- 19 May, 2011 2 commits
-
-
Madis Janson authored
This fixes the input layer beep not working on some EeePC 1000 models by adding the subsystem id into whitelist. Otherwise the corresponding ALSA mixer is not enabled and stays muted, resulting in no console beep. Signed-off-by: Madis Janson <madis@cyber.ee> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Henningsson authored
Just as for headphones and microphone jacks, this patch adds reporting of HDMI jack status through the input layer. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 18 May, 2011 3 commits
-
-
Kailang Yang authored
Change power control register to default. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
Compatible with ALC269. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
These are compatible with ALC882 codec. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 17 May, 2011 12 commits
-
-
Takashi Iwai authored
AMD Hudson controllers give noisy outputs when the buffer data is rewritten on the fly as PulseAudio does. This seems fixed by the snoop bit enabled just like ATI chipset. Also, disable 64bit DMA as now, to be sure. We can revisit this later. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Similar process like in patch_realtek.c and patch_sigmatel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When a docking-station has a line-in jack, we can handle it also as a detectable jack just like mic-in. This will improve the usability of HP laptops with a docking-station. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
In addition to the normal mic jack, the mic (or line-in) jack on the docking-station is checked also as a candidate for auto-selection. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Also replace more open-codes with this function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
In addition to the normal external mic jack, check also the mic jack on a docking-station as well, and select the input source appropriately. The similar functionality was already implemented in patch_sigmatel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
spec->automute_lines shouldn't be set unless the line-detection is available. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Replace the open-code with get_wcaps_type() macro. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Replaced the open-code with the new helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Implement the same functionality as Realtek's auto-mute mode control. Now Conexant auto-parser can also mutes line-out and provide the enum control for different automute behavior. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Use a struct instead of each array for managing input-source info for auto-parser. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 16 May, 2011 4 commits
-
-
David Henningsson authored
There are no signs of a dmic at node 0x0b, so the user is left with an additional internal mic which does not exist. This commit removes that non-existing mic. Cc: stable@kernel.org (2.6.32+) BugLink: http://bugs.launchpad.net/bugs/731706Reported-by: James Page <james.page@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Still experimental. Not enabled as default unless model=auto is passed. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Check the routing more exactly for avoiding the duplicated controls for the very same effect for multiple capture routes in Conexant auto-parser. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When the intermediate selector widget in the capture path provides the boost volume, create the corresponding volume control. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 May, 2011 3 commits
-
-
Takashi Iwai authored
Just for safety reason (for avoiding any possible regressions), don't enable auto-parser as default for cxt5045 and 5051, as well as 5047. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
It can (must for some) be used for all Conexnat codecs safely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Instead of giving fixed arrays, look for ADC nids dynamically in the tree in Conexant auto-parser code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 13 May, 2011 8 commits
-
-
Takashi Iwai authored
Similarly like other Conexant codecs, now model=auto is supported for cxt5047. But the auto-parser mode isn't activated as default yet, since BIOS pin-configs seem often broken on machines with this codec. User need to pass model=auto explicitly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Handle not only a single-depth input-route but two-level depth routes (PIN->MUX->ADC), too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Keep the registered input-pins in imux_pins[], and fix the inconsistent use of sepc->auto_mic_ext. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Extend the existing auto-parser for CX2064x for cxt5051 codec. Now the auto-parser supports ADC-switching for this codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some codecs have no mute caps in audio I/O widgets. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Instead of keeping always EAPD on, turn on/off appropriately at jack plugging in Conexant auto-parser mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The wrong id is assigned for external/internal mics in the auto-mic selection parser. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 May, 2011 1 commit
-
-
Takashi Iwai authored
AMD chipsets often behave pretty badly regarding the DMA position reporting. It results in the bad quality audio recording. Using position_fix=3 works well in general for them, so let's enable it as default for AMD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 03 May, 2011 1 commit
-
-
Raymond Yau authored
Fix NULL-dereference when try to use alt_playback since those codecs which support multistreaming playback usually have more than 1 adc but the driver should create alt_capture when spec->stream_analog_alt_capture is also defined. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 02 May, 2011 6 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
The check of chained fixup list entry was done against the wrong element. A stupid mistake during refactoring. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-