- 16 Mar, 2020 40 commits
-
-
Sean Christopherson authored
Now that the emulation context is dynamically allocated and not embedded in struct kvm_vcpu, move its header, kvm_emulate.h, out of the public asm directory and into KVM's private x86 directory. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Allocate the emulation context instead of embedding it in struct kvm_vcpu_arch. Dynamic allocation provides several benefits: - Shrinks the size x86 vcpus by ~2.5k bytes, dropping them back below the PAGE_ALLOC_COSTLY_ORDER threshold. - Allows for dropping the include of kvm_emulate.h from asm/kvm_host.h and moving kvm_emulate.h into KVM's private directory. - Allows a reducing KVM's attack surface by shrinking the amount of vCPU data that is exposed to usercopy. - Allows a future patch to disable the emulator entirely, which may or may not be a realistic endeavor. Mark the entire struct as valid for usercopy to maintain existing behavior with respect to hardened usercopy. Future patches can shrink the usercopy range to cover only what is necessary. Signed-off-by: -
Sean Christopherson authored
Move ctxt_virt_addr_bits() and emul_is_noncanonical_address() from x86.h to emulate.c. This eliminates all references to struct x86_emulate_ctxt from x86.h, and sets the stage for a future patch to stop including kvm_emulate.h in asm/kvm_host.h. Signed-off-by:
-
Sean Christopherson authored
Explicitly pass an exception struct when checking for intercept from the emulator, which eliminates the last reference to arch.emulate_ctxt in vendor specific code. Signed-off-by:
-
Sean Christopherson authored
Add variants of the I/O helpers that take a vCPU instead of an emulation context. This will eventually allow KVM to limit use of the emulation context to the full emulation path. Signed-off-by:
-
Peter Xu authored
It's never used anywhere now. Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Explicitly cast the integer literal to an unsigned long when stuffing a non-canonical value into the host virtual address during private memslot deletion. The explicit cast fixes a warning that gets promoted to an error when running with KVM's newfangled -Werror setting. arch/x86/kvm/x86.c:9739:9: error: large integer implicitly truncated to unsigned type [-Werror=overflow] Fixes: a3e967c0b87d3 ("KVM: Terminate memslot walks via used_slots" Signed-off-by: -
Sean Christopherson authored
Drop the call to cpu_has_vmx_ept_execute_only() when calculating which EPT capabilities will be exposed to L1 for nested EPT. The resulting configuration is immediately sanitized by the passed in @ept_caps, and except for the call from vmx_check_processor_compat(), @ept_caps is the capabilities that are queried by cpu_has_vmx_ept_execute_only(). For vmx_check_processor_compat(), KVM *wants* to ignore vmx_capability.ept so that a divergence in EPT capabilities between CPUs is detected. Signed-off-by:
-
Sean Christopherson authored
Rename kvm_mmu->get_cr3() to call out that it is retrieving a guest value, as opposed to kvm_mmu->set_cr3(), which sets a host value, and to note that it will return something other than CR3 when nested EPT is in use. Hopefully the new name will also make it more obvious that L1's nested_cr3 is returned in SVM's nested NPT case. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Rename valid_ept_address() to nested_vmx_check_eptp() to follow the nVMX nomenclature and to reflect that the function now checks a lot more than just the address contained in the EPTP. Rename address to new_eptp in associated code. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Rename the accessor for vmcs12.EPTP to use "eptp" instead of "cr3". The accessor has no relation to cr3 whatsoever, other than it being assigned to the also poorly named kvm_mmu->get_cr3() hook. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add support for 5-level nested EPT, and advertise said support in the EPT capabilities MSR. KVM's MMU can already handle 5-level legacy page tables, there's no reason to force an L1 VMM to use shadow paging if it wants to employ 5-level page tables. Signed-off-by:
-
Sean Christopherson authored
Drop kvm_mmu_extended_role.cr4_la57 now that mmu_role doesn't mask off level, which already incorporates the guest's CR4.LA57 for a shadow MMU by querying is_la57_mode(). Signed-off-by:
-
Sean Christopherson authored
Use the calculated role as-is when propagating it to kvm_mmu.mmu_role, i.e. stop masking off meaningful fields. The concept of masking off fields came from kvm_mmu_pte_write(), which (correctly) ignores certain fields when comparing kvm_mmu_page.role against kvm_mmu.mmu_role, e.g. the current mmu's access and level have no relation to a shadow page's access and level. Masking off the level causes problems for 5-level paging, e.g. CR4.LA57 has its own redundant flag in the extended role, and nested EPT would need a similar hack to support 5-level paging for L2. Opportunistically rework the mask for kvm_mmu_pte_write() to define the fields that should be ignored as opposed to the fields that should be checked, i.e. make it opt-out instead of opt-in so that new fields are automatically picked up. While doing so, stop ignoring "direct". The field is effectively ignored anyways because kvm_mmu_pte_write() is only reached with an indirect mmu and the loop only walks indirect shadow pages, but double checking "direct" literally costs nothing. Signed-off-by:
-
Jay Zhou authored
Since the new capability KVM_DIRTY_LOG_INITIALLY_SET of KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 has been introduced, tweak the clear_dirty_log_test to use it. Signed-off-by:
Jay Zhou <jianjay.zhou@huawei.com> Signed-off-by:
-
Sean Christopherson authored
Return true for vmx_interrupt_allowed() if the vCPU is in L2 and L1 has external interrupt exiting enabled. IRQs are never blocked in hardware if the CPU is in the guest (L2 from L1's perspective) when IRQs trigger VM-Exit. The new check percolates up to kvm_vcpu_ready_for_interrupt_injection() and thus vcpu_run(), and so KVM will exit to userspace if userspace has requested an interrupt window (to inject an IRQ into L1). Remove the @external_intr param from vmx_check_nested_events(), which is actually an indicator that userspace wants an interrupt window, e.g. it's named @req_int_win further up the stack. Injecting a VM-Exit into L1 to try and bounce out to L0 userspace is all kinds of broken and is no longer necessary. Remove the hack in nested_vmx_vmexit() that attempted to workaround the breakage in vmx_check_nested_events() by only filling interrupt info if there's an actual interrupt pending. The hack actually made things worse because it caused KVM to _never_ fill interrupt info when the LAPIC resides in userspace (kvm_cpu_has_interrupt() queries interrupt.injected, which is always cleared by prepare_vmcs12() before reaching the hack in nested_vmx_vmexit()). Fixes: 6550c4df ("KVM: nVMX: Fix interrupt window request with "Acknowledge interrupt on exit"") Cc: stable@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Wanpeng Li authored
In the progress of vCPUs creation, it queues a kvmclock sync worker to the global workqueue before each vCPU creation completes. The workqueue subsystem guarantees not to queue the already queued work; however, we can make the logic more clear by making just one leader to trigger this kvmclock sync request, and also save on cacheline bouncing caused by test_and_set_bit. Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Reviewed-by:
-
Wanpeng Li authored
In the vCPU reset and set APIC_BASE MSR path, the apic map will be recalculated several times, each time it will consume 10+ us observed by ftrace in my non-overcommit environment since the expensive memory allocate/mutex/rcu etc operations. This patch optimizes it by recaluating apic map in batch, I hope this can benefit the serverless scenario which can frequently create/destroy VMs. Before patch: kvm_lapic_reset ~27us After patch: kvm_lapic_reset ~14us Observed by ftrace, improve ~48%. Signed-off-by:
-
Miaohe Lin authored
Remove some obsolete comments, fix wrong function name and description. Reviewed-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Jay Zhou authored
It could take kvm->mmu_lock for an extended period of time when enabling dirty log for the first time. The main cost is to clear all the D-bits of last level SPTEs. This situation can benefit from manual dirty log protect as well, which can reduce the mmu_lock time taken. The sequence is like this: 1. Initialize all the bits of the dirty bitmap to 1 when enabling dirty log for the first time 2. Only write protect the huge pages 3. KVM_GET_DIRTY_LOG returns the dirty bitmap info 4. KVM_CLEAR_DIRTY_LOG will clear D-bit for each of the leaf level SPTEs gradually in small chunks Under the Intel(R) Xeon(R) Gold 6152 CPU @ 2.10GHz environment, I did some tests with a 128G windows VM and counted the time taken of memory_global_dirty_log_start, here is the numbers: VM Size Before After optimization 128G 460ms 10ms Signed-off-by:
-
Sean Christopherson authored
Reuse the current root when possible instead of grabbing a different root from the array of cached roots. Doing so avoids unnecessary MMU switches and also fixes a quirk where KVM can't reuse roots without creating multiple roots since the cache is a victim cache, i.e. roots are added to the cache when they're "evicted", not when they are created. The quirk could be fixed by adding roots to the cache on creation, but that would reduce the effective size of the cache as one of its entries would be burned to track the current root. Reusing the current root is especially helpful for nested virt as the current root is almost always usable for the "new" MMU on nested VM-entry/VM-exit. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Ignore the guest's CR3 when looking for a cached root for a direct MMU, the guest's CR3 has no impact on the direct MMU's shadow pages (the role check ensures compatibility with CR0.WP, etc...). Zero out root_cr3 when allocating the direct roots to make it clear that it's ignored. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Oliver Upton authored
The AVIC does not support guest use of the x2APIC interface. Currently, KVM simply chooses to squash the x2APIC feature in the guest's CPUID If the AVIC is enabled. Doing so prevents KVM from running a guest with greater than 255 vCPUs, as such a guest necessitates the use of the x2APIC interface. Instead, inhibit AVIC enablement on a per-VM basis whenever the x2APIC feature is set in the guest's CPUID. Signed-off-by:
Oliver Upton <oupton@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Peter Xu authored
Remove includes of asm/kvm_host.h from files that already include linux/kvm_host.h to make it more obvious that there is no ordering issue between the two headers. linux/kvm_host.h includes asm/kvm_host.h to pick up architecture specific settings, and this will never change, i.e. including asm/kvm_host.h after linux/kvm_host.h may seem problematic, but in practice is simply redundant. Signed-off-by:
-
Andrew Jones authored
The TEST_ASSERT in x86_64/platform_info_test.c would have print 'ucall' instead of 'uc.cmd'. Also fix all uc.cmd format types. Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Move the VM allocation and free code to common x86 as the logic is more or less identical across SVM and VMX. Note, although hyperv.hv_pa_pg is part of the common kvm->arch, it's (currently) only allocated by VMX VMs. But, since kfree() plays nice when passed a NULL pointer, the superfluous call for SVM is harmless and avoids future churn if SVM gains support for HyperV's direct TLB flush. Signed-off-by:
-
Sean Christopherson authored
Directly return the __vmalloc() result in {svm,vmx}_vm_alloc() to pave the way for handling VM alloc/free in common x86 code, and to obviate the need to check the result of __vmalloc() in vendor specific code. Add a build-time assertion to ensure each structs' "kvm" field stays at offset 0, which allows interpreting a "struct kvm_{svm,vmx}" as a "struct kvm". Signed-off-by: -
Sean Christopherson authored
Check the result of __vmalloc() to avoid dereferencing a NULL pointer in the event that allocation failres. Fixes: d1e5b0e9 ("kvm: Make VM ioctl do valloc for some archs") Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Hankland authored
The sample_period of a counter tracks when that counter will overflow and set global status/trigger a PMI. However this currently only gets set when the initial counter is created or when a counter is resumed; this updates the sample period after a wrmsr so running counters will accurately reflect their new value. Signed-off-by:
Eric Hankland <ehankland@google.com> Signed-off-by:
-
Sean Christopherson authored
Replace open coded instances of kvm_arch_flush_remote_tlbs_memslot()'s functionality with calls to the aforementioned function. Update the comment in kvm_arch_flush_remote_tlbs_memslot() to elaborate on how it is used and why it asserts that slots_lock is held. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use the with_address() variant when performing a TLB flush for a specific memslot via kvm_arch_flush_remote_tlbs_memslot(), i.e. when flushing after clearing dirty bits during KVM_{GET,CLEAR}_DIRTY_LOG. This aligns all dirty log memslot-specific TLB flushes to use the with_address() variant and paves the way for consolidating the relevant code. Note, moving to the with_address() variant only affects functionality when running as a HyperV guest. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: -
Sean Christopherson authored
Move kvm_arch_flush_remote_tlbs_memslot() from x86.c to mmu.c in preparation for calling kvm_flush_remote_tlbs_with_address() instead of kvm_flush_remote_tlbs(). The with_address() variant is statically defined in mmu.c, arguably kvm_arch_flush_remote_tlbs_memslot() belongs in mmu.c anyways, and defining kvm_arch_flush_remote_tlbs_memslot() in mmu.c will allow the compiler to inline said function when a future patch consolidates open coded variants of the function. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add a KVM selftest to test moving the base gfn of a userspace memory region. Although the basic concept of moving memory regions is not x86 specific, the assumptions regarding large pages and MMIO shenanigans used to verify the correctness make this x86_64 only for the time being. Reviewed-by:
-
Sean Christopherson authored
Now that the memslot logic doesn't assume memslots are always non-NULL, dynamically size the array of memslots instead of unconditionally allocating memory for the maximum number of memslots. Note, because a to-be-deleted memslot must first be invalidated, the array size cannot be immediately reduced when deleting a memslot. However, consecutive deletions will realize the memory savings, i.e. a second deletion will trim the entry. Tested-by:
Christoffer Dall <christoffer.dall@arm.com> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
-
Sean Christopherson authored
Refactor memslot handling to treat the number of used slots as the de facto size of the memslot array, e.g. return NULL from id_to_memslot() when an invalid index is provided instead of relying on npages==0 to detect an invalid memslot. Rework the sorting and walking of memslots in advance of dynamically sizing memslots to aid bisection and debug, e.g. with luck, a bug in the refactoring will bisect here and/or hit a WARN instead of randomly corrupting memory. Alternatively, a global null/invalid memslot could be returned, i.e. so callers of id_to_memslot() don't have to explicitly check for a NULL memslot, but that approach runs the risk of introducing difficult-to- debug issues, e.g. if the global null slot is modified. Constifying the return from id_to_memslot() to combat such issues is possible, but would require a massive refactoring of arch specific code and would still be susceptible to casting shenanigans. Add function comments to update_memslots() and search_memslots() to explicitly (and loudly) state how memslots are sorted. Opportunistically stuff @hva with a non-canonical value when deleting a private memslot on x86 to detect bogus usage of the freed slot. No functional change intended. Tested-by:
-
Sean Christopherson authored
Rework kvm_get_dirty_log() so that it "returns" the associated memslot on success. A future patch will rework memslot handling such that id_to_memslot() can return NULL, returning the memslot makes it more obvious that the validity of the memslot has been verified, i.e. precludes the need to add validity checks in the arch code that are technically unnecessary. To maintain ordering in s390, move the call to kvm_arch_sync_dirty_log() from s390's kvm_vm_ioctl_get_dirty_log() to the new kvm_get_dirty_log(). This is a nop for PPC, the only other arch that doesn't select KVM_GENERIC_DIRTYLOG_READ_PROTECT, as its sync_dirty_log() is empty. Ideally, moving the sync_dirty_log() call would be done in a separate patch, but it can't be done in a follow-on patch because that would temporarily break s390's ordering. Making the move in a preparatory patch would be functionally correct, but would create an odd scenario where the moved sync_dirty_log() would operate on a "different" memslot due to consuming the result of a different id_to_memslot(). The memslot couldn't actually be different as slots_lock is held, but the code is confusing enough as it is, i.e. moving sync_dirty_log() in this patch is the lesser of all evils. Signed-off-by:
-
Sean Christopherson authored
Move the implementations of KVM_GET_DIRTY_LOG and KVM_CLEAR_DIRTY_LOG for CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT into common KVM code. The arch specific implemenations are extremely similar, differing only in whether the dirty log needs to be sync'd from hardware (x86) and how the TLBs are flushed. Add new arch hooks to handle sync and TLB flush; the sync will also be used for non-generic dirty log support in a future patch (s390). The ulterior motive for providing a common implementation is to eliminate the dependency between arch and common code with respect to the memslot referenced by the dirty log, i.e. to make it obvious in the code that the validity of the memslot is guaranteed, as a future patch will rework memslot handling such that id_to_memslot() can return NULL. Signed-off-by:
-
Sean Christopherson authored
Clean up __kvm_set_memory_region() to achieve several goals: - Remove local variables that serve no real purpose - Improve the readability of the code - Better show the relationship between the 'old' and 'new' memslot - Prepare for dynamically sizing memslots - Document subtle gotchas (via comments) Note, using 'tmp' to hold the initial memslot is not strictly necessary at this juncture, e.g. 'old' could be directly copied from id_to_memslot(), but keep the pointer usage as id_to_memslot() will be able to return a NULL pointer once memslots are dynamically sized. Signed-off-by:
-
Sean Christopherson authored
Now that all callers of kvm_free_memslot() pass NULL for @dont, remove the param from the top-level routine and all arch's implementations. No functional change intended. Tested-by:
-
Sean Christopherson authored
Move memslot deletion into its own routine so that the success path for other memslot updates does not need to use kvm_free_memslot(), i.e. can explicitly destroy the dirty bitmap when necessary. This paves the way for dropping @dont from kvm_free_memslot(), i.e. all callers now pass NULL for @dont. Add a comment above the code to make a copy of the existing memslot prior to deletion, it is not at all obvious that the pointer will become stale during sorting and/or installation of new memslots. Note, kvm_arch_commit_memory_region() allows an architecture to free resources when moving a memslot or changing its flags, e.g. x86 frees its arch specific memslot metadata during commit_memory_region(). Acked-by:
-
