- 27 Jul, 2005 40 commits
-
-
Mikael Starvik authored
Use the generic IRQ framework Signed-off-by:
Mikael Starvik <starvik@axis.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Mikael Starvik authored
Added I/O and DMA allocators to be used by drivers. Signed-off-by:
-
Mikael Starvik authored
Updates to device drivers. * Use I/O and DMA allocators. * Use wait_event_interruptible instead of interrutiple_sleep_on. * Added spinlocks SMP. * Changed restore_flags to local_irq_restore etc. * Updated IDE driver include to fit 2.6.12. Signed-off-by:
-
Mikael Starvik authored
Improvements to crash debug code. Signed-off-by:
-
Mikael Starvik authored
Changes to console. * Added LF->CRLF translation * Make use of real console framework. Signed-off-by:
-
Mikael Starvik authored
Changes to configuration and build system. * Added v32 sub architecture. * Use generic hard IRQ. * Added SMP options. * Added options to OOPS at NMI and reboot at OOM. * Made it possible to set objtree. * Added option to select Kernel GDB serial port. * Corrected Kconfig usage. * Added system profiler. Signed-off-by:
-
Mikael Starvik authored
Changes necessary to make the sub-arch split complete. Signed-off-by:
-
Adrian Bunk authored
There's no help text for CONFIG_DEBUG_STACKOVERFLOW - add one. Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Adrian Bunk authored
There's no help text for CONFIG_DEBUG_STACKOVERFLOW - add one. Signed-off-by:
-
Yoichi Yuasa authored
This patch has removed obsolete GIU driver for vr41xx. This patch already has been applied to mips tree. Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
David Gibson authored
Presently the LparMap, one of the structures the kernel shares with the legacy iSeries hypervisor has a fixed offset address in head.S. This patch changes this so the LparMap is a normally initialized structure, without fixed address. This allows us to use macros to compute some of the values in the structure, which wasn't previously possible because the assembler always uses signed-% which gets the wrong answers for the computations in question. Unfortunately, a gcc bug means that doing this requires another structure (hvReleaseData) to be initialized in asm instead of C, but on the whole the result is cleaner than before. Signed-off-by:
David Gibson <dwg@au1.ibm.com> Signed-off-by:
-
David Gibson authored
PPC64 machines before Power4 need a segment table page allocated for each CPU. Currently these are allocated statically in a big array in head.S for all CPUs. The segment tables need to be in the first segment (so do_stab_bolted doesn't take a recursive fault on the stab itself), but other than that there are no constraints which require the stabs for the secondary CPUs to be statically allocated. This patch allocates segment tables dynamically during boot, using lmb_alloc() to ensure they are within the first 256M segment. This reduces the kernel image size by 192k... Tested on RS64 iSeries, POWER3 pSeries, and POWER5. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Olaf Hering authored
Making a few functions static saves a few bytes, but only on ppc32. text data bss dec hex filename 3752421 1605208 345608 5703237 570645 ../O-ppc64_iSeries_defconfig/vmlinux 3709411 2042552 339992 6091955 5cf4b3 ../O-ppc64_maple_defconfig/vmlinux 5397329 3054824 679856 9132009 8b57e9 ../O-ppc64_pSeries_defconfig/vmlinux -3882695 417552 197760 4498007 44a257 ../O-ppc_common_defconfig/vmlinux -3414510 574500 241440 4230450 408d32 ../O-ppc_pmac_defconfig/vmlinux +3882627 417168 197760 4497555 44a093 ../O-ppc_common_defconfig/vmlinux +3414442 575428 241440 4231310 40908e ../O-ppc_pmac_defconfig/vmlinux Signed-off-by:Olaf Hering <olh@suse.de> Signed-off-by:
-
Andrew Morton authored
genrtc.c won't compile on ppc64. Seems that ppc32 does support it though? We do this wrong btw - we should be selecting GEN_RTC in each arch/xxx/Kconfig. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Olaf Hering authored
This bites me all day when I use our default config for ppc64. We use a patch to fix the compile errors and provide the CONFIG_MAC_EMUMOUSEBTN functionality (which is behind CONFIG_INPUT_ADBHID). But Benh doesnt like it. http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003423.html Just hide all the ADB parts from via-pmu on ppc64 instead. drivers/macintosh/adbhid.c: In function `adbhid_init': drivers/macintosh/adbhid.c:1199: error: `_MACH_chrp' undeclared (first use in this function) drivers/macintosh/adbhid.c:1199: error: (Each undeclared identifier is reported only once drivers/macintosh/adbhid.c:1199: error: for each function it appears in.) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Olaf Hering authored
update defconfig, use new CONFIG_HZ and set it to 100 just for the kicks. Signed-off-by:
-
Kumar Gala authored
Added missing include of cpm2.h in correct order to allow TQM8260 to build Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
-
Eugene Surovegin authored
Fix the MAL channels count in PPC 440SP OCP definition. PPC 440SP has only 1 EMAC attached to MAL. Signed-off-by:
Eugene Surovegin <ebs@ebshome.net> Signed-off-by:
-
Matt Porter authored
The following trivial patch changes dma_map_page() to use page_to_bus() instead of open-coding it (incorrectly in some cases). Signed-off-by:
Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
-
Kumar Gala authored
Updated radstone_ppc7d_defconfig to include the ds1337 driver which is used by the platform code. This fixes the link error when building. Signed-off-by:
-
Kumar Gala authored
Updated prpmc750 platform code to include serial_reg.h to fix building. Signed-off-by:
-
Kumar Gala authored
Typo bug that was using PCI1 defines instead of PCI2 when setting up the second PCI bus controller on 85xx based systems. This hasn't been a real issue since currently the PCI2 sizes are the same as the PCI1 sizes for currently supported boards. Thanks to Andrew Klossner @ Xerox for point this out. Signed-off-by:
-
Downing, Thomas authored
The 2.6.12.3 kernel compilation fails for ARCH=ppc when CONFIG_PQ2FADS=y. This patch has been tested on Freescale PQ2FADS-ZU and -VR boards. Signed-off-by:
-
Marcelo Tosatti authored
On PPC 8xx, the DataTLBMiss handler does not jump directly to the page fault handler, as was the case in v2.4. It instead loads an invalid TLB which causes a subsequent DataTLBError exception. The comment on top of it haven't been update to reflect the change, though. Signed-off-by:
Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by:
-
Kumar Gala authored
The UARTs on the MPC824x are unique devices and really shouldn't be thought of as a DUART. In addition, if both UARTs are in use we need to configure the part to enable the 2nd UART since the pins for the UARTs are multiplexed. Adds support to run the 824x Sandpoint with both UARTs if desired. Signed-off-by:
Matt McClintock <msm@freescale.com> Signed-off-by:
-
Kumar Gala authored
Added a proper prototype for cpm2_reset() which gets rid of a build warning. Signed-off-by:
Jon Loeliger <jdl@freescale.com> Signed-off-by:
-
Olaf Hering authored
update pmac_defconfig enable all relevant options in common_defconfig, so it can serve as a compiletest for PPC_MULTIPLATFORM configuration Signed-off-by:
-
Olaf Hering authored
use new Kconfig.hz on ppc/ppc64, use also Kconfig.preempt for ppc Signed-off-by:
-
Andy Whitcroft authored
Originally __free_pages_bulk used the relative page number within a zone to define its buddies. This meant that to maintain the "maximally aligned" requirements (that an allocation of size N will be aligned at least to N physically) zones had to also be aligned to 1<<MAX_ORDER pages. When __free_pages_bulk was updated to use the relative page frame numbers of the free'd pages to pair buddies this released the alignment constraint on the 'left' edge of the zone. This allows _either_ edge of the zone to contain partial MAX_ORDER sized buddies. These simply never will have matching buddies and thus will never make it to the 'top' of the pyramid. The patch below removes a now redundant check ensuring that the mem_map was aligned to MAX_ORDER. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <christoph@lameter.com> Signed-off-by:
-
suzuki authored
The madvise() system call returns -EBADF for areas which does not map to files, only for *behaviour* request MADV_WILLNEED. According to man pages, madvise returns : EBADF - the map exists, but the area maps something that isn't a file. Fixes bug 2995. Signed-off-by:
Suzuki K P <suzuki@in.ibm.com> Signed-off-by:
-
Andrey Panin authored
Attached patch removes #ifdef CONFIG_WATCHDOG_NOWAYOUT mess duplicated in almost every watchdog driver and replaces it with common define in linux/watchdog.h. Signed-off-by:
Andrey Panin <pazke@donpac.ru> Signed-off-by:
-
Brian Gerst authored
powernow-k8.c: In function `query_current_values_with_pending_wait': powernow-k8.c:110: warning: `hi' may be used uninitialized in this function Signed-off-by:
Brian Gerst <bgerst@didntduck.org> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
David Ranson authored
Add support for the MRi PCIDS1 dual port serial card. This card is a little controversial since it is the subject of a PCI vendor/device ID clash. (See http://www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). I have for now just used the hex ID 0x950a. The divisor was part calculated part iterated, so may not be exactly correct (but works for me at all settings between 300 - 115300 bps). Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andrew Morton authored
For some reason halfmd4 isn't being linked into the kernel any more and modular ext3 wants it. So statically link the halfmd4 code into the kernel. Signed-off-by:
-
Andrew Morton authored
Fix bug identifued by Richard Purdie <rpurdie@rpsys.net>. oprofile calls check_user_page_readable() from interrupt context, so we deadlock over various VFS locks. But check_user_page_readable() doesn't imply either a read or a write of the page's contents. Change __follow_page() so that check_user_page_readable() can tell __follow_page() that we're not accessing the page's contents, and use that info to avoid the troublesome lock-takings. Also, make follow_page() inline for the single callsite in memory.c to save a bit of stack space. Signed-off-by:
-
Carsten Otte authored
Oliver Paukstadt from our test department is testing the xip patches in Linus' git-tree. He found a problem that shows when reading a file that contains sparse blocks (holes) on a -o xip mounted ext2 filesystem: the BUG_ON() in fs/ext2/xip.c:40 triggers where it should not. The problem was introduced by a cleanup in my previous patch, this patch fixes it. Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Pete Zaitcev authored
This patch fixes a microcode lockup in my CD-ROM adapters when a blank CD is inserted. However, do not try to burn CDs yet! I'm pretty sure that trying it will end in coasters. - Fix a few cases where we were unable to resynchronize with replies for previous commands. The main thing is to keep reading replies in case of a stall. This is done with the new state CLRRS. - Since I am forgetting the basic state machine already, document it. - Move counter increments in the looping path in its own function. - Fix a harmless buglet in case CSW read fails to submit: do not override state. - Implement the Alan Stern's idea for adaptive signature checking. Signed-off-by:
Pete Zaitcev <zaitcev@yahoo.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andi Kleen authored
All mempolicy changes must be inside the spinlock and readding the rb_erase prevents a crash while doing: > echo "1" > /tmp/numatest > numactl --length=0x4000 --shm /tmp/numatest --localalloc > numactl --length=0x2000 --offset=0 --shm /tmp/numatest --membind=0 > numactl --length=0x2000 --offset=0x2000 --shm /tmp/numatest --membind=1 > ipcs > ipcrm -M "the_key_value_of_this_shm_area" Based on a patch by John Blackwood Cc: <john.blackwood@ccur.com> Cc: <andrea@suse.de> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
V. ANANDA KRISHNAN authored
- updates the version - fix mixing of declarations and code. The mixing of declarations and code displays warnings when used against RedHat RHEL4.0 distro (compiler version is 3.4.3-22.1) and hence I separated them out. Signed-off-by:
-
