reg:DI 0 ax [88])
                        (subreg:DI (reg:SI 6 bp) 0))
                    (const_int -4 [0xfffffffffffffffc])) 0)) -1 (nil)
        (nil))
    drivers/char/random.c:1672: internal compiler error: in extract_insn, at recog.c:2083

and after some debugging it turns out that it's due to the code trying
to figure out the rough value of the current stack pointer by taking an
address of an uninitialized variable and casting that to an integer.

This is clearly a compiler bug, but it's not worth fighting - while the
current stack kernel pointer might be somewhat hard to predict in user
space, it's also not generally going to change for a lot of the call
chains for a particular process.

So just drop it, and mumble some incoherent curses at the compiler.
Tested-by: Martin Knoblauch <spamtrap@knobisoft.de>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the third respin of the patch posted yesterday to fix the error
handling in cifs_follow_symlink. It also includes a fix for a bogus NULL
pointer check in CIFSSMBQueryUnixSymLink that Jeff Moyer spotted.

It's possible for CIFSSMBQueryUnixSymLink to return without setting
target_path to a valid pointer. If that happens then the current value
to which we're initializing this pointer could cause an oops when it's
kfree'd.

This patch is a little more comprehensive than the last patches. It
reorganizes cifs_follow_link a bit for (hopefully) better readability.
It should also eliminate the uneeded allocation of full_path on servers
without unix extensions (assuming they can get to this point anyway, of
which I'm not convinced).

On a side note, I'm not sure I agree with the logic of enabling this
query even when unix extensions are disabled on the client. It seems
like that should disable this as well. But, changing that is outside the
scope of this fix, so I've left it alone for now.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@inraded.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Currently blkfront gives a warning when hot unplugging due to calling
del_gendisk() with interrupts disabled (due to blkif_io_lock).

WARNING: at kernel/softirq.c:124 local_bh_enable+0x36/0x84()
Modules linked in: xenfs xen_netfront ext3 jbd mbcache xen_blkfront
Pid: 13, comm: xenwatch Not tainted 2.6.29-xs5.5.0.13 #3
Call Trace:
 [<c012611c>] warn_slowpath+0x80/0xb6
 [<c0104cf1>] xen_sched_clock+0x16/0x63
 [<c0104710>] xen_force_evtchn_callback+0xc/0x10
 [<c0104e32>] check_events+0x8/0xe
 [<c0104d9b>] xen_restore_fl_direct_end+0x0/0x1
 [<c0103749>] xen_mc_flush+0x10a/0x13f
 [<c0105bd2>] __switch_to+0x114/0x14e
 [<c011d92b>] dequeue_task+0x62/0x70
 [<c0123b6f>] finish_task_switch+0x2b/0x84
 [<c0299877>] schedule+0x66d/0x6e7
 [<c0104710>] xen_force_evtchn_callback+0xc/0x10
 [<c0104710>] xen_force_evtchn_callback+0xc/0x10
 [<c012a642>] local_bh_enable+0x36/0x84
 [<c022f9a7>] sk_filter+0x57/0x5c
 [<c0233dae>] netlink_broadcast+0x1d5/0x315
 [<c01c6371>] kobject_uevent_env+0x28d/0x331
 [<c01e7ead>] device_del+0x10f/0x120
 [<c01e7ec6>] device_unregister+0x8/0x10
 [<c015f86d>] bdi_unregister+0x2d/0x39
 [<c01bf6f4>] unlink_gendisk+0x23/0x3e
 [<c01ac946>] del_gendisk+0x7b/0xe7
 [<d0828c19>] blkfront_closing+0x28/0x6e [xen_blkfront]
 [<d082900c>] backend_changed+0x3ad/0x41d [xen_blkfront]

We can fix this by calling del_gendisk() later in blkfront_closing, after
releasing blkif_io_lock. Since the queue is stopped during the interrupts
disabled phase I don't think there is any danger of an event occuring between
releasing the blkif_io_lock and deleting the disk.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>