- 13 May, 2016 13 commits
-
-
Guy Levi authored
By this patch, the user space library will be able to improve performance using appropriate ringing DoorBell method according to the memory type it asked for. Currently only one mapping command is allowed for UARs: MLX5_IB_MMAP_REGULAR_PAGE. Using this mapping, the kernel maps the UARs to write-combining (WC) if the system supports it. If the system is not supporting WC the UARs are mapped to non-cached(NC). In this case the user space library can't tell which mapping is applied. This patch adds 2 new mapping commands: MLX5_IB_MMAP_WC_PAGE and MLX5_IB_MMAP_NC_PAGE. For these commands the kernel maps exactly as requested and fails if it can't. Since there is no generic way to check if the requested memory region can be mapped as WC, driver enables conclusive WC mapping only for x86, PowerPC and ARM which support WC for the device's memory region. Signed-off-by:
Guy Levy <guyle@mellanox.com> Signed-off-by:
Moshe Lazer <moshel@mellanox.com> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Matan Barak authored
The current mlx5 code disallows mapping the free running counter of mlx5 based hardwares when PROT_EXEC is set. Although this behaviour is correct, Linux does add an implicit VM_EXEC to the vm_flags if the READ_IMPLIES_EXEC bit is set in the process personality. This happens for example if the process stack is executable. This causes libmlx5 to output a warning and prevents the user from reading the free running clock. Executing the init segment of the hardware isn't a security risk (at least no more than executing a process own stack), so we just prevent writes to there. Fixes: d69e3bcf ('IB/mlx5: Mmap the HCA's core clock register to user-space') Signed-off-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
-
Geliang Tang authored
Simplify the code in search_relocate_mgid0_group with by using list_for_each_entry_safe(). Signed-off-by:
Geliang Tang <geliangtang@163.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Mark Bloch authored
Fixes a direct call to kfree_skb when nlmsg_free should be used. Fixes: 2ca546b9 ('IB/sa: Route SA pathrecord query through netlink') Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Mark Bloch authored
Fix array overrun when going over callback table. In declaration of callback table, the max size isn't provided and in registration phase, it is provided. There is potential scenario where a new operation is added and it is not supported by current client. The acceptance of such operation by ib_netlink will cause to array overrun. Fixes: 809d5fc9 ("infiniband: pass rdma_cm module to netlink_dump_start") Fixes: b493d91d ("iwcm: common code for port mapper") Fixes: 2ca546b9 ("IB/sa: Route SA pathrecord query through netlink") Signed-off-by:
-
Mark Bloch authored
RDMA_NL_GET_OP is defined like this: (type & ((1 << 10) - 1)) which means op (defined as an int) can never be a negative number. Fixes: b2cbae2c ('RDMA: Add netlink infrastructure') Signed-off-by:
-
Mark Bloch authored
In case ibnl_put_msg fails in send_nlmsg_done, the function returns with -ENOMEM without freeing. This patch fixes this behavior. Fixes: 30dc5e63 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by:
-
Andy Shevchenko authored
There is no need to duplicate a lot of code that is in the kernel library for ages. Replace duplicating code by calling to print_hex_dump() directly. Note that output is slightly changed: - hex and ascii parts have just two spaces delimeter - there is no delimeter for ascii portions - file and line removed from prefix (they were redundant anyway since previous output shows same closer enough) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by:
-
Colin Ian King authored
fix spelling mistake, argumant -> argument Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Denys Vlasenko authored
This function compiles to 550 bytes of machine code. Three callsites, all in nes_create_qp. Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> CC: Faisal Latif <faisal.latif@intel.com> CC: Doug Ledford <dledford@redhat.com> CC: linux-rdma@vger.kernel.org CC: linux-kernel@vger.kernel.org Reviewed-By:
-
Tatyana Nikolova authored
Adding sq and rq drain functions, which block until all previously posted wr-s in the specified queue have completed. A completion object is signaled to unblock the thread, when the last cqe for the corresponding queue is processed. Signed-off-by:
Faisal Latif <faisal.latif@intel.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Bart Van Assche authored
Avoid that sparse complains about the comparison of s_addr with INADDR_ANY. Signed-off-by:
-
Bart Van Assche authored
Avoid that the following BUG() is triggered against a debug kernel: kernel BUG at include/linux/scatterlist.h:92! RIP: 0010:[<ffffffffa0467199>] [<ffffffffa0467199>] srp_map_idb+0x199/0x1a0 [ib_srp] Call Trace: [<ffffffffa04685fa>] srp_map_data+0x84a/0x890 [ib_srp] [<ffffffffa0469674>] srp_queuecommand+0x1e4/0x610 [ib_srp] [<ffffffff813f5a5e>] scsi_dispatch_cmd+0x9e/0x180 [<ffffffff813f8b07>] scsi_request_fn+0x477/0x610 [<ffffffff81298ffe>] __blk_run_queue+0x2e/0x40 [<ffffffff81299070>] blk_delay_work+0x20/0x30 [<ffffffff81071f07>] process_one_work+0x197/0x480 [<ffffffff81072239>] worker_thread+0x49/0x490 [<ffffffff810787ea>] kthread+0xea/0x100 [<ffffffff8159b632>] ret_from_fork+0x22/0x40 Fixes: f7f7aab1 ("IB/srp: Convert to new registration API") Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
-
- 12 May, 2016 11 commits
-
-
Doug Ledford authored
-
Saeed Mahameed authored
Adding the needed mlx5_ifc hardware bits and structs for the following features: * Add vport to steering commands for SRIOV ACL support * Add mlcr, pcmr and mcia registers for dump module EEPROM * Add support for FCS, beacon led and disable_link bits to hca caps * Add CQE period mode bit in CQ context for CQE based CQ moderation support * Add umr SQ bit for fragmented memory registration * Add needed bits and caps for Striding RQ support In-order to avoid possible future conflicts between rdma and net-next we added all expected updates to this file for this release. If more changes will be submitted, we plan to do it only through one of the subsystems, probably net-next. All updated bits in this patch will be later used in the up-coming submissions to net-next and rdma trees. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
All reserved fields after early_vf_enable are off by 1, since early_vf_enable was not explicitly declared as array of size 1. Reserved field before cqe_zip had a wrong size, it should be 0x80 + 0x3f. Fixes: b0844444 ("net/mlx5_core: Introduce access function to read internal timer ") Fixes: b4ff3a36 ("net/mlx5: Use offset based reserved field names in the IFC header file") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
Signed-off-by:
Sagi Grimberg <sai@grimberg.m> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Bart Van Assche authored
Since all srp_map_finish_fr() callers pass a non-zero value as the fourth argument (sg_nents), the sg_nents == 0 check in that function can be removed. Add a count == 0 check in the caller of that function. Signed-off-by:
-
Bart Van Assche authored
The srp_queuecommand() function translates ENOMEM into QUEUE_FULL which causes the SCSI mid-layer to retry the command. All other error codes are translated into DID_ERROR which causes the SCSI command to fail. Return E2BIG if mapping will always fail to prevent that the SCSI mid-layer keeps resubmitting a command forever. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Ensure that req->nmdesc is set correctly in srp_map_sg() if mapping fails. Avoid that mapping failure causes a memory descriptor leak. Report srp_map_sg() failure to the caller. Signed-off-by:
-
Bart Van Assche authored
Signed-off-by:
-
Bart Van Assche authored
The free request list was removed through patch "IB/srp: Use block layer tags". Hence update a comment that refers to that free request list. Signed-off-by:
-
Bart Van Assche authored
Change one occurrence of "boundries" into "boundaries". Signed-off-by:
-
- 05 May, 2016 11 commits
-
-
Doug Ledford authored
-
Hariprasad S authored
Use c4iw_ep_disconnect() instead. This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. This is the last user of abort_connection(), so remove it too. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad S authored
In c4iw_ep_disconnect(), if we fail to initiate a close operation, then move the qp to ERROR to disassociate the ep from the qp. Failure to do this will leak the ep resources. Signed-off-by:
-
Hariprasad S authored
Instead return whether the caller needs to disconnect. This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. Signed-off-by:
-
Hariprasad S authored
Use c4iw_ep_disconnect() instead. This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. Signed-off-by:
-
Hariprasad S authored
Signed-off-by:
-
Hariprasad S authored
Instead, have the caller, rx_data() handle the close/abort like it does for process_mpa_request(). This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. Signed-off-by:
-
Hariprasad S authored
In rx_data(), with the ep in FPDU_MODE, refcnt=2, if we get unexpected streaming data, we call c4iw_modify_rc_qp() and move the qp from RTS -> TERMINATE. In c4iw_modify_rc_qp(), if rdma_fini() returns an error, the ep will be dereferenced (refcnt=1). Then rx_data() calls c4iw_ep_disconnect() which starts the close operation. But if send_halfclose() fails in c4iw_ep_disconnect(), we will call release_ep_resources() derefing the ep which reduces the refcnt to 0 and and frees the ep. However we still has the ep mutex at that point, so we have a touch-after-free bug. There is a similar issue where peer_close() calls c4iw_ep_disconnect(). The solution is to add a reference to the ep in c4iw_ep_disconnect() after acquiring the mutex, and release it after releasing the mutex. Signed-off-by:
-
Hariprasad S authored
In c4iw_ep_disconnect(), if we start the ep timer to begin a close, but send_halfclose() fails, we need to stop the timer and send a CLOSE event up to the IWCM before releasing the resources. Otherwise, we can crash when the ep timer fires if the ep is referencing a previous instance of the device. This can happen as part of adapter reset/recovery, for instance. Signed-off-by:
-
Hariprasad S authored
If ARP fails before the CPL_PASS_ACCEPT_RPL is seen by hardware, the tid will be stuck in SYN_PEND and never released. So create an arp failure handler specifically for this message to release the endpoint resources. In pass_accept_rpl_arp_failure(), put the parent endpoint so it will be freed when destroyed. Also we don't need to call release_tid() here because _c4iw_free_ep() calls cxgb4_remove_tid() which releases the hwtid. If we get an ABORT_REQ_RSS instead of a PASS_ESTABLISH (because the peer's ACK to our SYN is never received), then put the parent as well in peer_abort(). Treat accept_cr() failures just like arp failures: put the parent ep and release the ep resources destroying the tid The ARP failure handlers are called in an atomic context, so we need to schedule some of the processing which might block. Namely _c4iw_free_ep() which needs a mutex. So create a "special" CPL opcode and handler and schedule it via sched() to be run by process_work() in a blockable context. Also rework the active open arp failure handler to make use of release_ep_resources(). This allows both the active and passive arp failure handlers to use the same deferred cleanup function. Signed-off-by:
-
Christoph Hellwig authored
iSER currently has a couple places that set max_sectors in either the host template or SCSI host, and all of them get it wrong. This patch instead uses a single assignment that (hopefully) gets it right: the max_sectors value must be derived from the number of segments in the FR or FMR structure, but actually be one lower than the page size multiplied by the number of sectors, as it has to handle the case of non-aligned I/O. Without this I get trivial to reproduce hangs when running xfstests (on XFS) over iSER to Linux targets. Signed-off-by:
-
- 29 Apr, 2016 1 commit
-
-
Florian Westphal authored
Alternatively one could free the skb, OTOH I don't think this test is useful so just remove it. Cc: <linux-rdma@vger.kernel.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 28 Apr, 2016 4 commits
-
-
Tatyana Nikolova authored
Fix for removing a quad hash entry when the corresponding quad hash entry hasn't been added, which is the case in loopback connections Signed-off-by:
-
Tatyana Nikolova authored
Fix for checking if the QP associated with a completion has been destroyed while processing CQ elements. If that is the case, move the CQ head to the next element and continue completion processing. Signed-off-by:
-
Shiraz Saleem authored
A check is added to validate the requested sge number. iWARP doesn't support multiple sg elements for RDMA READ work requests. Signed-off-by:
-
Shiraz Saleem authored
Fix to calculate the SQ size based on the max frag_count, requested by the application instead of overwriting it with the max supported frag_count Signed-off-by:
-
