Commits · 39467fc1054a91efa697162a94e5b0e1a4b7b580 · nexedi / linux

11 Sep, 2017 5 commits

Input: ucb1400_ts - fix suspend and resume handling · 39467fc1

Dmitry Torokhov authored Aug 31, 2017

Instead of stopping the touchscreen we were starting it in suspend, and
disabling it in resume.

Fixes: c899afed ("Input: ucb1400_ts - convert to threaded IRQ")
Reported-by: Anton Volkov <avolkov@ispras.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

39467fc1

Input: edt-ft5x06 - fix access to non-existing register · 47014752

Luca Ceresoli authored Sep 07, 2017

reg_addr->reg_report_rate is supposed to exist in M06, not M09.

The driver is written to skip avoids access to non-existing registers
when the register address is NO_REGISTER (0xff). But
reg_addr->reg_report_rate is initialized to 0x00 by devm_kzalloc() (in
edt_ft5x06_ts_probe()) and not changed thereafter. So the checks do
not work and an access to register 0x00 is done.

Fix by setting reg_addr->reg_report_rate to NO_REGISTER.

Also fix the only place where reg_report_rate is checked against zero
instead of NO_REGISTER.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

47014752

Input: elantech - make arrays debounce_packet static, reduces object code size · 4f1b461d

Colin Ian King authored Sep 07, 2017

Don't populate the arrays debounce_packet on the stack, instead make
them static.  Makes the object code smaller by over 870 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  30553	   9152	      0	  39705	   9b19	drivers/input/mouse/elantech.o

After:
   text	   data	    bss	    dec	    hex	filename
  29521	   9312	      0	  38833	   97b1	drivers/input/mouse/elantech.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

4f1b461d

Input: surface3_spi - make const array header static, reduces object code size · 023c437a

Colin Ian King authored Sep 07, 2017

Don't populate the const array header on the stack, instead make it
static.  Makes the object code smaller by over 180 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
   6003	   1536	      0	   7539	   1d73	surface3_spi.o

After:
   text	   data	    bss	    dec	    hex	filename
   5726	   1632	      0	   7358	   1cbe	surface3_spi.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

023c437a

Input: goodix - add support for capacitive home button · 4a54feea

Sergei A. Trusov authored Sep 06, 2017

On some x86 tablets with a Goodix touchscreen, the Windows logo on the
front is a capacitive home button. Touching this button results in a touch
with bit 4 of the first byte set, while only the lower 4 bits (0-3) are
used to indicate the number of touches.

Report a KEY_LEFTMETA press when this happens.

Note that the hardware might support more than one button, in which
case the "id" byte of coor_data would identify the button in question.
This is not implemented as we don't have access to hardware with
multiple buttons.
Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

4a54feea

04 Sep, 2017 2 commits

Input: add a driver for PWM controllable vibrators · 3e5b0851

Sebastian Reichel authored Sep 04, 2017

Provide a simple driver for PWM controllable vibrators.
It will be used by Motorola Droid 4.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

3e5b0851

Input: adi - make array seq static, reduces object code size · 1bf21b33

Colin Ian King authored Sep 04, 2017

Don't populate the array seq on the stack, instead make it static.
Makes the object code smaller by over 170 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  13227	   3232	      0	  16459	   404b	drivers/input/joystick/adi.o

After:
   text	   data	    bss	    dec	    hex	filename
  12957	   3328	      0	  16285	   3f9d	drivers/input/joystick/adi.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

1bf21b33

01 Sep, 2017 1 commit

Input: byd - make array seq static, reduces object code size · 08d6ac9e

Colin Ian King authored Aug 31, 2017

Don't populate the array seq on the stack, instead make it static.
Makes the object code smaller by over 1100 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
   6152	   1216	     64	   7432	   1d08	drivers/input/mouse/byd.o

After:
   text	   data	    bss	    dec	    hex	filename
   4974	   1280	     64	   6318	   18ae	drivers/input/mouse/byd.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

08d6ac9e

31 Aug, 2017 3 commits

Input: xilinx_ps2 - fix multiline comment style · da1a42cd

Michal Simek authored Aug 31, 2017

Fix multiline comments style not to be reported by checkpatch.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

da1a42cd

Input: pxa27x_keypad - handle return value of clk_prepare_enable · 117b2dc5

Arvind Yadav authored Aug 31, 2017

clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

117b2dc5

Input: tegra-kbc - handle return value of clk_prepare_enable · 8a7f102c

Arvind Yadav authored Aug 31, 2017

clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

8a7f102c

28 Aug, 2017 2 commits

Input: PS/2 gpio bit banging driver for serio bus · 9ee0a055

Danilo Krummrich authored Aug 28, 2017

This driver provides PS/2 serio bus support by implementing bit banging
with the GPIO API. The GPIO pins, data and clock, can be configured with
a node in the device tree or by generic device properties (GDP).

Writing to a device is supported as well, though it is possible timings
can not be halt as they are tough and difficult to reach with bit banging.
Therefore it can be configured (also in DT and GDP) whether the serio
write function should be available for clients.

This driver is for development purposes and not recommended for productive
use. However, this driver can be useful e.g. when no USB port is available
or using old peripherals is desired as PS/2 controller chips getting rare.

This driver was tested on bcm2825 and on Kirin 960 and it worked well
together with the atkbd and psmouse driver.
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

9ee0a055

Input: xen-kbdfront - enable auto repeat for xen keyboard frontend driver · 0ca06810

Liang Yan authored Aug 28, 2017

Long pressed key could not show right in XEN vncviewer after tigervnc
client changed the way how to send repeat keys, from "Down Up Down Up
..." to "Down Down ... Up". This will report autorepeat to input by
checking if same key being pressed, and let handler process it finally.
Signed-off-by: Liang Yan <lyan@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

0ca06810

24 Aug, 2017 1 commit

Input: ambakmi - constify amba_id · b54bf2fd

Arvind Yadav authored Aug 23, 2017

amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

b54bf2fd

21 Aug, 2017 2 commits

Input: atmel_mxt_ts - add support for reset line · f657b00d

Sebastian Reichel authored Jul 25, 2017

Provide support for controlling reset pin. If this is not driven
correctly the device will be held in reset and will not respond.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

f657b00d

Input: atmel_mxt_ts - use more managed resources · 8cc8446b

Sebastian Reichel authored Jul 25, 2017

Switch mxt_data and interrupt to resource managed allocation methods,
which cleans up the driver slightly and prepares for adding
reset GPIO support.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

8cc8446b

19 Aug, 2017 24 commits

Input: wacom_w8001 - constify serio_device_id · 663c8b55

Arvind Yadav authored Aug 18, 2017

serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

663c8b55