- 29 Jun, 2016 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second round of new iio device support, features and cleanups in the 4.8 cycle Firstly some contact detail updates: * NXP took over freescale. Update the mma8452 header to reflect this. * Martin Kepplinger email address change in mma8452 header. * Adriana Reus has changed email address. Update .mailmap. * Matt Ranostay has changed email address. Update .mailmap. New Device Support * max1363 - add the missing i2c_device_ids for a couple of parts so they can actually be used. * ms5867 - add device ids for ms5805 and ms5837 parts. New Features * ad5755 - DT support. This one was a bit controversial and under review for a long time. Still no one could come up with a better solution. * stx104 - add gpio support * ti-adc081c - Add ACPI device ID matching. Core changes * Refuse to register triggers with duplicate names. There is no way to distinguish between them so this makes no sense. A few drivers do not generate unique names for each instance of the device present. We can't fix this without changing ABI so leave them and wait for someone to actually take the rare step of two identical accelerometers on the same board. * buffer-dma - use ARRAY_SIZE in a few appropriate locations. Tools * Fix the fact that the --trigger-num option in generic_buffer didn't allow 0 which is perfectly valid in the ABI. Cleanups * as3935 - improve error reporting. - remove redundant zeroing of a field in iio_priv. * gp2ap020a00f - use the iio_device_claim_*_mode helpers rather than open coding locking around mode changes. * isl29125 - use the iio_device_claim_*_mode helpers rather than open coding locking. * lidar - use the iio_device_claim_*_mode helpers rather than open coding locking. * mma8452 - more detail in devices supported description in comments (addresses and similar) * sca3000 - add a missing error check. * tcs3414 - use the iio_device_claim_*_mode helpers rather than open coding locking. * tcs3472 - use the iio_device_claim_*_mode helpers rather than open coding locking.
-
- 27 Jun, 2016 21 commits
-
-
Sean Nyekjaer authored
Signed-off-by:
Sean Nyekjaer <sean.nyekjaer@prevas.dk> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Sean Nyekjaer authored
Devicetree can provide platform data Signed-off-by:
-
Phil Reid authored
Use the ARRAY_SIZE macro in the for loops that access queue->fileio.blocks. Macro is already used in a couple of places where this access occurs, but range was hardcoded in these locations. Signed-off-by:
Phil Reid <preid@electromag.com.au> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Florian Vaussard authored
The driver supports MAX11644, MAX11645, MAX11646 and MAX11647 parts. But the corresponding i2c_device_id are missing. Add them! Signed-off-by:
Florian Vaussard <florian.vaussard@heig-vd.ch> Signed-off-by:
-
Matt Ranostay authored
This is redundant as the containing stucture is allocated as part of iio_device_alloc using kzalloc and hence is already 0. Signed-off-by:
Matt Ranostay <mranostay@gmail.com> Signed-off-by:
-
William Breathitt Gray authored
The Apex Embedded Systems STX104 device features eight lines of digital I/O (four digital inputs and four digital outputs). This patch adds GPIO support for these eight lines of digital I/O via GPIOLIB. Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
gcc warns about a potentially uninitialized variable use in as3935_event_work: drivers/iio/proximity/as3935.c: In function ‘as3935_event_work’: drivers/iio/proximity/as3935.c:231:6: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This case specifically happens when spi_w8r8() fails with a negative return code. We check all other users of this function except this one. As the error is rather unlikely to happen after the device has already been initialized, this just adds a dev_warn(). Another warning already exists in the same function, but is missing a trailing '\n' character, so I'm fixing that too. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Luis de Bethencourt authored
Go to error_ret if sca3000_read_ctrl_reg() failed. Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
-
Dan O'Donovan authored
Add ACPI device ID matching for TI ADC081C/ADC101C/ADC121C ADCs. Signed-off-by:
Dan O'Donovan <dan@emutex.com> Signed-off-by:
-
Crestez Dan Leonard authored
The trigger name is documented as unique but drivers are currently allowed to register triggers with duplicate names. This should be considered a bug since it makes the 'current_trigger' interface unusable. Signed-off-by:
Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by:
-
Ioana Radulescu authored
The layer abstracting the building of commands and extracting responses is currently based on macros that shift and mask the command fields and requires exposing offset/size values as macro parameters and makes the code harder to read. For clarity and maintainability, instead use an implementation based on mapping the MC command definitions to C structures. These structures contain the hardware command fields (which are naturally-aligned) and individual fields are little-endian ordering (the byte ordering of the hardware). As such, there is no need to perform the conversion between core and hardware (LE) endianness in mc_send_command(), but instead each individual field in a command will be converted separately if needed by the function building the command or extracting the response. This patch does not introduce functional changes, both the hardware ABIs and the APIs exposed for the DPAA2 objects remain the same. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stuart Yoder authored
For an MSI domain the hwirq is an arbitrary but unique id to identify an interrupt. Previously the hwirq was set to the MSI index of the interrupt, but that only works if there is one DPRC. Additional DPRCs require an expanded namespace. Use both the ICID (which is unique per DPRC) and the MSI index to compose a hwirq value. Signed-off-by:
-
Stuart Yoder authored
When unbinding a dprc from the dprc driver the cleanup of the resource pools must happen after irq pool cleanup is done. Signed-off-by:
-
Stuart Yoder authored
add missing free of the Linux irq when tearing down interrupts Signed-off-by:
-
Bharat Bhushan authored
An mc_io represents a mapped MC portal. Previously, an mc_io was created for the root dprc in fsl_mc_bus_probe() and for child dprcs in dprc_probe(). But the free of that data structure happened in the general bus remove callback. This asymmetry resulted in some bugs due to unwanted destroys of mc_io object in some scenarios (e.g. vfio). Fix this bug by making things symmetric-- mc_io created in fsl_mc_bus_probe() is freed in fsl_mc_bus_remove(). The mc_io created in dprc_probe() is freed in dprc_remove(). Signed-off-by:
Bharat Bhushan <Bharat.Bhushan@nxp.com> [Stuart: added check for root dprc and reworded commit message] Signed-off-by:
-
Stuart Yoder authored
make fsl_mc_is_root_dprc() global so that the dprc driver can use it Signed-off-by:
-
Stuart Yoder authored
some drivers (built as modules) rely on mc_get_version() Signed-off-by:
-
Stuart Yoder authored
Move the definition of fsl_mc_device_id to its proper location in mod_devicetable.h, and add fsl-mc bus support to devicetable-offsets.c and file2alias.c to enable device table matching. With this patch udev based module loading of fsl-mc drivers is supported. Signed-off-by:
-
Stuart Yoder authored
-rename the struct used for fsl-mc device ids to be more consistent with other busses -remove the now obsolete and unused version fields Signed-off-by:
-
Stuart Yoder authored
Replace placeholder code in the uevent callback to properly set the MODALIAS env variable. Signed-off-by:
-
Stuart Yoder authored
In order to support uevent based module loading implement modalias support for the fsl-mc bus driver. Aliases are based on vendor and object/device id and are of the form "fsl-mc:vNdN". Signed-off-by:
-
- 25 Jun, 2016 18 commits
-
-
Wei Yongjun authored
In case of error, the function kthread_run() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by:
Julian Calaby <julian.calaby@gmail.com> Signed-off-by:
-
Luis de Bethencourt authored
hif_drv->usr_scan_req.net.net_info[i] contains found_net_info structs which have the following element: u8 bssid[6]; pstrNetworkInfo, of type network_info, also contains an u8 array named bssid. request->ssids is an array of cfg80211_ssid structs. Making ssid: u8 ssid[IEEE80211_MAX_SSID_LEN]; In these 3 cases the arrays are being checked against NULL, which can't happen. Removing the checks since they will always be true. Found with smatch: drivers/staging/wilc1000/host_interface.c:1234 Handle_RcvdNtwrkInfo() warn: this array is probably non-NULL. 'hif_drv->usr_scan_req.net_info[i].bssid' drivers/staging/wilc1000/host_interface.c:1235 Handle_RcvdNtwrkInfo() warn: this array is probably non-NULL. 'pstrNetworkInfo->bssid' drivers/staging/wilc1000/host_interface.c:1253 Handle_RcvdNtwrkInfo() warn: this array is probably non-NULL. 'hif_drv->usr_scan_req.net_info[hif_drv->usr_scan_req.rcvd_ch_cnt].bssid' drivers/staging/wilc1000/host_interface.c:1254 Handle_RcvdNtwrkInfo() warn: this array is probably non-NULL. 'pstrNetworkInfo->bssid' Signed-off-by:
-
Binoy Jayan authored
Replace the interface 'wilc_mq_send' with 'wilc_enqueue_cmd' and remove the now unused structures 'message' and 'message_queue'. Restructure switch statement in the work queue helper function host_if_work and remove unwanted indentation. Signed-off-by:
Binoy Jayan <binoy.jayan@linaro.org> Reviewed-by:
-
Binoy Jayan authored
Deconstruct the kthread / message_queue logic, replacing it with create_singlethread_workqueue() / queue_work() setup, by adding a 'struct work_struct' to 'struct host_if_msg'. The current kthread hostIFthread() is converted to a work queue helper with the name 'host_if_work'. Signed-off-by:
-
Binoy Jayan authored
Move the contents of wilc_msgqueue.c and wilc_msgqueue.h into host_interface.c, remove 'wilc_msgqueue.c' and 'wilc_msgqueue.h'. This is done so as to restructure the implementation of the kthread 'hostIFthread' using a work queue. Signed-off-by:
-
Binoy Jayan authored
The semaphore 'close_exit_sync' does not serve any purpose other than delaying the deregistration of the device which it is trying to protect from shared access. 'up' is called only when a subdevice is closed and not when it is opened. So, the semaphore count only goes up when the device is used. Signed-off-by:
-
Binoy Jayan authored
The semaphore 'sync_event' is used as completion, so convert it to a struct completion type. Also, return -ETIME if the return value of wait_for_completion_timeout is 0. Signed-off-by:
-
Binoy Jayan authored
The semaphore 'cfg_event' is used as completion, so convert it to a struct completion type. Signed-off-by:
-
Binoy Jayan authored
The semaphore 'txq_add_to_head_cs' is a simple mutex, so it should be written as one. Semaphores are going away in the future. Also, removing the timeout scenario as the error handling code does not propagate the timeout properly. Signed-off-by:
-
Binoy Jayan authored
The semaphore 'txq_event' is used as completion, so convert it to a struct completion type. Signed-off-by:
-
Julia Lawall authored
firmare -> firmware Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in dev_err messages Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Chaehyun Lim authored
There is no need to use type cast of bss_type because hif_drv->cfg_values.bss_type is u8. Signed-off-by:
Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by:
-
Chaehyun Lim authored
A local bss_type variable is added to remove checkpatch warning of line over 80 characters. Signed-off-by:
-
Chaehyun Lim authored
struct set_mac_addr is not used anymore, so just remove it. Signed-off-by:
-
Chaehyun Lim authored
This patch renames result to ret that is used to get return value from wilc_send_config_pkt. Some handle_*() functions are used as result, others are used as ret. It will be changed as ret in all handle_*() functions to match variable name. Signed-off-by:
-
Chaehyun Lim authored
This patch changes data type of result variable from s32 to int. result is used to get return value from wilc_send_config_pkt that has return type of int. Signed-off-by:
-
Chaehyun Lim authored
When handle_cfg_param is called in hostIFthread that is a kernel thread, it is not checked return type of this function. This patch changes return type to void. Signed-off-by:
-
