- 25 Feb, 2010 27 commits
-
-
Masami Hiramatsu authored
Add lazy line matching support for specifying new probes. This also changes the syntax of perf probe a bit. Now perf probe accepts one of below probe event definitions. 1) Define event based on function name [EVENT=]FUNC[@SRC][:RLN|+OFF|%return|;PTN] [ARG ...] 2) Define event based on source file with line number [EVENT=]SRC:ALN [ARG ...] 3) Define event based on source file with lazy pattern [EVENT=]SRC;PTN [ARG ...] - New lazy matching pattern(PTN) follows ';' (semicolon). And it must be put the end of the definition. - So, @SRC is no longer the part which must be put at the end of the definition. Note that ';' (semicolon) can be interpreted as the end of a command by the shell. This means that you need to quote it. (anyway you will need to quote the lazy pattern itself too, because it may contains other sensitive characters, like '[',']' etc.). Lazy matching ------------- The lazy line matching is similar to glob matching except ignoring spaces in both of pattern and target. e.g. 'a=*' can matches 'a=b', 'a = b', 'a == b' and so on. This provides some sort of flexibility and robustness to probe point definitions against minor code changes. (for example, actual 10th line of schedule() can be changed easily by modifying schedule(), but the same line matching 'rq=cpu_rq*' may still exist.) Changes in v3: - Cast Dwarf_Addr to uintmax_t for printf-formats. Changes in v2: - Cast Dwarf_Addr to unsigned long long for printf-formats. Signed-off-by:
Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133611.6725.45078.stgit@localhost6.localdomain6> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Masami Hiramatsu authored
Show 2 more lines after the last probe-able line. This will clearly show the last closed-brace of inline functions. Signed-off-by:
-
Masami Hiramatsu authored
Check (inlined) function address range strictly for improving output of probe-able lines of inline functions. Without this change, perf probe --line <function> sometimes showed other inline function bodies too, because it didn't filter out inlined functions. Signed-off-by:
-
Masami Hiramatsu authored
Use libdw callback functions aggressively, and remove local tree-search API. This change simplifies the code. Changes in v3: - Cast Dwarf_Addr to uintmax_t for printf-formats. Changes in v2: - Cast Dwarf_Addr to unsigned long long for printf-formats. Signed-off-by:
-
Masami Hiramatsu authored
Newer gcc introduces newer & richer debuginfo, and only libdw in elfutils project can support it. So perf probe moves onto elfutils-libdw from libdwarf. Changes in v3: - Cast Dwarf_Addr/Dwarf_Word to uintmax_t for printf-formats. - Recover a sign-prefix which was removed in v2 by mistake. Changes in v2: - Fix a type-casting bug in Makefile. - Cast Dwarf_Addr/Dwarf_Word to unsigned long long for printf-formats. Signed-off-by:
-
Masami Hiramatsu authored
Rename *_probepoint to *_probe_point, for nothing but a cosmetic reason. Signed-off-by:
-
Masami Hiramatsu authored
Fix find_line_range_by_line() to init line_list and remove misconseptional found marking which should be done when real lines are found (if there is no lines probe-able, find_line_range() should return 0). Signed-off-by:
-
Masami Hiramatsu authored
Update perf-probe.txt to suit to current perf-probe command and add some examples. Signed-off-by:
-
Masami Hiramatsu authored
Do not show --line option in help message when perf doesn't support dwarf. Signed-off-by:
-
Masami Hiramatsu authored
Add documentations about kprobe jump optimization to Documentation/kprobes.txt. Changes in v10: - Editorial fixups by Jim Keniston. Changes in v8: - Update documentation and benchmark results. Signed-off-by:
Jim Keniston <jkenisto@us.ibm.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133504.6725.79395.stgit@localhost6.localdomain6> Signed-off-by:
-
Masami Hiramatsu authored
Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by:
-
Masami Hiramatsu authored
Add generic text_poke_smp for SMP which uses stop_machine() to synchronize modifying code. This stop_machine() method is officially described at "7.1.3 Handling Self- and Cross-Modifying Code" on the intel's software developer's manual 3A. Since stop_machine() can't protect code against NMI/MCE, this function can not modify those handlers. And also, this function is basically for modifying multibyte-single-instruction. For modifying multibyte-multi-instructions, we need another special trap & detour code. This code originaly comes from immediate values with stop_machine() version. Thanks Jason and Mathieu! Signed-off-by:
-
Masami Hiramatsu authored
Introduce SAVE/RESOTRE_REGS_STRING for cleanup kretprobe-trampoline asm code. These macros will be used for emulating interruption. Signed-off-by:
-
Masami Hiramatsu authored
Integrate prepare_singlestep() into setup_singlestep() to boost up reenter probes, if possible. Signed-off-by:
-
Masami Hiramatsu authored
Add /proc/sys/debug/kprobes-optimization sysctl which enables and disables kprobes jump optimization on the fly for debugging. Changes in v7: - Remove ctl_name = CTL_UNNUMBERED for upstream compatibility. Changes in v6: - Update comments and coding style. Signed-off-by:
-
Masami Hiramatsu authored
Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by:
-
Masami Hiramatsu authored
Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by:
-
Masami Hiramatsu authored
Change RELATIVEJUMP_INSTRUCTION macro to RELATIVEJUMP_OPCODE since it represents just the opcode byte. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133349.6725.99302.stgit@localhost6.localdomain6> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Because symbol->end is not fixed up at symbol_filter time, only after all symbols for a DSO are loaded, and that, for asm symbols, may be bogus, causing segfaults when hits happen in these symbols. Reported-by:
David Miller <davem@davemloft.net> Reported-by:
Anton Blanchard <anton@samba.org> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: <stable@kernel.org> # for .33.x. Does not apply cleanly, needs backport. LKML-Reference: <20100225155740.GB8553@ghostprotocols.net> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Be more clear about DSO long names and tell from which file kernel symbols were obtained, all in --verbose mode: [root@mica ~]# perf report -v > /dev/null Looking at the vmlinux_path (5 entries long) Using /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux for symbols [root@mica ~]# mv /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux /tmp/dd [root@mica ~]# perf report -v > /dev/null Looking at the vmlinux_path (5 entries long) Using /proc/kallsyms for symbols [root@mica ~]# Signed-off-by: -
Arnaldo Carvalho de Melo authored
To overcome a silly gcc warning: cc1: warnings being treated as errors builtin-top.c: In function ‘lookup_sym_source’: builtin-top.c:291: warning: not protecting local variables: variable length buffer make: *** [builtin-top.o] Error 1 make: *** Waiting for unfinished jobs.... That is emitted for this: const size_t pattern_len = BITS_PER_LONG / 4 + 2; char pattern[pattern_len + 1]; Signed-off-by:
-
Zhang, Yanmin authored
In function dso__split_kallsyms(), curr_map saves the return value of map__new2. So check it instead of var map after the call returns. Signed-off-by:
Zhang Yanmin <yanmin_zhang@linux.intel.com> Acked-by:
-
Frederic Weisbecker authored
syscall_name() helper, which resolves a syscall arch number to its name, is not yet available as we first need to implement event injection for it to work. Remove it from the documentation or tag its references as unavailable yet. Once it's implemented, we can just revert the current patch. Signed-off-by:Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Tom Zanussi authored
Also small update to perf-trace-perl and perf-trace docs. Signed-off-by:
Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-13-git-send-email-tzanussi@gmail.com> Signed-off-by:
-
Tom Zanussi authored
If we know the size of a tuple in advance, there's no need to resize it - start out with the known size in the first place. Signed-off-by:
-
Tom Zanussi authored
Adds a set of scripts that aggregate system call totals and system call errors. Most are Python scripts that also test basic functionality of the new Python engine, but there's also one Perl script added for comparison and for reference in some new Documentation contained in a later patch. Signed-off-by:
-
Tom Zanussi authored
Add base support for Python scripting to perf trace. Signed-off-by:
-
- 23 Feb, 2010 5 commits
-
-
Tom Zanussi authored
The check-perf-trace script only checks Perl functionality, and doesn't really need to be listed as as user script anyway. This only removes the '-report' shell script, so although it doesn't appear in the listing, the '-record' shell script and the check perf trace perl script itself is still available and can still be run manually as such: $ libexec/perf-core/scripts/perl/bin/check-perf-trace-record $ perf trace -s libexec/perf-core/scripts/perl/check-perf-trace.pl Signed-off-by:
-
Tom Zanussi authored
Create a scripting-engines directory to contain scripting engine implementation code, in anticipation of the addition of new scripting support. Also removes trace-event-perl.h. Signed-off-by:
-
Tom Zanussi authored
This stuff is needed by all scripting engines; move it from the Perl engine source to a more common place. Signed-off-by:
-
Tom Zanussi authored
Fix bogus calculation. Signed-off-by:
-
Tom Zanussi authored
'perf trace -s list' prints a list of the supported scripting languages. One problem with it is that it falls through and prints the trace as well. The use of 'list' for this also makes it easy to confuse with 'perf trace -l', used for listing available scripts. So change 'perf trace -s list' to 'perf trace -s lang' and fixes the fall-through problem. Signed-off-by:
-
- 21 Feb, 2010 2 commits
-
-
Arnaldo Carvalho de Melo authored
As the parent comm then is worthless, confusing users about the thread where the sample really happened, leading to think that the sample happened in the parent, not where it really happened, in the children of a thread for which a PERF_RECORD_COMM event was not received. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
In 2161db96 we stopped failing when not finding modules when asked too, but then the kernel maps (just one, for vmlinux) wasn't having its ->end field correctly set up, so symbols were not being found for the vmlinux map because its range was 0-0. Reported-by:
-
- 08 Feb, 2010 1 commit
-
-
austin_zhang@linux.intel.com authored
When 'perf record -g' a existing process, even with debuginfo packages, still cannnot get symbol from 'perf report'. try: perf record -g -p `pidof xxx` -f perf report 68.26% :1181 b74870f2 [.] 0x000000b74870f2 | |--32.09%-- 0xb73b5b44 | 0xb7487102 | 0xb748a4e2 | 0xb748633d | 0xb73b41cd | 0xb73b4467 | 0xb747d531 The reason is: for existing process, in __cmd_record(), the pid is 0 rather than the existing process id. Signed-off-by:Austin Zhang <austin_zhang@linux.intel.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4710.10.255.24.35.1265389362.squirrel@linux.intel.com> Signed-off-by:
-
- 07 Feb, 2010 3 commits
-
-
Masami Hiramatsu authored
Fixes these warnings: arch/x86/kernel/alternative.c: In function 'alternatives_text_reserved': arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast Caused by: 2cfa1978: ftrace/alternatives: Introducing *_text_reserved functions Changes in v2: - Use local variables to compare, instead of type casts. Reported-by:
-
Arnaldo Carvalho de Melo authored
Because we may have aliases, like __GI___strcoll_l in /lib64/libc-2.10.2.so that appears in objdump as: $ objdump --start-address=0x0000003715a86420 \ --stop-address=0x0000003715a872dc -dS /lib64/libc-2.10.2.so 0000003715a86420 <__strcoll_l>: 3715a86420: 55 push %rbp 3715a86421: 48 89 e5 mov %rsp,%rbp 3715a86424: 41 57 push %r15 [root@doppio linux-2.6-tip]# So look for the address exactly at the start of the line instead so that annotation can work for in these cases. Signed-off-by: -
Kirill Smelkov authored
First, for programs and prelinked libraries, annotate code was fooled by objdump output IPs (src->eip in the code) being wrongly converted to absolute IPs. In such case there were no conversion needed, but in src->eip = strtoull(src->line, NULL, 16); src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff we were reading absolute address from objdump (e.g. 8048604) and then almost doubling it, because eip & map->start are approximately close for small programs. Needless to say, that later, in record_precise_ip() there was no matching with real runtime IPs. And second, like with `perf annotate` the problem with non-prelinked *.so was that we were doing rip -> objdump address conversion wrong. Also, because unlike `perf annotate`, `perf top` code does annotation based on absolute IPs for performance reasons(*), new helper for mapping objdump addresse to IP is introduced. (*) we get samples info in absolute IPs, and since we do lots of hit-testing on absolute IPs at runtime in record_precise_ip(), it's better to convert objdump addresses to IPs once and do no conversion at runtime. I also had to fix how objdump output is parsed (with hardcoded 8/16 characters format, which was inappropriate for ET_DYN dsos with small addresses like '4ac') Also note, that not all objdump output lines has associtated IPs, e.g. look at source lines here: 000004ac <my_strlen>: extern "C" int my_strlen(const char *s) 4ac: 55 push %ebp 4ad: 89 e5 mov %esp,%ebp 4af: 83 ec 10 sub $0x10,%esp { int len = 0; 4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp) 4b9: eb 08 jmp 4c3 <my_strlen+0x17> while (*s) { ++len; 4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp) ++s; 4bf: 83 45 08 01 addl $0x1,0x8(%ebp) So we mark them with eip=0, and ignore such lines in annotate lookup code. Signed-off-by:Kirill Smelkov <kirr@landau.phys.spbu.ru> [ Note: one hunk of this patch was applied by Mike in 57d81889 ] Signed-off-by:
-
- 05 Feb, 2010 1 commit
-
-
Masami Hiramatsu authored
Since mcount function can be called from everywhere, it should be blacklisted. Moreover, the "mcount" symbol is a special symbol name. So, it is better to put it in the generic blacklist. Signed-off-by:
-
- 04 Feb, 2010 1 commit
-
-
Ingo Molnar authored
perf top and perf record refuses to initialize on non-modular kernels: refuse to initialize: $ perf top -v map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.33-rc6-tip-00586-g398dde3-dirty/ Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org> Signed-off-by:
-
