When system uses fw direct loading, then psp context structure won't be
initiliazed. And it is also unable to execute mode reset.

[  434.601474] amdgpu 0000:0c:00.0: GPU reset begin!
[  434.694326] amdgpu 0000:0c:00.0: GPU reset
[  434.743152] BUG: unable to handle kernel NULL pointer dereference at
0000000000000058
[  434.838474] IP: psp_gpu_reset+0xc/0x30 [amdgpu]
[  434.893532] PGD 406ed9067
[  434.893533] P4D 406ed9067
[  434.926376] PUD 400b46067
[  434.959217] PMD 0
[  435.033379] Oops: 0000 [#1] SMP
[  435.072573] Modules linked in: amdgpu(OE) chash(OE) gpu_sched(OE) ttm(OE)
drm_kms_helper(OE) drm(OE) fb_sys_fops syscopyarea sysfillrect sysimgblt
rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache snd_hda_codec_realtek
snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_codec
snd_hda_core snd_hwdep snd_pcm edac_mce_amd snd_seq_midi snd_seq_midi_event
kvm_amd snd_rawmidi kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq
ghash_clmulni_intel snd_seq_device pcbc snd_timer eeepc_wmi aesni_intel snd
asus_wmi aes_x86_64 sparse_keymap crypto_simd glue_helper joydev soundcore
wmi_bmof cryptd video i2c_piix4 shpchp 8250_dw i2c_designware_platform mac_hid
i2c_designware_core sunrpc parport_pc ppdev lp parport autofs4 hid_generic igb
usbhid dca ptp mxm_wmi pps_core ahci hid i2c_algo_bit
[  435.931754]  libahci wmi
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With this the dGPU turns on correctly.
Signed-off-by: Nico Sneck <nicosneck@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

A few fixes for 4.17:
- Fix a potential use after free in a error case
- Fix pcie lane handling in amdgpu SI dpm
- sdma pipeline sync fix
- A few vega12 cleanups and fixes
- Misc other fixes

* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: Fix memory leaks at amdgpu_init() error path
  drm/amdgpu: Fix PCIe lane width calculation
  drm/radeon: Fix PCIe lane width calculation
  drm/amdgpu/si: implement get/set pcie_lanes asic callback
  drm/amdgpu: Add support for SRBM selection v3
  Revert "drm/amdgpu: Don't change preferred domian when fallback GTT v5"
  drm/amd/powerply: fix power reading on Fiji
  drm/amd/powerplay: Enable ACG SS feature
  drm/amdgpu/sdma: fix mask in emit_pipeline_sync
  drm/amdgpu: Fix KIQ hang on bare metal for device unbind/bind back v2.
  drm/amd/pp: Clean header file in vega12_smumgr.c
  drm/amd/pp: Remove Dead functions on Vega12
  drm/amd/pp: silence a static checker warning
  drm/amdgpu: drop compute ring timeout setting for non-sriov only (v2)
  drm/amdgpu: fix typo of domain fallback

Merge tag 'drm-misc-next-fixes-2018-04-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

hda_intel: Don't declare azx PM ops if VGA_SWITCHEROO configured (Lukas)

Cc: Lukas Wunner <lukas@wunner.de>
Cc: Takashi Iwai <tiwai@suse.de>

* tag 'drm-misc-next-fixes-2018-04-04' of git://anongit.freedesktop.org/drm/drm-misc:
  ALSA: hda - Silence PM ops build warning

amdgpu driver checks vgacon_text_force() after some initializations
but without cleaning up.  This will result in leaks.

Move the check of vgacon_text_force() to the beginning of
amdgpu_init() for fixing it and also for optimization.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and
ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting
value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere.
Port of the radeon fix to amdgpu.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=102553Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Two years ago I tried an AMD Radeon E8860 embedded GPU with the drm driver.
The dmesg output included driver warnings about an invalid PCIe lane width.
Tracking the problem back led to si_set_pcie_lane_width_in_smc().
The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and
ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting
value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere.
Applying the increment silenced the warnings.
The code has not changed since, so either my analysis was incorrect or the
bug has gone unnoticed. Hence submitting this as an RFC.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Required for dpm setup on some asics. Fixes a NULL dereference
on asics that require it.
Acked-by: Christian König <christian.koenig@amd.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=102553Tested-by: Abel Garcia Dorta <mercuriete@yahoo.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Also remove code duplication in write and read regs functions.
This also fixes potential missing unlock in amdgpu_debugfs_regs_write
in case get_user would fail.

v2: Add SRBM mutex locking.
v3: Fix TO counter and fix comment location.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit bbaf1871ea1d7b7021e350a3e8bb1ec8408c2030.

Felix reports this commit causes regression.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Power value is wrong reported by customer. It is a regression by

commit a7c7bc4c
Author: Rex Zhu <Rex.Zhu@amd.com>
Date:   Mon Mar 27 15:32:59 2017 +0800

    drm/amd/powerplay: reduce sample period time

    for power readings.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The theoretical sampling period is from 50ms to 4sec, original 2sec
is long but correct, and 20ms is too short. change it to more
reasonable 200ms.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Port the atomfirmware.h and populates the
updated pptable to SMU.With the new parameters
in the new pptable, the ACG SS feature is enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Needs to be a 32 bit mask.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Problem: When unbind and then bind back the device KIQ hangs on Vega
after mapping KCQs request.

Fix: Adding deinitialzie code from CAIL  during HW fini solves the
hang.

v2: use srbm_mutex around soc15_grbm_select()
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove Vega12 DIDT config functions.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This has a static checker warning because "frev" and "crev" can be
uninitialized if "info" is NULL.  I just changed the order of the checks
so that we check "info" first.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Sriov still wants these error messags on timeout. So, for sriov
use case, the timeout setting on compute rings is kept.

-v2: clean the code
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The system sleep PM ops azx_suspend() and azx_resume() were previously
called by vga_switcheroo, but commit 07f4f97d ("vga_switcheroo: Use
device link for HDA controller") removed their invocation.

Unfortunately the commit neglected to update the #ifdef surrounding the
two functions, so if CONFIG_PM_SLEEP is *not* enabled but all three of
CONFIG_PM, CONFIG_VGA_SWITCHEROO and CONFIG_SND_HDA_CODEC_HDMI *are*
enabled, the compiler now emits the following warning:

sound/pci/hda/hda_intel.c:1024:12: warning: 'azx_resume' defined but not used [-Wunused-function]
 static int azx_resume(struct device *dev)
            ^~~~~~~~~~
sound/pci/hda/hda_intel.c:989:12: warning: 'azx_suspend' defined but not used [-Wunused-function]
 static int azx_suspend(struct device *dev)
            ^~~~~~~~~~~

Silence by updating the #ifdef.  Because the #ifdef block now uses the
same condition as the one immediately succeeding it, the two blocks can
be collapsed together, shaving off another two lines.

Fixes: 07f4f97d ("vga_switcheroo: Use device link for HDA controller")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.kernel.org/patch/10313441/
Link: https://patchwork.freedesktop.org/patch/msgid/b8e70e34a9acbd4f0a1a6c7673cea96888ae9503.1522323444.git.lukas@wunner.de

- Mask mode type garbage from userspace (Ville)

Something went wrong on the misc tree side, but I'll pull the patch directly.

* 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc:
  drm: Fix uabi regression by allowing garbage mode->type from userspace

- GPUVM support for dGPUs
- KFD events support for dGPUs
- Fix live-lock situation when restoring multiple evicted processes
- Fix VM page table allocation on large-bar systems
- Fix for build failure on frv architecture

* tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Use ordered workqueue to restore processes
  drm/amdgpu: Fix acquiring VM on large-BAR systems
  drm/amdkfd: Add module option for testing large-BAR functionality
  drm/amdkfd: Kmap event page for dGPUs
  drm/amdkfd: Add ioctls for GPUVM memory management
  drm/amdkfd: Add TC flush on VMID deallocation for Hawaii
  drm/amdkfd: Allocate CWSR trap handler memory for dGPUs
  drm/amdkfd: Add per-process IDR for buffer handles
  drm/amdkfd: Aperture setup for dGPUs
  drm/amdkfd: Remove limit on number of GPUs
  drm/amdkfd: Populate DRM render device minor
  drm/amdkfd: Create KFD VMs on demand
  drm/amdgpu: Add kfd2kgd interface to acquire an existing VM
  drm/amdgpu: Add helper to turn an existing VM into a compute VM
  drm/amdgpu: Fix initial validation of PD BO for KFD VMs
  drm/amdgpu: Move KFD-specific fields into struct amdgpu_vm
  drm/amdkfd: fix uninitialized variable use
  drm/amdkfd: add missing include of mm.h

Merge tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Display fixes for booting with MST hub lid closed and display
  freezing after hibernation (fd.o bugs 105470 & 105196)
- Fix for a very rare interrupt handling race resulting in GPU hang

* tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915: Fix hibernation with ACPI S0 target state
  drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
  drm/i915: Specify which engines to reset following semaphore/event lockups
  drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.

Linux 4.16-rc7

This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.

After

commit dd9f31c7
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Aug 16 17:46:07 2017 +0300

    drm/i915/gen9+: Set same power state before hibernation image
    save/restore

during hibernation/suspend the power domain functionality got disabled,
after which resume could leave it incorrectly disabled if the ACPI
target state was S0 during suspend and i915 was not loaded by the loader
kernel.

This was caused by not considering if we resumed from hibernation as the
condition for power domains reiniting.

Fix this by simply tracking if we suspended power domains during system
suspend and reinit power domains accordingly during resume. This will
result in reiniting power domains always when resuming from hibernation,
regardless of the platform and whether or not i915 is loaded by the
loader kernel.

The reason we didn't catch this earlier is that the enabled/disabled
state of power domains during PMSG_FREEZE/PMSG_QUIESCE is platform
and kernel config dependent: on my SKL the target state is S4
during PMSG_FREEZE and (with the driver loaded in the loader kernel)
S0 during PMSG_QUIESCE. On the reporter's machine it's S0 during
PMSG_FREEZE but (contrary to this) power domains are not initialized
during PMSG_QUIESCE since i915 is not loaded in the loader kernel, or
it's loaded but without the DMC firmware being available.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105196
Reported-and-tested-by: amn-bas@hotmail.com
Fixes: dd9f31c7 ("drm/i915/gen9+: Set same power state before hibernation image save/restore")
Cc: amn-bas@hotmail.com
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322143642.26883-1-imre.deak@intel.com
(cherry picked from commit 0f90603c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

We were relying on the uncached reads when processing the CSB to provide
ourselves with the serialisation with the interrupt handler (so we could
detect new interrupts in the middle of processing the old one). However,
in commit 767a983a ("drm/i915/execlists: Read the context-status HEAD
from the HWSP") those uncached reads were eliminated (on one path at
least) and along with them our serialisation. The result is that we
would very rarely miss notification of a new interrupt and leave a
context-switch unprocessed, hanging the GPU.

Fixes: 767a983a ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321091027.21034-1-chris@chris-wilson.co.uk
(cherry picked from commit 9153e6b7)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

If the GPU is stuck waiting for an event or for a semaphore, we need to
reset the GPU in order to recover. We have to tell the reset routine
which engines we want reset, but we were still using the old interface
and declaring it as "not-fatal".

Fixes: 14b730fc ("drm/i915/tdr: Prepare error handler to accept mask of hung engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk
(cherry picked from commit ca98317b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

If bios sets up an MST output and hardware state readout code sees this is
an SST configuration, when disabling the encoder we end up calling
->post_disable_dp() hook instead of the MST version. Consequently, we write
to the DP_SET_POWER dpcd to set it D3 state. Further along when we try
enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up
the MST hub. This results in continuous link training failures which keep
the system busy delaying boot. We could identify bios MST boot discrepancy
and handle it accordingly but a simple way to solve this is to write to the
DP_SET_POWER dpcd for MST too.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5ea2355a ("drm/i915/mst: Use MST sideband message transactions for dpms control")
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit ad260ab3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Last pull for 4.17.  Highlights:
- Vega12 support
- A few more bug fixes and cleanups for powerplay

* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (77 commits)
  drm/amd/pp: clean header file hwmgr.h
  drm/amd/pp: use mlck_table.count for array loop index limit
  drm/amdgpu: Add an ATPX quirk for hybrid laptop
  drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
  drm/amd/pp: Add new asic support in pp_psm.c
  drm/amd/pp: Clean up powerplay code on Vega12
  drm/amd/pp: Add smu irq handlers for legacy asics
  drm/amd/pp: Fix set wrong temperature range on smu7
  drm/amdgpu: Don't change preferred domian when fallback GTT v5
  drm/amdgpu: Fix NULL ptr on driver unload due to init failure.
  drm/amdgpu: fix "mitigate workaround for i915"
  drm/amd/pp: Add smu irq handlers in sw_init instand of hw_init
  drm/amd/pp: Refine register_thermal_interrupt function
  drm/amdgpu: Remove wrapper layer of cgs irq handling
  drm/amd/powerplay: Return per DPM level clock
  drm/amd/powerplay: Remove the SOC floor voltage setting
  drm/amdgpu: no job timeout setting on compute queues
  drm/amdgpu: add vega12 pci ids (v2)
  drm/amd/powerplay: add the hw manager for vega12 (v4)
  drm/amd/powerplay: add the smu manager for vega12 (v4)
  ...

Pull dmaengine fix from Vinod Koul:
 "One small fix for stm32-dmamux fixing buffer overflow"

* tag 'dmaengine-fix-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma:
  dmaengine: stm32-dmamux: fix a potential buffer overflow

Pull x86 and PTI fixes from Ingo Molnar:
 "Misc fixes:

   - fix EFI pagetables freeing

   - fix vsyscall pagetable setting on Xen PV guests

   - remove ancient CONFIG_X86_PPRO_FENCE=y - x86 is TSO again

   - fix two binutils (ld) development version related incompatibilities

   - clean up breakpoint handling

   - fix an x86 self-test"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Don't use IST entry for #BP stack
  x86/efi: Free efi_pgd with free_pages()
  x86/vsyscall/64: Use proper accessor to update P4D entry
  x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk
  x86/boot/64: Verify alignment of the LOAD segment
  x86/build/64: Force the linker to use 2MB page size
  selftests/x86/ptrace_syscall: Fix for yet more glibc interference

Pull timer fix from Ingo Molnar:
 "Make posix clock ID usage Spectre-safe"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-timers: Protect posix clock array access against speculation

Pull scheduler fixes from Ingo Molnar:
 "Two sched debug output related fixes: a console output fix and
  formatting fixes"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Adjust newlines for better alignment
  sched/debug: Fix per-task line continuation for console output

Pull perf fixes from Ingo Molnar:
 "Misc kernel side fixes.

  Generic:
   - cgroup events counting fix

  x86:
   - Intel PMU truncated-parameter fix

   - RDPMC fix

   - API naming fix/rename

   - uncore driver big-hardware PCI enumeration fix

   - uncore driver filter constraint fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/cgroup: Fix child event counting bug
  perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers
  perf/x86/intel: Rename confusing 'freerunning PEBS' API and implementation to 'large PEBS'
  perf/x86/intel/uncore: Add missing filter constraint for SKX CHA event
  perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()
  perf/x86/intel: Disable userspace RDPMC usage for large PEBS

Pull locking fixes from Ingo Molnar:
 "Two fixes: tighten up a jump-labels warning to not trigger on certain
  modules and fix confusing (and non-existent) mutex API documentation"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  jump_label: Disable jump labels in __exit code
  locking/mutex: Improve documentation

Tabs on a console with long lines do not wrap properly, so correctly
account for the line length when computing the tab placement location.
Reported-by: James Holderness <j4_james@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull mqueuefs revert from Eric Biederman:
 "This fixes a regression that came in the merge window for v4.16.

  The problem is that the permissions for mounting and using the
  mqueuefs filesystem are broken. The necessary permission check is
  missing letting people who should not be able to mount mqueuefs mount
  mqueuefs. The field sb->s_user_ns is set incorrectly not allowing the
  mounter of mqueuefs to remount and otherwise have proper control over
  the filesystem.

  Al Viro and I see the path to the necessary fixes differently and I am
  not even certain at this point he actually sees all of the necessary
  fixes. Given a couple weeks we can probably work something out but I
  don't see the review being resolved in time for the final v4.16. I
  don't want v4.16 shipping with a nasty regression. So unfortunately I
  am sending a revert"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  Revert "mqueue: switch to on-demand creation of internal mount"

This reverts commit 36735a6a.

Aleksa Sarai <asarai@suse.de> writes:
> [REGRESSION v4.16-rc6] [PATCH] mqueue: forbid unprivileged user access to internal mount
>
> Felix reported weird behaviour on 4.16.0-rc6 with regards to mqueue[1],
> which was introduced by 36735a6a ("mqueue: switch to on-demand
> creation of internal mount").
>
> Basically, the reproducer boils down to being able to mount mqueue if
> you create a new user namespace, even if you don't unshare the IPC
> namespace.
>
> Previously this was not possible, and you would get an -EPERM. The mount
> is the *host* mqueue mount, which is being cached and just returned from
> mqueue_mount(). To be honest, I'm not sure if this is safe or not (or if
> it was intentional -- since I'm not familiar with mqueue).
>
> To me it looks like there is a missing permission check. I've included a
> patch below that I've compile-tested, and should block the above case.
> Can someone please tell me if I'm missing something? Is this actually
> safe?
>
> [1]: https://github.com/docker/docker/issues/36674

The issue is a lot deeper than a missing permission check.  sb->s_user_ns
was is improperly set as well.  So in addition to the filesystem being
mounted when it should not be mounted, so things are not allow that should
be.

We are practically to the release of 4.16 and there is no agreement between
Al Viro and myself on what the code should looks like to fix things properly.
So revert the code to what it was before so that we can take our time
and discuss this properly.

Fixes: 36735a6a ("mqueue: switch to on-demand creation of internal mount")
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Reported-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull pin control fixes from Linus Walleij:
 "Two fixes for pin control for v4.16:

   - Renesas SH-PFC: remove a duplicate clkout pin which was causing
     crashes

   - fix Samsung out of bounds exceptions"

* tag 'pinctrl-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: samsung: Validate alias coming from DT
  pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[]