- 01 Aug, 2012 40 commits
-
-
Minchan Kim authored
__zone_watermark_ok currently compares free_pages which is a signed type with z->lowmem_reserve[classzone_idx] which is unsigned which might lead to sign overflow if free_pages doesn't satisfy the given order (or it came as negative already) and then we rely on the following order loop to fix it (which doesn't work for order-0). Let's fix the type conversion and do not rely on the given value of free_pages or follow up fixups. This patch fixes it because "memory-hotplug: fix kswapd looping forever problem" depends on this. As benefit of this patch, it doesn't rely on the loop to exit __zone_watermark_ok in case of high order check and make the first test effective.(ie, if (free_pages <= min + lowmem_reserve)) Aaditya reported this problem when he test my hotplug patch. Reported-off-by:
Aaditya Kumar <aaditya.kumar@ap.sony.com> Tested-by:
Minchan Kim <minchan@kernel.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
mm/page_alloc.c has some memory isolation functions but they are used only when we enable CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}. So let's make it configurable by new CONFIG_MEMORY_ISOLATION so that it can reduce binary size and we can check it simple by CONFIG_MEMORY_ISOLATION, not if defined CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}. Signed-off-by:KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
David Rientjes authored
By globally defining check_panic_on_oom(), the memcg oom handler can be moved entirely to mm/memcontrol.c. This removes the ugly #ifdef in the oom killer and cleans up the code. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
-
David Rientjes authored
Since exiting tasks require write_lock_irq(&tasklist_lock) several times, try to reduce the amount of time the readside is held for oom kills. This makes the interface with the memcg oom handler more consistent since it now never needs to take tasklist_lock unnecessarily. The only time the oom killer now takes tasklist_lock is when iterating the children of the selected task, everything else is protected by rcu_read_lock(). This requires that a reference to the selected process, p, is grabbed before calling oom_kill_process(). It may release it and grab a reference on another one of p's threads if !p->mm, but it also guarantees that it will release the reference before returning. [hughd@google.com: fix duplicate put_task_struct()] Signed-off-by:
-
David Rientjes authored
The global oom killer is serialized by the per-zonelist try_set_zonelist_oom() which is used in the page allocator. Concurrent oom kills are thus a rare event and only occur in systems using mempolicies and with a large number of nodes. Memory controller oom kills, however, can frequently be concurrent since there is no serialization once the oom killer is called for oom conditions in several different memcgs in parallel. This creates a massive contention on tasklist_lock since the oom killer requires the readside for the tasklist iteration. If several memcgs are calling the oom killer, this lock can be held for a substantial amount of time, especially if threads continue to enter it as other threads are exiting. Since the exit path grabs the writeside of the lock with irqs disabled in a few different places, this can cause a soft lockup on cpus as a result of tasklist_lock starvation. The kernel lacks unfair writelocks, and successful calls to the oom killer usually result in at least one thread entering the exit path, so an alternative solution is needed. This patch introduces a seperate oom handler for memcgs so that they do not require tasklist_lock for as much time. Instead, it iterates only over the threads attached to the oom memcg and grabs a reference to the selected thread before calling oom_kill_process() to ensure it doesn't prematurely exit. This still requires tasklist_lock for the tasklist dump, iterating children of the selected process, and killing all other threads on the system sharing the same memory as the selected victim. So while this isn't a complete solution to tasklist_lock starvation, it significantly reduces the amount of time that it is held. Acked-by:
Sha Zhengju <handai.szj@taobao.com> Signed-off-by:
-
David Rientjes authored
This patch introduces a helper function to process each thread during the iteration over the tasklist. A new return type, enum oom_scan_t, is defined to determine the future behavior of the iteration: - OOM_SCAN_OK: continue scanning the thread and find its badness, - OOM_SCAN_CONTINUE: do not consider this thread for oom kill, it's ineligible, - OOM_SCAN_ABORT: abort the iteration and return, or - OOM_SCAN_SELECT: always select this thread with the highest badness possible. There is no functional change with this patch. This new helper function will be used in the next patch in the memory controller. Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
-
David Rientjes authored
mem_cgroup_out_of_memory() is defined in mm/oom_kill.c, so declare it in linux/oom.h rather than linux/memcontrol.h. Acked-by:
-
Jiang Liu authored
Mark functions used by both boot and memory hotplug as __meminit to reduce memory footprint when memory hotplug is disabled. Alos guard zone_pcp_update() with CONFIG_MEMORY_HOTPLUG because it's only used by memory hotplug code. Signed-off-by:
Jiang Liu <liuj97@gmail.com> Cc: Wei Wang <Bessel.Wang@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Keping Chen <chenkeping@huawei.com> Signed-off-by:
-
Jiang Liu authored
When a zone becomes empty after memory offlining, free zone->pageset. Otherwise it will cause memory leak when adding memory to the empty zone again because build_all_zonelists() will allocate zone->pageset for an empty zone. Signed-off-by:
Wei Wang <Bessel.Wang@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Keping Chen <chenkeping@huawei.com> Signed-off-by:
-
Jiang Liu authored
When online_pages() is called to add new memory to an empty zone, it rebuilds all zone lists by calling build_all_zonelists(). But there's a bug which prevents the new zone to be added to other nodes' zone lists. online_pages() { build_all_zonelists() ..... node_set_state(zone_to_nid(zone), N_HIGH_MEMORY) } Here the node of the zone is put into N_HIGH_MEMORY state after calling build_all_zonelists(), but build_all_zonelists() only adds zones from nodes in N_HIGH_MEMORY state to the fallback zone lists. build_all_zonelists() ->__build_all_zonelists() ->build_zonelists() ->find_next_best_node() ->for_each_node_state(n, N_HIGH_MEMORY) So memory in the new zone will never be used by other nodes, and it may cause strange behavor when system is under memory pressure. So put node into N_HIGH_MEMORY state before calling build_all_zonelists(). Signed-off-by:Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
-
Jiang Liu authored
When hotadd_new_pgdat() is called to create new pgdat for a new node, a fallback zonelist should be created for the new node. There's code to try to achieve that in hotadd_new_pgdat() as below: /* * The node we allocated has no zone fallback lists. For avoiding * to access not-initialized zonelist, build here. */ mutex_lock(&zonelists_mutex); build_all_zonelists(pgdat, NULL); mutex_unlock(&zonelists_mutex); But it doesn't work as expected. When hotadd_new_pgdat() is called, the new node is still in offline state because node_set_online(nid) hasn't been called yet. And build_all_zonelists() only builds zonelists for online nodes as: for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); build_zonelists(pgdat); build_zonelist_cache(pgdat); } Though we hope to create zonelist for the new pgdat, but it doesn't. So add a new parameter "pgdat" the build_all_zonelists() to build pgdat for the new pgdat too. Signed-off-by:Xishi Qiu <qiuxishi@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Keping Chen <chenkeping@huawei.com> Signed-off-by:
-
Wanpeng Li authored
Signed-off-by:
Wanpeng Li <liwp.linux@gmail.com> Acked-by:
-
Wanpeng Li authored
Signed-off-by:
-
Wanpeng Li authored
Signed-off-by:
-
Xishi Qiu authored
On architectures with CONFIG_HUGETLB_PAGE_SIZE_VARIABLE set, such as Itanium, pageblock_order is a variable with default value of 0. It's set to the right value by set_pageblock_order() in function free_area_init_core(). But pageblock_order may be used by sparse_init() before free_area_init_core() is called along path: sparse_init() ->sparse_early_usemaps_alloc_node() ->usemap_size() ->SECTION_BLOCKFLAGS_BITS ->((1UL << (PFN_SECTION_SHIFT - pageblock_order)) * NR_PAGEBLOCK_BITS) The uninitialized pageblock_size will cause memory wasting because usemap_size() returns a much bigger value then it's really needed. For example, on an Itanium platform, sparse_init() pageblock_order=0 usemap_size=24576 free_area_init_core() before pageblock_order=0, usemap_size=24576 free_area_init_core() after pageblock_order=12, usemap_size=8 That means 24K memory has been wasted for each section, so fix it by calling set_pageblock_order() from sparse_init(). Signed-off-by: -
Jeff Liu authored
Call up_read(&mm->mmap_sem) directly since we have already got mm via current->mm at the beginning of print_vma_addr(). Signed-off-by:
Jie Liu <jeff.liu@oracle.com> Signed-off-by:
-
Minchan Kim authored
09f363c7 ("vmscan: fix shrinker callback bug in fs/super.c") fixed a shrinker callback which was returning -1 when nr_to_scan is zero, which caused excessive slab scanning. But 635697c6 ("vmscan: fix initial shrinker size handling") fixed the problem, again so we can freely return -1 although nr_to_scan is zero. So let's revert 09f363c7 because the comment added in 09f363c7 made an unnecessary rule. Signed-off-by:
-
Rabin Vincent authored
0ee332c1 ("memblock: Kill early_node_map[]") wanted to replace CONFIG_ARCH_POPULATES_NODE_MAP with CONFIG_HAVE_MEMBLOCK_NODE_MAP but ended up replacing one occurence with a reference to the non-existent symbol CONFIG_HAVE_MEMBLOCK_NODE. The resulting omission of code would probably have been causing problems to 32-bit machines with memory hotplug. Signed-off-by:
Rabin Vincent <rabin@rab.in> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Rik van Riel authored
Order > 0 compaction stops when enough free pages of the correct page order have been coalesced. When doing subsequent higher order allocations, it is possible for compaction to be invoked many times. However, the compaction code always starts out looking for things to compact at the start of the zone, and for free pages to compact things to at the end of the zone. This can cause quadratic behaviour, with isolate_freepages starting at the end of the zone each time, even though previous invocations of the compaction code already filled up all free memory on that end of the zone. This can cause isolate_freepages to take enormous amounts of CPU with certain workloads on larger memory systems. The obvious solution is to have isolate_freepages remember where it left off last time, and continue at that point the next time it gets invoked for an order > 0 compaction. This could cause compaction to fail if cc->free_pfn and cc->migrate_pfn are close together initially, in that case we restart from the end of the zone and try once more. Forced full (order == -1) compactions are left alone. [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: s/laste/last/, use 80 cols] Signed-off-by:
Rik van Riel <riel@redhat.com> Reported-by:
Jim Schutt <jaschut@sandia.gov> Tested-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Wanpeng Li authored
Replace memory_cgroup_xxx() with memcg_xxx() Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Glauber Costa authored
I have an application that does the following: * copy the state of all controllers attached to a hierarchy * replicate it as a child of the current level. I would expect writes to the files to mostly succeed, since they are inheriting sane values from parents. But that is not the case for use_hierarchy. If it is set to 0, we succeed ok. If we're set to 1, the value of the file is automatically set to 1 in the children, but if userspace tries to write the very same 1, it will fail. That same situation happens if we set use_hierarchy, create a child, and then try to write 1 again. Now, there is no reason whatsoever for failing to write a value that is already there. It doesn't even match the comments, that states: /* If parent's use_hierarchy is set, we can't make any modifications * in the child subtrees... since we are not changing anything. So test the new value against the one we're storing, and automatically return 0 if we're not proposing a change. Signed-off-by:
Glauber Costa <glommer@parallels.com> Cc: Dhaval Giani <dhaval.giani@gmail.com> Acked-by:
-
Wanpeng Li authored
Signed-off-by:
-
Andrew Morton authored
Sanity: CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM [mhocko@suse.cz: fix missed bits] Cc: Glauber Costa <glommer@parallels.com> Acked-by:
-
Minchan Kim authored
The __count_immobile_pages() naming is rather awkward. Choose a more clear name and add a comment. Signed-off-by:
-
Minchan Kim authored
d179e84b ("mm: vmscan: do not use page_count without a page pin") fixed this problem in vmscan.c but same problem is in __count_immobile_pages(). I copy and paste d179e84b's contents for description. "It is unsafe to run page_count during the physical pfn scan because compound_head could trip on a dangling pointer when reading page->first_page if the compound page is being freed by another CPU." Signed-off-by:
-
David Rientjes authored
The number of ptes and swap entries are used in the oom killer's badness heuristic, so they should be shown in the tasklist dump. This patch adds those fields and replaces cpu and oom_adj values that are currently emitted. Cpu isn't interesting and oom_adj is deprecated and will be removed later this year, the same information is already displayed as oom_score_adj which is used internally. At the same time, make the documentation a little more clear to state this information is helpful to determine why the oom killer chose the task it did to kill. Signed-off-by:
-
David Rientjes authored
/proc/sys/vm/oom_kill_allocating_task will immediately kill current when the oom killer is called to avoid a potentially expensive tasklist scan for large systems. Currently, however, it is not checking current's oom_score_adj value which may be OOM_SCORE_ADJ_MIN, meaning that it has been disabled from oom killing. This patch avoids killing current in such a condition and simply falls back to the tasklist scan since memory still needs to be freed. Signed-off-by:
-
KOSAKI Motohiro authored
commit 2ff754fa ("mm: clear pages_scanned only if draining a pcp adds pages to the buddy allocator again") fixed one free_pcppages_bulk() misuse. But two another miuse still exist. This patch fixes it. Signed-off-by:
-
KOSAKI Motohiro authored
Eric Wong reported his test suite failex when /tmp is tmpfs. https://lkml.org/lkml/2012/2/24/479 Currentlt the input check of POSIX_FADV_WILLNEED has two problems. - requires a_ops->readpage. But in fact, force_page_cache_readahead() requires that the target filesystem has either ->readpage or ->readpages. - returns -EINVAL when the filesystem doesn't have ->readpage. But posix says that fadvise is merely a hint. Thus fadvise() should return 0 if filesystem has no means of implementing fadvise(). The userland application should not know nor care whcih type of filesystem backs the TMPDIR directory, as Eric pointed out. There is nothing which userspace can do to solve this error. So change the return value to 0 when filesytem doesn't support readahead. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Eric Wong <normalperson@yhbt.net> Tested-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by:
-
Gavin Shan authored
When CONFIG_COMPACTION is enabled, compaction_deferred() tries to recalculate the deferred limit again, which isn't necessary. When CONFIG_COMPACTION is disabled, compaction_deferred() should return "true" or "false" since it has "bool" for its return value. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Acked-by:
-
KAMEZAWA Hiroyuki authored
mem_cgroup_force_empty_list() just returns 0 or -EBUSY and -EBUSY indicates 'you need to retry'. Make mem_cgroup_force_empty_list() return a bool to simplify the logic. [akpm@linux-foundation.org: rework mem_cgroup_force_empty_list()'s comment] Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Signed-off-by:
-
Kamezawa Hiroyuki authored
After bf544fdc241da8 "memcg: move charges to root cgroup if use_hierarchy=0 in mem_cgroup_move_hugetlb_parent()" mem_cgroup_move_parent() returns only -EBUSY or -EINVAL. So we can remove the -ENOMEM and -EINTR checks. Signed-off-by:
-
Kamezawa Hiroyuki authored
After bf544fdc241da8 "memcg: move charges to root cgroup if use_hierarchy=0 in mem_cgroup_move_hugetlb_parent()", no memory reclaim will occur when removing a memory cgroup. If -EINTR is returned here, cgroup will show a warning. We don't need to handle any user interruption signal. Remove this. Signed-off-by:
-
Andrew Morton authored
This function is an 80-column eyesore, quite unnecessarily. Clean that up, and use standard comment layout style. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg Pearson <greg.pearson@hp.com> Cc: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
David Rientjes authored
The oom killer currently schedules away from current in an uninterruptible sleep if it does not have access to memory reserves. It's possible that current was killed because it shares memory with the oom killed thread or because it was killed by the user in the interim, however. This patch only schedules away from current if it does not have a pending kill, i.e. if it does not share memory with the oom killed thread. It's possible that it will immediately retry its memory allocation and fail, but it will immediately be given access to memory reserves if it calls the oom killer again. This prevents the delay of memory freeing when threads that share memory with the oom killed thread get unnecessarily scheduled. Signed-off-by:
-
Aneesh Kumar K.V authored
We already hold the hugetlb_lock. That should prevent a parallel cgroup rmdir from touching page's hugetlb cgroup. So remove the exclude and wakeup calls. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by:
-
Aneesh Kumar K.V authored
A page's hugetlb cgroup assignment and movement to the active list should occur with hugetlb_lock held. Otherwise when we remove the hugetlb cgroup we will iterate the active list and find pages with NULL hugetlb cgroup values. Signed-off-by:
-
Aneesh Kumar K.V authored
When we fail to allocate pages from the reserve pool, hugetlb tries to allocate huge pages using alloc_buddy_huge_page. Add these to the active list. We also need to add the huge page we allocate when we soft offline the oldpage to active list. Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
