- 11 Jun, 2014 35 commits
-
-
Anjali Singhai Jain authored
A drop action comes down as a ring_cookie value, so allow it as a special value that can be used to configure destination control. Also fix the output to filter read command accordingly. Change-ID: I9956723cee42f3194885403317dd21ed4a151144 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
Add members to stat struct to keep track of Flow director ATR and SideBand filter packet matches. Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
This change drops the FTYPE field from the Rx descriptor, to match the hardware implementation. Change-ID: I66d31d2b43861da45e8ace4fb03df033abe88bab Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
FW can indicate any admin queue error states to the driver via some bits in the length registers. Each time we process an admin queue message, check these bits and log any errors we find. Since the VF really can't do much, we just print the message and depend on the PF driver to clear things up on our behalf. Change-ID: I92bc6c53ce3b4400544e0ca19c5de2d27490bd0d Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Linux gives us a function to copy Ethernet MAC addresses, let's use it. Change-ID: I0c861900029ca5ea65a53ca39565852fb633f6fd Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Remove the filter created by the firmware with the default MAC address it reads out of the NVM storage and a promiscuous VLAN tag and replace it with a filter that will not accept tagged packets by default. The system must request a VLAN tag packet filter to get packets with that tag. Change-ID: I119e6c3603a039bd68282ba31bf26f33a575490a Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Neerav Parikh authored
Currently if the firmware reports DCB capability the driver enables I40E_FLAG_DCB_ENABLED flag. When this flag is enabled the driver inserts a tag when transmitting a packet from the port even if there are no DCB traffic classes configured at the port. This patch adds a new flag I40E_FLAG_DCB_CAPABLE that will be set when the DCB capability is present and the existing flag I40E_FLAG_DCB_ENABLED will be set only if there are more than one traffic classes configured at the port. Change-ID: I24ccbf53ef293db2eba80c8a9772acf729795bd5 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
If the device is down, there's no place to go but up, so don't try to go down even more. This prevents a CPU soft lock in napi_disable(). Change-ID: I8b058b9ee974dfa01c212fae2597f4f54b333314 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
In XL710 devices we program FD filter's fields from Tx perspective of the flow. However the user interface exposed in ethtool should be compliant with the previous generation of drivers where a filter src and dst field are from the RX perspective. This patch changes the ethtool interface in this regard to match the other drivers. Change-ID: Iec6ccddd87357c4fb53ccf33aa0fae699faf70cf Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Add set_pf_context, replace set_phy_reset with set_phy_debug, add nvm_config_read/write, remove nvm_read/write_reg_se and add some PHY types. With these changes we bump the API version to 1.2. Change-ID: I4dc3aec175c2316f66fc9b726b3f7d594699d84e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Ashish Shah authored
Set appropriate fields in Tx queue configuration virtchnl message to pf to enable headwb and setup headwb addr. Then use that info from the VF to set headwb and headwb_addr instead of always enabling them. Change-ID: I7d393d1b2b07f0f3355b3a4f7c2d3c6ee3b0d622 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
This patch separates the hardware logic from the set function, so that we can re-use it during a ptp_reset. This enables the reset to return functionality to the last known timestamp mode, rather than resetting the value. We initialize the mode to off during the ptp_init cycle. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Todd Fujinaka authored
Return a 0 directly rather than a constant. Reported-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Ben Hutchings authored
Use dma_addr_t for DMA address parameters and u32 for shared memory offset parameters. Do not assume that dma_addr_t is the same as unsigned long; it will not be in PAE configurations. Truncate DMA addresses to 32 bits when printing them. This is OK because the DMA mask for this device is 32-bit (per default). Also rename the DMA address parameters from 'skb' to 'dma'. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Or Gerlitz says: ==================== mlx4 SRIOV fixes The patch from Wei Yang is a designed fix to a regression introduced by earlier commit of him. Jack added a fix to the resource management which we got from IBM. Let's get that into 3.16-rc1 1st and later see to what stable version/s this should go. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yang authored
Following commit befdf897 "net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()", there are two mlx4 pci callbacks which will attempt to release the mlx4_priv object -- .shutdown and .remove. This leads to a use-after-free access to the already freed mlx4_priv instance and trigger a "Kernel access of bad area" crash when both .shutdown and .remove are called. During reboot or kexec, .shutdown is called, with the VFs probed to the host going through shutdown first and then the PF. Later, the PF will trigger VFs' .remove since VFs still have driver attached. Fix that by keeping only one driver entry which releases mlx4_priv. Fixes: befdf897 ('net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()') CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
The Hypervisor driver tracks free slots and reserved slots at the global level and tracks allocated slots and guaranteed slots per VF. Guaranteed slots are treated as reserved by the driver, so the total reserved slots is the sum of all guaranteed slots over all the VFs. As VFs allocate resources, free (global) is decremented and allocated (per VF) is incremented for those resources. However, reserved (global) is never changed. This means that effectively, when a VF allocates a resource from its guaranteed pool, it is actually reducing that resource's free pool (since the global reserved count was not also reduced). The fix for this problem is the following: For each resource, as long as a VF's allocated count is <= its guaranteed number, when allocating for that VF, the reserved count (global) should be reduced by the allocation as well. When the global reserved count reaches zero, the remaining global free count is still accessible as the free pool for that resource. When the VF frees resources, the reverse happens: the global reserved count for a resource is incremented only once the VFs allocated number falls below its guaranteed number. This fix was developed by Rick Kready <kready@us.ibm.com> Reported-by: Rick Kready <kready@us.ibm.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rickard Strandqvist authored
Logical conjunction always evaluates to false: minor < 2 && minor > 1 I guess what you wanted is rather: minor > 2 || minor < 1 This was partly found using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rickard Strandqvist authored
A check on a memory allocation is checked incorrectly. This was partly found using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
françois romieu authored
Fix following compilation warning: [...] CC drivers/net/phy/amd-xgbe-phy.o drivers/net/phy/amd-xgbe-phy.c:1353:30: warning: ‘amd_xgbe_phy_ids’ defined but not used [-Wunused-variable] static struct mdio_device_id amd_xgbe_phy_ids[] = { ^ Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
- 'struct nlattr' must be 2 byte aligned - provide big-endian input data for nlattr/nlattr_nest tests Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
The macro 'A' used in internal BPF interpreter: #define A regs[insn->a_reg] was easily confused with the name of classic BPF register 'A', since 'A' would mean two different things depending on context. This patch is trying to clean up the naming and clarify its usage in the following way: - A and X are names of two classic BPF registers - BPF_REG_A denotes internal BPF register R0 used to map classic register A in internal BPF programs generated from classic - BPF_REG_X denotes internal BPF register R7 used to map classic register X in internal BPF programs generated from classic - internal BPF instruction format: struct sock_filter_int { __u8 code; /* opcode */ __u8 dst_reg:4; /* dest register */ __u8 src_reg:4; /* source register */ __s16 off; /* signed offset */ __s32 imm; /* signed immediate constant */ }; - BPF_X/BPF_K is 1 bit used to encode source operand of instruction In classic: BPF_X - means use register X as source operand BPF_K - means use 32-bit immediate as source operand In internal: BPF_X - means use 'src_reg' register as source operand BPF_K - means use 32-bit immediate as source operand Suggested-by: Chema Gonzalez <chema@google.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Chema Gonzalez <chema@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Linus Lüssing says: ==================== bridge: multicast snooping patches / exports The first patch is simply a cosmetic patch. So far I (and maybe others too?) have been regularly confusing these two structs, therefore I'd suggest renaming them and therefore making the follow-up patches easier to understand and nicer to fit in. The second patch fixes a minor issue, but probably not worth for stable. On the other hand the first two patches are also preparations for the third and fourth patch: These two patches are exporting functionality needed to marry the bridge multicast snooping with the batman-adv multicast optimizations recently added for the 3.15 kernel, allowing to use these optimzations in common setups having a bridge on top of e.g. bat0, too. So far these bridged setups would fall back to simple flooding through the batman-adv mesh network for any multicast packet entering bat0. More information about the batman-adv multicast optimizations currently implemented can be found here: http://www.open-mesh.org/projects/batman-adv/wiki/Basic-multicast-optimizations The integration on the batman-adv side could afterwards look like this, for instance: http://git.open-mesh.org/batman-adv.git/commitdiff/576b59dd3e34737c702e548b21fa72059262f796?hp=f95ce7131746c65fbcdffcf2089cab59e2c2f7ac ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
Adding bridge support to the batman-adv multicast optimization requires batman-adv knowing about the existence of bridged-in IGMP/MLD queriers to be able to reliably serve any multicast listener behind this same bridge. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
With this new, exported function br_multicast_list_adjacent(net_dev) a list of IPv4/6 addresses is returned. This list contains all multicast addresses sensed by the bridge multicast snooping feature on all bridge ports of the bridge interface of net_dev, excluding addresses from the specified net_device itself. Adding bridge support to the batman-adv multicast optimization requires batman-adv knowing about the existence of bridged-in multicast listeners to be able to reliably serve them with multicast packets. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
MLDv1 (RFC2710 section 6), MLDv2 (RFC3810 section 7.6.2), IGMPv2 (RFC2236 section 3) and IGMPv3 (RFC3376 section 6.6.2) specify that the querier with lowest source address shall become the selected querier. So far the bridge stopped its querier as soon as it heard another querier regardless of its source address. This results in the "wrong" querier potentially becoming the active querier or a potential, unnecessary querying delay. With this patch the bridge memorizes the source address of the currently selected querier and ignores queries from queriers with a higher source address than the currently selected one. This slight optimization is supposed to make it more RFC compliant (but is rather uncritical and therefore probably not necessary to be queued for stable kernels). Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
The current naming of these two structs is very random, in that reversing their naming would not make any semantical difference. This patch tries to make the naming less confusing by giving them a more specific, distinguishable naming. This is also useful for the upcoming patches reintroducing the "struct bridge_mcast_querier" but for storing information about the selected querier (no matter if our own or a foreign querier). Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hariprasad Shenai says: ==================== Adds support for CIQ and other misc. fixes for rdma/cxgb4 This patch series adds support to allocate and use IQs specifically for indirect interrupts, adds fixes to align ISS for iWARP connections & fixes related to tcp snd/rvd window for Chelsio T4/T5 adapters on iw_cxgb4. Also changes Interrupt Holdoff Packet Count threshold of response queues for cxgb4 driver. The patches series is created against 'net-next' tree. And includes patches on cxgb4 and iw_cxgb4 driver. Since this patch-series contains cxgb4 and iw_cxgb4 patches, we would like to request this patch series to get merged via David Miller's 'net-next' tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Fixed a bug that shows up with recv window sizes that exceed the size of the RCV_BUFSIZ field in opt0 (>= 1024K). If the recv window exceeds this, then we specify the max possible in opt0, add add the rest in via a RX_DATA_ACK credits. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Select the appropriate hw mtu index and initial sequence number to optimize hw memory performance. Add new cxgb4_best_aligned_mtu() which allows callers to provide enough information to be used to [possibly] select an MTU which will result in the TCP Data Segment Size (AKA Maximum Segment Size) to be an aligned value. If an RTR message exhange is required, then align the ISS to 8B - 1 + 4, so that after the SYN the send seqno will align on a 4B boundary. The RTR message exchange will leave the send seqno aligned on an 8B boundary. If an RTR is not required, then align the ISS to 8B - 1. The goal is to have the send seqno be 8B aligned when we send the first FPDU. Based on original work by Casey Leedom <leeedom@chelsio.com> and Steve Wise <swise@opengridcomputing.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Currently indirect interrupts for RDMA CQs funnel through the LLD's RDMA RXQs, which also handle direct interrupts for offload CPLs during RDMA connection setup/teardown. The intended T4 usage model, however, is to have indirect interrupts flow through dedicated IQs. IE not to mix indirect interrupts with CPL messages in an IQ. This patch adds the concept of RDMA concentrator IQs, or CIQs, setup and maintained by the LLD and exported to iw_cxgb4 for use when creating CQs. RDMA CPLs will flow through the LLD's RDMA RXQs, and CQ interrupts flow through the CIQs. Design: cxgb4 creates and exports an array of CIQs for the RDMA ULD. These IQs are sized according to the max available CQs available at adapter init. In addition, these IQs don't need FL buffers since they only service indirect interrupts. One CIQ is setup per RX channel similar to the RDMA RXQs. iw_cxgb4 will utilize these CIQs based on the vector value passed into create_cq(). The num_comp_vectors advertised by iw_cxgb4 will be the number of CIQs configured, and thus the vector value will be the index into the array of CIQs. Based on original work by Steve Wise <swise@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
There is no need to require forcing device down on a Ethernet GRE (gretap) tunnel to change the MAC address. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Octavian Purdila authored
tcp_fragment can be called from process context (from tso_fragment). Add a new gfp parameter to allow it to preserve atomic memory if possible. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-06-09 This series contains more updates to i40e and i40evf. Shannon adds checks for error status bits on the admin event queue and provides notification if seen. Cleans up unused variable and memory allocation which was used earlier in driver development and is no longer needed. Also fixes the driver to not complain about removing non-existent MAC addresses. Bumps the driver versions for both i40e and i40evf. Catherine fixes a function header comment to make sure the comment correctly reflects the function name. Mitch adds code to allow for additional VSIs since the number of VSIs that the firmware reports to us is a guaranteed minimum, not an absolute maximum. The hardware actually supports for more than the reported value, which we often need. Implements anti-spoofing for VFs for both MAC addresses and VLANs, as well as enable this feature by default for all VFs. Anjali changes the interrupt distribution policy to change the way resources for special features are handled. Fixes the driver to not fall back to one queue if the only feature enabled is ATR, since FD_SB and FD_ATR need to be checked independently in order to decide if we will support multiple queue or not. Allows the RSS table entry range and GPS to be any number, not necessarily a power of 2 because hardware does not restrict us to use a power of 2 GPS in the case of RSS as long as we are not sharing the RSS table with another VSI (VMDq). Frank modifies the driver to keep SR-IOV enabled in the case that RSS, VMFq, FD_SB and DCB are disabled so that SR-IOV does not get turned off unnecessarily. Jesse fixes a bug in receive checksum where the driver was not marking packets with bad checksums correctly, especially IPv6 packets with a bad checksum. To do this correctly, we need a define that may be set by hardware in rare cases. Greg fixes the driver to delete all the old and stale MAC filters for the VF VSI when the host administrator changes the VF MAC address from under its feet. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Jun, 2014 5 commits
-
-
Shannon Nelson authored
Bumpity and Fred Worm say it's time to change the numbers again. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Change-ID: I658731d022ea23cedede4be2bfecd8b4cc68d270 Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
We tell the HW upper boundary of power of 2 in VSI config, but the HW does not restrict us to use just power of 2 GPS in case of RSS as long as we are not sharing the RSS table with another VSI (VMDq). We at present are not doing RSS in VMDq VSI. If we were to enable that and if the system had CPU count which was not power 2, the VMDq VSIs will see a little skewed distribution. Change-ID: I3ea797ce9065a3ca4fc4d04251bf195463410473 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Delete all the old and stale MAC filters for the VF VSI when the host administrator changes the VF MAC address from under its feet. Also don't bother to add a filter for the VSI when its going to go away anyway. Just record the new address and punch the VF reset. Change-ID: Ic0d12055926f41989d1965ccf500053729c063ad Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
FD_SB and FD_ATR needs to be checked independently in order to decide if we will support multiple queues or not. Change-ID: I9d3274f5924c79e29efdbcf66a2fcca1fee2107f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
The driver was not marking packets with bad checksums correctly, especially IPv6 packets with a bad checksum. To do this correctly we need a define that may be set by hardware in rare cases. Change-ID: I1a997b72b491ded27a78ac3bce1197b2d2611130 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-