- 14 Jul, 2020 40 commits
-
-
Vladimir Oltean authored
Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxim Kochetkov authored
The ocelot_wm_encode function deals with setting thresholds for pause frame start and stop. In Ocelot and Felix the register layout is the same, but for Seville, it isn't. The easiest way to accommodate Seville hardware configuration is to introduce a function pointer for setting this up. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
-
Maxim Kochetkov authored
Seville has a different bitwise layout than Ocelot and Felix. Signed-off-by:
-
Vladimir Oltean authored
The Ocelot switches do not support flow control on Ethernet interfaces where a DSA tag must be added. If pause frames are enabled, they will be encapsulated in the DSA tag just like regular frames, and the DSA master will not recognize them. Signed-off-by:
-
Vladimir Oltean authored
We don't want ocelot_port_set_maxlen to enable pause frame TX, just to adjust the pause thresholds. Move the unconditional enabling of pause TX to ocelot_init_port. There is no good place to put such setting because it shouldn't be unconditional. But at the moment it is, we're not changing that. Signed-off-by:
-
Vladimir Oltean authored
With this patch we try to kill 2 birds with 1 stone. First of all, some switches that use tag_ocelot.c don't have the exact same bitfield layout for the DSA tags. The destination ports field is different for Seville VSC9953 for example. So the choices are to either duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow take into account a supposed ocelot->dest_ports_offset when packing this field into the DSA injection header (again not ideal). Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero and call some packing() functions of dubious performance in the fastpath. And most of the values it needs to pack are pretty much constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good if we could improve that. The proposed solution is to allocate a memory area per port at probe time, initialize that with the statically defined bits as per chip hardware revision, and just perform a simpler memcpy in the fastpath. Other alternatives have been analyzed, such as: - Create a separate tag_seville.c: too much code duplication for just 1 bit field difference. - Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like tag_brcm.c, which would have a separate .xmit function. Again, too much code duplication for just 1 bit field difference. - Allocate the template from the init function of the tag_ocelot.c module, instead of from the driver: couldn't figure out a method of accessing the correct port template corresponding to the correct tagger in the .xmit function. Signed-off-by:
-
Vladimir Oltean authored
Currently Felix and Ocelot share the same bit layout in these per-port registers, but Seville does not. So we need reg_fields for that. Actually since these are per-port registers, we need to also specify the number of ports, and register size per port, and use the regmap API for multiple ports. There's a more subtle point to be made about the other 2 register fields: - QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG - QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE which we are not writing any longer, for 2 reasons: - Using the previous API (ocelot_write_rix), we were only writing 1 for Felix and Ocelot, which was their hardware-default value, and which there wasn't any intention in changing. - In the case of SCH_NEXT_CFG, in fact Seville does not have this register field at all, and therefore, if we want to have common code we would be required to not write to it. Signed-off-by:
-
Maxim Kochetkov authored
Add the register definitions for the MSCC MIIM MDIO controller in preparation for seville_vsc9959.c to create its accessors for the internal MDIO bus. Since we've introduced elements to ocelot_regfields that are not instantiated by felix and ocelot, we need to define the size of the regfields arrays explicitly, otherwise ocelot_regfields_init, which iterates up to REGFIELD_MAX, will fault on the undefined regfield entries (if we're lucky). Signed-off-by:
-
Vladimir Oltean authored
At the moment, there are some minimal register differences between VSC7514 Ocelot and VSC9959 Felix. To be precise, the PCS1G registers are missing from Felix because it was integrated with an NXP PCS. But with VSC9953 Seville (not yet introduced), the register differences are more pronounced. The MAC registers are located at different offsets within the DEV_GMII target. So we need to refactor the driver to keep a regmap even for per-port registers. The callers of the ocelot_port_readl and ocelot_port_writel were kept unchanged, only the implementation is now more generic. Signed-off-by:
-
Ido Schimmel authored
Dereferencing the reporter after it was destroyed in order to unlock the reporters lock results in a use-after-free [1]. Fix this by storing a pointer to the lock in a local variable before destroying the reporter. [1] ================================================================== BUG: KASAN: use-after-free in devlink_health_reporter_destroy+0x15c/0x1b0 net/core/devlink.c:5476 Read of size 8 at addr ffff8880650fd020 by task syz-executor.1/904 CPU: 0 PID: 904 Comm: syz-executor.1 Not tainted 5.8.0-rc2+ #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 devlink_health_reporter_destroy+0x15c/0x1b0 net/core/devlink.c:5476 nsim_dev_health_exit+0x8b/0xe0 drivers/net/netdevsim/health.c:317 nsim_dev_reload_destroy+0x7f/0x110 drivers/net/netdevsim/dev.c:1134 nsim_dev_reload_down+0x6e/0xd0 drivers/net/netdevsim/dev.c:712 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x4748ad Code: Bad RIP value. RSP: 002b:00007fd0358adc38 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000056bf00 RCX: 00000000004748ad RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004d1a4b R14: 00007fd0358ae6b4 R15: 00007fd0358add80 Allocated by task 539: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] __devlink_health_reporter_create+0x91/0x2f0 net/core/devlink.c:5359 devlink_health_reporter_create+0xa1/0x170 net/core/devlink.c:5431 nsim_dev_health_init+0x95/0x3a0 drivers/net/netdevsim/health.c:279 nsim_dev_probe+0xb1e/0xeb0 drivers/net/netdevsim/dev.c:1086 really_probe+0x287/0x6d0 drivers/base/dd.c:525 driver_probe_device+0xfe/0x1d0 drivers/base/dd.c:701 __device_attach_driver+0x21e/0x290 drivers/base/dd.c:807 bus_for_each_drv+0x161/0x1e0 drivers/base/bus.c:431 __device_attach+0x21a/0x360 drivers/base/dd.c:873 bus_probe_device+0x1e6/0x290 drivers/base/bus.c:491 device_add+0xaf2/0x1b00 drivers/base/core.c:2680 nsim_bus_dev_new drivers/net/netdevsim/bus.c:336 [inline] new_device_store+0x374/0x590 drivers/net/netdevsim/bus.c:215 bus_attr_store+0x75/0xa0 drivers/base/bus.c:122 sysfs_kf_write+0x113/0x170 fs/sysfs/file.c:138 kernfs_fop_write+0x25d/0x480 fs/kernfs/file.c:315 __vfs_write+0x7c/0x100 fs/read_write.c:495 vfs_write+0x265/0x5e0 fs/read_write.c:559 ksys_write+0x12d/0x250 fs/read_write.c:612 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 904: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4063 devlink_health_reporter_free net/core/devlink.c:5449 [inline] devlink_health_reporter_put+0xb7/0xf0 net/core/devlink.c:5456 __devlink_health_reporter_destroy net/core/devlink.c:5463 [inline] devlink_health_reporter_destroy+0x11b/0x1b0 net/core/devlink.c:5475 nsim_dev_health_exit+0x8b/0xe0 drivers/net/netdevsim/health.c:317 nsim_dev_reload_destroy+0x7f/0x110 drivers/net/netdevsim/dev.c:1134 nsim_dev_reload_down+0x6e/0xd0 drivers/net/netdevsim/dev.c:712 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8880650fd000 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 32 bytes inside of 512-byte region [ffff8880650fd000, ffff8880650fd200) The buggy address belongs to the page: page:ffffea0001943f00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff8880650ff800 head:ffffea0001943f00 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 ffffea0001a06a08 ffffea00010ad308 ffff88806c402500 raw: ffff8880650ff800 0000000000100009 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880650fcf00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8880650fcf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880650fd000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880650fd080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880650fd100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 3c5584bf ("devlink: Rework devlink health reporter destructor") Fixes: 15c724b9 ("devlink: Add devlink health port reporters API") Signed-off-by:Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Moshe Shemesh <moshe@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Bartosz Golaszewski authored
PHYLIB is not selected by mdio-mscc-miim but it uses mdio devres helpers. Explicitly select MDIO_DEVRES in this driver's Kconfig entry. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 1814cff2 ("net: phy: add a Kconfig option for mdio_devres") Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Wei Yongjun authored
The sparse tool complains as follows: net/core/dev.c:5594:1: warning: symbol '__pcpu_scope_flush_works' was not declared. Should it be static? 'flush_works' is not used outside of dev.c, so marks it static. Fixes: 41852497 ("net: batch calls to flush_all_backlogs()") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== mlxsw: Add support for buffer drops mirroring This set offloads the recently introduced qevent infrastructure in TC and allows mlxsw to support mirroring of packets that were dropped due to buffer related reasons (e.g., early drops) during forwarding. Up until now mlxsw only supported mirroring that was either triggered by per-port triggers (i.e., via matchall) or by the policy engine (i.e., via flower). Packets that are dropped due to buffer related reasons are mirrored using a third type of trigger, a global trigger. Global triggers are bound once to a mirroring (SPAN) agent and enabled on a per-{port, TC} basis. This allows users, for example, to request that only packets that were early dropped on a specific netdev to be mirrored. Patch set overview: Patch #1 extends flow_block_offload and indirect offload structure to pass a scheduler instead of a netdevice. That is necessary, because binding type and netdevice are not a unique identifier of the block anymore. Patches #2-#3 add the required registers to support above mentioned functionality. Patches #4-#6 gradually add support for global mirroring triggers. Patch #7 adds support for enablement of global mirroring triggers. Patches #8-#11 are cleanups in the flow offload code and shuffle some code around to make the qevent offload easier. Patch #12 implements offload of RED early_drop qevent. Patch #13 extends the RED selftest for offloaded datapath to cover early_drop qevent. v2: - Patch #1: - In struct flow_block_indr, track both sch and dev. ==================== Signed-off-by: -
Petr Machata authored
Add a selftest for offloading a mirror action attached to the block associated with RED early_drop qevent. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Petr Machata authored
The RED qevents early_drop and mark can be offloaded under the following fairly strict conditions: - At most one filter is configured at the qevent block - The protocol is "any" - The classifier is matchall - The action is trap, sample, or mirror with the same conditions as with other SPAN offloads - The hw_counters type is none In this patchset, implement offload of mirror for early_drop qevent. The ECN trigger is currently not implemented in the FW and therefore the mark qevent is not supported. The qevent notifications look exactly like regular block binding notifications with a binder type that identifies them as qevents. Therefore the details of processing this binding are fairly similar to the matchall offload. struct flow_block_offload.sch points at the qdisc in question. Use it to figure out if the qdisc is offloaded at all and what TC it configures. Bounce bindings on not-offloaded qdiscs. Individual bindings are kept in a list so that several qevents can share the same block and all binding points get configured as the configured filters change. Signed-off-by:
-
Petr Machata authored
Two RED qevents have been introduced recently. From the point of view of a driver, qevents are simply blocks with unusual binder types. However they need to be handled by different logic than ACL-like flows. Thus rename mlxsw_sp_setup_tc_block() to mlxsw_sp_setup_tc_block_clsact() and move the binder-type dispatch from there to spectrum.c into a new function of the original name. The new dispatcher is easier to extend with new binder types. Signed-off-by:
-
Petr Machata authored
A following patch introduces offloading of filters attached to blocks bound to the RED tail_drop qevent. The only classifier that mlxsw will permit in this role is matchall. mlxsw currently offloads matchall filters used with clsact qdisc. The data structures used for that offload will come handy for the qevent offload as well. Publish them in spectrum.h. Signed-off-by:
-
Petr Machata authored
The field "dev" in struct mlxsw_sp_flow_block_binding is not used. Drop it. Signed-off-by:
-
Petr Machata authored
No clean-up is performed at the target label of this goto. Convert it to a direct return. Signed-off-by:
-
Ido Schimmel authored
While the binding of global mirroring triggers to a SPAN agent is global, packets are only mirrored if they belong to a port and TC on which the trigger was enabled. This allows, for example, to mirror packets that were tail-dropped on a specific netdev. Implement the operations that allow to enable / disable a global mirroring trigger on a specific port and TC. Signed-off-by:
-
Ido Schimmel authored
Global mirroring triggers are triggers that are only keyed by their trigger, as opposed to per-port triggers, which are keyed by their trigger and port. Such triggers allow mirroring packets that were tail/early dropped or ECN marked to a SPAN agent. Implement the previously added trigger operations for these global triggers. Since such triggers are only supported from Spectrum-2 onwards, have the Spectrum-1 operations return an error. Signed-off-by:
-
Ido Schimmel authored
Currently, a SPAN agent can only be bound to a per-port trigger where the trigger is either an incoming packet (INGRESS) or an outgoing packet (EGRESS) to / from the port. The subsequent patch will introduce the concept of global mirroring triggers. The binding / unbinding of global triggers is different than that of per-port triggers. Such triggers also need to be enabled / disabled on a per-{port, TC} basis and are only supported from Spectrum-2 onwards. Add trigger operations that allow us to abstract these differences. Only implement the operations for per-port triggers. Next patch will implement the operations for global triggers. Signed-off-by: -
Ido Schimmel authored
The per-ASIC SPAN operations are relevant to the SPAN module and therefore should be implemented there and not in the main driver file. Move them. These operations will be extended later on. Signed-off-by:
-
Amit Cohen authored
This register is used for global port analyzer configurations. Signed-off-by:
Amit Cohen <amitc@mellanox.com> Reviewed-by:
-
Amit Cohen authored
This register is used to configure the mirror enable for different mirror reasons. Signed-off-by:
-
Petr Machata authored
Previously, shared blocks were only relevant for the pseudo-qdiscs ingress and clsact. Recently, a qevent facility was introduced, which allows to bind blocks to well-defined slots of a qdisc instance. RED in particular got two qevents: early_drop and mark. Drivers that wish to offload these blocks will be sent the usual notification, and need to know which qdisc it is related to. To that end, extend flow_block_offload with a "sch" pointer, and initialize as appropriate. This prompts changes in the indirect block facility, which now tracks the scheduler in addition to the netdevice. Update signatures of several functions similarly. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== net simple kerneldoc fixes This is a collection of simple kerneldoc fixes. They are all low hanging fruit, were not real understanding of the code was needed. ==================== Signed-off-by: -
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Andrew Lunn authored
Fix the warning "Function parameter or member 'inode' not described in '__sock_release'' due to the kerneldoc being placed before __sock_release() not sock_release(), which does not take an inode parameter. Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Paul Moore <paul@paul-moore.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
