- 02 Jun, 2020 25 commits
-
-
Christophe Leroy authored
To enable/disable kernel access to user space, the 8xx has to modify the properties of access group 1. This is done by writing predefined values into SPRN_Mx_AP registers. As of today, a __put_user() gives: 00000d64 <my_test>: d64: 3d 20 4f ff lis r9,20479 d68: 61 29 ff ff ori r9,r9,65535 d6c: 7d 3a c3 a6 mtspr 794,r9 d70: 39 20 00 00 li r9,0 d74: 90 83 00 00 stw r4,0(r3) d78: 3d 20 6f ff lis r9,28671 d7c: 61 29 ff ff ori r9,r9,65535 d80: 7d 3a c3 a6 mtspr 794,r9 d84: 4e 80 00 20 blr Because only groups 0 and 1 are used, the definition of groups 2 to 15 doesn't matter. By setting unused bits to 0 instead on 1, one instruction is removed for each lock and unlock action: 00000d5c <my_test>: d5c: 3d 20 40 00 lis r9,16384 d60: 7d 3a c3 a6 mtspr 794,r9 d64: 39 20 00 00 li r9,0 d68: 90 83 00 00 stw r4,0(r3) d6c: 3d 20 60 00 lis r9,24576 d70: 7d 3a c3 a6 mtspr 794,r9 d74: 4e 80 00 20 blr Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/57425c33dd72f292b1a23570244b81419072a7aa.1586945153.git.christophe.leroy@c-s.fr
-
Christophe Leroy authored
kprobe does not handle events happening in real mode. The very last part of exception exits cannot support a trap. Blacklist them from kprobe. While we are at it, remove exc_exit_start symbol which is not used to avoid having to blacklist it. Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode. The very last part of syscall cannot support a trap. Add a symbol syscall_exit_finish to identify that part and blacklist it from kprobe. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode. As exception entry points are running with MMU disabled, blacklist them. The handling of TLF_NAPPING and TLF_SLEEPING is moved before the CONFIG_TRACE_IRQFLAGS which contains 'reenable_mmu' because from there kprobe will be possible as the kernel will run with MMU enabled. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
machine_check_in_rtas() is just a trap. Do the trap directly in the machine check exception handler. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
In hash_low.S, a lot of named local symbols are used instead of numbers to ease code readability. However, they don't need to be visible. In order to ease blacklisting of functions running with MMU disabled for kprobe, rename the symbols to .Lsymbols in order to hide them as if they were numbered labels. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
In order to avoid Oopses, use probe_address() to read the instruction at the address where the trap happened. Signed-off-by:
-
Michael Neuling authored
This gives us OF_PMEM which is useful in mambo. This adds 153K to the text of ppc64le_defconfig which 0.8% of the total text. LIBNVDIMM text data bss dec hex Without 18574833 5518150 1539240 25632223 1871ddf With 18727834 5546206 1539368 25813408 189e1a0 Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Leonardo Bras authored
Implement rtas_call_reentrant() for reentrant rtas-calls: "ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive". On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4, items 2 and 3 say: 2 - For the PowerPC External Interrupt option: The * call must be reentrant to the number of processors on the platform. 3 - For the PowerPC External Interrupt option: The * argument call buffer for each simultaneous call must be physically unique. So, these rtas-calls can be called in a lockless way, if using a different buffer for each cpu doing such rtas call. For this, it was suggested to add the buffer (struct rtas_args) in the PACA struct, so each cpu can have it's own buffer. The PACA struct received a pointer to rtas buffer, which is allocated in the memory range available to rtas 32-bit. Reentrant rtas calls are useful to avoid deadlocks in crashing, where rtas-calls are needed, but some other thread crashed holding the rtas.lock. This is a backtrace of a deadlock from a kdump testing environment: #0 arch_spin_lock #1 lock_rtas () #2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0) #3 ics_rtas_mask_real_irq (hw_irq=4100) #4 machine_kexec_mask_interrupts #5 default_machine_crash_shutdown #6 machine_crash_shutdown #7 __crash_kexec #8 crash_kexec #9 oops_end Signed-off-by:
Leonardo Bras <leobras.c@gmail.com> [mpe: Move under #ifdef PSERIES to avoid build breakage] Signed-off-by:
-
Leonardo Bras authored
In order to get any rtas* struct into other headers, including rtas.h may cause a lot of errors, regarding include dependency needed for inline functions. Create rtas-types.h and move there all type/struct definitions from rtas.h, then include rtas-types.h into rtas.h. Also, as suggested by checkpath.pl, replace uint8_t for u8. Signed-off-by:
-
Leonardo Bras authored
Currently, if printk lock (logbuf_lock) is held by other thread during crash, there is a chance of deadlocking the crash on next printk, and blocking a possibly desired kdump. At the start of default_machine_crash_shutdown, make printk enter NMI context, as it will use per-cpu buffers to store the message, and avoid locking logbuf_lock. Suggested-by:
-
Leonardo Bras authored
While providing guests, it's desirable to resize it's memory on demand. By now, it's possible to do so by creating a guest with a small base memory, hot-plugging all the rest, and using 'movable_node' kernel command-line parameter, which puts all hot-plugged memory in ZONE_MOVABLE, allowing it to be removed whenever needed. But there is an issue regarding guest reboot: If memory is hot-plugged, and then the guest is rebooted, all hot-plugged memory goes to ZONE_NORMAL, which offers no guaranteed hot-removal. It usually prevents this memory to be hot-removed from the guest. It's possible to use device-tree information to fix that behavior, as it stores flags for LMB ranges on ibm,dynamic-memory-vN. It involves marking each memblock with the correct flags as hotpluggable memory, which mm/memblock.c puts in ZONE_MOVABLE during boot if 'movable_node' is passed. For carrying such information, the new flag DRCONF_MEM_HOTREMOVABLE was proposed and accepted into Power Architecture documentation. This flag should be: - true (b=1) if the hypervisor may want to hot-remove it later, and - false (b=0) if it does not care. During boot, guest kernel reads the device-tree, early_init_drmem_lmb() is called for every added LMBs. Here, checking for this new flag and marking memblocks as hotplugable memory is enough to get the desirable behavior. This should cause no change if 'movable_node' parameter is not passed in kernel command-line. Signed-off-by:
Leonardo Bras <leonardo@linux.ibm.com> Reviewed-by:
Bharata B Rao <bharata@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
Show the address of the tasks regs in the process listing in xmon. The regs should always be on the stack page that we also print the address of, but it's still helpful not to have to find them by hand. Signed-off-by:
-
Michael Ellerman authored
This adds the CPU or thread number to printk messages. This helps a lot when deciphering concurrent oopses that have been interleaved. Example output, of PID1 (T1) triggering a warning: [ 1.581678][ T1] WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:539 pkcs1pad_verify+0x38/0x140 [ 1.581681][ T1] Modules linked in: [ 1.581693][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty #1515 [ 1.581700][ T1] NIP: c000000000207d64 LR: c000000000207d3c CTR: c000000000207d2c [ 1.581708][ T1] REGS: c0000000fd2e7560 TRAP: 0700 Not tainted (5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty) [ 1.581712][ T1] MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44000222 XER: 00040000 Signed-off-by:
-
Michael Neuling authored
Currently when we boot on a big core system, we get this print: [ 0.040500] Using small cores at SMT level This is misleading as we've actually detected big cores. This patch clears up the print to say we've detect big cores but are using small cores for scheduling. Signed-off-by:
-
Hari Bathini authored
If the memory chunk found for reserving memory overshoots the memory limit imposed, do not proceed with reserving memory. Default behavior was this until commit 140777a3 ("powerpc/fadump: consider reserved ranges while reserving memory") changed it unwittingly. Fixes: 140777a3 ("powerpc/fadump: consider reserved ranges while reserving memory") Cc: stable@vger.kernel.org Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Signed-off-by:
-
Pingfan Liu authored
'mem=" option is an easy way to put high pressure on memory during some test. Hence after applying the memory limit, instead of total mem, the actual usable memory should be considered when reserving mem for crashkernel. Otherwise the boot up may experience OOM issue. E.g. it would reserve 4G prior to the change and 512M afterward, if passing crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G", and mem=5G on a 256G machine. This issue is powerpc specific because it puts higher priority on fadump and kdump reservation than on "mem=". Referring the following code: if (fadump_reserve_mem() == 0) reserve_crashkernel(); ... /* Ensure that total memory size is page-aligned. */ limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE); memblock_enforce_memory_limit(limit); While on other arches, the effect of "mem=" takes a higher priority and pass through memblock_phys_mem_size() before calling reserve_crashkernel(). Signed-off-by:Pingfan Liu <kernelfans@gmail.com> Reviewed-by:
-
Ravi Bangoria authored
kbuild test robot reported some build warnings in the hw_breakpoint code when compiled with clang[1]. Some of them were introduced by the recent powerpc change to add arch_reserve_bp_slot() and arch_release_bp_slot(). Fix them all. kernel/events/hw_breakpoint.c:71:12: warning: no previous prototype for function 'hw_breakpoint_weight' kernel/events/hw_breakpoint.c:216:12: warning: no previous prototype for function 'arch_reserve_bp_slot' kernel/events/hw_breakpoint.c:221:13: warning: no previous prototype for function 'arch_release_bp_slot' kernel/events/hw_breakpoint.c:228:13: warning: no previous prototype for function 'arch_unregister_hw_breakpoint' [1]: https://lore.kernel.org/linuxppc-dev/202005192233.oi9CjRtA%25lkp@intel.com/ Fixes: 29da4f91 ("powerpc/watchpoint: Don't allow concurrent perf and ptrace events") Reported-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> [mpe: Drop extern, flesh out change log, add Fixes tag] Signed-off-by:
-
- 28 May, 2020 15 commits
-
-
Ram Pai authored
XIVE interrupt controller uses an Event Queue (EQ) to enqueue event notifications when an exception occurs. The EQ is a single memory page provided by the O/S defining a circular buffer, one per server and priority couple. On baremetal, the EQ page is configured with an OPAL call. On pseries, an extra hop is necessary and the guest OS uses the hcall H_INT_SET_QUEUE_CONFIG to configure the XIVE interrupt controller. The XIVE controller being Hypervisor privileged, it will not be allowed to enqueue event notifications for a Secure VM unless the EQ pages are shared by the Secure VM. Hypervisor/Ultravisor still requires support for the TIMA and ESB page fault handlers. Until this is complete, QEMU can use the emulated XIVE device for Secure VMs, option "kernel_irqchip=off" on the QEMU pseries machine. Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Reviewed-by:
Cedric Le Goater <clg@kaod.org> Reviewed-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
-
Kajol Jain authored
Function 'read_sys_info_pseries()' is added to get system parameter values like number of sockets and chips per socket. and it gets these details via rtas_call with token "PROCESSOR_MODULE_INFO". Incase lpar migrate from one system to another, system parameter details like chips per sockets or number of sockets might change. So, it needs to be re-initialized otherwise, these values corresponds to previous system values. This patch adds a call to 'read_sys_info_pseries()' from 'post-mobility_fixup()' to re-init the physsockets and physchips values Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
-
Kajol Jain authored
Add documentation for the following sysfs files: /sys/devices/hv_24x7/interface/chipspersocket, /sys/devices/hv_24x7/interface/sockets, /sys/devices/hv_24x7/interface/coresperchip Signed-off-by:
-
Kajol Jain authored
To expose the system dependent parameter like total number of sockets and numbers of chips per socket, patch adds two sysfs files. "sockets" and "chips" are added to /sys/devices/hv_24x7/interface/ of the "hv_24x7" pmu. Signed-off-by:
-
Kajol Jain authored
For hv_24x7 socket/chip level events, specific chip-id to which the data requested should be added as part of pmu events. But number of chips/socket in the system details are not exposed. Patch implements read_24x7_sys_info() to get system parameter values like number of sockets, cores per chip and chips per socket. Rtas_call with token "PROCESSOR_MODULE_INFO" is used to get these values. Subsequent patch exports these values via sysfs. Patch also make these parameters default to 1. Signed-off-by:
-
Kajol Jain authored
Commit 2b206ee6 ("powerpc/perf/hv-24x7: Display change in counter values")' added to print _change_ in the counter value rather then raw value for 24x7 counters. Incase of transactions, the event count is set to 0 at the beginning of the transaction. It also sets the event's prev_count to the raw value at the time of initialization. Because of setting event count to 0, we are seeing some weird behaviour, whenever we run multiple 24x7 events at a time. For example: command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/, hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}" -C 0 -I 1000 sleep 100 1.000121704 120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 1.000121704 5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 2.000357733 8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 2.000357733 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 4.000641884 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ Getting these large values in case we do -I. As we are setting event_count to 0, for interval case, overall event_count is not coming in incremental order. As we may can get new delta lesser then previous count. Because of which when we print intervals, we are getting negative value which create these large values. This patch removes part where we set event_count to 0 in function 'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count to the raw value at the time of initialization to print change value. With this patch In power9 platform command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/, hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}" -C 0 -I 1000 sleep 100 1.000117685 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 1.000117685 1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 2.000349331 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 2.000349331 2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 3.000495900 131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 3.000495900 4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 4.000645920 204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 4.000645920 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 4.284169997 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ Suggested-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Oliver O'Halloran authored
pnv_pci_ioda_configure_bus() should now only ever be called when a device is added to the bus so add a WARN_ON() to the empty bus check. Similarly, pnv_pci_ioda_setup_bus_PE() should only ever be called for an unconfigured PE, so add a WARN_ON() for that case too. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Oliver O'Halloran authored
Doing it once during boot rather than doing it on the fly and drop the janky populated logic. Signed-off-by:
-
Oliver O'Halloran authored
For normal PHBs IODA PEs are handled on a per-bus basis so all the devices on that bus will share a PE. Which PE specificly is determined by the location of the MMIO BARs for the devices on the bus so we can't actually configure the bus PEs until after MMIO resources are allocated. As a result PEs are currently configured by pcibios_setup_bridge(), which is called just before the bridge windows are programmed into the bus' parent bridge. Configuring the bus PE here causes a few problems: 1. The root bus doesn't have a parent bridge so setting up the PE for the root bus requires some hacks. 2. The PELT-V isn't setup correctly because pnv_ioda_set_peltv() assumes that PEs will be configured in root-to-leaf order. This assumption is broken because resource assignment is performed depth-first so the leaf bridges are setup before their parents are. The hack mentioned in 1) results in the "correct" PELT-V for busses immediately below the root port, but not for devices below a switch. 3. It's possible to break the sysfs PCI rescan feature by removing all the devices on a bus. When the last device is removed from a PE its will be de-configured. Rescanning the devices on a bus does not cause the bridge to be reconfigured rendering the devices on that bus unusable. We can address most of these problems by moving the PE setup out of pcibios_setup_bridge() and into pcibios_bus_add_device(). This fixes 1) and 2) because pcibios_bus_add_device() is called on each device in root-to-leaf order so PEs for parent buses will always be configured before their children. It also fixes 3) by ensuring the PE is configured before initialising DMA for the device. In the event the PE was de-configured due to removing all the devices in that PE it will now be reconfigured when a new device is added since there's no dependecy on the bridge_setup() hook being called. Signed-off-by:
-
Oliver O'Halloran authored
For each PHB we maintain a reverse-map that can be used to find the PE that a BDFN is currently mapped to. Add a helper for doing this lookup so we can check if a PE has been configured without looking at pdn->pe_number. Signed-off-by:
-
Oliver O'Halloran authored
It's pretty obsecure and confused me for a long time so I figured it's worth documenting properly. Signed-off-by:
-
Oliver O'Halloran authored
Quite useful to know in some cases. Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Oliver O'Halloran authored
The NVlink IOMMU group setup is only relevant to NVLink devices so move it into the NPU containment zone. This let us remove some prototypes in pci.h and staticfy some function definitions. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Oliver O'Halloran authored
Move it in with the rest of the TCE wrangling rather than carting around a static prototype in pci-ioda.c Signed-off-by:
-
Oliver O'Halloran authored
No longer used. Signed-off-by:
-
