- 13 Apr, 2010 17 commits
-
-
Matt Carlson authored
This patch updates the tg3 version to 3.110. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
This patch removes the following checkpatch errors: * return is not a function, parentheses are not required * space prohibited between function name and open parenthesis '(' Signed-off-by: -
Matt Carlson authored
The maximum packet size that gets programmed into the standard producer ring control block is directly related to the packet size used to allocate packet buffers. This patch removes the redundant preprocessor constant. Signed-off-by:
-
Matt Carlson authored
The tg3 driver is written so that VLAN tagged packets can be accepted, even if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. (Think raw interfaces.) If the device has ASF support enabled, the firmware requires the driver to enable VLAN tag stripping. If VLAN tagging is not explicitly supported by the kernel and ASF is enabled, the driver will have to reinject the VLAN tag back into the packet stream. Signed-off-by:
-
Matt Carlson authored
On a PCIX bus, the 5701 has a bug which requires the driver to double copy all rx packets. The rx code uses the rx_offset device member as a flag to determine if this workaround should take effect. The following patch will modify the rx_offset member such that this test will become less clear. The patch starts by integrating the workaround check into the packet length check. It rounds out the implementation by relaxing the workaround restrictions if the platform has efficient unaligned accesses. Signed-off-by:
-
Matt Carlson authored
This patch reduces the core clock to 6.25MHz when operating at 10Mbps link speed. This is needed to prevent a bug that will ultimately cause transmits to cease. Signed-off-by:
-
Matt Carlson authored
This patch sets the Maximum Read Request Size for the card reader function to 1024 bytes to prevent an SD controller lockup. Signed-off-by:
-
Matt Carlson authored
This patch disables CLKREQ in L2 to workaround a chipset bug. Signed-off-by:
-
Eric Dumazet authored
With latest CONFIG_PROVE_RCU stuff, I felt more comfortable to make this work. sk->sk_dst_cache is currently protected by a rwlock (sk_dst_lock) This rwlock is readlocked for a very small amount of time, and dst entries are already freed after RCU grace period. This calls for RCU again :) This patch converts sk_dst_lock to a spinlock, and use RCU for readers. __sk_dst_get() is supposed to be called with rcu_read_lock() or if socket locked by user, so use appropriate rcu_dereference_check() condition (rcu_read_lock_held() || sock_owned_by_user(sk)) This patch avoids two atomic ops per tx packet on UDP connected sockets, for example, and permits sk_dst_lock to be much less dirtied. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Dont use netdev_warn() in dev_cap_txqueue() and get_rps_cpu() so that we can catch following warnings without crash. bond0.2240 received packet on queue 6, but number of RX queues is 1 bond0.2240 received packet on queue 11, but number of RX queues is 1 Signed-off-by:
-
Manfred Rudigier authored
If a packet has the skb_shared_tx->hardware flag set the device is instructed to generate a TX timestamp and write it back to memory after the frame is transmitted. During the clean_tx_ring operation the timestamp will be extracted and copied into the skb_shared_hwtstamps struct of the skb. TX timestamping is enabled by setting the tx_type to something else than HWTSTAMP_TX_OFF with the SIOCSHWTSTAMP ioctl command. It is only supported by eTSEC devices. Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicron.at> Signed-off-by:
-
Manfred Rudigier authored
The device is configured to insert hardware timestamps into all received packets. The RX timestamps are extracted from the padding alingment bytes during the clean_rx_ring operation and copied into the skb_shared_hwtstamps struct of the skb. This extraction only happens if the rx_filter was set to something else than HWTSTAMP_FILTER_NONE with the SIOCSHWTSTAMP ioctl command. Hardware timestamping is only supported for eTSEC devices. To indicate device support the new FSL_GIANFAR_DEV_HAS_TIMER flag was introduced. Signed-off-by:
-
John Linn authored
This patch adds support for using the LL TEMAC Ethernet driver on non-Virtex 5 platforms by adding support for accessing the Soft DMA registers as if they were memory mapped instead of solely through the DCR's (available on the Virtex 5). The patch also updates the driver so that it runs on the MicroBlaze. The changes were tested on the PowerPC 440, PowerPC 405, and the MicroBlaze platforms. Signed-off-by:
John Tyner <jtyner@cs.ucr.edu> Signed-off-by:
John Linn <john.linn@xilinx.com> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
John Linn authored
The virt_to_bus call should not be used any longer as it's considered illegal. The driver has the physical address of the buffer in the descriptor such that it's not necessary anyway. Signed-off-by:
-
Richard Cochran authored
Enable the SO_TIMESTAMPING socket infrastructure for raw packet sockets. We introduce PACKET_TX_TIMESTAMP for the control message cmsg_type. Similar support for UDP and CAN sockets was added in commit 51f31cabSigned-off-by:
Richard Cochran <richard.cochran@omicron.at> Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Matthias Fuchs authored
This patch adds support for SJA1000 based PCI CAN interface cards from electronic system design gmbh. Some changes have been done on the common code: - esd boards must not have the 2nd local interupt enabled (PLX9030/9050) - a new path for PLX9056/PEX8311 chips has been added - new plx9056 reset function has been implemented - struct plx_card_info got a reset function entry In detail the following additional boards are now supported: CAN-PCI/200 (PCI) CAN-PCI/266 (PCI) CAN-PMC266 (PMC module) CAN-PCIe/2000 (PCI Express) CAN-CPCI/200 (Compact PCI, 3U) CAN-PCI104 (PCI104) Signed-off-by:Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
- 11 Apr, 2010 7 commits
-
-
David S. Miller authored
Back in commit 04a0551c ("loopback: Drop obsolete ip_summed setting") we stopped setting CHECKSUM_UNNECESSARY in the loopback xmit. This is because such a setting was a lie since it implies that the checksum field of the packet is properly filled in. Instead what happens normally is that CHECKSUM_PARTIAL is set and skb->csum is calculated as needed. But this was only happening for TCP data packets (via the skb->ip_summed assignment done in tcp_sendmsg()). It doesn't happen for non-data packets like ACKs etc. Fix this by setting skb->ip_summed in the common non-data packet constructor. It already is setting skb->csum to zero. But this reminds us that we still have things like ip_output.c's ip_dev_loopback_xmit() which sets skb->ip_summed to the value CHECKSUM_UNNECESSARY, which Herbert's patch teaches us is not valid. So we'll have to address that at some point too. Signed-off-by:
-
Herbert Xu authored
inet: Remove unused send_check length argument This patch removes the unused length argument from the send_check function in struct inet_connection_sock_af_ops. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
Yinghai <yinghai.lu@oracle.com> Signed-off-by:
-
Herbert Xu authored
tcp: Handle CHECKSUM_PARTIAL for SYNACK packets for IPv6 This patch moves the common code between tcp_v6_send_check and tcp_v6_gso_send_check into a new function __tcp_v6_send_check. It then uses the new function in tcp_v6_send_synack as well as tcp_v6_send_response so that they handle CHECKSUM_PARTIAL properly. Signed-off-by:
-
Herbert Xu authored
tcp: Handle CHECKSUM_PARTIAL for SYNACK packets for IPv4 This patch moves the common code between tcp_v4_send_check and tcp_v4_gso_send_check into a new function __tcp_v4_send_check. It then uses the new function in tcp_v4_send_synack so that it handles CHECKSUM_PARTIAL properly. Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
-
David S. Miller authored
-
David S. Miller authored
This reverts commit 2626419a. It causes regressions for people with IGB cards. Connection requests don't complete etc. The true cause of the issue is still not known, but we should sort this out in net-next-2.6 not net-2.6 Signed-off-by:
-
- 09 Apr, 2010 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Check correct variable for allocation failure RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp() RDMA/cm: Set num_paths when manually assigning path records IB/cm: Fix device_create() return value check
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] nss: add missing .previous statement to asm function [S390] increase default size of vmalloc area [S390] s390: disable change bit override [S390] fix io_return critical section cleanup [S390] sclp_async: potential buffer overflow [S390] arch/s390/kernel: Add missing unlock
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits) cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch loop: Update mtime when writing using aops block: expose the statistics in blkio.time and blkio.sectors for the root cgroup backing-dev: Handle class_create() failure Block: Fix block/elevator.c elevator_get() off-by-one error drbd: lc_element_by_index() never returns NULL cciss: unlock on error path cfq-iosched: Do not merge queues of BE and IDLE classes cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging i2o: Remove the dangerous kobj_to_i2o_device macro block: remove 16 bytes of padding from struct request on 64bits cfq-iosched: fix a kbuild regression block: make CONFIG_BLK_CGROUP visible Remove GENHD_FL_DRIVERFS block: Export max number of segments and max segment size in sysfs block: Finalize conversion of block limits functions block: Fix overrun in lcm() and move it to lib vfs: improve writeback_inodes_wb() paride: fix off-by-one test drbd: fix al-to-on-disk-bitmap for 4k logical_block_size ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (29 commits) drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers drm/nv50: implement gpio set/get routines drm/nv50: parse/use some more de-magiced parts of gpio table entries drm/nouveau: store raw gpio table entry in bios gpio structs drm/nv40: Init some tiling-related PGRAPH state. drm/nv50: Add NVA3 support in ctxprog/ctxvals generator. drm/nv50: another dodgy DP hack drm/nv50: punt hotplug irq handling out to workqueue drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders drm/nv50: Allow using the NVA3 new compute class. drm/nv50: cleanup properly if PDISPLAY init fails drm/nouveau: fixup the init failure paths some more drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark drm/nv40: add LVDS table quirk for Dell Latitude D620 drm/nv40: rework lvds table parsing drm/nouveau: detect vram amount once, and save the value drm/nouveau: remove some unused members from drm_nouveau_private drm/nouveau: Make use of TTM busy_placements. drm/nv50: add more 0x100c80 flushy magic drm/nv50: fix fbcon when framebuffer above 4GiB mark ...
-
David Howells authored
radix_tree_tag_get() is not safe to use concurrently with radix_tree_tag_set() or radix_tree_tag_clear(). The problem is that the double tag_get() in radix_tree_tag_get(): if (!tag_get(node, tag, offset)) saw_unset_tag = 1; if (height == 1) { int ret = tag_get(node, tag, offset); may see the value change due to the action of set/clear. RCU is no protection against this as no pointers are being changed, no nodes are being replaced according to a COW protocol - set/clear alter the node directly. The documentation in linux/radix-tree.h, however, says that radix_tree_tag_get() is an exception to the rule that "any function modifying the tree or tags (...) must exclude other modifications, and exclude any functions reading the tree". The problem is that the next statement in radix_tree_tag_get() checks that the tag doesn't vary over time: BUG_ON(ret && saw_unset_tag); This has been seen happening in FS-Cache: https://www.redhat.com/archives/linux-cachefs/2010-April/msg00013.html To this end, remove the BUG_ON() from radix_tree_tag_get() and note in various comments that the value of the tag may change whilst the RCU read lock is held, and thus that the return value of radix_tree_tag_get() may not be relied upon unless radix_tree_tag_set/clear() and radix_tree_delete() are excluded from running concurrently with it. Reported-by:Romain DEGEZ <romain.degez@smartjog.com> Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Pekka Enberg authored
As suggested by Linus, fix up kmem_ptr_validate() to handle non-kernel pointers more graciously. The patch changes kmem_ptr_validate() to use the newly introduced kern_ptr_validate() helper to check that a pointer is a valid kernel pointer before we attempt to convert it into a 'struct page'. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Matt Mackall <mpm@selenic.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Acked-by:
Christoph Lameter <cl@linux-foundation.org> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Pekka Enberg authored
As suggested by Linus, introduce a kern_ptr_validate() helper that does some sanity checks to make sure a pointer is a valid kernel pointer. This is a preparational step for fixing SLUB kmem_ptr_validate(). Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Matt Mackall <mpm@selenic.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Linus Torvalds authored
This reverts commit ba168fc3. It changes user-visible sysfs interfaces, and breaks some existing user space applications which apparently rely on the fact that the output does not contain the "0x" prefix. Requested-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
-
Roland Dreier authored
-
Martin Schwidefsky authored
Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
The savesys_ipl_nss asm function is put into the .init.text section however it is missing a ".previous" section which would restore the previous section. Luckily all functions in early.c are init functions so it doesn't matter currently. Signed-off-by:
-
Martin Schwidefsky authored
The default size of the vmalloc area is currently 1 GB. The memory resource controller uses about 10 MB of vmalloc space per gigabyte of memory. That turns a system with more than ~100 GB memory unbootable with the default vmalloc size. It costs us nothing to increase the default size to some more adequate value, e.g. 128 GB. Signed-off-by: -
Christian Borntraeger authored
commit 6a985c61 ([S390] s390: use change recording override for kernel mapping) deactivated the change bit recording for the kernel mapping to improve the performance. This works most of the time, but there are cases (e.g. kernel runs in home space, futex atomic compare xcmg) where we modify user memory with the kernel mapping instead of the user mapping. Instead of fixing these cases, this patch just deactivates change bit override to avoid future problems with other kernel code that might use the kernel mapping for user memory. CC: stable@kernel.org Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
If a machine check interrupts the io interrupt handler on one of the instructions between io_return and io_leave the critical section cleanup code will move the return psw to io_work_loop. By doing that the switch from the asynchronous interrupt stack to the process stack is skipped. If e.g. TIF_NEED_RESCHED is set things break because the scheduler is called with the asynchronous interrupts stack. Moving the psw back to io_return instead fixes the problem. Signed-off-by: -
Dan Carpenter authored
"len" hasn't been properly range checked so we shouldn't use it as an array offset. This can only be written to by root but it would still be annoying to accidentally write more than 3 characters and corrupt your memory. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
