- 20 Jan, 2020 6 commits
-
-
Heiner Kallweit authored
A number of network drivers has the same glue code to use phy_mii_ioctl as ndo_do_ioctl handler. So let's add such a generic ndo_do_ioctl handler to phylib. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The SERDES statistics are valid for all members of the 6390 family, not just the 6390 itself. Add the needed callbacks to all members of the family. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Alex Marginean authored
USXGMII supports passing link information in-band between PHY and MAC PCS, add it to the list of protocols that support in-band AN mode. Being a MAC-PHY protocol that can auto-negotiate link speeds up to 10 Gbps, we populate the initial supported mask with the entire spectrum of link modes up to 10G that PHYLINK supports, and we let the driver reduce that mask in its .phylink_validate method. Signed-off-by:
Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Alex Marginean authored
The APIs can be used by Ethernet drivers without actually loading a PHY driver. This may become more widespread in the future with 802.3z compatible MAC PCS devices being locally driven by the MAC driver when configuring for a PHY mode with in-band negotiation. Check that drv is not NULL before reading from it. Signed-off-by:
-
Vladimir Oltean authored
For some reason, PHYLINK does not put the copper modes for 802.3bz (NBASE-T) and 802.3an-2006 (10GBASE-T) in the PHY's supported mask, when the PHY-MAC connection is a 10G-capable one (10GBase-KR, 10GBase-R, USXGMII). One possible way through which the cable side can work at the lower speed is by having the PHY emit PAUSE frames towards the MAC. So fix that omission. Also include the 2500Base-X fiber mode in this list while we're at it. Signed-off-by:
-
Dejin Zheng authored
snps databook noted that physical coding sublayer (PCS) interface that can be used when the MAC is configured for the TBI, RTBI, or SGMII PHY interface. we have RGMII and SGMII in a SoC and it also has the PCS block. it needs stmmac_init_phy and stmmac_mdio_register function for initializing phy when it used RGMII interface. Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by:
-
- 19 Jan, 2020 31 commits
-
-
David S. Miller authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Three fixes for RISC-V: - Don't free and reuse memory containing the code that CPUs parked at boot reside in. - Fix rv64 build problems for ubsan and some modules by adding logical and arithmetic shift helpers for 128-bit values. These are from libgcc and are similar to what's present for ARM64. - Fix vDSO builds to clean up their own temporary files" * tag 'riscv/for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Less inefficient gcc tishift helpers (and export their symbols) riscv: delete temporary files riscv: make sure the cores stay looping in .Lsecondary_park -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix non-blocking connect() in x25, from Martin Schiller. 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski. 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang. 4) Limit size of TSO packets properly in lan78xx driver, from Eric Dumazet. 5) r8152 probe needs an endpoint sanity check, from Johan Hovold. 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from John Fastabend. 7) hns3 needs short frames padded on transmit, from Yunsheng Lin. 8) Fix netfilter ICMP header corruption, from Eyal Birger. 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu. 10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan. 11) Fix memory leak in act_ctinfo, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: reject overlapped queues in TC-MQPRIO offload cxgb4: fix Tx multi channel port rate limit net: sched: act_ctinfo: fix memory leak bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal. bnxt_en: Fix ipv6 RFS filter matching logic. bnxt_en: Fix NTUPLE firmware command failures. net: systemport: Fixed queue mapping in internal ring map net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec net: dsa: sja1105: Don't error out on disabled ports with no phy-mode net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset net: hns: fix soft lockup when there is not enough memory net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() net/sched: act_ife: initalize ife->metalist earlier netfilter: nat: fix ICMP header corruption on ICMP errors net: wan: lapbether.c: Use built-in RCU list checking netfilter: nf_tables: fix flowtable list del corruption netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks() netfilter: nf_tables: remove WARN and add NLA_STRING upper limits netfilter: nft_tunnel: ERSPAN_VERSION must not be null netfilter: nft_tunnel: fix null-attribute check ... -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Two runtime PM fixes and one leak fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: iop3xx: Fix memory leak in probe error path i2c: tegra: Properly disable runtime PM on driver's probe error i2c: tegra: Fix suspending in active runtime PM state
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add tunnel devlink-trap support This patch set from Amit adds support in mlxsw for tunnel traps and a few additional layer 3 traps that can report drops and exceptions via devlink-trap. These traps allow the user to more quickly diagnose problems relating to tunnel decapsulation errors, such as packet being too short to decapsulate or a packet containing wrong GRE key in its GRE header. Patch set overview: Patches #1-#4 add three additional layer 3 traps. Two of which are mlxsw-specific as they relate to hardware-specific errors. The patches include documentation of each trap and selftests. Patches #5-#8 are preparations. They ensure that the correct ECN bits are set in the outer header during IPinIP encapsulation and that packets with an invalid ECN combination in underlay and overlay are trapped to the kernel and not decapsulated in hardware. Patches #9-#15 add support for two tunnel related traps. Each trap is documented and selftested using both VXLAN and IPinIP tunnels, if applicable. ==================== Signed-off-by: -
Amit Cohen authored
Test that the trap is triggered under the right conditions and that devlink counters increase when action is trap. Signed-off-by:
Amit Cohen <amitc@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Amit Cohen authored
Add a trap for NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by:
-
Amit Cohen authored
Add packet trap that can report NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by:
-
Amit Cohen authored
Test that the trap is triggered under the right conditions and that devlink counters increase. Signed-off-by:
-
Amit Cohen authored
Test that the trap is triggered under the right conditions and that devlink counters increase. Signed-off-by:
-
Amit Cohen authored
Add the trap IDs and trap group used to report tunnel drops. Register tunnel packet traps and associated tunnel trap group with devlink during driver initialization. Signed-off-by:
-
Amit Cohen authored
Add packet traps that can report packets that were dropped during tunnel decapsulation. Signed-off-by:
-
Amit Cohen authored
Move L3_DROPS case to appear after L2_DROPS case. Signed-off-by:
-
Amit Cohen authored
Initialize ECN mapping registers during router init according to INET_ECN_encapsulate() and INET_ECN_decapsulate(). For IP-in-IP encapsulation, this is required to ensure that ECN bits in the underlay are set in accordance with the kernel. For decapsulation, this is required to ensure that packets with invalid ECN combination in underlay and overlay are trapped to the kernel and not forwarded. Signed-off-by:
-
Amit Cohen authored
This register configures the actions that are done during IPinIP decapsulation based on the ECN bits. Signed-off-by:
-
Amit Cohen authored
This register performs mapping from overlay ECN to underlay ECN during IPinIP encapsulation. Signed-off-by:
-
Amit Cohen authored
Add a trap for packets that the device decided to drop because they are not supposed to be routed. For example, IGMP queries can be flooded by the device in layer 2 and reach the router. Such packets should not be routed and instead dropped. Signed-off-by:
-
Amit Cohen authored
Add packet trap that can report packets that reached the router, but are non-routable. For example, IGMP queries can be flooded by the device in layer 2 and reach the router. Such packets should not be routed and instead dropped. Signed-off-by:
-
Amit Cohen authored
Add test cases to check that packets routed through disabled RIFs and packets routed from disabled RIFs are dropped and devlink counters increase when the action is trap. Signed-off-by:
-
Amit Cohen authored
IRIF_DISABLED and ERIF_DISABLED are driver specific traps. Packets are dropped for these reasons when they need to be routed through/from existing router interfaces (RIF) which are disabled. Add devlink driver-specific traps and mlxsw trap IDs used to report these traps. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 E-Switch chains and prios This series has two parts, 1) A merge commit with mlx5-next branch that include updates for mlx5 HW layouts needed for this and upcoming submissions. 2) From Paul, Increase the number of chains and prios Currently the Mellanox driver supports offloading tc rules that are defined on the first 4 chains and the first 16 priorities. The restriction stems from the firmware flow level enforcement requiring a flow table of a certain level to point to a flow table of a higher level. This limitation may be ignored by setting the ignore_flow_level bit when creating flow table entries. Use unmanaged tables and ignore flow level to create more tables than declared by fs_core steering. Manually manage the connections between the tables themselves. HW table is instantiated for every tc <chain,prio> tuple. The miss rule of every table either jumps to the next <chain,prio> table, or continues to slow_fdb. This logic is realized by following this sequence: 1. Create an auto-grouped flow table for the specified priority with reserved entries Reserved entries are allocated at the end of the flow table. Flow groups are evaluated in sequence and therefore it is guaranteed that the flow group defined on the last FTEs will be the last to evaluate. Define a "match all" flow group on the reserved entries, providing the platform to add table miss actions. 2. Set the miss rule action to jump to the next <chain,prio> table or the slow_fdb. 3. Link the previous priority table to point to the new table by updating its miss rule. Please pull and let me know if there's any problem. ==================== Signed-off-by: -
Rahul Lakkireddy authored
A queue can't belong to multiple traffic classes. So, reject any such configuration that results in overlapped queues for a traffic class. Fixes: b1396c2b ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
T6 can support 2 egress traffic management channels per port to double the total number of traffic classes that can be configured. In this configuration, if the class belongs to the other channel, then all the queues must be bound again explicitly to the new class, for the rate limit parameters on the other channel to take effect. So, always explicitly bind all queues to the port rate limit traffic class, regardless of the traffic management channel that it belongs to. Also, only bind queues to port rate limit traffic class, if all the queues don't already belong to an existing different traffic class. Fixes: 4ec4762d ("cxgb4: add TC-MATCHALL classifier egress offload") Signed-off-by:
-
Dejin Zheng authored
found a warning by the following command: ./scripts/checkpatch.pl -f drivers/net/phy/adin.c WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst #628: FILE: drivers/net/phy/adin.c:628: + msleep(10); Signed-off-by:
-
Eric Dumazet authored
Implement a cleanup method to properly free ci->params BUG: memory leak unreferenced object 0xffff88811746e2c0 (size 64): comm "syz-executor617", pid 7106, jiffies 4294943055 (age 14.250s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c0 34 60 84 ff ff ff ff 00 00 00 00 00 00 00 00 .4`............. backtrace: [<0000000015aa236f>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<0000000015aa236f>] slab_post_alloc_hook mm/slab.h:586 [inline] [<0000000015aa236f>] slab_alloc mm/slab.c:3320 [inline] [<0000000015aa236f>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549 [<000000002c946bd1>] kmalloc include/linux/slab.h:556 [inline] [<000000002c946bd1>] kzalloc include/linux/slab.h:670 [inline] [<000000002c946bd1>] tcf_ctinfo_init+0x21a/0x530 net/sched/act_ctinfo.c:236 [<0000000086952cca>] tcf_action_init_1+0x400/0x5b0 net/sched/act_api.c:944 [<000000005ab29bf8>] tcf_action_init+0x135/0x1c0 net/sched/act_api.c:1000 [<00000000392f56f9>] tcf_action_add+0x9a/0x200 net/sched/act_api.c:1410 [<0000000088f3c5dd>] tc_ctl_action+0x14d/0x1bb net/sched/act_api.c:1465 [<000000006b39d986>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424 [<00000000fd6ecace>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<0000000047493d02>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000bdcf8286>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000bdcf8286>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<00000000fc5b92d9>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<00000000da84d076>] sock_sendmsg_nosec net/socket.c:639 [inline] [<00000000da84d076>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<0000000042fb2eee>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<000000008f23f67e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<00000000d838e4f6>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<00000000289a9cb1>] __do_sys_sendmsg net/socket.c:2426 [inline] [<00000000289a9cb1>] __se_sys_sendmsg net/socket.c:2424 [inline] [<00000000289a9cb1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixes: 24ec483c ("net: sched: Introduce act_ctinfo action") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Rate adaptation for Felix DSA switch When operating the MAC at 2.5Gbps (2500Base-X and USXGMII/QSXGMII) and in combination with certain PHYs, it is possible that the copper side may operate at lower link speeds. In this case, it is the PHY who has a MAC inside of it that emits pause frames towards the switch's MAC, telling it to slow down so that the transmission is lossless. These patches are the support needed for the switch side of things to work. ==================== Signed-off-by: -
Alex Marginean authored
If the serdes link is set to 2500 using interfce type 2500base-X, lower link speeds over on the line side should still be supported. Rate adaptation is done out of band, in our case using AQR PHYs this is done using flow control. Signed-off-by:
-
Alex Marginean authored
Flow control is used with 2500Base-X and AQR PHYs to do rate adaptation between line side 100/1000 links and MAC running at 2.5G. This is independent of the flow control configuration settled on line side though AN. In general, allowing the MAC to handle flow control even if not negotiated with the link partner should not be a problem, so the patch just enables it in all cases. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, they are: 1) Incorrect uapi header comment in bitwise, from Jeremy Sowden. 2) Fetch flow statistics if flow is still active. 3) Restrict flow matching on hardware based on input device. 4) Add nf_flow_offload_work_alloc() helper function. 5) Remove the last client of the FLOW_OFFLOAD_DYING flag, use teardown instead. 6) Use atomic bitwise operation to operate with flow flags. 7) Add nf_flowtable_hw_offload() helper function to check for the NF_FLOWTABLE_HW_OFFLOAD flag. 8) Add NF_FLOW_HW_REFRESH to retry hardware offload from the flowtable software datapath. 9) Remove indirect calls in xt_hashlimit, from Florian Westphal. 10) Add nf_flow_offload_tuple() helper to consolidate code. 11) Add nf_flow_table_offload_cmd() helper function. 12) A few whitespace cleanups in nf_tables in bitwise and the bitmap/hash set types, from Jeremy Sowden. 13) Cleanup netlink attribute checks in bitwise, from Jeremy Sowden. 14) Replace goto by return in error path of nft_bitwise_dump(), from Jeremy Sowden. 15) Add bitwise operation netlink attribute, also from Jeremy. 16) Add nft_bitwise_init_bool(), from Jeremy Sowden. 17) Add nft_bitwise_eval_bool(), also from Jeremy. 18) Add nft_bitwise_dump_bool(), from Jeremy Sowden. 19) Disallow hardware offload for other that NFT_BITWISE_BOOL, from Jeremy Sowden. 20) Add NFTA_BITWISE_DATA netlink attribute, again from Jeremy. 21) Add support for bitwise shift operation, from Jeremy Sowden. ==================== Signed-off-by: -
Olof Johansson authored
The existing __lshrti3 was really inefficient, and the other two helpers are also needed to compile some modules. Add the missing versions, and export all of the symbols like arm64 already does. This code is based on the assembly generated by libgcc builds. This fixes a build break triggered by ubsan: riscv64-unknown-linux-gnu-ld: lib/ubsan.o: in function `.L2': ubsan.c:(.text.unlikely+0x38): undefined reference to `__ashlti3' riscv64-unknown-linux-gnu-ld: ubsan.c:(.text.unlikely+0x42): undefined reference to `__ashrti3' Signed-off-by:
Olof Johansson <olof@lixom.net> [paul.walmsley@sifive.com: use SYM_FUNC_{START,END} instead of ENTRY/ENDPROC; note libgcc origin] Signed-off-by:
Paul Walmsley <paul.walmsley@sifive.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Miquel Raynal: "Raw NAND: - GPMI: Fix the suspend/resume SPI-NOR: - Fix quad enable on Spansion like flashes - Fix selection of 4-byte addressing opcodes on Spansion" * tag 'mtd/fixes-for-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resume mtd: rawnand: gpmi: Fix suspend/resume problem mtd: spi-nor: Fix quad enable for Spansion like flashes mtd: spi-nor: Fix selection of 4-byte addressing opcodes on Spansion
-
- 18 Jan, 2020 3 commits
-
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Back from LCA2020, fixes wasn't too busy last week, seems to have quieten down appropriately, some amdgpu, i915, then a core mst fix and one fix for virtio-gpu and one for rockchip: core mst: - serialize down messages and clear timeslots are on unplug amdgpu: - Update golden settings for renoir - eDP fix i915: - uAPI fix: Remove dash and colon from PMU names to comply with tools/perf - Fix for include file that was indirectly included - Two fixes to make sure VMA are marked active for error capture virtio: - maintain obj reservation lock when submitting cmds rockchip: - increase link rate var size to accommodate rates" * tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Reorder detect_edp_sink_caps before link settings read. drm/amdgpu: update goldensetting for renoir drm/dp_mst: Have DP_Tx send one msg at a time drm/dp_mst: clear time slots for ports invalid drm/i915/pmu: Do not use colons or dashes in PMU names drm/rockchip: fix integer type used for storing dp data rate drm/i915/gt: Mark ring->vma as active while pinned drm/i915/gt: Mark context->state vma as active while pinned drm/i915/gt: Skip trying to unbind in restore_ggtt_mappings drm/i915: Add missing include file <linux/math64.h> drm/virtio: add missing virtio_gpu_array_lock_resv call -
Ilie Halip authored
Temporary files used in the VDSO build process linger on even after make mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp. Delete them once they're no longer needed. Signed-off-by:
Ilie Halip <ilie.halip@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - a resctrl fix for uninitialized objects found by debugobjects - a resctrl memory leak fix - fix the unintended re-enabling of the of SME and SEV CPU flags if memory encryption was disabled at bootup via the MSR space" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Ensure clearing of SME/SEV features is maintained x86/resctrl: Fix potential memory leak x86/resctrl: Fix an imbalance in domain_remove_cpu()
-
