1. 10 Aug, 2010 40 commits
    • Linus Torvalds's avatar
      Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block · 2f9e825d
      Linus Torvalds authored
      * 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
        block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
        xen-blkfront: fix missing out label
        blkdev: fix blkdev_issue_zeroout return value
        block: update request stacking methods to support discards
        block: fix missing export of blk_types.h
        writeback: fix bad _bh spinlock nesting
        drbd: revert "delay probes", feature is being re-implemented differently
        drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
        drbd: Disable delay probes for the upcomming release
        writeback: cleanup bdi_register
        writeback: add new tracepoints
        writeback: remove unnecessary init_timer call
        writeback: optimize periodic bdi thread wakeups
        writeback: prevent unnecessary bdi threads wakeups
        writeback: move bdi threads exiting logic to the forker thread
        writeback: restructure bdi forker loop a little
        writeback: move last_active to bdi
        writeback: do not remove bdi from bdi_list
        writeback: simplify bdi code a little
        writeback: do not lose wake-ups in bdi threads
        ...
      
      Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
      drivers/scsi/scsi_error.c as per Jens.
      2f9e825d
    • Linus Torvalds's avatar
      Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 · 7ae0dea9
      Linus Torvalds authored
      * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (94 commits)
        V4L/DVB: tvp7002: fix write to H-PLL Feedback Divider LSB register
        V4L/DVB: dvb: siano: free spinlock before schedule()
        V4L/DVB: media: video: pvrusb2: remove custom hex_to_bin()
        V4L/DVB: drivers: usbvideo: remove custom implementation of hex_to_bin()
        V4L/DVB: Report supported QAM modes on bt8xx
        V4L/DVB: media: ir-keytable: null dereference in debug code
        V4L/DVB: ivtv: convert to the new control framework
        V4L/DVB: ivtv: convert gpio subdev to new control framework
        V4L/DVB: wm8739: convert to the new control framework
        V4L/DVB: cs53l32a: convert to new control framework
        V4L/DVB: wm8775: convert to the new control framework
        V4L/DVB: cx2341x: convert to the control framework
        V4L/DVB: cx25840: convert to the new control framework
        V4L/DVB: cx25840/ivtv: replace ugly priv control with s_config
        V4L/DVB: saa717x: convert to the new control framework
        V4L/DVB: msp3400: convert to the new control framework
        V4L/DVB: saa7115: convert to the new control framework
        V4L/DVB: v4l2: hook up the new control framework into the core framework
        V4L/DVB: Documentation: add v4l2-controls.txt documenting the new controls API
        V4L/DVB: v4l2-ctrls: Whitespace cleanups
        ...
      7ae0dea9
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog · 6c74700f
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
        watchdog: hpwdt: formatting of pointers in printk()
        watchdog: Adding support for ARM Primecell SP805 Watchdog
        watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG
        watchdog: sch311x_wdt.c: set parent before registeriing the misc device in probe() function
        watchdog: wdt_pci.c: move ids to pci_ids.h
        watchdog: s3c2410_wdt - Fix removing of platform device
      6c74700f
    • Linus Torvalds's avatar
      3e756163
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 04f2b976
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
        Input: xpad - add USB-ID for PL-3601 Xbox 360 pad
        Input: cy8ctmg100_ts - signedness bug
        Input: elantech - report position also with 3 fingers
        Input: elantech - discard the first 2 positions on some firmwares
        Input: adxl34x - do not mark device as disabled on startup
        Input: gpio_keys - add hooks to enable/disable device
        Input: evdev - rearrange ioctl handling
        Input: dynamically allocate ABS information
        Input: switch to input_abs_*() access functions
        Input: add static inline accessors for ABS properties
      04f2b976
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 · 9895850b
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (148 commits)
        USB: serial: fix stalled writes
        USB: remove fake "address-of" expressions
        USB: fix thread-unsafe anchor utiliy routines
        USB: usbtest: support test device with only one iso-in or iso-out endpoint
        USB: usbtest: avoid to free coherent buffer in atomic context
        USB: xhci: Set DMA mask for host.
        USB: xhci: Don't flush doorbell writes.
        USB: xhci: Reduce reads and writes of interrupter registers.
        USB: xhci: Make xhci_set_hc_event_deq() static.
        USB: xhci: Minimize HW event ring dequeue pointer writes.
        USB: xhci: Make xhci_handle_event() static.
        USB: xhci: Remove unnecessary reads of IRQ_PENDING register.
        USB: xhci: Performance - move xhci_work() into xhci_irq()
        USB: xhci: Performance - move interrupt handlers into xhci-ring.c
        USB: xhci: Performance - move functions that find ep ring.
        USB:: fix linux/usb.h kernel-doc warnings
        USB: add USB serial ssu100 driver
        USB: usb-storage: implement autosuspend
        USB: ehci: fix remove of ehci debugfs dir
        USB: Add USB 2.0 to ssb ohci driver
        ...
      9895850b
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 · fc385c31
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (68 commits)
        U6715 16550A serial driver support
        Char: nozomi, set tty->driver_data appropriately
        Char: nozomi, fix tty->count counting
        serial: max3107: Fix gpiolib support
        hsu: call PCI pm hooks in suspend/resume function
        hsu: some code cleanup
        hsu: add a periodic timer to check dma rx channel
        hsu: driver for Medfield High Speed UART device
        mxser: remove unnesesary NULL check
        serial: add support for OX16PCI958 card
        serial: 68328serial.c: remove dead (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS)
        timbuart: use __devinit and __devexit macros for probe and remove
        serial: MMIO32 support for 8250_early.c
        serial: mcf: don't take spinlocks in already protected functions
        serial: general fixes in the serial_rs485 structure
        serial: fix missing bit coverage of ASYNC_FLAGS
        serial: "altera_uart: simplify altera_uart_console_putc()" checkpatch fixes
        serial: crisv10: formatting of pointers in printk()
        vt: Fix warning: statement with no effect due to vt_kern.h
        tty_io: remove casts from void*
        ...
      fc385c31
    • Johan Hovold's avatar
      USB: serial: fix stalled writes · b58af406
      Johan Hovold authored
      As David VomLehn points out, it was possible to receive an interrupt
      before clearing the free-urb flag which could lead to the urb being
      incorrectly marked as busy.
      
      For the same reason, move tx_bytes accounting so that it will never be
      negative.
      
      Note that the free-flags set and clear operations do not need any
      additional locking as they are manipulated while USB_SERIAL_WRITE_BUSY
      is set.
      Reported-by: default avatarDavid VomLehn <dvomlehn@cisco.com>
      Tested-by: default avatarDavid VomLehn <dvomlehn@cisco.com>
      Signed-off-by: default avatarJohan Hovold <jhovold@gmail.com>
      Cc: stable <stable@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      b58af406
    • Alan Stern's avatar
      USB: remove fake "address-of" expressions · b409214c
      Alan Stern authored
      Fake "address-of" expressions that evaluate to NULL generally confuse
      readers and can provoke compiler warnings.  This patch (as1412)
      removes three such fake expressions, using "#ifdef"s in their place.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      b409214c
    • Christian Lamparter's avatar
      USB: fix thread-unsafe anchor utiliy routines · b3e67044
      Christian Lamparter authored
      This patch fixes a race condition in two utility routines
      related to the removal/unlinking of urbs from an anchor.
      
      If two threads are concurrently accessing the same anchor,
      both could end up with the same urb - thinking they are
      the exclusive owner.
      
      Alan Stern pointed out a related issue in
      usb_unlink_anchored_urbs:
      
      "The URB isn't removed from the anchor until it completes
       (as a by-product of completion, in fact), which might not
       be for quite some time after the unlink call returns.
       In the meantime, the subroutine will keep trying to unlink
       it, over and over again."
      
      Cc: stable <stable@kernel.org>
      Cc: Oliver Neukum <oneukum@suse.de>
      Cc: Greg Kroah-Hartman <greg@kroah.com>
      Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarChristian Lamparter <chunkeey@googlemail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
      b3e67044
    • Ming Lei's avatar
      USB: usbtest: support test device with only one iso-in or iso-out endpoint · 951fd8ee
      Ming Lei authored
      It is very common that one altsetting may include only one iso-in or iso-out
      single endpoint, especially for high bandwidth endpoint, so support it.
      Signed-off-by: default avatarMing Lei <tom.leiming@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      951fd8ee
    • Ming Lei's avatar
      USB: usbtest: avoid to free coherent buffer in atomic context · e10e1bec
      Ming Lei authored
      This patch fixes the warning below:
      [30753.755998] ------------[ cut here ]------------
      [30753.755998] WARNING: at /home/tom/git/linux-2.6/linux-2.6-next/arch/x86/include/asm/dma-mapping.h:155 hcd_buffer_free+0xb1/0xd4 [usbcore]()
      [30753.755998] Hardware name: 6475EK2
      [30753.755998] Modules linked in: uvcvideo ehci_hcd usbtest cdc_ether usbnet vfat fat usb_storage nfsd lockd nfs_acl auth_rpcgss exportfs mii tun videodev v4l1_compat v4l2_compat_ioctl32 fuse bridge stp llc sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf kvm_intel kvm arc4 ecb ath5k usbhid mac80211 snd_hda_codec_conexant ch341 usbserial ath cfg80211 thinkpad_acpi snd_hda_intel pcspkr wmi hwmon yenta_socket iTCO_wdt iTCO_vendor_support i2c_i801 e1000e snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc pata_acpi uhci_hcd ohci_hcd usbcore i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: uvcvideo]
      [30753.755998] Pid: 0, comm: swapper Tainted: G        W   2.6.35-rc6-gkh-wl+ #49
      [30753.755998] Call Trace:
      [30753.755998]  <IRQ>  [<ffffffff8104478a>] warn_slowpath_common+0x80/0x98
      [30753.755998]  [<ffffffff810447b7>] warn_slowpath_null+0x15/0x17
      [30753.755998]  [<ffffffffa00ce02d>] hcd_buffer_free+0xb1/0xd4 [usbcore]
      [30753.755998]  [<ffffffffa00c1345>] usb_free_coherent+0x1c/0x1e [usbcore]
      [30753.755998]  [<ffffffffa00b13e4>] simple_free_urb+0x23/0x2f [usbtest]
      [30753.755998]  [<ffffffffa00b210b>] iso_callback+0xbb/0x10f [usbtest]
      [30753.755998]  [<ffffffffa00c7390>] usb_hcd_giveback_urb+0x8c/0xc0 [usbcore]
      [30753.755998]  [<ffffffffa0449b35>] ehci_urb_done+0x84/0x95 [ehci_hcd]
      [30753.755998]  [<ffffffffa044b5a5>] ehci_work+0x41a/0x7dd [ehci_hcd]
      [30753.755998]  [<ffffffffa044e298>] ehci_irq+0x33b/0x370 [ehci_hcd]
      [30753.755998]  [<ffffffff8100fb05>] ? sched_clock+0x9/0xd
      [30753.755998]  [<ffffffff8105e641>] ? sched_clock_local+0x1c/0x82
      [30753.755998]  [<ffffffff8105e76a>] ? sched_clock_cpu+0xc3/0xce
      [30753.755998]  [<ffffffff81067c7e>] ? trace_hardirqs_off+0xd/0xf
      [30753.755998]  [<ffffffff8105e7b8>] ? cpu_clock+0x43/0x5e
      [30753.755998]  [<ffffffffa00c6999>] usb_hcd_irq+0x45/0xa1 [usbcore]
      [30753.755998]  [<ffffffff81092e02>] handle_IRQ_event+0x20/0xa5
      [30753.755998]  [<ffffffff81094cea>] handle_fasteoi_irq+0x92/0xd2
      [30753.755998]  [<ffffffff8100c0ed>] handle_irq+0x1f/0x2a
      [30753.755998]  [<ffffffff8100b75d>] do_IRQ+0x57/0xbe
      [30753.755998]  [<ffffffff8136a693>] ret_from_intr+0x0/0x16
      [30753.755998]  <EOI>  [<ffffffff81223baa>] ? acpi_idle_enter_bm+0x231/0x269
      [30753.755998]  [<ffffffff81223ba3>] ? acpi_idle_enter_bm+0x22a/0x269
      [30753.755998]  [<ffffffff812c4b6b>] cpuidle_idle_call+0x99/0xce
      [30753.755998]  [<ffffffff81008dd5>] cpu_idle+0x61/0xaa
      [30753.755998]  [<ffffffff8136374b>] start_secondary+0x1c2/0x1c6
      [30753.755998] ---[ end trace 904cfaf7ab4cb1a2 ]---
      Signed-off-by: default avatarMing Lei <tom.leiming@gmail.com>
      Cc: stable <stable@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      e10e1bec
    • Sarah Sharp's avatar
      USB: xhci: Set DMA mask for host. · 006d5820
      Sarah Sharp authored
      Tell the USB core that we can do DMA directly (instead of needing it to
      memory-map the buffers for PIO).  If the xHCI host supports 64-bit addresses,
      set the DMA mask accordingly.  Otherwise indicate the host can handle 32-bit DMA
      addresses.
      
      This improves performance because the USB core doesn't have to spend time
      remapping buffers in high memory into the 32-bit address range.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      006d5820
    • Sarah Sharp's avatar
      USB: xhci: Don't flush doorbell writes. · ed3f2453
      Sarah Sharp authored
      To tell the host controller that there are transfers on the endpoint
      rings, we need to ring the endpoint doorbell.  This is a PCI MMIO write,
      which can be delayed until another register read is queued.
      
      The previous code would flush the doorbell write by reading the doorbell
      register after the write.  This may take time, and it's not necessary to
      force the host controller to know about the transfers right away.  Don't
      flush the doorbell register writes.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      ed3f2453
    • Sarah Sharp's avatar
      USB: xhci: Reduce reads and writes of interrupter registers. · c21599a3
      Sarah Sharp authored
      The interrupter register set includes a register that says whether interrupts
      are pending for each event ring (the IP bit).  Each MSI-X vector will get its
      own interrupter set with separate IP bits.  The status register includes an
      "Event Interrupt (EINT)" bit that is set when an IP bit is set in any of the
      interrupters.
      
      When PCI interrupts are used, the EINT bit exactly mirrors the IP bit in the
      single interrupter set, and it is a waste of time to check both registers when
      trying to figure out if the xHC interrupted or another device on the shared IRQ
      line interrupted.  Only check the IP bit to reduce register reads.
      
      The IP bit is automatically cleared by the xHC when MSI or MSI-X is enabled.  It
      doesn't make sense to read that register to check for shared interrupts (since
      MSI and MSI-X aren't shared).  It also doesn't make sense to write to that
      register to clear the IP bit, since it is cleared by the hardware.
      
      We can tell whether MSI or MSI-X is enabled by looking at the irq number in
      hcd->irq.  If it's -1, we know MSI or MSI-X is enabled.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c21599a3
    • Sarah Sharp's avatar
      USB: xhci: Make xhci_set_hc_event_deq() static. · 257d585a
      Sarah Sharp authored
      Now that the event handler functions no longer use xhci_set_hc_event_deq()
      to update the event ring dequeue pointer, that function is not used by
      anything in xhci-ring.c.  Move that function into xhci-mem.c and make it
      static.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      257d585a
    • Sarah Sharp's avatar
      USB: xhci: Minimize HW event ring dequeue pointer writes. · c06d68b8
      Sarah Sharp authored
      The xHCI specification suggests that writing the hardware event ring dequeue
      pointer register too often can be an expensive operation for the xHCI hardware
      to manage.  It suggests minimizing the number of writes to that register.
      
      Originally, the driver wrote the event ring dequeue pointer after each
      event was processed.  Depending on how the event ring moderation register
      is set up and how fast the transfers are completing, there may be several
      events processed for each interrupt.  This patch makes the hardware event
      ring dequeue pointer be written only once per interrupt.
      
      Make the transfer event handler and port status event handler only write
      the software event ring dequeue pointer.  Move the updating of the
      hardware event ring dequeue pointer into the interrupt function.  Move the
      contents of xhci_set_hc_event_deq() into the interrupt handler.  The
      interrupt handler must clear the event handler busy flag, so it might as
      well also write the dequeue pointer to the same register.  This eliminates
      two 32-bit PCI reads and two 32-bit PCI writes.
      Reported-by: default avatarAndiry Xu <andiry.xu@amd.com>
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c06d68b8
    • Sarah Sharp's avatar
      USB: xhci: Make xhci_handle_event() static. · d6d98a4d
      Sarah Sharp authored
      xhci_handle_event() is now only called from within xhci-ring.c, so make it
      static.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      d6d98a4d
    • Sarah Sharp's avatar
      USB: xhci: Remove unnecessary reads of IRQ_PENDING register. · 27e0dd4d
      Sarah Sharp authored
      Remove a duplicate register read of the interrupt pending register from
      xhci_irq().  Also, remove waiting on the posted write of that register.
      The host will see it eventually.  It will probably read the register
      itself before deciding whether to interrupt the system again, forcing the
      posted write to complete.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      27e0dd4d
    • Sarah Sharp's avatar
      USB: xhci: Performance - move xhci_work() into xhci_irq() · bda53145
      Sarah Sharp authored
      When we move xhci_work() into xhci_irq(), we don't need to read the operational
      register status field twice.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      bda53145
    • Sarah Sharp's avatar
      USB: xhci: Performance - move interrupt handlers into xhci-ring.c · 9032cd52
      Sarah Sharp authored
      Most of the work for interrupt handling is done in xhci-ring.c, so it makes
      sense to move the functions that are first called when an interrupt happens
      (xhci_irq() or xhci_msi_irq()) into xhci-ring.c, so that the compiler can better
      optimize them.
      
      Shorten some lines to make it pass checkpatch.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      9032cd52
    • Sarah Sharp's avatar
      USB: xhci: Performance - move functions that find ep ring. · 021bff91
      Sarah Sharp authored
      I've been using perf to measure the top symbols while transferring 1GB of data
      on a USB 3.0 drive with dd.  This is using the raw disk with /dev/sdb, with a
      block size of 1K.
      
      During performance testing, the top symbol was xhci_triad_to_transfer_ring(), a
      function that should return immediately if streams are not enabled for an
      endpoint.  It turned out that the functions to find the endpoint ring was
      defined in xhci-mem.c and used in xhci-ring.c and xhci-hcd.c.  I moved a copy of
      xhci_triad_to_transfer_ring() and xhci_urb_to_transfer_ring() into xhci-ring.c
      and declared them static.  I also made a static version of
      xhci_urb_to_transfer_ring() in xhci.c.
      
      This improved throughput on a 1GB read of the raw disk with dd from
      186MB/s to 195MB/s, and perf reported sampling the xhci_triad_to_transfer_ring()
      0.06% of the time, rather than 9.26% of the time.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      021bff91
    • Randy Dunlap's avatar
      USB:: fix linux/usb.h kernel-doc warnings · c6ba1c2a
      Randy Dunlap authored
      Fix kernel-doc warnings in linux/usb.h:
      
      Warning(include/linux/usb.h:185): No description found for parameter 'resetting_device'
      Warning(include/linux/usb.h:1212): No description found for parameter 'stream_id'
      Signed-off-by: default avatarRandy Dunlap <randy.dunlap@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c6ba1c2a
    • Bill Pemberton's avatar
      USB: add USB serial ssu100 driver · 52af9545
      Bill Pemberton authored
      Add support for the Quatech SSU-100 single port usb to serial device.
      This driver is based on the ftdi_sio.c driver and the original
      serqt_usb driver from Quatech.
      Signed-off-by: default avatarBill Pemberton <wfp5p@virginia.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      52af9545
    • Alan Stern's avatar
      USB: usb-storage: implement autosuspend · f283925f
      Alan Stern authored
      This patch (as1400) adds runtime-PM support to usb-storage.  It
      utilizes the SCSI layer's runtime-PM implementation, so its scope is
      limited.  Currently the only effect is that disk-like devices (such as
      card readers or flash drives) will be autosuspended if they aren't
      mounted and their device files aren't open.  This would apply, for
      example, to card readers that don't contain a memory card.
      
      Unfortunately this won't interact very well with the removable-media
      polling normally carried out by hal or DeviceKit.  Maybe those
      programs can be changed to use a longer polling interval, or maybe the
      default autosuspend time for usb-storage should be set to something
      below 1 second.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Cc: James Bottomley <James.Bottomley@suse.de>
      Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      f283925f
    • Ming Lei's avatar
      USB: ehci: fix remove of ehci debugfs dir · 185c9bcf
      Ming Lei authored
      The patch below on gregkh tree only creates 'lpm' file under
      ehci->debug_dir, but not removes it when unloading module,
      
      	 USB: EHCI: EHCI 1.1 addendum: preparation
      
      which can make loading of ehci-hcd module failed after unloading it.
      
      This patch replaces debugfs_remove with debugfs_remove_recursive
      to remove ehci debugfs dir and files. It does fix the bug above,
      and may simplify the removing procedure.
      
      Also, remove the debug_registers, debug_async and debug_periodic
      field from ehci_hcd struct since they are useless now.
      Signed-off-by: default avatarMing Lei <tom.leiming@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      185c9bcf
    • Hauke Mehrtens's avatar
      USB: Add USB 2.0 to ssb ohci driver · f2402f21
      Hauke Mehrtens authored
      This adds USB 2.0 support to ssb ohci driver.
      This patch was used in OpenWRT for a long time now.
      
      CC: Steve Brown <sbrown@cortland.com>
      Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      f2402f21
    • Alessio Igor Bogani's avatar
      USB: cp210x: Add four new device IDs · 356c5a48
      Alessio Igor Bogani authored
      Signed-off-by: default avatarAlessio Igor Bogani <abogani@texware.it>
      Cc: stable <stable@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      356c5a48
    • dranch@trinnet.net's avatar
      USB: ftdi_sio: device id for Navitator · b6180ef7
      dranch@trinnet.net authored
      This patch is to add a US Interface, Inc. "Navigator" USB device.
      Specifically, it's a HAM Radio USB sound modem that also
      incorporates three pairs of unique FTDI serial ports.  The standard
      Linux FTDI serial driver will only recognize the first two serial
      ports of an unknown FDTI derived device and this patch adds in
      recognition to these specific new IDs.
      Signed-off-by: default avatarDavid A. Ranch <dranch@trinnet.net>
      Cc: stable <stable@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
      
      b6180ef7
    • Alan Stern's avatar
      USB: accept RNDIS configs if there's no alternative · c4e0b508
      Alan Stern authored
      This patch (as1410) makes a slight change to the strategy used for
      choosing a default configuration.  Currently we skip configs whose
      first interface is RNDIS, if the kernel wasn't built with the
      corresponding driver.  This risks losing access to the other
      interfaces in those configs.  In addition, if there is only one config
      then we will end up not configuring the device at all.
      
      This changes the logic; now such configurations will be skipped only
      if there is at least one other config.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Tested-by: default avatarAdam Kropelin <akropel1@rochester.rr.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c4e0b508
    • Andrew Bird's avatar
      USB: option: add huawei k3765 k4505 devices to work properly · 0372a754
      Andrew Bird authored
      This patch adds the product IDs of Huawei's K3765 and K4505 mobile
      broadband usb modems to option.c. It also adds a quirk to the option
      probe function so that binding to the device's network interface(class
      0xff) is avoided. This is necessary to allow another driver to bind to
      that, and to avoid programs like wvdial opening a nonfunctioning tty
      during modem discovery.
      Signed-off-by: default avatarAndrew Bird <ajb@spheresystems.co.uk>
      Cc: stable <stable@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      0372a754
    • Michal Nazarewicz's avatar
      USB: gadget: file_storage: serial parameter even if not test mode · 56706491
      Michal Nazarewicz authored
      Moved the serial parameter handling code out of "#ifdef
      CONFIG_USB_FILE_STORAGE_TEST".
      
      This modifies Yann Cantin's commit "USB: Add a serial number
      parameter to g_file_storage" module as per Alan Stern's request.
      Signed-off-by: default avatarMichal Nazarewicz <m.nazarewicz@samsung.com>
      Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
      Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Tested-by: default avatarAnand Gadiyar <gadiyar@ti.com>
      Cc: David Brownell <david-b@pacbell.net>
      Cc: Yann Cantin <yann.cantin@laposte.net>
      56706491
    • Kulikov Vasiliy's avatar
      usb: imx21-hcd: set task state with schedule_timeout_uninterruptible() · 9a4b7c3b
      Kulikov Vasiliy authored
      imx21_hc_reset() uses schedule_timeout() without setting state to
      STATE_(UN)INTERRUPTIBLE. As it is called in cycle without checking of
      pending signals, use schedule_timeout_uninterruptible().
      Signed-off-by: default avatarKulikov Vasiliy <segooon@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      9a4b7c3b
    • John G. Rogers's avatar
      USB: serial: enabling support for Segway RMP in ftdi_sio · afad1964
      John G. Rogers authored
      I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will
      enable support for the Segway Robotic Mobility Platform (RMP200) in the
      ftdi_sio kernel module.  Currently, users of the Segway RMP200 must use
      a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a
      udev rule to get the ftdi_sio module to handle the usb interface and
      mount it on /dev/ttyXXX.  This is not a good solution because some users
      will have multiple USB to Serial converters which will use the ftdi_sio
      module.
      Signed-off-by: default avatarJohn Rogers <jgrogers@gmail.com>
      Cc: stable <stable@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      afad1964
    • Marek Szyprowski's avatar
      USB: s3c-hsotg: add support for clock gating · 31ee04de
      Marek Szyprowski authored
      This patch adds support for clock gating of the HS/OTG block. On S5PV210
      otg gating clock is initally disabled so the driver needs to get and
      enable it before it can access its registers.
      Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
      Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      31ee04de
    • Marek Szyprowski's avatar
      USB: s3c-hsotg: modify only selected bits in S3C_PHYPWR register · 1eb838d3
      Marek Szyprowski authored
      S5PV210 SoCs has 2 USB PHY interfaces, both enabled by writing zero to
      S3C_PHYPWR register. HS/OTG driver uses only PHY0, so do not touch bits
      related to PHY1.
      Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
      Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      1eb838d3
    • Marek Szyprowski's avatar
      USB: s3c-hsotg: fix compilation problem · 4d47166c
      Marek Szyprowski authored
      drivers/usb/gadget/s3c-hsotg.c: In function ‘s3c_hsotg_otgreset’:
      drivers/usb/gadget/s3c-hsotg.c:2816: error: ‘MHZ’ undeclared (first use in this function)
      drivers/usb/gadget/s3c-hsotg.c:2816: error: (Each undeclared identifier is reported only once
      drivers/usb/gadget/s3c-hsotg.c:2816: error: for each function it appears in.)
      Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
      Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      4d47166c
    • Maurus Cuelenaere's avatar
      USB: s3c-hsotg: Add support for external USB clock · e50bf385
      Maurus Cuelenaere authored
      The PLL that drives the USB clock supports 3 input clocks: 12, 24 and 48Mhz.
      This patch adds support to the USB driver for setting the correct register bit
      according to the given clock.
      
      This depends on the following patch:
      [PATCH] ARM: S3C64XX: Add USB external clock definition
      Signed-off-by: default avatarMaurus Cuelenaere <mcuelenaere@gmail.com>
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      e50bf385
    • Ben Dooks's avatar
      USB: s3c-hsotg: Fix OUT packet request retry · a33e7136
      Ben Dooks authored
      If there is more data in the request than we could fit into a single
      hardware request, then check when the OutDone event is received if
      we have more data, and if so, schedule the new data instead of trying
      to complete the request (and in the case of EP0, sending a 0 packet
      in the middle of a transfer).
      
      Also, move the debug message about the current transfer state before
      the warning about a bad transfer.
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      a33e7136
    • Ben Dooks's avatar
      USB: s3c-hsotg: Fix the OUT EP0 limit · b05ca580
      Ben Dooks authored
      The EP0 out limit is the same as the IN limit, so make them the same.
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      b05ca580