Rahul Lakkireddy says:

====================
cxgb4: enable more tc flower offload matches and actions

This patch series enable more matches and actions for TC Flower
Offload support on Chelsio adapters.

Patch 1 enables matching on IP TOS.

Patch 2 enables matching on VLAN TCI.

Patch 3 adds support for action PASS.

Patch 4 adds support for ETH-DMAC rewrite via TC-PEDIT action. Also,
adds a check to assert that vlan/eth-dmac rewrite actions are valid
only in combination with action egress redirect.

Patch 5 introduces SMT ops for adding/removing entries from SMAC Table
in HW in preparation for patch 6.

Patch 6 adds support for ETH-SMAC rewrite via TC-PEDIT action.

Patch 7 introduces fw_filter2_wr to support L3/L4 header rewrites
in preparation for patch 8.

Patch 8 adds support for rewrite on L3/L4 header fields via TC-PEDIT
action. Supported fields for rewrite are:
IPv4 src/dst address, IPv6 src/dst address, TCP/UDP sport/dport.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support to rewrite L3/L4 fields via TC-PEDIT action.
Supported fields for rewrite are:
IPv4 src/dst address, IPv6 src/dst address, TCP/UDP sport/dport.

Also, process match fields first and then process the action items.

Refactor pedit action validation to separate function to avoid
excessive code indentation.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update driver to use new fw_filter2_wr in order to support rewrite of
L3/L4 header fields via filters. Query FW_PARAMS_PARAM_DEV_FILTER2_WR
to check whether FW supports this new wr.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support for ETH-SMAC rewrite via TC-PEDIT action.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce SMT operations for allocating/removing entries from
SMAC table. Make TCAM filters use the SMT ops whenever SMAC rewrite
is required.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for ETH-DMAC Rewrite via TC-PEDIT action. Also, add
check to assert that vlan/eth-dmac rewrite actions are valid only
in combination with action egress redirect.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for tc flower action PASS.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for matching on vlan tci.  Construct vlan tci match param
based on vlan-id and vlan-pcp values supplied by tc.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for matching on IP TOS.  Also check on ethtype value
to be either IPv4 or IPv6.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

386fd5da ("tcp: Check daddr_cache before use in tracepoint") was the
second version of the tracepoint fixup patch. This patch is the delta
between v2 and v3.  Specifically, remove the use of inet6_sk and check
sk_family as requested by Eric and add IS_ENABLED(CONFIG_IPV6) around
the use of sk_v6_rcv_saddr and sk_v6_daddr as done in sock_common (noted
by Cong).
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Two things:

1) Update examples to show usage of metric
2) Discuss reasoning for using such a high metric.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Add bits for kernel services

Here are some patches that add a few things for kernel services to use:

 (1) Allow service upgrade to be requested and allow the resultant actual
     service ID to be obtained.

 (2) Allow the RTT time of a call to be obtained.

 (3) Allow a kernel service to find out if a call is still alive on a
     server between transmitting a request and getting the reply.

 (4) Allow data transmission to ignore signals if transmission progress is
     being made in reasonable time.  This is also usable by userspace by
     passing MSG_WAITALL to sendmsg()[*].

[*] I'm not sure this is the right interface for this or whether a sockopt
    should be used instead.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2017-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.15

The first pull request for 4.15, unusually late this time but still
relatively small. Also includes merge from wireless-drivers to fix
conflicts in iwlwifi.

Major changes:

rsi

* add P2P mode support

* sdio suspend and resume support

iwlwifi

* A fix and an addition for PCI devices for the A000 family

* Dump PCI registers when an error occurs, to make it easier to debug

rtlwifi

* add support for 64 bit DMA, enabled with a module parameter

* add module parameter to enable ASPM
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

After the change to the tp hash, we now get a build warning
on 32-bit architectures:

net/sched/cls_u32.c: In function 'tc_u_hash':
net/sched/cls_u32.c:338:17: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
  return hash_64((u64) tp->chain->block, U32_HASH_SHIFT);

Using hash_ptr() instead of hash_64() lets us drop the cast
and fixes the warning while still resulting in the same hash
value.

Fixes: 7fa9d974 ("net: sched: cls_u32: use block instead of q in tc_u_common")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tipc_alloc_conn() function never returns NULL, it returns error
pointers, so I have fixed the check.

Fixes: 14c04493 ("tipc: add ability to order and receive topology events in driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
net: sh_eth: add R-Car Gen[12] fallback compatibility strings

Add fallback compatibility strings for R-Car Gen 1 and 2.

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme is being adopted for
drivers for Renesas SoCs.

Changes since v1:
* Correct typos in changelogs
* Consistently use tabs for indentation in bindings document
* Enhance readability of description of bindings usage
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement fallback compatibility strings for R-Car Gen 1 and 2.

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme is being adopted for
drivers for Renesas SoCs.

Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks.  The
approach that has been consistently taken for other IP blocks is to name
common code, compatibility strings and so on after R-Car Gen2.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename structures describing R-Car SoCs as rcar_gen[12]_*
rather than r8a77[79]x_*. This seems a little easier on the
eyes. And will make things slightly cleaner in a follow-up
patch that adds fallback-compatibility strings for these SoCs.

Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks.  The
approach that has been consistently taken for other IP blocks is to name
common code, compatibility strings and so on after R-Car Gen2.

Also rename sh_eth_set_rate_r8a777x as sh_eth_set_rate_rcar as
it it is used by the R-Car generations supported by the driver.

This patch should have no run-time effect and
is compile-tested only.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add fallback compatibility strings for R-Car Gen 1 and 2.

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme is being adopted for
drivers for Renesas SoCs.

Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks.  The
approach that has been consistently taken for other IP blocks is to name
common code, compatibility strings and so on after R-Car Gen2.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dql_init always returned 0, and the only place that uses it
in network core code didn't care about the return value anyway.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case I replaced the "NOBREAK" comment with
a "fall through" comment, which is what GCC is expecting to find.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NULL check before freeing functions like kfree is not needed.

This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Falcon says:

====================
ibmvnic: Enable SG and TSO feature support

This patch set is fairly straightforward. The first patch enables
scatter-gather support in the ibmvnic driver. The following patch
then enables the TCP Segmentation offload feature. The final patch
allows users to enable or disable net device features using ethtool.

Enabling SG and TSO grants a large increase in throughput with TX
speed increasing from 1Gb/s to 9Gb/s in our initial test runs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables TSO support. It includes additional
buffers reserved exclusively for large packets. Throughput
is greatly increased with TSO enabled, from about 1 Gb/s to
9 Gb/s on our test systems.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables scatter gather support. Since there is no
HW/FW scatter-gather support at this time, the driver needs to
loop through each fragment and copy it to a contiguous, pre-mapped
buffer entry.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller hit the WARN() in tun_get_user(), providing skb
with payload in fragments only, and nothing in skb->head

GRO layer is fine with this, so relax the check.

Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pointer opt has a null check however before for this check opt is
dereferenced when len is initialized, hence we potentially have a null
pointer deference on opt.  Avoid this by checking for a null opt before
dereferencing it.

Detected by CoverityScan, CID#1458234 ("Dereference before null check")

Fixes: 4e8b86c0 ("mqprio: Introduce new hardware offload mode and shaper in mqprio")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a problem when we do:

	sequence = pkg->hdr.length_sn & TBIP_HDR_SN_MASK;
	sequence >>= TBIP_HDR_SN_SHIFT;

TBIP_HDR_SN_SHIFT is 27, and right shifting a u8 27 bits is always
going to result in zero.  The fix is to declare these variables as u32.

Fixes: e69b6c02 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The problematic code looks like this:

	res_seq = res_hdr->xd_hdr.length_sn & TB_XDOMAIN_SN_MASK;
	res_seq >>= TB_XDOMAIN_SN_SHIFT;

TB_XDOMAIN_SN_SHIFT is 27, and right shifting a u8 27 bits is always
going to result in zero.  The fix is to declare these variables as u32.

Fixes: d1ff7024 ("thunderbolt: Add support for XDomain discovery protocol")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Netanel Belgazal says:
====================
update ENA driver to releawse 1.3.0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new statistic to ethtool stats that show the number of packets
without transmit acknowledgement from ENA device.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove ena_device_io_suspend/resume() methods
Those methods were intend to be used by the device to trigger
suspend/resume but eventually it was dropped.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ena admin commands timeout is in resolutions of 100ms.
Therefore, When the driver works in polling mode, it sleeps for 100ms
each time. The overall boot time of the ENA driver is ~1.5 sec.
To reduce the boot time, This change modifies the granularity of
the sleeps to 5ms.
This change improves the boot time to 220ms.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ENA driver was developed by developers from Annapurna Labs.
Annapurna Labs was acquired by Amazon and the company's domain
(@annapurnalabs.com) will become deprecated soon.

Update the email addresses of the maintainers to the alternative amazon
emails (@amazon.com)
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Out of order flow is not working for iWARP.
This patch got cut out from initial series that added out
of order support for iWARP.

Make out of order code common for iWARP and iSCSI.
Add new configuration option CONFIG_QED_OOO. Set by
qedr and qedi Kconfigs.

Fixes: d1abfd0b ("qed: Add iWARP out of order support")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>