Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Erez Zilber <erezz@voltaire.com>

This is based on user feedback from Doug Ledford at RedHat:

Events that occur on an rdma_cm_id are reported to userspace through an
event channel.  Connection request events are reported on the event
channel associated with the listen.  When the connection is accepted, a
new rdma_cm_id is created and automatically uses the listen event
channel.  This is suboptimal where the user only wants listen events on
that channel.

Additionally, it may be desirable to have events related to connection
establishment use a different event channel than those related to
already established connections.

Allow the user to migrate an rdma_cm_id between event channels. All
pending events associated with the rdma_cm_id are moved to the new event
channel.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Enable conn_id remove on the passive side after connection
establishment.  This corrects an issue where the IB driver can't be
unloaded after running applications over RDS.  The 'dev_remove' counter
does not reach 0 for established connections on the passive side.

This problem is limited to device removal, and only occurs on the
passive side if there are established connections.
Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

In cancel_mads(), MADs are moved from the wait_list and local_list
to a cancel_list for processing.  However, the structures on these two
lists are not the same.  The wait_list references struct
ib_mad_send_wr_private, but local_list references struct
ib_mad_local_private.  Cancel_mads() treats all items moved to the
cancel_list as struct ib_mad_send_wr_private.  This leads to a system
crash when requests are moved from the local_list to the cancel_list.

Fix this by leaving local_list alone.  All requests on the local_list
have completed are just awaiting processing by a queued worker thread.

Bug (crash) reported by Dotan Barak <dotanb@dev.mellanox.co.il>.
Problem with local_list access reported by Robert Reynolds
<rreynolds@opengridcomputing.com>.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add performance/debug counters to track sent/received messages, retries,
and duplicates.  Counters are tracked per CM message type, per port.

The counters are always enabled, so intrusive state tracking is not done.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

To allow ULPs to tune timeout values and capture retry statistics,
report the number of times that a mad send operation was retried.

For RMPP mads, report the total number of times that the any portion
(send window) of the send operation was retried.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

P_key changes can invalidate multicast groups.  Report errors on all
multicast groups affected by a pkey change.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

log_max_eqs is a 4-bit field, not a 3-bit field in the response to the
QUERY_DEV_CAP FW command, so we should mask with 0xf instead of 0x7
when reading it.

Found by Yossi Leybovitch of Mellanox.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add the work completion error code to the QP error debug output.
This makes it easier to determine the cause of the error.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

An internal code review found the comment here lacking -- update it with 
more specifics of how and why the rmb() is there.
Signed-off-by: Arthur Jones <arthur.jones@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

During a code review, someone noticed the comments didn't match the code.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The gen2_basic tests check for the errno value when a CQ is resized
smaller than the number of outstanding completions queue on the CQ.
This patch changes ib_ipath to return EINVAL which is what ib_mthca
returns and what gen2_basic expects.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Code review pointed out that the locking around uses of ipath_sendctrl 
and kr_sendctrl were, in several places, incorrect and/or inconsistent.
Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

At one point in time there was code to allow a user process to
wait for a send buffer if none were available. This feature was
never used and most of the code was removed. This removes
some missed unused code.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The 5.0 firmware now supports translating sgls in recv work requests,
so remove the host driver logic currently doing the translation.

Note: this change requires 5.0 firmware.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Currently the call into cxgb3 to get the driver info is not serialized.
The iw_cxgb3 module needs to hold the rtnl_lock around the ethtool ops
call like dev_ioctl() does.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add missing spaces in the middle of format strings.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Michael Albaugh <Michael.Albaugh@qlogic.com>
Tested-by: Arthur Jones <arthur.jones@qlogic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The local loopback of an outgoing DR SMP response is limited to those
that originate at the driver specific SMA implementation during the
driver specific process_mad() function.  This patch enables a
returning DR SMP originating in userspace (or elsewhere) to be
delivered to the local managment stack.  In this specific case the
driver process_mad() function does not consume or process the MAD, so
a reponse mad has not be created and the original MAD must manually be
copied to the MAD buffer that is to be handed off to the local agent.
Signed-off-by: Steve Welch <swelch@systemfabricworks.com>
Acked-by: Hal Rosenstock <hal@xsigo.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

This patch is in response to reviewing a patch to the core MAD
processing which fixes loopback of directed route packets to/from user
level MAD agents.  This change enables the core code to work for
ib_ipath by fixing the return code from the ipath process_mad method.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

In ib_mad_recv_done_handler(), the response pointer is checked for
NULL after allocating it.  It is then checked again in the local
process_mad() path but there is no possibility of it changing in
between.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Acked-by: Hal Rosenstock <hal@xsigo.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Set the initiator depth and responder resources to the device max
values for new connect request events in the iWARP connection manager.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Improve interrupt handler cache footprint by noinline'ing error
functions that are rarely called.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Some IB adapters (notably IBM's eHCA) do not implement SRQs (shared
receive queues).  The current IPoIB connected mode support only works
on devices that support SRQs.

Fix this by adding support for using the receive queue of each
connected mode receive QP.  The disadvantage of this compared to using
an SRQ is that it means a full queue of receives must be posted for
each remote connected mode peer, which means that total memory usage
is potentially much higher than when using SRQs.  To manage this, add
a new module parameter "max_nonsrq_conn_qp" that limits the number of
connections allowed per interface.

The rest of the changes are fairly straightforward: we use a table of
struct ipoib_cm_rx to hold all the active connections, and put the
table index of the connection in the high bits of receive WR IDs.
This is needed because we cannot rely on the struct ib_wc.qp field for
non-SRQ receive completions.  Most of the rest of the changes just
test whether or not an SRQ is available, and post receives or find
received packets in the right place depending on the answer.

Cleaning up dead connections actually becomes simpler, because we do
not have to do the "last WQE reached" dance that is required to
destroy QPs attached to an SRQ.  We just move the QP to the error
state and wait for all pending receives to be flushed.
Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>

[ Completely rewritten and split up, based on Pradeep's work.  Several
  bugs fixed and no doubt several bugs introduced.  - Roland ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Factor out the code for going through the rx_reap list of struct
ipoib_cm_rx and freeing each one.  This consolidates the code
duplicated between ipoib_cm_dev_stop() and ipoib_cm_rx_reap() and
reduces the risk of error when adding additional accounting.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Factor out the code to create an SRQ and allocate the receive ring in
ipoib_cm_dev_init() into a new function ipoib_cm_create_srq().  This
will make the code neater when support for devices that don't implement
SRQs is added.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Factor out the code to unmap/free skbs and free the receive ring in
ipoib_cm_dev_cleanup() into a new function ipoib_cm_free_rx_ring().
This function will be called from a couple of other places when
support for devices that don't implement SRQs is added.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Fix whitespace blunders, convert "foo* bar" to "foo *bar", etc.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Commit 23b9c1ab ("Infiniband: make ipath driver use default driver
groups.") introduced a bug in the ipath driver where
ipath_device_create_group() fell through into the error path, even on
success, which meant that the sysfs groups it created would always get
removed right away.  This made ipath_device_remove_group() hit the
BUG_ON() in sysfs_remove_group() when it tried to remove those groups a
second time.

Correct the return path so that the groups stick around until they are
supposed to be cleaned up.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: make mls_compute_sid always polyinstantiate
  security/selinux: constify function pointer tables and fields
  security: add a secctx_to_secid() hook
  security: call security_file_permission from rw_verify_area
  security: remove security_sb_post_mountroot hook
  Security: remove security.h include from mm.h
  Security: remove security_file_mmap hook sparse-warnings (NULL as 0).
  Security: add get, set, and cloning of superblock security information
  security/selinux: Add missing "space"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  [AVR32] extint: Set initial irq type to low level
  [AVR32] extint: change set_irq_type() handling
  [AVR32] NMI debugging
  [AVR32] constify function pointer tables
  [AVR32] ATNGW100: Update defconfig
  [AVR32] ATSTK1002: Update defconfig
  [AVR32] Kconfig: Choose daughterboard instead of CPU
  [AVR32] Add support for ATSTK1003 and ATSTK1004
  [AVR32] Clean up external DAC setup code
  [AVR32] ATSTK1000: Move gpio-leds setup to setup.c
  [AVR32] Add support for AT32AP7001 and AT32AP7002
  [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg
  [AVR32] Oprofile support
  [AVR32] Include instrumentation menu
  Disable VGA text console for AVR32 architecture
  [AVR32] Enable debugging only when needed
  ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME
  [AVR32] Remove redundant try_to_freeze() call from do_signal()
  [AVR32] Drop GFP_COMP for DMA memory allocations

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (56 commits)
  [GFS2] Allow journal recovery on read-only mount
  [GFS2] Lockup on error
  [GFS2] Fix page_mkwrite truncation race path
  [GFS2] Fix typo
  [GFS2] Fix write alloc required shortcut calculation
  [GFS2] gfs2_alloc_required performance
  [GFS2] Remove unneeded i_spin
  [GFS2] Reduce inode size by moving i_alloc out of line
  [GFS2] Fix assert in log code
  [GFS2] Fix problems relating to execution of files on GFS2
  [GFS2] Initialize extent_list earlier
  [GFS2] Allow page migration for writeback and ordered pages
  [GFS2] Remove unused variable
  [GFS2] Fix log block mapper
  [GFS2] Minor correction
  [GFS2] Eliminate the no longer needed sd_statfs_mutex
  [GFS2] Incremental patch to fix compiler warning
  [GFS2] Function meta_read optimization
  [GFS2] Only fetch the dinode once in block_map
  [GFS2] Reorganize function gfs2_glmutex_lock
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits)
  [CRYPTO] twofish: Merge common glue code
  [CRYPTO] hifn_795x: Fixup container_of() usage
  [CRYPTO] cast6: inline bloat--
  [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long
  [CRYPTO] tcrypt: Make xcbc available as a standalone test
  [CRYPTO] xcbc: Remove bogus hash/cipher test
  [CRYPTO] xcbc: Fix algorithm leak when block size check fails
  [CRYPTO] tcrypt: Zero axbuf in the right function
  [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation
  [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h
  [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20
  [CRYPTO] tcrypt: Add select of AEAD
  [CRYPTO] salsa20: Add x86-64 assembly version
  [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version)
  [CRYPTO] gcm: Introduce rfc4106
  [CRYPTO] api: Show async type
  [CRYPTO] chainiv: Avoid lock spinning where possible
  [CRYPTO] seqiv: Add select AEAD in Kconfig
  [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy
  [CRYPTO] null: Allow setkey on digest_null 
  ...

This can be broken down into these major areas:
 - Documentation updates (language translations and fixes, as
   well as kobject and kset documenatation updates.)
 - major kset/kobject/ktype rework and fixes.  This cleans up the
   kset and kobject and ktype relationship and architecture,
   making sense of things now, and good documenation and samples
   are provided for others to use.  Also the attributes for
   kobjects are much easier to handle now.  This cleaned up a LOT
   of code all through the kernel, making kobjects easier to use
   if you want to.
 - struct bus_type has been reworked to now handle the lifetime
   rules properly, as the kobject is properly dynamic.
 - struct driver has also been reworked, and now the lifetime
   issues are resolved.
 - the block subsystem has been converted to use struct device
   now, and not "raw" kobjects.  This patch has been in the -mm
   tree for over a year now, and finally all the issues are
   worked out with it.  Older distros now properly work with new
   kernels, and no userspace updates are needed at all.
 - nozomi driver is added.  This has also been in -mm for a long
   time, and many people have asked for it to go in.  It is now
   in good enough shape to do so.
 - lots of class_device conversions to use struct device instead.
   The tree is almost all cleaned up now, only SCSI and IB is the
   remaining code to fix up...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (196 commits)
  Driver core: coding style fixes
  Kobject: fix coding style issues in kobject c files
  Kobject: fix coding style issues in kobject.h
  Driver core: fix coding style issues in device.h
  spi: use class iteration api
  scsi: use class iteration api
  rtc: use class iteration api
  power supply : use class iteration api
  ieee1394: use class iteration api
  Driver Core: add class iteration api
  Driver core: Cleanup get_device_parent() in device_add() and device_move()
  UIO: constify function pointer tables
  Driver Core: constify the name passed to platform_device_register_simple
  driver core: fix build with SYSFS=n
  sysfs: make SYSFS_DEPRECATED depend on SYSFS
  Driver core: use LIST_HEAD instead of call to INIT_LIST_HEAD in __init
  kobject: add sample code for how to use ksets/ktypes/kobjects
  kobject: add sample code for how to use kobjects in a simple manner.
  kobject: update the kobject/kset documentation
  kobject: remove old, outdated documentation.
  ...

If the node we're booting on doesn't have memory, bootstrapping kmalloc()
caches resorts to fallback_alloc() which requires ->nodelists set for all
nodes.  Fix that by calling set_up_list3s() for CACHE_CACHE in
kmem_cache_init().

As kmem_getpages() is called with GFP_THISNODE set, this used to work before
because of breakage in 2.6.22 and before with GFP_THISNODE returning pages from
the wrong node if a node had no memory. So it may have worked accidentally and
in an unsafe manner because the pages would have been associated with the wrong
node which could trigger bug ons and locking troubles.
Tested-by: Mel Gorman <mel@csn.ul.ie>
Tested-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
[ With additional one-liner by Olaf Hering  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix overwriting the stack with the version string
(it is currently 10 bytes + zero) when unloading the
capidrv module. Safeguard against overwriting it
should the version string grow in the future.

Should fix Kernel Bug Tracker Bug 9696.
Signed-off-by: Gerd v. Egidy <gerd.von.egidy@intra2net.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch allows gfs2 to perform journal recovery even if it is mounted
read-only. Strictly speaking, a read-only mount should not be writing to
the filesystem, but we do this only to perform journal recovery. A
read-only mount will fail if we don't recover the dirty journal. Also,
when gfs2 is used as a root filesystem, it will be mounted read-only
before being mounted read-write during the boot sequence. A failed
read-only mount will panic the machine during bootup.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>