- 22 May, 2019 22 commits
-
-
Clément Péron authored
This add the H6 mali compatible in the dt-bindings to later support specific implementation. Signed-off-by:
Clément Péron <peron.clem@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sean Paul authored
Backmerging 5.2-rc1 to -misc-next for robher Signed-off-by:Sean Paul <seanpaul@chromium.org>
-
Uma Shankar authored
Added unpack function for DRM infoframe for dynamic range and mastering infoframe readout. v2: Addressed Ville's review comments. Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
ADD HLG EOTF to the list of EOTF transfer functions supported. Hybrid Log-Gamma (HLG) is a high dynamic range (HDR) standard. HLG defines a nonlinear transfer function in which the lower half of the signal values use a gamma curve and the upper half of the signal values use a logarithmic curve. v2: Rebase v3: Fixed a warning message v4: Addressed Shashank's review comments v5: Addressed Jonas Karlman's review comment and dropped the i915 tag from header. Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-8-git-send-email-uma.shankar@intel.com
-
Uma Shankar authored
Enable Dynamic Range and Mastering Infoframe for HDR content, which is defined in CEA 861.3 spec. The metadata will be computed based on blending policy in userspace compositors and passed as a connector property blob to driver. The same will be sent as infoframe to panel which support HDR. Added the const version of infoframe for DRM metadata for HDR. v2: Rebase and added Ville's POC changes. v3: No Change v4: Addressed Shashank's review comments and merged the patch making drm infoframe function arguments as constant. v5: Rebase v6: Fixed checkpatch warnings with --strict option. Addressed Shashank's review comments and added his RB. v7: Addressed Brian Starkey's review comments. Merged 2 patches into one. v8: Addressed Jonas Karlman review comments. v9: Addressed Jonas Karlman review comments. v10: Addressed Ville's review comments. v11: Added BUILD_BUG_ON and sizeof instead of magic numbers as per Ville's comments. Signed-off-by:
-
Uma Shankar authored
HDR metadata block is introduced in CEA-861.3 spec. Parsing the same to get the panel's HDR metadata. v2: Rebase and added Ville's POC changes to the patch. v3: No Change v4: Addressed Shashank's review comments v5: Addressed Shashank's comment and added his RB. v6: Addressed Jonas Karlman review comments. v7: Adressed Ville's review comments and fixed the issue with length handling. v8: Put the length check as per the convention followed in existing code, as suggested by Ville. Signed-off-by:
-
Jonas Karlman authored
This adds reference count for HDR metadata blob, handled as part of duplicate and destroy connector state functions. v2: Removed the hdr_metadata_changed initialization as the variable is dropped and not required. Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
-
Uma Shankar authored
This patch adds a blob property to get HDR metadata information from userspace. This will be send as part of AVI Infoframe to panel. It also implements get() and set() functions for HDR output metadata property.The blob data is received from userspace and saved in connector state, the same is returned as blob in get property call to userspace. v2: Rebase and modified the metadata structure elements as per Ville's POC changes. v3: No Change v4: Addressed Shashank's review comments v5: Rebase. v6: Addressed Brian Starkey's review comments, defined new structure with header for dynamic metadata scalability. Merge get/set property functions for metadata in this patch. v7: Addressed Jonas Karlman review comments and defined separate structure for infoframe to better align with CTA 861.G spec. Added Shashank's RB. v8: Addressed Ville's review comments. Moved sink metadata structure out of uapi headers as suggested by Jonas Karlman. v9: Rebase and addressed Jonas Karlman review comments. v10: Addressed Ville's review comments, dropped the metdata_changed state variable as its not needed anymore. Signed-off-by:
-
Clément Péron authored
Allwinner H6 has an ARM Mali-T720 MP2 which required a bus_clock. Add an optional bus_clock at the init of the panfrost driver. Signed-off-by:
-
Icenowy Zheng authored
Some SoCs adds a bus clock gate to the Mali Midgard GPU. Add the binding for the bus clock. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
-
Christian König authored
That is now done by the DMA-buf helpers instead. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.kernel.org/patch/10943055/
-
Christian König authored
To allow a smooth transition from pinning buffer objects to dynamic invalidation we first start to cache the sg_table for an attachment. v2: keep closer to the DRM implementation Signed-off-by:
-
Sam Ravnborg authored
Drop remaining uses of the deprecated drmP.h in gma500 Replaced drmp.h with forward declarations or include files as relevant. Moved all include files to blocks in following order: \#include <linux/*> \#include <asm/*> \#include <drm/*> \#include "" And within each block sort the include files alphabetically. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190519195526.3422-6-sam@ravnborg.org
-
Sam Ravnborg authored
The DRM_UDELAY wrapper from drm_os_linux.h is used in a few places, all other places calls udelay() with no wrapper. There is no reason to continue to use this wrapper - so drop it and direct call udelay(). Signed-off-by:
-
Sam Ravnborg authored
Add proper forward declarations to minimize dependencies on other header files. Just add enough that we can safely include all header files in alphabetically order in relevant files. Signed-off-by:
-
Sam Ravnborg authored
Drop use of drmp.h from all header files in drm/gma500. Fix fallout in all files. In some cases moved include lines and sorted them too. With drmP.h removed from all header files it can now be removed from each .c file without any further dependencies Signed-off-by:
-
Sam Ravnborg authored
The header file gma_drm.h is empty so remove it and drop all uses of the file. Signed-off-by:
-
Thomas Zimmermann authored
We may not call drm_gem_vram_{pin,unpin}_locked() with an unlocked BO. Now test for this. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Thomas Zimmermann authored
To align with the rest of DRM terminology, the GEM VRAM helpers now use lock and unlock in places where reserve and unreserve where used before. All callers have been adapted. Signed-off-by:
-
Thomas Zimmermann authored
The push-to-system function forces a buffer out of video RAM. This decision should rather be made by the memory manager. By replacing the function with calls to the kunmap and unpin functions, the buffer's memory becomes available, but the buffer remains in VRAM until it's evicted by a pin operation. This patch replaces the remaining instances of drm_gem_vram_push_to_system() in ast and mgag200, and removes the function from DRM. Signed-off-by:
-
Matthias Kaehlcke authored
The GPU can be used as a thermal cooling device, add an optional '#cooling-cells' property. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190516172510.181473-1-mka@chromium.org
-
Erico Nunes authored
After "5918045c drm/scheduler: rework job destruction", jobs are only deleted when the timeout handler is able to be cancelled successfully. In case no timeout handler is running (timeout == MAX_SCHEDULE_TIMEOUT), job cleanup would be skipped which may result in memory leaks. Add the handling for the (timeout == MAX_SCHEDULE_TIMEOUT) case in drm_sched_cleanup_jobs. Signed-off-by:
Erico Nunes <nunes.erico@gmail.com> Signed-off-by:
-
- 21 May, 2019 4 commits
-
-
Maxime Ripard authored
We introduced new functions in the commit bf39607c ("drm/fourcc: Pass the format_info pointer to drm_format_plane_width/height") based on previous ones but with a slightly different prototype. However, the documentation wasn't changed to reflect that change. Fixes: bf39607c ("drm/fourcc: Pass the format_info pointer to drm_format_plane_width/height") Reported-by:
kbuild test robot <lkp@intel.com> Reviewed-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190521110906.15268-1-maxime.ripard@bootlin.com
-
Christian König authored
He unfortunately doesn't work for AMD any more. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/302519/?series=60097&rev=1
-
Erico Nunes authored
After "5918045c drm/scheduler: rework job destruction", lima started to leak memory due to buffers not being destroyed after job execution in the drm scheduler. This started happening because the drm scheduler only destroyed buffers after cancelling the job timeout handler, and for lima this handler was never started as lima specified a MAX_SCHEDULE_TIMEOUT timeout. Lima seems to run well in its current state with a real timeout, so to make it more aligned with the other drivers from now on, let's use a real default timeout. This also fixes the observed memory leaks. The 500ms value was chosen as it is the current value for all other embedded gpu drivers using drm sched. Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190520224229.21111-1-nunes.erico@gmail.com
-
Sam Bobroff authored
When unloading the bochs-drm driver, a warning message is printed by drm_mode_config_cleanup() because a reference is still held to one of the drm_connector structs. Correct this by calling drm_atomic_helper_shutdown() in bochs_pci_remove(). Fixes: 6579c395 ("drm/bochs: atomic: switch planes to atomic, wire up helpers.") Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Link: http://patchwork.freedesktop.org/patch/msgid/93b363ad62f4938d9ddf3e05b2a61e3f66b2dcd3.1558416473.git.sbobroff@linux.ibm.comSigned-off-by:
-
- 20 May, 2019 9 commits
-
-
kbuild test robot authored
drivers/gpu/drm/bochs/bochs_mm.c:19:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: b3a25b9a ("drm/bochs: Convert bochs driver to VRAM MM") CC: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Maxime Ripard authored
drm_format_info_plane_cpp() basically just returns the cpp array content found in the drm_format_info structure. Since it's pretty trivial, let's remove the function and have the users use the array directly Suggested-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Maxime Ripard authored
drm_get_format_info directly calls into drm_format_info, but takes directly a struct drm_mode_fb_cmd2 pointer, instead of the fourcc directly. It's shorter to not dereference it, and we can customise the behaviour at the driver level if we want to, so let's switch to it where it makes sense. Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
-
Maxime Ripard authored
So far, the drm_format_plane_height/width functions were operating on the format's fourcc and was doing a lookup to retrieve the drm_format_info structure and return the cpp. However, this is inefficient since in most cases, we will have the drm_format_info pointer already available so we shouldn't have to perform a new lookup. Some drm_fourcc functions also already operate on the drm_format_info pointer for that reason, so the API is quite inconsistent there. Let's follow the latter pattern and remove the extra lookup while being a bit more consistent. In order to be extra consistent, also rename that function to drm_format_info_plane_cpp and to a static function in the header to match the current policy. The parameters order have also be changed to match the other functions prototype. Reviewed-by:
-
Maxime Ripard authored
So far, the drm_format_plane_cpp function was operating on the format's fourcc and was doing a lookup to retrieve the drm_format_info structure and return the cpp. However, this is inefficient since in most cases, we will have the drm_format_info pointer already available so we shouldn't have to perform a new lookup. Some drm_fourcc functions also already operate on the drm_format_info pointer for that reason, so the API is quite inconsistent there. Let's follow the latter pattern and remove the extra lookup while being a bit more consistent. In order to be extra consistent, also rename that function to drm_format_info_plane_cpp and to a static function in the header to match the current policy. Reviewed-by:
-
Maxime Ripard authored
drm_format_horz_chroma_subsampling and drm_format_vert_chroma_subsampling are basically a lookup in the drm_format_info table plus an access to the hsub and vsub fields of the appropriate entry. Most drivers are using this function while having access to the entry already, which means that we will perform an unnecessary lookup. Removing the call to these functions is therefore more efficient. Some drivers will not have access to that entry in the function, but in this case the overhead is minimal (we just have to call drm_format_info() to perform the lookup) and we can even avoid multiple, inefficient lookups in some places that need multiple fields from the drm_format_info structure. This is amplified by the fact that most of the time the callers will have to retrieve both the vsub and hsub fields, meaning that they would perform twice the lookup. Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Maxime Ripard authored
drm_format_num_planes() is basically a lookup in the drm_format_info table plus an access to the num_planes field of the appropriate entry. Most drivers are using this function while having access to the entry already, which means that we will perform an unnecessary lookup. Removing the call to drm_format_num_planes is therefore more efficient. Some drivers will not have access to that entry in the function, but in this case the overhead is minimal (we just have to call drm_format_info() to perform the lookup) and we can even avoid multiple, inefficient lookups in some places that need multiple fields from the drm_format_info structure. Reviewed-by:
-
Maxime Ripard authored
The Rockchip VOP driver has a function, scl_vop_cal_scl_fac, that will lookup the drm_format_info structure from the fourcc passed to it by its caller. However, its only caller already derefences the drm_format_info structure it has access to to retrieve that fourcc. Change the prototype of that function to pass the drm_format_info structure directly, removing the need for an extra lookup. Reviewed-by:
Sean Paul <sean@poorly.run> Suggested-by:
-
Sabyasachi Gupta authored
Remove duplicate header which is included twice Signed-off-by:
Sabyasachi Gupta <sabyasachi.linux@gmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/5cdd8109.1c69fb81.6e003.b84b@mx.google.com
-
- 19 May, 2019 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifsLinus Torvalds authored
Pull UBIFS fixes from Richard Weinberger: - build errors wrt xattrs - mismerge which lead to a wrong Kconfig ifdef - missing endianness conversion * tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: Convert xattr inum to host order ubifs: Use correct config name for encryption ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR
-
Linus Torvalds authored
Merge yet more updates from Andrew Morton: "A few final bits: - large changes to vmalloc, yielding large performance benefits - tweak the console-flush-on-panic code - a few fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: panic: add an option to replay all the printk message in buffer initramfs: don't free a non-existent initrd fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro mm/vmalloc.c: keep track of free blocks for vmap allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption - exclude tracked files from .gitignore - re-enable -Wint-in-bool-context warning - refactor samples/Makefile - stop building immediately if syncconfig fails - do not sprinkle error messages when $(CC) does not exist - move arch/alpha/defconfig to the configs subdirectory - remove crappy header search path manipulation - add comment lines to .config to clarify the end of menu blocks - check uniqueness of module names (adding new warnings intentionally) * tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits) kconfig: use 'else ifneq' for Makefile to improve readability kbuild: check uniqueness of module names kconfig: Terminate menu blocks with a comment in the generated config kbuild: add LICENSES to KBUILD_ALLDIRS kbuild: remove 'addtree' and 'flags' magic for header search paths treewide: prefix header search paths with $(srctree)/ media: prefix header search paths with $(srctree)/ media: remove unneeded header search paths alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig kbuild: terminate Kconfig when $(CC) or $(LD) is missing kbuild: turn auto.conf.cmd into a mandatory include file .gitignore: exclude .get_maintainer.ignore and .gitattributes kbuild: add all Clang-specific flags unconditionally kbuild: Don't try to add '-fcatch-undefined-behavior' flag kbuild: add some extra warning flags unconditionally kbuild: add -Wvla flag unconditionally arch: remove dangling asm-generic wrappers samples: guard sub-directories with CONFIG options kbuild: re-enable int-in-bool-context warning MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux* ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "Some I2C core API additions which are kind of simple but enhance error checking for users a lot, especially by returning errno now. There are wrappers to still support the old API but it will be removed once all users are converted" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: add device-managed version of i2c_new_dummy i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
-
