- 11 May, 2013 39 commits
-
-
Jani Nikula authored
commit dc652f90 upstream. Backlight cleanup in the eDP connector destroy callback caused the backlight device to be removed on some systems that first initialized LVDS and then attempted to initialize eDP. Prevent multiple backlight initializations, and ensure backlight cleanup is only done once by moving it to modeset cleanup. A small wrinkle is the introduced asymmetry in backlight setup/cleanup. This could be solved by adding refcounting, but it seems overkill considering that there should only ever be one backlight device. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55701Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Peter Verthez <peter.verthez@skynet.be> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Vetter authored
commit f30da187 upstream. It will be only consistent once we've restored all the crtcs. Since a bunch of other callers also want to just restore a single crtc, add a boolean to disable checking only where it doesn't make sense. Note that intel_modeset_setup_hw_state already has a call to intel_modeset_check_state at the end, so we don't reduce the amount of checking. v2: Try harder not to create a big patch (Chris). v3: Even smaller (still Chris). Also fix a trailing space. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> References: https://lkml.org/lkml/2013/3/16/60 Cc: Tomas Melin <tomas.melin@iki.fi> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Tomas Melin <tomas.melin@iki.fi> Tested-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Paulo Zanoni authored
commit 3f704fa2 upstream. Check the VBT to see if the machine has inverted FDI RX polarity on CPT. Based on this bit, set the appropriate bit on the TRANS_CHICKEN2 registers. This should fix some machines that were showing black screens on all outputs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60029Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Chris Wilson authored
commit 4615d4c9 upstream. Enabling context support increases SwapBuffers latency by about 20% (measured on an i7-3720qm). We can offset that loss slightly by enabling faster caching for the contexts. As they are not backed by any particular cache (such as the sampler or render caches) our only option is to select the generic mid-level cache. This reduces the latency of the swap by about 5%. Oddly this effect can be observed running smokin-guns on IVB at 1280x1024: Using BLT copies for swaps: 151.67 fps Using Render copies for swaps (unpatched): 141.70 fps With contexts disabled: 150.23 fps With contexts in L3$: 150.77 fps Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
-
Chris Wilson authored
commit 25ff1195 upstream. In order to fully serialize access to the fenced region and the update to the fence register we need to take extreme measures on SNB+, and manually flush writes to memory prior to writing the fence register in conjunction with the memory barriers placed around the register write. Fixes i-g-t/gem_fence_thrash v2: Bring a bigger gun v3: Switch the bigger gun for heavier bullets (Arjan van de Ven) v4: Remove changes for working generations. v5: Reduce to a per-cpu wbinvd() call prior to updating the fences. v6: Rewrite comments to ellide forgotten history. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62191Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Egbert Eich authored
commit 7a7d1fb7 upstream. The connector associated with the encoder is considered active when the output associtated with this connector is active on the encoder. The encoder itself is considered active when either there is an active output on it or the respective SDVO channel is active. Having active outputs when the SDVO channel is inactive seems to be inconsistent: such states can be found when intel_modeset_setup_hw_state() collects the hardware state set by the BIOS. This inconsistency will be fixed in intel_sanitize_crtc() (when intel_crtc_update_dpms() is called), this however only happens when the encoder is associated with a crtc. This patch also reverts: commit bd6946e8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Apr 2 21:30:34 2013 +0200 drm/i915: Fix sdvo connector get_hw_state function Signed-off-by:
Egbert Eich <eich@suse.de> Suggested-by:
-
Christian Lamparter authored
commit 9e9dd0e8 upstream. The "Mobile Sandy Bridge CPUs" in the Fujitsu Esprimo Q900 mini desktop PCs are probably misleading the LVDS detection code in intel_lvds_supported. Nothing is connected to the LVDS ports in these systems. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Daniel Vetter authored
commit bd6946e8 upstream. The active output is only the currently selected one, which does not imply that it's actually enabled. Since we don't use the sdvo encoder side dpms support, we need to check whether the chip-side sdvo port is enabled instead. v2: Fix up Bugzilla links. v3: Simplify logic a bit (Chris). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60138 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63031 Cc: Egbert Eich <eich@pdx.freedesktop.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Egbert Eich <eich@pdx.freedesktop.org> (v2) Signed-off-by:
-
Dave Airlie authored
commit 306373b6 upstream. Port over the mgag200 fix to ast as it suffers the same issue. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
commit 219b4733 upstream. Currently we have a problem with this: 1. i915: create gem object 2. i915: export gem object to prime 3. radeon: import gem object 4. close prime fd 5. radeon: unref object 6. i915: unref object i915 has an imported object reference in its file priv, that isn't cleaned up properly until fd close. The reference gets added at step 2, but at step 6 we don't have enough info to clean it up. The solution is to take a reference on the dma-buf when we export it, and drop the reference when the gem handle goes away. So when we export a dma_buf from a gem object, we keep track of it with the handle, we take a reference to the dma_buf. When we close the handle (i.e. userspace is finished with the buffer), we drop the reference to the dma_buf, and it gets collected. This patch isn't meant to fix any other problem or bikesheds, and it doesn't fix any races with other scenarios. v1.1: move export symbol line back up. v2: okay I had to do a bit more, as the first patch showed a leak on one of my tests, that I found using the dma-buf debugfs support, the problem case is exporting a buffer twice with the same handle, we'd add another export handle for it unnecessarily, however we now fail if we try to export the same object with a different gem handle, however I'm not sure if that is a case I want to support, and I've gotten the code to WARN_ON if we hit something like that. v2.1: rebase this patch, write better commit msg. v3: cleanup error handling, track import vs export in linked list, these two patches were separate previously, but seem to work better like this. v4: danvet is correct, this code is no longer useful, since the buffer better exist, so remove it. v5: always take a reference to the dma buf object, import or export. (Imre Deak contributed this originally) v6: square the circle, remove import vs export tracking now that there is no difference Reviewed-by:
-
Imre Deak authored
commit 011c2282 upstream. In commit be8a42ae we inroduced a refcount problem, where on the drm_gem_prime_fd_to_handle() error path we'll call dma_buf_put() for self imported dma buffers. Fix this by taking a reference on the dma buffer in the .gem_import hook instead of assuming the caller had taken one. Besides fixing the bug this is also more logical. Signed-off-by:
-
Anisse Astier authored
commit e127dc28 upstream. Backlight hotkeys weren't working before on certain cedartrail laptops. The source of this problem is that the hotkeys' ASLE opregion interrupts were simply ignored. Driver seemed to expect the interrupt to be associated with a pipe, but it wasn't. Accepting the ASLE interrupt without an associated pipe event flag fixes the issue, the backlight code is called when needed, making the brightness keys work properly. [patrik: This patch affects irq handling on any netbook with opregion support] Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=833597 Reference: http://lists.freedesktop.org/archives/dri-devel/2012-July/025279.htmlSigned-off-by:
Anisse Astier <anisse@astier.eu> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Dave Airlie authored
commit 64171959 upstream. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Signed-off-by:
-
Dave Airlie authored
commit f3b2bbdc upstream. Port over the mgag200 fix to cirrus as it suffers the same issue. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Signed-off-by:
-
James Bottomley authored
commit 871dd928 upstream. linux-v3.8-rc1 and later support for plug for blkdev_issue_discard with commit 0cfbcafc (block: add plug for blkdev_issue_discard ) For example, 1) DISCARD rq-1 with size size 4GB 2) DISCARD rq-2 with size size 1GB If these 2 discard requests get merged, final request size will be 5GB. In this case, request's __data_len field may overflow as it can store max 4GB(unsigned int). This issue was observed while doing mkfs.f2fs on 5GB SD card: https://lkml.org/lkml/2013/4/1/292 Info: sector size = 512 Info: total sectors = 11370496 (in 512bytes) Info: zone aligned segment0 blkaddr: 512 [ 257.789764] blk_update_request: bio idx 0 >= vcnt 0 mkfs process gets stuck in D state and I see the following in the dmesg: [ 257.789733] __end_that: dev mmcblk0: type=1, flags=122c8081 [ 257.789764] sector 4194304, nr/cnr 2981888/4294959104 [ 257.789764] bio df3840c0, biotail df3848c0, buffer (null), len 1526726656 [ 257.789764] blk_update_request: bio idx 0 >= vcnt 0 [ 257.794921] request botched: dev mmcblk0: type=1, flags=122c8081 [ 257.794921] sector 4194304, nr/cnr 2981888/4294959104 [ 257.794921] bio df3840c0, biotail df3848c0, buffer (null), len 1526726656 This patch fixes this issue. Reported-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
Namjae Jeon <namjae.jeon@samsung.com> Tested-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jun'ichi Nomura authored
commit e5072664 upstream. Since 749fefe6 in v3.7 ("block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue()"), the following warning appears when multipath is used with CONFIG_PREEMPT=y. This patch moves blk_queue_bypass_start() before radix_tree_preload() to avoid the sleeping call while preemption is disabled. BUG: scheduling while atomic: multipath/2460/0x00000002 1 lock held by multipath/2460: #0: (&md->type_lock){......}, at: [<ffffffffa019fb05>] dm_lock_md_type+0x17/0x19 [dm_mod] Modules linked in: ... Pid: 2460, comm: multipath Tainted: G W 3.7.0-rc2 #1 Call Trace: [<ffffffff810723ae>] __schedule_bug+0x6a/0x78 [<ffffffff81428ba2>] __schedule+0xb4/0x5e0 [<ffffffff814291e6>] schedule+0x64/0x66 [<ffffffff8142773a>] schedule_timeout+0x39/0xf8 [<ffffffff8108ad5f>] ? put_lock_stats+0xe/0x29 [<ffffffff8108ae30>] ? lock_release_holdtime+0xb6/0xbb [<ffffffff814289e3>] wait_for_common+0x9d/0xee [<ffffffff8107526c>] ? try_to_wake_up+0x206/0x206 [<ffffffff810c0eb8>] ? kfree_call_rcu+0x1c/0x1c [<ffffffff81428aec>] wait_for_completion+0x1d/0x1f [<ffffffff810611f9>] wait_rcu_gp+0x5d/0x7a [<ffffffff81061216>] ? wait_rcu_gp+0x7a/0x7a [<ffffffff8106fb18>] ? complete+0x21/0x53 [<ffffffff810c0556>] synchronize_rcu+0x1e/0x20 [<ffffffff811dd903>] blk_queue_bypass_start+0x5d/0x62 [<ffffffff811ee109>] blkcg_activate_policy+0x73/0x270 [<ffffffff81130521>] ? kmem_cache_alloc_node_trace+0xc7/0x108 [<ffffffff811f04b3>] cfq_init_queue+0x80/0x28e [<ffffffffa01a1600>] ? dm_blk_ioctl+0xa7/0xa7 [dm_mod] [<ffffffff811d8c41>] elevator_init+0xe1/0x115 [<ffffffff811e229f>] ? blk_queue_make_request+0x54/0x59 [<ffffffff811dd743>] blk_init_allocated_queue+0x8c/0x9e [<ffffffffa019ffcd>] dm_setup_md_queue+0x36/0xaa [dm_mod] [<ffffffffa01a60e6>] table_load+0x1bd/0x2c8 [dm_mod] [<ffffffffa01a7026>] ctl_ioctl+0x1d6/0x236 [dm_mod] [<ffffffffa01a5f29>] ? table_clear+0xaa/0xaa [dm_mod] [<ffffffffa01a7099>] dm_ctl_ioctl+0x13/0x17 [dm_mod] [<ffffffff811479fc>] do_vfs_ioctl+0x3fb/0x441 [<ffffffff811b643c>] ? file_has_perm+0x8a/0x99 [<ffffffff81147aa0>] sys_ioctl+0x5e/0x82 [<ffffffff812010be>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff814310d9>] system_call_fastpath+0x16/0x1b Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Catalin Marinas authored
commit 0e7f7bcc upstream. ESR.WnR bit is always set on data cache maintenance faults even though the page is not required to have write permission. If a translation fault (page not yet mapped) happens for read-only user address range, Linux incorrectly assumes a permission fault. This patch adds the check of the ESR.CM bit during the page fault handling to ignore the 'write' flag. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Tim Northover <Tim.Northover@arm.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit 5b0c2759 upstream. Commit c079c287 ("RDMA/cxgb4: Fix error handling in create_qp()") broke SQ allocation. Instead of falling back to host allocation when on-chip allocation fails, it tries to allocate both. And when it does, and we try to free the address from the genpool using the host address, we hit a BUG and the system crashes as below. We create a new function that has the previous behavior and properly propagate the error, as intended. kernel BUG at /usr/src/packages/BUILD/kernel-ppc64-3.0.68/linux-3.0/lib/genalloc.c:340! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: rdma_ucm rdma_cm ib_addr ib_cm iw_cm ib_sa ib_mad ib_uverbs iw_cxgb4 ib_core ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables fuse loop dm_mod ipv6 ipv6_lib sr_mod cdrom ibmveth(X) cxgb4 sg ext3 jbd mbcache sd_mod crc_t10dif scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh ibmvscsic(X) scsi_transport_srp scsi_tgt scsi_mod Supported: Yes NIP: c00000000037d41c LR: d000000003913824 CTR: c00000000037d3b0 REGS: c0000001f350ae50 TRAP: 0700 Tainted: G X (3.0.68-0.9-ppc64) MSR: 8000000000029032 <EE,ME,CE,IR,DR> CR: 24042482 XER: 00000001 TASK = c0000001f6f2a840[3616] 'rping' THREAD: c0000001f3508000 CPU: 0 GPR00: c0000001f6e875c8 c0000001f350b0d0 c000000000fc9690 c0000001f6e875c0 GPR04: 00000000000c0000 0000000000010000 0000000000000000 c0000000009d482a GPR08: 000000006a170000 0000000000100000 c0000001f350b140 c0000001f6e875c8 GPR12: d000000003915dd0 c000000003f40000 000000003e3ecfa8 c0000001f350bea0 GPR16: c0000001f350bcd0 00000000003c0000 0000000000040100 c0000001f6e74a80 GPR20: d00000000399a898 c0000001f6e74ac8 c0000001fad91600 c0000001f6e74ab0 GPR24: c0000001f7d23f80 0000000000000000 0000000000000002 000000006a170000 GPR28: 000000000000000c c0000001f584c8d0 d000000003925180 c0000001f6e875c8 NIP [c00000000037d41c] .gen_pool_free+0x6c/0xf8 LR [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] Call Trace: [c0000001f350b0d0] [c0000001f350b180] 0xc0000001f350b180 (unreliable) [c0000001f350b170] [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] [c0000001f350b210] [d00000000390fd70] .dealloc_sq+0x90/0xb0 [iw_cxgb4] [c0000001f350b280] [d00000000390fe08] .destroy_qp+0x78/0xf8 [iw_cxgb4] [c0000001f350b310] [d000000003912738] .c4iw_destroy_qp+0x208/0x2d0 [iw_cxgb4] [c0000001f350b460] [d000000003861874] .ib_destroy_qp+0x5c/0x130 [ib_core] [c0000001f350b510] [d0000000039911bc] .ib_uverbs_cleanup_ucontext+0x174/0x4f8 [ib_uverbs] [c0000001f350b5f0] [d000000003991568] .ib_uverbs_close+0x28/0x70 [ib_uverbs] [c0000001f350b670] [c0000000001e7b2c] .__fput+0xdc/0x278 [c0000001f350b720] [c0000000001a9590] .remove_vma+0x68/0xd8 [c0000001f350b7b0] [c0000000001a9720] .exit_mmap+0x120/0x160 [c0000001f350b8d0] [c0000000000af330] .mmput+0x80/0x160 [c0000001f350b960] [c0000000000b5d0c] .exit_mm+0x1ac/0x1e8 [c0000001f350ba10] [c0000000000b8154] .do_exit+0x1b4/0x4b8 [c0000001f350bad0] [c0000000000b84b0] .do_group_exit+0x58/0xf8 [c0000001f350bb60] [c0000000000ce9f4] .get_signal_to_deliver+0x2f4/0x5d0 [c0000001f350bc60] [c000000000017ee4] .do_signal_pending+0x6c/0x3e0 [c0000001f350bdb0] [c0000000000182cc] .do_signal+0x74/0x78 [c0000001f350be30] [c000000000009e74] do_work+0x24/0x28 Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Emil Goode <emilgoode@gmail.com> Acked-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Stefan Bader authored
commit e5195c1f upstream. Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Cohen authored
commit 07c449bb upstream. When compiling kernel with -jN (N > 1), all warning/error messages printed while openssl is generating key pair may get mixed dots and other symbols openssl sends to stderr. This patch makes sure openssl logs go to default stdout. Example of the garbage on stderr: crypto/anubis.c:581: warning: ‘inter’ is used uninitialized in this function Generating a 4096 bit RSA private key ......... drivers/gpu/drm/i915/i915_gem_gtt.c: In function ‘gen6_ggtt_insert_entries’: drivers/gpu/drm/i915/i915_gem_gtt.c:440: warning: ‘addr’ may be used uninitialized in this function .net/mac80211/tx.c: In function ‘ieee80211_subif_start_xmit’: net/mac80211/tx.c:1780: warning: ‘chanctx_conf’ may be used uninitialized in this function ..drivers/isdn/hardware/mISDN/hfcpci.c: In function ‘hfcpci_softirq’: .....drivers/isdn/hardware/mISDN/hfcpci.c:2298: warning: ignoring return value of ‘driver_for_each_device’, declared with attribute warn_unused_result Signed-off-by:
David Cohen <david.a.cohen@intel.com> Reviewed-by:
mark gross <mark.gross@intel.com> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Theodore Ts'o authored
commit 3f8a6411 upstream. Addresses-Red-Hat-Bugzilla: #913245 Reported-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
Lingzhu Xiang <lxiang@redhat.com> Signed-off-by:
-
Hans Schillstrom authored
commit f7a1dd6e upstream. The reason for this patch is crash in kmemdup caused by returning from get_callid with uniialized matchoff and matchlen. Removing Zero check of matchlen since it's done by ct_sip_get_header() BUG: unable to handle kernel paging request at ffff880457b5763f IP: [<ffffffff810df7fc>] kmemdup+0x2e/0x35 PGD 27f6067 PUD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: xt_state xt_helper nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_mangle xt_connmark xt_conntrack ip6_tables nf_conntrack_ftp ip_vs_ftp nf_nat xt_tcpudp iptable_mangle xt_mark ip_tables x_tables ip_vs_rr ip_vs_lblcr ip_vs_pe_sip ip_vs nf_conntrack_sip nf_conntrack bonding igb i2c_algo_bit i2c_core CPU 5 Pid: 0, comm: swapper/5 Not tainted 3.9.0-rc5+ #5 /S1200KP RIP: 0010:[<ffffffff810df7fc>] [<ffffffff810df7fc>] kmemdup+0x2e/0x35 RSP: 0018:ffff8803fea03648 EFLAGS: 00010282 RAX: ffff8803d61063e0 RBX: 0000000000000003 RCX: 0000000000000003 RDX: 0000000000000003 RSI: ffff880457b5763f RDI: ffff8803d61063e0 RBP: ffff8803fea03658 R08: 0000000000000008 R09: 0000000000000011 R10: 0000000000000011 R11: 00ffffffff81a8a3 R12: ffff880457b5763f R13: ffff8803d67f786a R14: ffff8803fea03730 R15: ffffffffa0098e90 FS: 0000000000000000(0000) GS:ffff8803fea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff880457b5763f CR3: 0000000001a0c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/5 (pid: 0, threadinfo ffff8803ee18c000, task ffff8803ee18a480) Stack: ffff8803d822a080 000000000000001c ffff8803fea036c8 ffffffffa000937a ffffffff81f0d8a0 000000038135fdd5 ffff880300000014 ffff880300110000 ffffffff150118ac ffff8803d7e8a000 ffff88031e0118ac 0000000000000000 Call Trace: <IRQ> [<ffffffffa000937a>] ip_vs_sip_fill_param+0x13a/0x187 [ip_vs_pe_sip] [<ffffffffa007b209>] ip_vs_sched_persist+0x2c6/0x9c3 [ip_vs] [<ffffffff8107dc53>] ? __lock_acquire+0x677/0x1697 [<ffffffff8100972e>] ? native_sched_clock+0x3c/0x7d [<ffffffff8100972e>] ? native_sched_clock+0x3c/0x7d [<ffffffff810649bc>] ? sched_clock_cpu+0x43/0xcf [<ffffffffa007bb1e>] ip_vs_schedule+0x181/0x4ba [ip_vs] ... Signed-off-by:
Hans Schillstrom <hans@schillstrom.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Peter Zijlstra authored
commit 7cc23cd6 upstream. We should always have proper privileges when requesting kernel data. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andi Kleen <ak@linux.intel.com> Cc: eranian@google.com Link: http://lkml.kernel.org/r/20130503121256.230745028@chello.nl [ Fix build error reported by fengguang.wu@intel.com, propagate error code back. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/n/tip-v0x9ky3ahzr6nm3c6ilwrili@git.kernel.orgSigned-off-by:
-
Peter Zijlstra authored
commit 6e15eb3b upstream. The LBR 'from' adddress is under full userspace control; ensure we validate it before reading from it. Note: is_module_text_address() can potentially be quite expensive; for those running into that with high overhead in modules optimize it using an RCU backed rb-tree. Reported-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Peter Zijlstra authored
commit 741a698f upstream. Errata BV98 states that all MEM_*_RETIRED events corrupt the counter value of the SMT sibling's counters. Blacklist these events Reported-by:
-
Jan-Simon Möller authored
commit 1b0dac2a upstream. The variable name events_group is already in used and led to a compilation error when using clang to build the Linux Kernel . The fix is just to rename the var. No functional change. Please apply. Fix suggested in discussion by PaX Team <pageexec@freemail.hu> Signed-off-by:
Jan-Simon Möller <dl9pf@gmx.de> Cc: rostedt@goodmis.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/1367316153-14808-1-git-send-email-dl9pf@gmx.deSigned-off-by:
-
Vince Weaver authored
commit 9a6bc143 upstream. According to Intel Vol3b 18.9, the IvyBridge model 58 uncore is the same as that of SandyBridge. I've done some simple tests and with this patch things seem to work on my mac-mini. Signed-off-by:
Vince Weaver <vincent.weaver@maine.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Stephane Eranian <eranian@gmail.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1304291549320.15827@vincent-weaver-1.um.maine.eduSigned-off-by:
-
Benjamin Herrenschmidt authored
commit 13f85203 upstream. Some ancient pHyp versions used to create a 8 bytes local-mac-address property in the device-tree instead of a 6 bytes one for veth. The Linux driver code to deal with that is an insane hack which also happens to break with some choices of MAC addresses in qemu by testing for a bit in the address rather than just looking at the size of the property. Sanitize this by doing the latter instead. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Poirier authored
commit edb749f4 upstream. Fixes the memory leak of struct jump_key allocated in get_prompt_str() Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Tested-by:
"Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by:
-
Joerg Roedel authored
commit 197887f0 upstream. Fixes a lockdep warning. Reviewed-by:
Shuah Khan <shuahkhan@gmail.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Naoya Horiguchi authored
commit af73e4d9 upstream. The current kernel returns -EINVAL unless a given mmap length is "almost" hugepage aligned. This is because in sys_mmap_pgoff() the given length is passed to vm_mmap_pgoff() as it is without being aligned with hugepage boundary. This is a regression introduced in commit 40716e29 ("hugetlbfs: fix alignment of huge page requests"), where alignment code is pushed into hugetlb_file_setup() and the variable len in caller side is not changed. To fix this, this patch partially reverts that commit, and adds alignment code in caller side. And it also introduces hstate_sizelog() in order to get proper hstate to specified hugepage size. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881 [akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n] Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-by: <iceman_dvd@yahoo.com> Cc: Steven Truelove <steven.truelove@utoronto.ca> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Suman Anna authored
commit b9777859 upstream. Fix this: warning: (VIRTIO_PCI && VIRTIO_MMIO && REMOTEPROC && RPMSG) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION) Signed-off-by:
Suman Anna <s-anna@ti.com> [edit commit log] Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Suman Anna authored
commit 397944df upstream. Fix this: warning: (VIRTIO_PCI && VIRTIO_MMIO && REMOTEPROC && RPMSG) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION) Signed-off-by:
-
David Jeffery authored
commit ce8a5dbd upstream. When checking if an autofs mount point is busy it isn't sufficient to only check if it's a mount point. For example, if the mount of an offset mountpoint in a tree is denied for this host by its export and the dentry becomes a process working directory the check incorrectly returns the mount as not in use at expire. This can happen since the default when mounting within a tree is nostrict, which means ingnore mount fails on mounts within the tree and continue. The nostrict option is meant to allow mounting in this case. Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Axel Lin authored
commit 563861cd upstream. The logic to check return value of clk_enable() and clk_prepare() is reversed, fix it. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by:
-
Vaidyanathan Srinivasan authored
commit 7122beee upstream. The following commit breaks numa distance setup for old powerpc systems that use form0 encoding in device tree. commit 41eab6f8 powerpc/numa: Use form 1 affinity to setup node distance Device tree node /rtas/ibm,associativity-reference-points would index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or form1 encoding detected by ibm,architecture-vec-5 property. All modern systems use form1 and current kernel code is correct. However, on older systems with form0 encoding, the numa distance will get hard coded as LOCAL_DISTANCE for all nodes. This causes task scheduling anomaly since scheduler will skip building numa level domain (topmost domain with all cpus) if all numa distances are same. (value of 'level' in sched_init_numa() will remain 0) Prior to the above commit: ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE) Restoring compatible behavior with this patch for old powerpc systems with device tree where numa distance are encoded as form0. Signed-off-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
commit c2fd22df upstream. Make sure that current->thread.reg exists before we deference it in flush_hash_page. Signed-off-by:
Michael Neuling <mikey@neuling.org> Reported-by:
John J Miller <millerjo@us.ibm.com> Signed-off-by:
-
Anton Blanchard authored
commit 73d2fb75 upstream. POWER8 allows read and write of the DSCR in userspace. We added kernel emulation so applications could always use the instructions regardless of the CPU type. Unfortunately there are two SPRs for the DSCR and we only added emulation for the privileged one. Add code to match the non privileged one. A simple test was created to verify the fix: http://ozlabs.org/~anton/junkcode/user_dscr_test.c Without the patch we get a SIGILL and it passes with the patch. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Stefano Stabellini authored
commit 2798ba7d upstream. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by:
Ian Campbell <ian.camjpbell@citrix.com> Signed-off-by:
-
- 08 May, 2013 1 commit
-
-
Greg Kroah-Hartman authored
-
