- 22 Jul, 2007 4 commits
-
-
Al Viro authored
same scheme as for sparc64, same rationale Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Move stuff used only by arch/sparc/kernel/* into arch/sparc/kernel/irq.h and into individual files in there (e.g. macros internal to sun4m_irq.c, etc.) Signed-off-by:
-
Mark Fortescue authored
__ndelay and __udelay have not been delayung >= specified time. The problem with __ndelay has been tacked down to the rounding of the multiplier constant. By changing this, delays > app 18us are correctly calculated. The problem with __udelay has also been tracked down to rounding issues. Changing the multiplier constant (to match that used in sparc64) corrects for large delays and adding in a rounding constant corrects for trunctaion errors in the claculations. Many short delays will return without looping. This is not an error as there is the fixed delay of doing all the maths to calculate the loop count. Signed-off-by:
Mark Fortescue <mark@mtfhpc.demon.co.uk> Signed-off-by:
-
- 21 Jul, 2007 14 commits
-
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: fix section mismatch warning in mdesc.c [SPARC64]: fix section mismatch warning in pci_sunv4 [SPARC64]: Stop using drivers/char/rtc.c [SPARC64]: Convert parport to of_platform_driver. [SPARC]: Implement fb_is_primary_device(). [SPARC64]: Fix virq decomposition. [SPARC64]: Use KERN_ERR in IRQ manipulation error printks. [SPARC64]: Do not flood log with failed DS messages. [SPARC64]: Add proper multicast support to VNET driver. [SPARC64]: Handle multiple domain-services-port nodes properly. [SPARC64]: Improve VIO device naming further. [SPARC]: Make sure dev_archdata is filled in for all devices. [SPARC]: Define minimal struct dev_archdata, similarly to sparc64. [SPARC]: Fix serial console device detection.
-
Sam Ravnborg authored
Fix following warning: WARNING: vmlinux.o(.text+0x35264): Section mismatch: reference to .init.text:__alloc_bootmem (between 'mdesc_bootmem_alloc' and 'mdesc_bootmem_free') Rename mdesc_mem_ops to *_ops so modpost ignores __init references and declare mdesc_bootmem_alloc __init since it is only used during __init context. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Sam Ravnborg authored
Fix following warning: WARNING: vmlinux.o(.text+0x3cf50): Section mismatch: reference to .init.text:page_in_phys_avail (between 'pci_sun4v_pbm_init' and 'sun4v_pci_init') pci_sun4v_pbm_init and sun4v_pci_init was only used under __init context so declare them _init. Signed-off-by:
-
David S. Miller authored
The existing sparc64 mini_rtc driver can handle CMOS based rtcs trivially with just a few lines of code and the simplifies things tremendously. Tested on SB1500. Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
The dev_handle and dev_ino fields don't match up exactly to the traditional IMAP_IGN and IMAP_INO masks. So store them away in a table and look them up directly. Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
When booting up a control node it's quite common to not be able to register several service types. And likewise on guests at least one or two are going to not be there. Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
The best scheme to get uniqueness seems to be: FOO -- If node lacks "id" property FOO-$(ID) -- If node has "id" but parent lacks "cfg-handle" FOO-$(ID)-$(CFG_HANDLE) -- If node has both Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by:
-
- 20 Jul, 2007 22 commits
-
-
David S. Miller authored
The current scheme works on static interpretation of text names, which is wrong. The output-device setting, for example, must be resolved via an alias or similar to a full path name to the console device. Paths also contain an optional set of 'options', which starts with a colon at the end of the path. The option area is used to specify which of two serial ports ('a' or 'b') the path refers to when a device node drives multiple ports. 'a' is assumed if the option specification is missing. This was caught by the UltraSPARC-T1 simulator. The 'output-device' property was set to 'ttya' and we didn't pick upon the fact that this is an OBP alias set to '/virtual-devices/console'. Instead we saw it as the first serial console device, instead of the hypervisor console. The infrastructure is now there to take advantage of this to resolve the console correctly even in multi-head situations in fbcon too. Thanks to Greg Onufer for the bug report. Signed-off-by: -
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (5880): wm8775/wm8739: Fix memory leak when unloading module V4L/DVB (5877): radio-gemtek-pci: remove unused structure member V4L/DVB (5871): Conexant 2388x: check for kthread_run V4L/DVB (5869): Add check for valid control ID to v4l2_ctrl_next. V4L/DVB (5867): videodev2.h: add missing <sys/time.h> for userspace V4L/DVB (5866): ivtv: fix DMA timeout when capturing VBI + another stream V4L/DVB (5865): Remove usage of HZ on ivtv driver, replacing by msecs_to_jiffies V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134 V4L/DVB (5860): Use msecs_to_jiffies instead of HZ on some webcam drivers V4L/DVB (5859): use msecs_to_jiffies on InfraRed RC5 timeout V4L/DVB (5858): Use msecs_to_jiffies instead of HZ on media/video I2C drivers V4L/DVB (5857): Use msecs_to_jiffies instead of HZ on radio drivers V4L/DVB (5855): ivtv: fix Kconfig typo and refer to the driver homepage. V4L/DVB (5854): ivtv: cleanup of driver messages V4L/DVB (5853): ivtv: add support to suppress high volume i2c debug messages. V4L/DVB (5852): ivtv: don't recompile needlessly V4L/DVB (5851): ivtv: fix missing I2C_ALGOBIT config option V4L/DVB (5850): ivtv: improve API command debugging V4L/DVB (5848): Av7110: fix typo
-
Linus Torvalds authored
We ignore all the generated files called "vmlinux*" from the top-level gitignore, but that also ends up catching a few files that we track, and that people do edit. Notably the "vmlinux.lds.S" file, that each architecture has. You can always use "git add -f" to override the ignore file, but we might as well just make it explicit for this file. Bitten-by-and-tested-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6: (37 commits) [CELL] spufs: rework list management and associated locking [CELL] oprofile: add support to OProfile for profiling CELL BE SPUs [CELL] oprofile: enable SPU switch notification to detect currently active SPU tasks [CELL] spu_base: locking cleanup [CELL] cell: indexing of SPUs based on firmware vicinity properties [CELL] spufs: integration of SPE affinity with the scheduller [CELL] cell: add placement computation for scheduling of affinity contexts [CELL] spufs: extension of spu_create to support affinity definition [CELL] cell: add hardcoded spu vicinity information for QS20 [CELL] cell: add vicinity information on spus [CELL] cell: add per BE structure with info about its SPUs [CELL] spufs: use find_first_bit() instead of sched_find_first_bit() [CELL] spufs: remove unused file argument from spufs_run_spu() [CELL] spufs: change decrementer restore timing [CELL] spufs: dont halt decrementer at restore step 47 [CELL] spufs: limit saving MFC_CNTL bits [CELL] spufs: fix read and write for decr_status file [CELL] spufs: fix decr_status meanings [CELL] spufs: remove needless context save/restore code [CELL] spufs: fix array size of channel index ...
-
Hans Verkuil authored
State struct was never freed. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Trent Piepho authored
The drivers reads the PCI subsystem ID into its state structure, but it's never used anywhere. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Cyrill Gorcunov authored
The patch adds checking of kthread_run return code and issues a message if it fails. Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by:
-
Hans Verkuil authored
If v4l2_ctrl_next is called without the V4L2_CTRL_FLAG_NEXT_CTRL then it should check whether the passed control ID is valid and return 0 if it isn't. Otherwise a for-loop over the control IDs will never end. Signed-off-by:
-
Hans Verkuil authored
When videodev2.h is included by an application, it needs to include <sys/time.h> for the timeval struct. Signed-off-by:
-
Hans Verkuil authored
The VBI DMA is handled in a special way and is marked with a bit. However, that bit was set at the wrong time and could be cleared by mistake if a PCM (or other) DMA request would arrive before the VBI DMA was completed. So on completion of the VBI DMA the driver no longer knew that that DMA transfer was for VBI data. And this in turn caused havoc with the card's DMA engine. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Alexey Dobriyan authored
Driver prints banner including kernel version. Was a leftover from when the driver was standalone. Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by:
-
Hans Verkuil authored
I2C_ALGOBIT must also be selected when ivtv is selected. Signed-off-by:
-
Hans Verkuil authored
Turn off debugging of API commands that occur during encoding or decoding, unless they are explicitly requested. Signed-off-by:
-
