- 16 Jan, 2019 40 commits
-
-
Chen-Yu Tsai authored
The CSI controller found on the H3 (and H5) is a reduced version of the one found on the A31. It only has 1 channel, instead of 4 channels for time-multiplexed BT.656. Since the H3 is a reduced version, it cannot "fallback" to a compatible that implements more features than it supports. Add a compatible string entry for the H3. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Reviewed-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Chen-Yu Tsai authored
The CSI controller found on the H3 (and H5) is a reduced version of the one found on the A31. It only has 1 channel, instead of 4 channels for time-multiplexed BT.656. Since the H3 is a reduced version, it cannot "fallback" to a compatible that implements more features than it supports. Split out the H3 compatible as a separate entry, with no fallback. Fixes: b7eadaa3 ("media: dt-bindings: media: sun6i: Add A31 and H3 compatibles") Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sakari Ailus authored
Some little style fixup work. Signed-off-by:
-
Petr Cvek authored
Control handlers registration lacked error path with v4l2_ctrl_handler_free() call. Fix it by using goto to alread existing v4l2_ctrl_handler_free() call. Signed-off-by:
Petr Cvek <petrcvekcz@gmail.com> Signed-off-by:
-
Petr Cvek authored
An array which defines sensor's supported formats is not written anywhere, so it can be constant. Signed-off-by:
-
Petr Cvek authored
Some returns were adjoined to unrelated code blocks. This patch adds a space inbetween. Signed-off-by:
-
Petr Cvek authored
The driver uses variables to store frame resolutions and to indexing various arrays. These should be unsigned. Signed-off-by:
-
Petr Cvek authored
Add missing SPDX identifiers to .c and .h files of the sensor driver. Signed-off-by:
-
Petr Cvek authored
The soc_camera drivers are marked as orphaned. Add Petr Cvek as a new maintainer for ov9640 driver after its switch from the soc_camera. Signed-off-by:
-
Petr Cvek authored
This patch removes the dependency on an obsoleted soc_camera from ov9640 driver and changes the code to be a standalone v4l2 async subdevice. It also adds GPIO allocations for power and reset signals (as they are not handled by soc_camera now). The values for waiting on GPIOs (reset and power) settling down were taken from the datasheet (> 1 ms after HW/SW reset). The upper limit was chosen as an arbitrary value. Also one occurrence of mdelay() was changed to msleep(). The delays were successfully tested on a real hardware. The patch makes ov9640 sensor again compatible with the pxa_camera driver. Signed-off-by:
-
Petr Cvek authored
Initial part of ov9640 transition from soc_camera subsystem to a standalone v4l2 subdevice. The soc_camera version seems to be used only in Palm Zire72 and in (the future) HTC Magician. On these two devices the support is broken as pxa_camera driver doesn't use soc_camera anymore. The other mentions from git grep are "TODOs" (in board-osk.c) or chip names for unsupported sensors on HW which doesn't use soc_camera at all (irelevant). Copy the driver files from soc_camera and mark the original ones in the Kconfig description as obsoleted. Add config option VIDEO_OV9640 to the build files in drivers/media/i2c. Signed-off-by:
-
Jacopo Mondi authored
The following commits: commit f6dd927f ("[media] media: ov7670: calculate framerate properly for ov7675") commit 04ee6d92 ("[media] media: ov7670: add possibility to bypass pll for ov7675") introduced the ability to bypass PLL multiplier and use input clock (xvclk) as pixel clock output frequency for ov7675 sensor. PLL is bypassed using register DBLV[7:6], according to ov7670 and ov7675 sensor manuals. Macros used to set DBLV register seem wrong in the driver, as their values do not match what reported in the datasheet. Fix by changing DBLV_* macros to use bits [7:6] and set bits [3:0] to default 0x0a reserved value (according to datasheets). While at there, remove a write to DBLV register in "ov7675_set_framerate()" that over-writes the previous one to the same register that takes "info->pll_bypass" flag into account instead of setting PLL multiplier to 4x unconditionally. And, while at there, since "info->pll_bypass" is only used in set/get_framerate() functions used by ov7675 only, it is not necessary to check for the device id at probe time to make sure that when using ov7670 "info->pll_bypass" is set to false. Fixes: f6dd927f ("[media] media: ov7670: calculate framerate properly for ov7675") Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Loic Poulain authored
OV5640 sensor supports raw image output (bayer). Configure ISP mux/format registers accordingly. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Manivannan Sadhasivam authored
The i2c address for the Omnivision OV5645 camera sensor is 0x3c. It is incorrectly mentioned as 0x78 in binding. Hence fix that. Fixes: 09c716af [media] media: i2c/ov5645: add the device tree binding document Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
-
Manivannan Sadhasivam authored
Commit "4adb0a04 media: ov5645: Supported external clock is 24MHz" modified the external clock frequency to be 24MHz instead of the 23.88MHz in driver. Hence, modify the frequency value in binding. Signed-off-by:
-
Akinobu Mita authored
This driver doesn't set all members of mbus format field when the VIDIOC_SUBDEV_{S,G}_FMT ioctls are called. This is detected by v4l2-compliance. Signed-off-by:Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
The VIDIOC_SUBDEV_G_FMT ioctl for this driver doesn't recognize V4L2_SUBDEV_FORMAT_TRY and always works as if V4L2_SUBDEV_FORMAT_ACTIVE is specified. Signed-off-by:
-
Akinobu Mita authored
Set default window and format code at probe time instead of always checking if they have not been set yet when VIDIOC_SUBDEV_G_FMT ioctl is called. This change simplifies the next patch (make VIDIOC_SUBDEV_G_FMT ioctl work with V4L2_SUBDEV_FORMAT_TRY). Signed-off-by:
-
Luca Ceresoli authored
The description of test patterns 11 and 12 are swapped. Checked against the live sensor. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Sakari Ailus authored
The device won't be powered off on systems that have no sensors connected unless it has a driver bound to it. Allow that to happen even if there are no sensors connected to cio2. Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Tested-by:
-
Pawe? Chmiel authored
This commit corrects max and step values for v4l2 control for V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1. It was found by using v4l2-compliance tool and checking result of VIDIOC_QUERY_EXT_CTRL/QUERYMENU test. Previously it was complaining that step was bigger than difference between max and min. Fixes: 15f4bc3b ("[media] s5p-jpeg: Add JPEG controls support") Signed-off-by:
Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Peter Rosin authored
Because it looks neater. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Fabrizio Castro authored
According to the RZ/G2 User's manual, RZ/G2E and R-Car E3 CSI-2 blocks are identical, therefore use R-Car E3 definitions to add RZ/G2E support. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Fabrizio Castro authored
According to the RZ/G2 User's manual, RZ/G2E and R-Car E3 VIN blocks are identical, therefore use R-Car E3 definitions to add RZ/G2E support. Signed-off-by:
-
Fabrizio Castro authored
Add the compatible string for RZ/G2E (a.k.a. R8A774C0) to the list of SoCs supported by rcar-vin driver. Signed-off-by:
-
Fabrizio Castro authored
Add the compatible string for RZ/G2E (a.k.a. R8A774C0) to the list of supported SoCs. Signed-off-by:
-
Niklas Söderlund authored
The driver fixed the TXA CSI-2 transmitter in 4-lane mode while it could operate using 1-, 2- and 4-lanes. Update the driver to support all available modes. The driver makes use of large tables of static register/value writes when powering up/down the TXA and TXB transmitters which include the write to the NUM_LANES register. By converting the tables into functions and using parameters the power up/down functions for TXA and TXB power up/down can be merged and used for both transmitters. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
-
Niklas Söderlund authored
The adv748x CSI-2 transmitters TXA and TXB can use different number of lanes to transmit data. In order to be able to configure the device correctly this information need to be parsed from device tree and stored in each TX private data structure. TXA supports 1, 2 and 4 lanes while TXB supports 1 lane. Signed-off-by:
-
Niklas Söderlund authored
Extend the MIPI CSI-2 power up sequence to match the power up sequence in the hardware manual chapter "9.5.1 Power Up Sequence". This change allows the power up functions to be reused when initializing the hardware reducing code duplicating as well aligning with the documentation. Signed-off-by:
-
Niklas Söderlund authored
The CSI-2 transmitters can use a different number of lanes to transmit data. Make the data-lanes mandatory for the endpoints that describe the transmitters as no good default can be set to fallback on. Signed-off-by:
-
Aditya Pakki authored
In sp8870_set_frontend_parameters, the function sp8870_readreg may return an error when i2c_transfer fails. The fix checks for this error and returns upstream consistent with other invocations. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Aditya Pakki authored
Write16 can return an error code -1 when the i2c_write fails. The fix checks for these failures and returns the error upstream Signed-off-by:
-
Ettore Chimenti authored
The actual value of the RC5 System Number (address) is stored in the IR_READ_DATA common register masked with 0x1F00 so it have to be shifted by 8 bits. Signed-off-by:
Ettore Chimenti <ek5.chimenti@gmail.com> Signed-off-by:
-
Colin Ian King authored
There are two return paths that do not kfree dvb_spi. Fix the memory leaks by returning via the exit label fail_adapter that will free dvi_spi. Detected by CoverityScan, CID#1475991 ("Resource Leak") Fixes: cb496cd4 ("media: cxd2880-spi: Add optional vcc regulator") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>? Signed-off-by:
-
Kangjie Lu authored
mt312_reset() may fail. Although it is called in the end of mt312_set_frontend(), we better check its status and return its error code upstream instead of 0. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Reviewed-by:
Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
-
Kangjie Lu authored
If lgdt3306a_read_reg() fails, the read data in "val" is incorrect, thus shouldn't be further used. The fix inserts a check for the return value of lgdt3306a_read_reg(). If it fails, goto fail. Signed-off-by:
-
Arnd Bergmann authored
All other drivers that need RC_CORE have a dependency rather than using 'select', so we should do the same here to avoid circular dependencies as well as this warning about missing dependencies: WARNING: unmet direct dependencies detected for RC_CORE Depends on [n]: INPUT [=n] Selected by [y]: - VIDEO_SECO_RC [=y] && MEDIA_SUPPORT [=y] && CEC_PLATFORM_DRIVERS [=y] && VIDEO_SECO_CEC [=y] Fixes: daef9576 ("media: seco-cec: add Consumer-IR support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Niklas Söderlund authored
The locking implemented in the async notifier callbacks are unnecessary as the global list_lock in v4l2-async.c is held whenever one of the callbacks are called. The locking in itself is not harmful however it produces a LOCKDEP warning between the global v4l2-async list_lock and the rcar-vin local locking schema. Remove the rcar-vin locking for the async callbacks to reduce complexity and silent the false LOCKDEP warning. Signed-off-by:
-
Akinobu Mita authored
Now the equivalent of FRACT_CMP() is added in v4l2 common internal API header. Signed-off-by:
-
Alexey Khoroshilov authored
tw9910 driver tries to sleep for the same period of time after each gpiod_set_value(). The patch moves duplicated code to a helper function. Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
