- 06 Jan, 2012 40 commits
-
-
Bjorn Helgaas authored
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. v2: fix up conversion CC: linux-alpha@vger.kernel.org Signed-off-by:
-
Bjorn Helgaas authored
Users of pci_scan_bus_parented() should be converted to use either pci_scan_root_bus() (preferred, but also calls pci_bus_add_devices) or pci_create_root_bus() pci_scan_child_bus() Since pci_scan_bus_parented(), I'm marking it deprecated now and will actually remove it later. Signed-off-by: -
Bjorn Helgaas authored
This converts pci_scan_bus_parented() to use pci_create_root_bus() instead of pci_create_bus(). The new bus still has the default (incorrect) resources, so this patch doesn't help fix that problem, but it does remove one more use of pci_create_bus(). Signed-off-by:
-
Bjorn Helgaas authored
I plan to deprecate pci_scan_bus_parented(), so use pci_create_root_bus() directly instead. pci_scan_bus() itself will be removed as soon as all callers are gone, so this is just an interim step. v2: export pci_scan_bus Signed-off-by:
-
Bjorn Helgaas authored
"Early" and "header" quirks often use incorrect bus resources because they see the default resources assigned by pci_create_bus(), before the architecture fixes them up (typically in pcibios_fixup_bus()). Regions reserved by these quirks end up with the wrong parents. Here's the standard path for scanning a PCI root bus: pci_scan_bus or pci_scan_bus_parented pci_create_bus <-- A create with default resources pci_scan_child_bus pci_scan_slot pci_scan_single_device pci_scan_device pci_setup_device pci_fixup_device(early) <-- B pci_device_add pci_fixup_device(header) <-- C pcibios_fixup_bus <-- D fill in correct resources Early and header quirks at B and C use the default (incorrect) root bus resources rather than those filled in at D. This patch adds a new pci_scan_root_bus() function that sets the bus resources correctly from a supplied list of resources. I intend to remove pci_scan_bus() and pci_scan_bus_parented() after fixing all callers. Signed-off-by: -
Bjorn Helgaas authored
pci_create_bus() assigns ioport_resource and iomem_resource as the default bus resources, i.e., the entire address space. Architectures fix these later, typically in pcibios_fixup_bus() or after pci_scan_bus_parented() returns, but code that runs in the interim sees incorrect resource information. This patch adds a new pci_create_root_bus() that sets the bus resources correctly from a supplied list of resources. I intend to remove pci_create_bus() after changing all callers. Based on original patch by Deng-Cheng Zhu. Reference: http://www.spinics.net/lists/mips/msg41654.html Reference: https://lkml.org/lkml/2011/8/26/88Signed-off-by:
Deng-Cheng Zhu <dczhu@mips.com> Signed-off-by:
-
Bjorn Helgaas authored
Show the bus number and resources for every root bus we create. This will become more interesting when we supply the correct resources instead of using the defaults (ioport_resource and iomem_resource). Signed-off-by:
-
Bjorn Helgaas authored
We'd like to supply a list of resources when we create a new PCI bus, e.g., the root bus under a PCI host bridge. These are helpers for constructing that list. These are exported because the plan is to replace this exported interface: pci_scan_bus_parented() with this one: pci_add_resource(resources, ...) pci_scan_root_bus(..., resources) Signed-off-by: -
Ram Pai authored
The SRIOV capability, namely page size and total_vfs of a device are configured during enumeration phase of the device. This can potentially interfere with the PCI operations of the platform, if the IOV capability of the device is not enabled. The following patch postpones the configuration of the IOV capability of the device to a later point, when the IOV capability is explicitly enabled by the device driver. The patch is tested on x86 and power platform. Tested-by:
Donald Dutile <ddutile@redhat.com> Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
-
Yinghai Lu authored
During debugging pcie hotplug with SRIOV with pcie switch, I found pci_stop_bus_device() is called several times for some child devices. So change original pci_remove_bus_device() to __pci_remove_bus_device(), and make it only do remove work, and add a new pci_remove_bus_device that calls pci_stop_bus_device() one time, and then call __pci_remove_bus_device(). Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Andreas Herrmann authored
Commit 24d9b70b (x86: Use PCI method for enabling AMD extended config space before MSR method) added a message when IO access to PCI ECS was enabled via access to the NB_CFG PCI register. This can lead to a bogus message like [ 0.365177] Extended Config Space enabled on 0 nodes which is misleading because IO ECS access is subsequently enabled for AMD CPUs (that support this) by modifying the corresponding NB_CFG MSR. Furthermore it's not "Extended Config Space" that is enabled by this register setting. It's the IO access that is enabled for extended configruation space. IMHO the ambiguous message needs to be cancelled. Cc: Jan Beulich <jbeulich@novell.com> Cc: Robert Richter <robert.richter@amd.com> Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by:
-
Myron Stowe authored
The latency timer is read-only and hardwired to zero for all PCIe devices, both Type 0 and Type 1, so don't bother trying to update it and cluttering the dmesg log with meaningless "setting latency timer to 64" messages. Signed-off-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
-
Myron Stowe authored
This patch removes x86's architecture-specific 'pcibios_set_master()' routine and lets the default PCI core based implementation handle PCI device 'latency timer' setup. No functional change. Signed-off-by:
-
Myron Stowe authored
This patch removes sh's architecture-specific 'pcibios_set_master()' routine and lets the default PCI core based implementation handle PCI device 'latency timer' setup. No functional change. Signed-off-by:
-
Myron Stowe authored
This patch removes mn10300's architecture-specific 'pcibios_set_master()' routine for ASB2305 and lets the default PCI core based implementation handle PCI device 'latency timer' setup. No functional change. Signed-off-by:
-
Myron Stowe authored
This patch removes MIPS' architecture-specific 'pcibios_set_master()' routine and lets the default PCI core based implementation handle PCI device 'latency timer' setup. No functional change. Acked-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Myron Stowe authored
This patch removes frv's architecture-specific 'pcibios_set_master()' routine and lets the default PCI core based implementation handle PCI device 'latency timer' setup. No functional change. Signed-off-by:
-
Myron Stowe authored
The 'latency timer' of PCI devices, both Type 0 and Type 1, is setup in architecture-specific code [see: 'pcibios_set_master()']. There are two approaches being taken by all the architectures - check if the 'latency timer' is currently set between 16 and 255 and if not bring it within bounds, or, do nothing (and then there is the gratuitously different PA-RISC implementation). There is nothing architecture-specific about PCI's 'latency timer' so this patch pulls its setup functionality up into the PCI core by creating a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over-ridden by architecture-specific code. No functional change. Signed-off-by:
-
Myron Stowe authored
This patch converts Xtensa's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow Xtensa's 'pcibios_set_master()' implementation to remain architecture-specific after the generic version is introduced and thus, not change current behavior. No functional change. Signed-off-by:
-
Myron Stowe authored
This patch converts UniCore's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow UniCore's 'pcibios_set_master()' implementation to remain architecture-specific after the generic version is introduced and thus, not change current behavior. No functional change. Signed-off-by:
-
Myron Stowe authored
This patch converts TILE's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over-ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow TILE's 'pcibios_set_master()' implementation to remain architecture-specific after the generic version is introduced and thus, not change current behavior. No functional change. Acked-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Myron Stowe authored
This patch converts SPARC's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow SPARC's 'pcibios_set_master()' implementation to remain architecture-specific after the generic version is introduced and thus, not change current behavior. No functional change. Signed-off-by:
-
Myron Stowe authored
This patch converts PowerPC's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow PowerPC's 'pcibios_set_master()' implementation to remain architecture-specific after the generic version is introduced and thus, not change current behavior. No functional change. Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Myron Stowe authored
This patch converts MicroBlaze's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow MicroBlaze's 'pcibios_set_master()' implementation to remain architecture-specific after the generic version is introduced and thus, not change current behavior. No functional change. Signed-off-by:
-
Myron Stowe authored
This patch converts IA64's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over-ridden by architecture- specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow IA64's 'pcibios_set_master()' implementation to remain architecture- specific after the generic version is introduced and thus, not change current behavior. No functional change. Signed-off-by:
-
Myron Stowe authored
This patch converts ARM's architecture-specific inlined 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow ARM's 'pcibios_set_master()' implementation to remain architecture- specific after the generic version is introduced and thus, not change current behavior. Note that ARM also has a non-inlined 'pcibios_set_master()' that is used if CONFIG_PCI_HOST_ITE8152 is defined. This patch does not change any behavior here either. No functional change. Signed-off-by:
-
Myron Stowe authored
Currently, pcibios_set_master() is implemented in architecture- specific code. There is nothing architecture-specific about PCI's 'latency timer'. This patch adds a declaration for pcibios_set_master() to PCI's core in preperation for pulling the function itself up into the core. Without the addition of this declaration, subsequent patches that remove inline definitions of pcibios_set_master() would be removing the only declaration of such. No functional change. Signed-off-by:
-
Jan Kiszka authored
The new PCI API provides both generic probing for 2.3 masking support and check&mask in the interrupt handler. Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Jan Kiszka authored
These new PCI services allow to probe for 2.3-compliant INTx masking support and then use the feature from PCI interrupt handlers. The services are properly synchronized with concurrent config space access via sysfs or on device reset. This enables generic PCI device drivers like uio_pci_generic or KVM's device assignment to implement the necessary kernel-side IRQ handling without any knowledge about device-specific interrupt status and control registers. Acked-by:
-
Jan Kiszka authored
pci_block_user_cfg_access was designed for the use case that a single context, the IPR driver, temporarily delays user space accesses to the config space via sysfs. This assumption became invalid by the time pci_dev_reset was added as locking instance. Today, if you run two loops in parallel that reset the same device via sysfs, you end up with a kernel BUG as pci_block_user_cfg_access detect the broken assumption. This reworks the pci_block_user_cfg_access to a sleeping service pci_cfg_access_lock and an atomic-compatible variant called pci_cfg_access_trylock. The former not only blocks user space access as before but also waits if access was already locked. The latter service just returns false in this case, allowing the caller to resolve the conflict instead of raising a BUG. Adaptions of the ipr driver were originally written by Brian King. Acked-by:
Brian King <brking@linux.vnet.ibm.com> Acked-by:
-
Gary Hade authored
This assures that a _CRS reserved host bridge window or window region is not used if it is not addressable by the CPU. The new code either trims the window to exclude the non-addressable portion or totally ignores the window if the entire window is non-addressable. The current code has been shown to be problematic with 32-bit non-PAE kernels on systems where _CRS reserves resources above 4GB. Signed-off-by:
Gary Hade <garyhade@us.ibm.com> Reviewed-by:
-
Alex Williamson authored
Spec shows this as 1010b = 0xa Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Zac Storer authored
Fixed a brace coding style issue. Signed-off-by:
Zac Storer <zac.3.14159@gmail.com> Signed-off-by:
-
David Fries authored
Include the driver name and device in warning when a pci driver supports both legacy pm and new framework as just the stack trace gives no way to identify the driver. Signed-off-by:
David Fries <David@Fries.net> Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Eric W. Biederman authored
I traced a nasty kexec on panic boot failure to the fact that we had screaming msi interrupts and we were not disabling the msi messages at kernel startup. The booting kernel had not enabled those interupts so was not prepared to handle them. I can see no reason why we would ever want to leave the msi interrupts enabled at boot if something else has enabled those interrupts. The pci spec specifies that msi interrupts should be off by default. Drivers are expected to enable the msi interrupts if they want to use them. Our interrupt handling code reprograms the interrupt handlers at boot and will not be be able to do anything useful with an unexpected interrupt. This patch applies cleanly all of the way back to 2.6.32 where I noticed the problem. Cc: stable@kernel.org Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Rafael J. Wysocki authored
Modify pci_acpi_wake_dev() to avoid resuming PME-capable devices whose PME Status bits are not set, which may happen currently if several devices are associated with the same wakeup GPE and all of them are notified whenever at least one of them signals PME. Signed-off-by:
-
Kenji Kaneshige authored
Use non-ordered workqueue for attention button events. Attention button events on each slot can be handled asynchronously. So we should use non-ordered workqueue. This patch also removes ordered workqueue in pciehp as a result. Signed-off-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Kenji Kaneshige authored
Fix improper workqueue cleanup. In the current pciehp, pcied_cleanup() calls destroy_workqueue() before calling pcie_port_service_unregister(). This causes kernel oops because flush_workqueue() is called in the pcie_port_service_unregister() code path after the workqueue was destroyed. So pcied_cleanup() must call pcie_port_service_unregister() first before calling destroy_workqueue(). Signed-off-by:
-
Matthew Garrett authored
Right now we forcibly clear ASPM state on all devices if the BIOS indicates that the feature isn't supported. Based on the Microsoft presentation "PCI Express In Depth for Windows Vista and Beyond", I'm starting to think that this may be an error. The implication is that unless the platform grants full control via _OSC, Windows will not touch any PCIe features - including ASPM. In that case clearing ASPM state would be an error unless the platform has granted us that control. This patch reworks the ASPM disabling code such that the actual clearing of state is triggered by a successful handoff of PCIe control to the OS. The general ASPM code undergoes some changes in order to ensure that the ability to clear the bits isn't overridden by ASPM having already been disabled. Further, this theoretically now allows for situations where only a subset of PCIe roots hand over control, leaving the others in the BIOS state. It's difficult to know for sure that this is the right thing to do - there's zero public documentation on the interaction between all of these components. But enough vendors enable ASPM on platforms and then set this bit that it seems likely that they're expecting the OS to leave them alone. Measured to save around 5W on an idle Thinkpad X220. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
