- 23 Jan, 2019 40 commits
-
-
Yunsheng Lin authored
This patch sets the TC weight in SSU module according to info in tm_info. Also, zero weight of TC weight in SSU ETS module means enabling strict priority, so do not allow zero weight when in ETS mode. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
GE MAC does not support PFC, when driver is initializing and MAC is in GE Mode, ignore the fw not supported error, otherwise initialization will fail. Signed-off-by:
-
Yunsheng Lin authored
According to firmware error code definition, the error code of 2 means NOT_SUPPORTED, this patch changes it to NOT_SUPPORTED. Signed-off-by:
-
Peng Li authored
Param pending_buf and skb may be not NULL when free ring. This patch clears them when free ring. Signed-off-by:
-
Huazhong Tan authored
The current code returns the number of all queues that can be used and the number of queues that have been allocated, which is incorrect. What should be returned is the number of queues allocated for each enabled TC and the number of queues that can be allocated. This patch fixes it. Fixes: 849e4607 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by:
-
Yunsheng Lin authored
Shaper setting does not change currently, when TC num changes, which may cause shaper parameter not setting problem. This patch fixes it by setting the shaper parameter when TC num changes. Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by:
-
Yunsheng Lin authored
Currently rss configuration set by user will be lost when setting channel. This patch fixes it by not setting rss configuration to default if user has configured the rss. Fixes: 09f2af64 ("net: hns3: add support to modify tqps number") Signed-off-by:
-
Jian Shen authored
In origin codes, there are some statistics item are got from mac, which also include the packets statistics of VF. It is unreasonable. This patch fixes it by counting them in the rx/tx processing flow. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Jian Shen authored
This patch adds rx multicast packets statistic for each ring. Signed-off-by:
-
Peng Li authored
This patch adds calling roce callback function when link status change. Signed-off-by:
Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add VXLAN support for Spectrum-2 This patchset adds support for VXLAN tunneling on the Spectrum-2 ASIC. Spectrum-1 and Spectrum-2 are largely backward compatible in this area, so not too many changes are required. Patches #1-#2 expose a function and perform small refactoring towards the actual Spectrum-2 implementation in patches #3-#4. Patch #3 adds the required initialization steps on Spectrum-2. Patch #4 finally enables VXLAN on Spectrum-2. ==================== Signed-off-by: -
Ido Schimmel authored
Enable VXLAN on Spectrum-2 as previous patches added the required functionality. Note that for now Spectrum-1 and Spectrum-2 use the same function to determine whether the VXLAN configuration is valid or not. In the future, when the driver will be extended to support features not present in Spectrum-1, two different functions will be needed. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Spectrum-1 and Spectrum-2 are largely backward compatible with regards to VXLAN. One difference - as explained in previous patch - is that an underlay RIF needs to be specified instead of an underlay VR during NVE initialization. This is accomplished by calling the relevant function that returns the index of such a RIF based on the table ID (RT_TABLE_MAIN) where underlay look up occurs. The second difference is that VXLAN learning (snooping) is controlled via a different register (TNPC). Signed-off-by:
-
Ido Schimmel authored
The configuration of a VXLAN tunnel in Spectrum-1 and Spectrum-2 is largely the same. To avoid code duplication, breakout the common parts to a common function that can be invoked from the ASIC-specific code. Signed-off-by:
-
Ido Schimmel authored
In Spectrum-2, instead of providing the ID of the virtual router (VR) where NVE underlay lookups will occur as in Spectrum-1, the ID of a router interface (RIF) in this VR is required. Expose functions to create and destroy such a RIF. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/mellanox/mlx4/eq.c: In function ‘mlx4_eq_int’: drivers/net/ethernet/mellanox/mlx4/mlx4.h:219:5: warning: this statement may fall through [-Wimplicit-fallthrough=] if (mlx4_debug_level) \ ^ drivers/net/ethernet/mellanox/mlx4/eq.c:558:4: note: in expansion of macro ‘mlx4_dbg’ mlx4_dbg(dev, "%s: MLX4_EVENT_TYPE_SRQ_LIMIT. srq_no=0x%x, eq 0x%x\n", ^~~~~~~~ drivers/net/ethernet/mellanox/mlx4/eq.c:561:3: note: here case MLX4_EVENT_TYPE_SRQ_CATAS_ERROR: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/qlogic/qed/qed_cxt.c:2126:4: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/brocade/bna/bfa_ioc.c:790:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/brocade/bna/bfa_ioc.c:860:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by:
Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c:6336:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2231:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/tg3.c:722:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/tg3.c:783:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/3com/3c509.c:1265:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/3com/3c509.c:1271:8: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: net/tipc/link.c:1125:6: warning: this statement may fall through [-Wimplicit-fallthrough=] net/tipc/socket.c:736:6: warning: this statement may fall through [-Wimplicit-fallthrough=] net/tipc/socket.c:2418:7: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Recently, there were bunch of fixes to bnx2x driver, the code is now aligned to out-of-box driver version 1.713.36. This patch updates bnx2x driver version to 1.713.36. Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Nathan Chancellor authored
When building this code on a 32-bit platform such as ARM, there is a link time error (lld error shown, happpens with ld.bfd too): ld.lld: error: undefined symbol: __aeabi_uldivmod >>> referenced by devlink.c >>> net/core/devlink.o:(devlink_health_buffers_create) in archive built-in.a This happens when using a regular division symbol with a u64 dividend. Use DIV_ROUND_UP_ULL, which wraps do_div, to avoid this situation. Fixes: cb5ccfbe ("devlink: Add health buffer support") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Some of the PHY and MDIO drivers refer to the COPYING file in the main directory of this archive. This is the main license for Linux, thus GPLv2 plus syscall extension. Fixup the MODULE_LICENSE() where needed and add an SDPX header for GPLv2. Cc: David Daney <david.daney@cavium.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
A few PHY drivers have the GPLv2 license text. They then either have a MODULE_LICENSE() of GPLv2+, or an SPDX tag of GPLv2+. Since the license text is much easier to understand than either the SPDX tag or the MODULE_LICENSE, use it as the definitive source of the licence, and fixup with others when there are contradictions. Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Scott Wood <scottwood@freescale.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Andrew F. Davis <afd@ti.com> Acked-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== SPDX tags for PHY and MDIO drivers This patchset adds SPDX tags to files where the license information is clear and consistent. It also removes redundent license text when an SPDX header is present. ==================== Signed-off-by: -
Andrew Lunn authored
The SPDX header makes any license text redundent. Remove it. Signed-off-by:
-
Andrew Lunn authored
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by:
-
Vishal Kulkarni authored
1) Speed should be supported by Physical Port Capabilities. 2) report Forward Error Correction mode which are available. 3) Added few comments. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== selftests: forwarding: Add tests for VXLAN routing VXLAN routing allows hosts in different overlay networks (i.e., different VNIs) to communicate with one another. Two popular routing models are asymmetric and symmetric routing. In asymmetric routing the ingress VTEP routes the packet into the correct VXLAN tunnel, whereas the egress VTEP only bridges the packet to the correct host. Therefore, packets in different directions use different VNIs - the target VNI. In symmetric routing both the ingress and egress VTEPs perform routing in the overlay network into / from the VXLAN tunnel. Packets in different directions use the same VNI - the L3 VNI. Different tenants (VRFs) use different L3 VNIs. Patch #1 adds a test for asymmetric routing. Patches #2-#3 reuse the topology and add test cases for ARP decapsulation and suppression. Patch #4 adds a test for symmetric routing. ==================== Signed-off-by: -
Ido Schimmel authored
ARP suppression allows the Linux bridge to answer ARP requests on behalf of remote hosts. It reduces the amount of packets a VTEP needs to flood. This test verifies that ARP suppression on / off works when a neighbour exists and when it does not exist. It does so by sending an ARP request from a host connected to one VTEP and checking whether it was received by a second VTEP. Signed-off-by:
-
Ido Schimmel authored
In a similar fashion to the asymmetric test, add a test for symmetric routing. In symmetric routing both the ingress and egress VTEPs perform routing in the overlay network into / from the VXLAN tunnel. Packets in different directions use the same VNI - the L3 VNI. Different tenants (VRFs) use different L3 VNIs. Signed-off-by:
-
Ido Schimmel authored
Verify that ARP packets are correctly decapsulated by the ingress VTEP by removing the neighbours configured on both VLAN interfaces and running a ping test. Signed-off-by:
-
Ido Schimmel authored
In asymmetric routing the ingress VTEP routes the packet into the correct VXLAN tunnel, whereas the egress VTEP only bridges the packet to the correct host. Therefore, packets in different directions use different VNIs - the target VNI. The test uses a simple topology with two VTEPs and two VNIs and verifies that ping passes between hosts (local / remote) in the same VLAN (VNI) and in different VLANs belonging to the same tenant (VRF). While the test does not check VM mobility, it does configure an anycast gateway using a macvlan device on both VTEPs. Signed-off-by:
-
David S. Miller authored
Yangbo Lu says: ==================== External trigger stamp fifo support for ptp_qoriq This patch-set is to add external trigger stamp fifo support by a new binding "fsl,extts-fifo", and to add fiper pulse loopback support which is very useful for validating trigger without external hardware. Also fixed issues in interrupt enabling/handling. "fsl,extts-fifo" is required to be added into 1588 timer dts node whose hardware supports it. The work will be done for some QorIQ platforms dts in the near future. ==================== Signed-off-by: -
Yangbo Lu authored
Added drivers/ptp/ptp_qoriq_debugfs.c into QorIQ PTP clock driver list. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
Yangbo Lu authored
This patch is to add debugfs support for ptp_qoriq. Current debugfs supports to control fiper1/fiper2 loopback mode. If the loopback mode is enabled, the fiper1/fiper2 pulse is looped back into trigger1/ trigger2 input. This is very useful for validating hardware and driver without external hardware. Below is an example to enable fiper1 loopback. echo 1 > /sys/kernel/debug/2d10e00.ptp_clock/fiper1-loopback Signed-off-by:
-
Yangbo Lu authored
This patch is to add external trigger stamp fifo support for 1588 timer. Signed-off-by:
-
Yangbo Lu authored
Documented "fsl,extts-fifo" property. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Yangbo Lu authored
The external trigger stamp FIFO was introduced as a new feature for QorIQ 1588 timer IP block. This patch is to support it by adding a new dts property "fsl,extts-fifo". Any QorIQ 1588 timer supporting this feature is required to add this property in its dts node. In addition, the FIFO should be cleaned up before enabling external trigger interrupts. Otherwise, there will be interrupts immediately just after enabling external trigger interrupts. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
