- 20 Jan, 2010 6 commits
-
-
Roel Kluin authored
Since UCR1_UARTEN is defined 1, the port was always treated as enabled. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Oskar Schirmer <os@emlix.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Fabian Godehardt <fg@emlix.com> Cc: Daniel Glöckner <dg@emlix.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
In that situation if the old rate is invalid and the new rate is invalid and the chip cannot do 9600 baud we report zero, which makes all the drivers explode. Instead force the rate based on min/max Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Stanislav Brabec authored
Perform a tricky suspend/resume even with no_console_suspend. With no_console_suspend, kernel skips serial port suspend/resume and the serial hardware may remain in undefined state after resume. It actually happens on devices that don't have BIOS that handle serial initialization. It makes impossible to use serial console after resume. Devices affected by this problem include: Sharp Zaurus devices Several PXA based ARM embedded boards The patch does: - Save the hardware state - Perform buffer flush in time of its suspend call - Tell the driver that port is suspended - But still accept new data - And keep console hardware in state that allows to send them It allows to capture late console messages without breaking console after resume. This is just a resend of a patch discussed in these threads, as the patch was not yet applied. "Possible suspend/resume regression in .32-rc?" (Nov 1-5, 2009, ARM list, later LKML) "serial-core: resume serial hardware with no_console_suspend" (Sep 15-Oct 18, 2009, LKML & ARM lists) Signed-off-by: Stanislav Brabec <sbrabec@suse.cz> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Tested-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Matthew Garrett authored
Wacom claims that the WACF namespace will always be devoted to serial Wacom tablets. Remove the existing entries and add a wildcard to avoid having to update the kernel every time they add a new device. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: Ping Cheng <pingc@wacom.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Nozomi goes wrong if you get the sequence open open close [stuff] close which turns out to occur on some ppp type setups. This is a quick patch up for the problem. It's not really fixing Nozomi which completely fails to implement tty open/close semantics and all the other needed stuff. Doing it right is a rather more invasive patch set and not one that will backport. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Atsushi Nemoto authored
After the commit fb07a5f8 ("compat_ioctl: remove all VT ioctl handling"), I got this error message on 64-bit mips kernel with 32-bit busybox userland: ioctl32(init:1): Unknown cmd fd(0) cmd(00005600){t:'V';sz:0} arg(7fd76480) on /dev/console The cmd 5600 is VT_OPENQRY. The busybox's init issues this ioctl to know vt-console or serial-console. If the console was serial console, VT ioctls are not handled by the serial driver. And by quick search, I found some programs using VT_GETMODE to check vt-console is available or not. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 18 Jan, 2010 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] iTCO_wdt: Add Intel Cougar Point and PCH DeviceIDs
-
Suresh Siddha authored
We can use logical flat mode if there are <= 8 logical cpu's (irrespective of physical apic id values). This will enable simplified and efficient IPI and device interrupt routing on such platforms. This has been tested to work on both Intel and AMD platforms. Exceptions like IBM summit platform which can't use logical flat mode are addressed by using OEM platform checks. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Chris McDermott <lcm@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Suresh Siddha authored
Chris McDermott from IBM confirmed that hurricane chipset in IBM summit platforms doesn't support logical flat mode. Irrespective of the other things like apic_id's, total number of logical cpu's, Linux kernel should default to physical mode for this system. The 32-bit kernel does so using the OEM checks for the IBM summit platform. Add a similar OEM platform check for the 64bit kernel too. Otherwise the linux kernel boot can hang on this platform under certain bios/platform settings. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Chris McDermott <lcm@linux.vnet.ibm.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Remove warning message for invalid OSS minor ranges ALSA: hda - Fix capture on Sony VAIO with single input ALSA: hda - Fix mute led GPIO on HP dv-series notebooks ALSA: use subsys_initcall for sound core instead of module_init ALSA: hda - Fix missing capture mixer for ALC861/660 codecs ALSA: hda - Improved MacBook (Pro) 5,1 / 5,2 support ALSA: hda - Fix Toshiba NB20x quirk entry
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: pci_controller->arch_data really is a struct device_node * microblaze: Add missing double apostrophe in Kconfig microblaze: Add PT_ macros for special purpose regs microblaze: Enable accept4 syscall microblaze: Wire up recvmmsg syscall
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Unlock mc13783 before subsystems initialisation, at probe time. mfd: WM835x GPIO direction register is not locked mfd: tmio_mmc hardware abstraction for CNF area mfd: WM8350 off by one bug mfd: Correct WM835x ISINK ramp time defines
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Move cpu hotplug driver lock from pseries to powerpc powerpc: Move /proc/ppc64 to /proc/powerpc update powerpc/8xx: Fix user space TLB walk in dcbX fixup powerpc: Fix decrementer setup on 1GHz boards powerpc/iseries: Initialise on-stack completion powerpc/hvc: Driver build breaks with !HVC_CONSOLE serial/pmac_zilog: Workaround problem due to interrupt on closed port powerpc/macintosh: Make Open Firmware device id constant powerpc: Use helpers for rlimits powerpc: cpumask_of_node() should handle -1 as a node powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREE powerpc/pseries: Fix xics interrupt affinity powerpc/swsusp_32: Fix TLB invalidation powerpc/8xx: Always pin kernel instruction TLB powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx powerpc: Use scripts/mkuboot.sh instead of 'mkimage' powerpc/5200: update defconfigs
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: xfs_swap_extents needs to handle dynamic fork offsets xfs: fix missing error check in xfs_rtfree_range xfs: fix stale inode flush avoidance xfs: Remove inode iolock held check during allocation xfs: reclaim all inodes by background tree walks xfs: Avoid inodes in reclaim when flushing from inode cache xfs: reclaim inodes under a write lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'mantis' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (117 commits) V4L/DVB (13851): Fix Input dependency for Mantis V4L/DVB(13824a): mantis: Fix __devexit bad annotations V4L/DVB (13808b): mantis: replace DMA_nnBIT_MASK to DMA_BIT_MASK(32) V4L/DVB (13808): [Mantis/Hopper] Build update for Mantis/Hopper based cards V4L/DVB(13808a): mantis: convert it to the new ir-core register/unregister functions V4L/DVB (13812): [Mantis/Hopper] Update Copyright header V4L/DVB (13811): [MB86A16] Update Copyright header V4L/DVB (13810): [MB86A16] Use DVB_* macros V4L/DVB (13809): Fix Checkpatch violations V4L/DVB (13807): Fix: Free device in the device registration failure case V4L/DVB (13806): Register and Initialize Remote control V4L/DVB (13805): Fix: Unregister the frontend before detaching V4L/DVB (13804): Remove unused I2C Adapter ID V4L/DVB (13803): Remove unused dependency on CU1216 V4L/DVB (13802): [Mantis/Hopper] Fix all build related warnings V4L/DVB (13801): [MB86A16] Use the search callback V4L/DVB (13800): [Mantis] I2C optimization. Required delay is much lesser than 1mS. V4L/DVB (13799): [Mantis] Unregister frontend V4L/DVB (13798): [Mantis] Enable power for all cards, use byte mode only on relevant devices V4L/DVB (13797): [Mantis/Hopper/TDA665x] Large overhaul, ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (23 commits) V4L/DVB (13966): DVB-T regression fix for saa7134 cards V4L/DVB (13955): cx25821: fix double unlock in medusa_video_init() MAINTAINERS: ivtv-devel is moderated MAINTAINERS: Andy Walls is the new ivtv maintainer V4L/DVB (13941): rj54n1cb0c: remove compiler warning V4L/DVB sh_mobile_ceu: don't check platform_get_irq's return value against zero V4L/DVB mx1_camera: don't check platform_get_irq's return value against zero V4L/DVB (13934): tda8290: Fix FM radio easy programming standard selection for TDA8295 V4L/DVB (13900): gspca - sunplus: Fix bridge exchanges. V4L/DVB (13887): tda8290: add autodetection support for TDA8295c2 V4L/DVB (13882): gspca - stv06xx-vv6410: Ensure register STV_SCAN_RATE is zero V4L/DVB (13880): gspca - m5602-s5k4aa: Add vflip quirk for the Amilo Xi 2428 V4L/DVB (13875): gspca - vc032x: Fix a possible crash with the vc0321 bridge. V4L/DVB (13868): gspca - sn9c20x: Fix test of unsigned. V4L/DVB (13858): ir-keytable: use the right header feature-removal-schedule: Add v4l1 drivers obsoleted by gspca sub drivers V4L/DVB (13622): gspca - ov534: Fix a compilation warning. V4L/DVB (13834): dib8000: fix compilation if !DVB_DIB8000 V4L/DVB (13831): uvcvideo: Fix oops caused by a race condition in buffer dequeuing V4L/DVB (13829): uvcvideo: Fix alternate setting selection in isochronous mode ...
-
Seth Heasley authored
This patch adds the Intel Cougar Point and PCH DeviceIDs for iTCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Michal Simek authored
we are follow powerpc change: 44ef3390Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
PT_ macros are used by gdb and strace uses them too. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
We had wrong name in unistd.h + I wire up this syscall in syscall table. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Patch a2e27255 should contain change in unistd.h too. The same problem had MIPS. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Takashi Iwai authored
-
Takashi Iwai authored
When a card instance with a higher card number is registered, warning messages are spewed eventually with stack traces due to the invalid minor number for OSS device registration. For example, thinkpad-acpi registers the card number 29 as default, and you'll see always these messages. This is rather confusing (and worries users), thus better to return simply the error code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Alberto Panizzo authored
With this, mc13783 subsystems drivers can configure the mc13783 chip reading and writing registers. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Mark Brown authored
No need to set the security key when writing to it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Ian Molton authored
This patch abstracts out the CNF area code from tmio_mmc which is not present in all hardware that can use this driver. This is required so that we can support non-toshiba based hardware. ASIC3 support by Philipp Zabel Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Dan Carpenter authored
If irq == WM8350_NUM_IRQ that would put us past the end of the array. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Mark Brown authored
The constants used to specify ISINK ramp times for WM835x had the wrong shifts so that the on times applied to the off ramp and vice versa. The masks for the bitfields are correct. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
- 17 Jan, 2010 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: do_add_mount() should sanitize mnt_flags CIFS shouldn't make mountpoints shrinkable mnt_flags fixes in do_remount() attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared() may_umount() needs namespace_sem Fix configfs leak Fix the -ESTALE handling in do_filp_open() ecryptfs: Fix refcnt leak on ecryptfs_follow_link() error path Fix ACC_MODE() for real Unrot uml mconsole a bit hppfs: handle ->put_link() Kill 9p readlink() fix autofs/afs/etc. magic mountpoint breakage
-
Mike Frysinger authored
The sym_is() compares a symbol in an attempt to automatically skip symbol prefixes. It does this first by searching the real symbol with the normal unprefixed symbol. But then it uses the length of the original symbol to check the end of the substring instead of the length of the symbol it is looking for. On non-prefixed arches, this is effectively the same thing, so there is no problem. On prefixed-arches, since this is exceeds by just one byte, a crash is rare and it is usually a NUL byte anyways. But every once in a blue moon, you get the right page alignment and it segfaults. For example, on the Blackfin arch, sym_is() will be called with the real symbol "___mod_usb_device_table" as "symbol" when looking for the normal symbol "__mod_usb_device_table" as "name". The substring will thus return one byte into "symbol" and store it into "match". But then "match" will be indexed with the length of "symbol" instead of "name" and so we will exceed the storage. i.e. the code ends up doing: char foo[] = "abc"; return foo[strlen(foo)+1] == '\0'; Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Manu Abraham authored
> > > > CONFIG_INPUT=n As reported by Randy Dunlap <randy.dunlap@oracle.com>: > ERROR: "ir_input_register" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "ir_input_init" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "input_free_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "input_allocate_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined! Signed-off-by: Manu Abraham <manu@linuxtv.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x13d7): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x1433): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x185e): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x18ba): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x68b8): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6914): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d3f): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d9b): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14634): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14690): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14abb): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14b17): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
drivers/media/dvb/mantis/mantis_pci.c: In function ‘mantis_pci_init’: drivers/media/dvb/mantis/mantis_pci.c:76: warning: ‘DMA_nnBIT_MASK’ is deprecated Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Fix a merge conflict between mantis and IR cleanups Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-