- 15 Jan, 2020 36 commits
-
-
Ben Skeggs authored
This will replace the current SECBOOT subdev for handling firmware on secure falcons. Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Will be used in upcoming commits to allow subdevs to better customise themselves based on which (if any) firmware is available. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
These will be used in upcoming commits which will provide more customisation. Signed-off-by: -
Ben Skeggs authored
Shortcut to avoid each subdev having to do this itself. Signed-off-by: -
Ben Skeggs authored
We want to be able to register falcons with ACR during the constructor for the subdev it belongs to, however, we may not have access to the falcon's registers prior to DEVINIT. Delay touching registers until the first time the falcon is acquired. This may temporarily break secboot on non-production boards due to not being able to determine whether the falcon is in debug or production mode, the new ACR subdev will not have this issue, and it's not a use-case that's terribly important for bisectability. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
YueHaibing authored
drivers/gpu/drm/nouveau/nouveau_ttm.c: In function nouveau_vram_manager_new: drivers/gpu/drm/nouveau/nouveau_ttm.c:66:22: warning: variable mem set but not used [-Wunused-but-set-variable] drivers/gpu/drm/nouveau/nouveau_ttm.c: In function nouveau_gart_manager_new: drivers/gpu/drm/nouveau/nouveau_ttm.c:106:22: warning: variable mem set but not used [-Wunused-but-set-variable] They are not used any more, so remove it. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Like other cases, it should use rcu protected 'chan' rather than 'fence->channel' in nouveau_fence_wait_uevent_handler. Fixes: 0ec5f02f ("drm/nouveau: prevent stale fence->channel pointers, and protect with rcu") Signed-off-by:
-
Ben Skeggs authored
Will be used as a basis for implementing changes needed for Turing. Signed-off-by: -
Ben Skeggs authored
Method init is typically ordered by class in the FW image as ThreeD, TwoD, Compute. Due to a bug in parsing the FW into our internal format, we've been accidentally sending Twod + Compute methods to the ThreeD class, as well as Compute methods to the TwoD class - oops. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Dan Carpenter authored
We accidentally set "psb" which is a no-op instead of "*psb" so it generates a static checker warning. We should probably set it before the first error return so that it's always initialized. Fixes: 923f1bd2 ("drm/nouveau/secboot/gm20b: add secure boot support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
James Jones authored
Turing introduced a new simplified page kind scheme, reducing the number of possible page kinds from 256 to 16. It also is the first NVIDIA GPU in which the highest possible page kind value is not reserved as an "invalid" page kind. To address this, the invalid page kind is made an explicit property of the MMU HAL, and a new table of page kinds is added to the tu102 MMU HAL. One hardware change not addressed here is that 0x00 is technically no longer a supported page kind, and pitch surfaces are instead intended to share the block-linear generic page kind 0x06. However, because that will be a rather invasive change to nouveau and 0x00 still works fine in practice on Turing hardware, addressing this new behavior is deferred. Signed-off-by:
James Jones <jajones@nvidia.com> Signed-off-by:
-
James Jones authored
The pointer used to walk the table of move ops and pick the right one for the current GPU was declared static, meaning its state was carried over between invocations of the function, and also made the function non-rentrant and thread-unsafe. Since the table is ordered such that newer GPU methods are listed first, the result of this was that initializing newer GPUs after older GPUs would result in no suitable ttm move acceleration operations being found, and ttm would fall back to CPU blits on the older GPUs. This change declares the walking pointer separately from the table and makes it non-static to fix the logic. Signed-off-by:
-
Wambui Karuga authored
Replace the use of 0 in the pointer assignment with NULL to address the following sparse warning: drivers/gpu/drm/nouveau/nouveau_hwmon.c:744:29: warning: Using plain integer as NULL pointer Signed-off-by:
Wambui Karuga <wambui.karugax@gmail.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Wambui Karuga authored
The local variable `pclks` is defined and set but not used and can therefore be removed. Issue found by coccinelle. Signed-off-by:
-
Wambui Karuga authored
Explicitly declare constants as unsigned long long to address the following sparse warnings: warning: constant is so big it is long v2: convert to unsigned long long for compatibility with 32-bit architectures. Signed-off-by:
-
YueHaibing authored
match_string() returns the array index of a matching string. Use it instead of the open-coded implementation. Signed-off-by:
-
Thierry Reding authored
gp10b uses the new engine enumeration mechanism introduced in the Pascal architecture. As a result, the copy engine, which used to be at index 2 for prior Tegra GPU instantiations, has now moved to index 0. Fix up the index and also use the gp100 variant of the copy engine class because on gp10b the PASCAL_DMA_COPY_B class is not supported. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Thierry Reding authored
There are extra registers that need to be programmed to make the level 2 cache work on GP10B, such as the stream ID register that is used when an SMMU is used to translate memory addresses. Signed-off-by:
-
Thierry Reding authored
The GPUs found on Tegra SoCs have registers that can be used to read the WPR configuration. Use these registers instead of reaching into the memory controller's register space to read the same information. Signed-off-by:
-
Thierry Reding authored
If the GPU clock has not had a rate set, initialize it to the maximum clock rate to make sure it does run. Signed-off-by:
-
Thierry Reding authored
When the GPU powergate is controlled by a generic power domain provider, the reset will automatically be asserted and deasserted as part of the power-ungating procedure. On some Jetson TX2 boards, doing an additional assert and deassert of the GPU outside of the power-ungate procedure can cause the GPU to go into a bad state where the memory interface can no longer access system memory. Signed-off-by:
-
Thierry Reding authored
When Nouveau is instantiated on top of a platform device, the dev->pdev field will be NULL and calling pci_disable_device() will crash. Move the PCI disabling code to the PCI specific driver removal code. Signed-off-by:
-
Thierry Reding authored
There is no BAR2 on GP10B and there is no need to map through BAR2 because all memory is shared between the GPU and the CPU. Add a custom implementation of the fault sub-device that uses nvkm_memory_addr() instead of nvkm_memory_bar2() to return the address of a pinned fault buffer. Signed-off-by:
-
Colin Ian King authored
The sizeof is currently on args.src and args.dst and should be on *args.src and *args.dst. Fortunately these sizes just so happen to be the same size so it worked, however, this should be fixed and it also cleans up static analysis warnings Addresses-Coverity: ("sizeof not portable") Fixes: f268307e ("nouveau: simplify nouveau_dmem_migrate_vma") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Lyude Paul authored
This commit is seperate from the previous one to make it easier to revert in the future. Basically, while working on making MSTOs per-head as opposed to per-head-per-connector I discovered these lovely issues: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277 https://gitlab.gnome.org/GNOME/mutter/issues/759 Note as well that Intel already has a temporary workaround for this in their kernel driver. So, unfortunately we need to follow suit to avoid causing a regression in userspace. Once these issues get fixed, this commit should be reverted. Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Lyude Paul authored
Currently, for every single MST capable DRM connector we create a set of fake encoders, one for each possible head. Unfortunately this ends up being a huge waste of encoders. While this currently isn't causing us any problems, it's extremely close to doing so. The ThinkPad P71 is a good example of this. Originally when trying to figure out why nouveau was failing to load on this laptop, I discovered it was because nouveau was creating too many encoders. This ended up being because we were mistakenly creating MST encoders for the eDP port, however we are still extremely close to hitting the encoder limit on this machine as it exposes 1 eDP port and 5 DP ports, resulting in 31 encoders. So while this fix didn't end up being necessary to fix the P71, we still need to implement this so that we avoid hitting the encoder limit for valid display configurations in the event that some machine with more connectors then this becomes available. Plus, we don't want to let good code go to waste :) So, use less encoders by only creating one MSTO per head. Then, attach each new MSTC to each MSTO which corresponds to a head that it's parent DP port is capable of using. This brings the number of encoders we register on the ThinkPad P71 from 31, down to just 15. Yay! Signed-off-by:
-
Lyude Paul authored
When drm_connector_helper_funcs->atomic_best_encoder is defined, ->best_encoder is ignored by the atomic modesetting helpers. That being said, this hook is completely broken anyway - it always returns the first msto for a given mstc, despite the fact it might already be in use. So, just get rid of it. We'll need this in a moment anyway, when we make mstos per-head as opposed to per-connector. Changes since v1: * Fix typo in documentation - imirkin Signed-off-by:
-
Ilia Mirkin authored
The hardware supports either size. Also add checks to ensure that only these two sizes may be used for supplying a LUT. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Ben Skeggs authored
Commit 5fde30a2684041f9820aa9dc4fbd0009a45076a9 in envytools modified some of the Falcon V5 encodings, regenerate the relevant FW with this. Also modify build rules to include SPDX header in generated files. Tested on GM107, with no issues noted. Signed-off-by:
-
- 13 Jan, 2020 3 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.6-2020-01-10-dp-mst-dsc' of git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.6-2020-01-10-dp-mst-dsc: drm: - Add MST helper for PBN calculation of DSC modes - Parse FEC caps on MST ports - Add MST DPCD R/W functions - Add MST helpers for virtual DPCD aux - Add MST HUB quirk - Add MST DSC enablement helpers amdgpu: - Enable MST DSC - Add fair share algo for DSC bandwidth calcs - Fix for 32 bit builds Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200110214328.308549-1-alexander.deucher@amd.com
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.6-2020-01-09: amdgpu: - Enable DCN support on POWER - Enable GFXOFF for Raven1 refresh - Clean up MM engine idle handlers - HDMI 2.0 audio fixes - Fixes for some 10 bpc EDP panels - Watermark fixes for renoir - SR-IOV fixes - Runtime pm robustness fixes - Arcturus VCN fixes - RAS fixes - BACO fixes for Arcturus - Stable pstate fixes for swSMU - HDCP fixes - PSP cleanup - HDMI fixes - Misc cleanups amdkfd: - Spread interrupt work across cores to reduce latency - Topology fixes for APUs - GPU reset improvements UAPI: - Enable DRIVER_SYNCOBJ_TIMELINE for vulkan - Return better error values for kfd process ioctl Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v5.6: UAPI Changes: Cross-subsystem Changes: - Convert simple panel bindings to a template. Core Changes: - Revert drm-bridge-state changes, it causes a dependency error between drm and drm_kms_helper. - Fix when disabling crc's. - Assorted Kconfig fixes. Driver Changes: - Add ddc symlinks to more drivers. - Fix chained bridge handling in exynos and vc4. - More clock rate fixes in sun4i. - Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP, BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels. - Assorted small bugfixes. Signed-off-by:
-
- 10 Jan, 2020 1 commit
-
-
Mikita Lipski authored
[why] Compilation error "undefined reference to `__udivdi3'" was thrown on i386 architecture. [how] Use div_u64 for unsigned long division instead of a divide operator. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Signed-off-by:
-
