- 01 Jul, 2019 40 commits
-
-
Nishka Dasgupta authored
Remove unused function PHY_CalculateBitShift. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nishka Dasgupta authored
Remove unused function PHY_RFShadowRecorverFlagSetAll. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function PHY_RFShadowRefresh. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function rtl8723b_set_rssi_cmd as all it does is call rtl8723b_set_FwRssiSetting_cmd. Rename rtl8723b_set_FwRssiSetting_cmd to rtl8723b_set_rssi_cmd and change its type from static to non-static to maintain compatibility with call sites. Issue found with Coccinelle. Signed-off-by:
-
Hariprasad Kelam authored
Remove set but unsed variable pHalData in below functions _InitOperationMode, SetHwReg8723BS. Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by:
-
Hariprasad Kelam authored
Remove variable rtStatus and return phy_RF6052_Config_ParaFile function directly Signed-off-by:
-
Hariprasad Kelam authored
Remove set but unsed variable pHalData in hw_var_set_mlme_join function Signed-off-by:
-
Hariprasad Kelam authored
Remove set but unsed variable pHalData in rtl8723b_set_FwRsvdPagePkt function Signed-off-by:
-
Nishka Dasgupta authored
Remove function r8712_dequeue_cmd as all it does is call _dequeue_cmd. Rename _dequeue_cmd to r8712_dequeue_cmd and change its type from static to non-static to maintain compatibility with call sites. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Merge function _enqueue_cmd into function r8712_enqueue_cmd as _enqueue_cmd is only called by r8712_enqueue_cmd, and then only once. Signed-off-by:
-
Nishka Dasgupta authored
Change call site of function r8712_xmit_resource_alloc to add a check for its return value. Change return values of r8712_xmit_resource_alloc from _SUCCESS/_FAIL to 0/-ENOMEM. Signed-off-by:
-
Nishka Dasgupta authored
Add check for the return value of function _r8712_init_sta_priv at call site. Change return values of the function from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Change return type of the function from u32 to int to enable return of -ENOMEM. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of function _r8712_free_sta_priv from u32 to void as it always returns _SUCCESS and this return value is never used. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of function mp_start_test() from _SUCCESS/_FAIL to 0/-ENOMEM and modify call sites accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of function r8712_parse_wpa2_ie from _SUCCESS/_FAIL to 0/-EINVAL. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of function r8712_parse_wpa_ie from _SUCCESS/_FAIL to 0/-EINVAL. Modify call site accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of r8712_getrfreg_cmd from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Modify call site accordingly. Signed-off-by:
-
Fabian Krueger authored
The unconditioned jump will prohibit to ever reach the break-statement. Deleting this needless statement, the code becomes more understandable. Signed-off-by:
Fabian Krueger <fabian.krueger@fau.de> Signed-off-by:
Michael Scheiderer <michael.scheiderer@fau.de> Cc: <linux-kernel@i4.cs.fau.de> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Fabian Krueger authored
Instead of using the function name hard coded as string, using __func__ and the '%s'-placeholder will always give the current name of the function. When renaming a function, the debugging-messages won't have to be rewritten. Signed-off-by:
-
Fabian Krueger authored
Replaced 'unsigned' with it's equivalent 'unsigned int' to reduce confusion while reading the code. Signed-off-by:
-
Fabian Krueger authored
Replaced __attribute__((packed)) with __packed. Both ways of attributing are equivalent, but being shorter, __packed should be preferred. This refactoring makes the core more readable. Signed-off-by:
-
Fabian Krueger authored
After the declarations in a function, there should be a blank line, so that the declaration part is visibly separated from the rest. This refactoring makes the code more readable. Signed-off-by:
-
Fabian Krueger authored
To fix some checkpatch-warnings some lines of this module had to be shortened so that they do not exceed 80 characters per line. This refactoring makes the code more readable. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function dm_backup_dynamic_mechanism_state. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Change type of function rtl8192_rx_initiate from int to void as it always returns 0 and this value is never used. Signed-off-by:
-
Hariprasad Kelam authored
pHalData is not being used in halbtcoutsrc_LeaveLowPower. So remove the same. Signed-off-by:
-
Hariprasad Kelam authored
fix below issues reported by checkpatch CHECK: Using comparison to true is error prone CHECK: Using comparison to false is error prone Signed-off-by:
-
Dave Stevenson authored
The V4L2 control API was expanded to take 64 bit values in commit 0ba2aeb6 (Apr 16 2014), but as this driver wasn't in the mainline kernel at that point this was overlooked. Update to use 64 bit values. This also fixes a couple of warnings in 64 bit builds. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Dave Stevenson authored
Fixes a v4l2-compliance failure v4l2-test-buffers.cpp(415): g_field() == V4L2_FIELD_ANY The driver only ever produces progresive frames, so field should always be set to V4L2_FIELD_NONE. Signed-off-by:
-
Dave Stevenson authored
Fixes a v4l2-compliance failure when passed a buffer that is too small. queue_setup wasn't handling the case where *nplanes != 0, as used from CREATE_BUFS and requiring the driver to sanity check the provided buffer parameters. It was assuming that it was always being used in the REQBUFS case where it provides the buffer properties. Signed-off-by:
-
Dave Stevenson authored
RGB3/BGR3 end up being 3 bytes per pixel, which meant that the alignment code ended up trying to align using bitmasking with a mask of 96. That doesn't work, so switch to an arithmetic alignment for those formats. Signed-off-by:
-
Dave Stevenson authored
Fixes up a checkpatch error "Avoid using bool structure members because of possible alignment issues". Signed-off-by:
-
Dave Stevenson authored
Remove a todo which has been done. Remove a template line that was redundant. Make a comment clearer as to the non-obvious meaning of a field. Signed-off-by:
-
Dave Stevenson authored
With V4L2_CID_COLORFX_CBCR calling ctrl_set_colfx it was incorrectly assigning the colour values to the enable field of dev->colourfx instead of the u and v fields. Correct the assignments. Reported as a Coverity issue Detected by CoverityScan CID#1419711 ("Unused value") Reported-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dave Stevenson authored
Controls of type MMAL_CONTROL_TYPE_STD_MENU call v4l2_ctrl_new_std_menu with a max value and a mask. The max value is one of the defined values for the control, however in the config array there are several entries where raw numbers have been used instead. Replace these with the appropriate enum. Signed-off-by:
-
Dave Stevenson authored
Fixes up all the checkpatch error "line over 80 characters" in mmal-parameters.h Signed-off-by:
-
Dave Stevenson authored
Clear checkpatch complaints of "multiple assignments should be avoided" Signed-off-by:
-
Dave Stevenson authored
Most of the headers use ifndef FOO_H, whilst mmal-parameters.h used ifndef __FOO_H. Revise mmal-parameters.h to drop the underscores and make the headers all consistent. Signed-off-by:
-
Dave Stevenson authored
mmal-common.h and mmal-msg.h didn't have the normal ifndef FOO / define FOO / endif protection to stop it being included multiple times. Add it. Signed-off-by:
-
Dave Stevenson authored
Set the sequence number in vb2_v4l2_buffer mainly so the latest v4l2-ctl reports the frame rate correctly. Signed-off-by:
-
