- 16 May, 2018 20 commits
-
-
Karsten Graul authored
Before smc_lgr_free() is called the link must be set inactive by calling smc_llc_link_inactive(). Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Karsten Graul authored
Always set a reason_code when smc_conn_create() returns an error code. Signed-off-by:
-
Karsten Graul authored
SMC handles deferred work in tasklets. As tasklets cannot sleep this can result in rare EBUSY conditions, so defer this work in a work queue. The high level api functions do not defer work because they can sleep until the llc send is actually completed. Signed-off-by:
-
Karsten Graul authored
Move the llc layer specific initialization and cleanup out of smc_core.c into smc_llc.c (smc_llc_link_init and smc_llc_link_clear). Move all initialization of a link into the new init function. Signed-off-by:
-
Karsten Graul authored
Make smc_llc_send_test_link() static and remove it from the header file. And to send a test_link response set the response flag and send the message back as-is, without using smc_llc_send_test_link(). And because smc_llc_send_test_link() must no longer send responses, remove the response flag handling from the function. Signed-off-by:
-
Karsten Graul authored
Remove an unneeded (void *) cast from the calls to smc_llc_send_message(). No functional changes. Signed-off-by:
-
Karsten Graul authored
Register new rmb buffers with the remote peer by exchanging a confirm_rkey llc message. Signed-off-by:
-
Ursula Braun authored
If TCP_NODELAY is set or TCP_CORK is reset, setsockopt triggers the tx worker. This does not make sense, if the SMC socket switched to the TCP fallback when the connection is created. This patch adds the additional check for the fallback case. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5e-updates-2018-05-14 Misc update for mlx5e netdevice driver From Gal Pressman: - Remove MLX5E_TEST_BIT macros and use test_bit instead - Use __set_bit when possible From Eran Ben Elisha: - Improve debug print on initial RX posting timeout From Or Gerlitz: - Support offloaded TC flows with no matches on headers - mlx5e TC cleanups Trivial cleanups From Roi, Tariq and Saeed: - Use bool as return type for mlx5e_xdp_handle - Use u8 instead of int for LRO number of segments - Skip redundant checks when providing NUD lastuse feedback - Remove redundant vport context vlan update ==================== Signed-off-by: -
David S. Miller authored
Salil Mehta says: ==================== Misc. Bug Fixes and clean-ups for HNS3 Driver This patch-set mainly introduces various bug fixes, cleanups and one very small enhancement to existing HN3 driver code. ==================== Signed-off-by: -
Fuyun Liang authored
We call pcim_iomap in hclge_pci_init, pcim_iounmap should be called in error handle of hclge_init_ae_dev. We call pcim_iomap in hclge_pci_init, but do not call pcim_iounmap in hclge_pci_uninit. When we remove the hclge.ko and insert it again, a problem that pci can not map will happen. pcim_iounmap need to be called in hclge_pci_uninit. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Peng Li authored
As HNS3 driver will enable SRIOV default and enable all VFs the HW support, if PF and VF driver compiled to kernel, VF driver will work on host default, it is not right. This patch adds support for hns3_driver.sriov_configure to support user configs the VF_num, and do not enable sriov default. Signed-off-by:
Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by:
-
Yunsheng Lin authored
When hclge_ae_start is called, hdev->hw.mac.link may be set to one after up/down multi-times, which does not correspond to the link state of netdev when the netdev is up. This fixes it by setting hdev->hw.mac.link to zero when hclge_ae_start is called. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
When sriov is enabled, the Qset and tc mapping is not longer one to one relation. This patch fixes it by mapping all pf and vf's Qset to tc. Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by:
-
Fuyun Liang authored
A client includes many client instance. Just like ae_algo, Initializing client instance failed does not represent registering client failed. The action of registering client just is adding client to the client list and the result always is true. This patch changes the return value of hnae3_register_client form a variable value to a fixed value, makes the function always return ok. Signed-off-by:
-
Fuyun Liang authored
The ae_algo is used by many ae_devs. It is not only belong to just a ae_dev. Initializing ae_dev failed does not represent registering ae_algo failed. Because the action of registering ae_algo just is adding ae_algo to the ae_algo list and it is always is true, it make no sense to define return type as int. This patch changes the return type of hnae3_register_ae_algo from int to void. Signed-off-by:
-
Fuyun Liang authored
If hclge.ko has not been inserted, the value of ret always is zero in hnae3_register_ae_dev. If hclge.ko has been inserted, the value of ret is zero or non zero. Different execution ways have different results. It is confusing. The ae_dev which is initialized failed can be reinitialized when we remove hclge.ko and insert it again. For the case initializing client instance, it is just like the case initializing ae_dev. The main function of hnae3_register_ae_dev is adding the ae_dev to ad_dev list. Because adding ae_dev is always ok, we does not need to return any in this function. This patch changes the return type of hnae3_register_ae_dev from int to void. Signed-off-by:
-
Fuyun Liang authored
If the client instance is initializd failed, we do not need to uninit it. This patch adds a state check to check init state of client instance. Fixes: 38caee9d ("net: hns3: Add support of the HNAE3 framework") Signed-off-by:
-
Fuyun Liang authored
When initializing ae_dev failed during loading hclge.ko, the drvdata will be set to null. When removing hns3.ko, we get a null ae_dev. It causes the null pointer problem. This patch removes pci_set_drvdata from error handle of hclge_init_ae_dev to fix the bug, since pci_set_drvdata has been called in hns3_remove. Also, we do not need to uninit the ae_dev which is not initialized. And it may be the one which is initialized failed. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Fuyun Liang authored
When hnae3_unregister_ae_algo is called by PF, pci_disable_sriov is called. And then, hns3_remove is called by VF. We get deadlocked in this case. Since VF pci device is dependent on PF pci device, When PF pci device is removed, VF pci device must be removed. Also, To solve the deadlock problem, VF pci device should be removed before PF pci device is removed. This patch moves pci_enable/disable_sriov from hclge to hns3 to solve the deadlock problem. Also, we do not need to return EPROBE_DEFER in hnae3_register_ae_dev, because SRIOV is no longer enabled in the context calling hnae3_register_ae_dev. Mutex_trylock can be replaced with mutex_lock. Fixes: 424eb834 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by:
-
- 15 May, 2018 20 commits
-
-
David S. Miller authored
Alexandre Belloni says: ==================== Microsemi Ocelot Ethernet switch support This series adds initial support for the Microsemi Ethernet switch present on Ocelot SoCs. This only has bridging (and STP) support for now and it uses the switchdev framework. Coming features are VLAN filtering, link aggregation, IGMP snooping. The switch can also be connected to an external CPU using PCIe. Also, support for integration on other SoCs will be submitted. The ocelot dts changes are here for reference and should probably go through the MIPS tree once the bindings are accepted. Changes in v3: - Collected Reviewed-by * Switchdev driver: - Fixed two issues reported by kbuild - Modified ethtool statistics to support different layoiut on different chips and take care of counter overflow Changes in v2: - Dropped Microsemi Ocelot PHY support * MIIM driver: - Documented interrupts bindings - Moved the driver to drivers/net/phy/ - Removed unused mutex - Removed MDIO bus scanning * Switchdev driver: - Changed compatible to mscc,vsc7514-switch - Removed unused header inclusion - Factorized MAC table selection in ocelot_mact_select() - Disable the port in ocelot_port_stop() - Fixed the smatch endianness warnings - int to unsinged int where necessary - Removed VID handling for the FDB it has been reworked anyway and will be submitted with VLAN support - Fixed up unused cases in ocelot_port_attr_set() - Added a loop to register all the IO register spaces - the ports are now in an ethernet-ports node I've tried switching to NAPI but this is not working well, mainly because the only way to disable interrupts is to actually mask them in the interrupt controller (it is not possible to tell the switch to stop generating interrupts). ==================== Signed-off-by: -
Alexandre Belloni authored
Add myself as a maintainer for the Microsemi Ethernet switches. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Alexandre Belloni authored
Add a driver for Microsemi Ocelot Ethernet switch support. This makes two modules: mscc_ocelot_common handles all the common features that doesn't depend on how the switch is integrated in the SoC. Currently, it handles offloading bridging to the hardware. ocelot_io.c handles register accesses. This is unfortunately needed because the register layout is packed and then depends on the number of ports available on the switch. The register definition files are automatically generated. ocelot_board handles the switch integration on the SoC and on the board. Frame injection and extraction to/from the CPU port is currently done using register accesses which is quite slow. DMA is possible but the port is not able to absorb the whole switch bandwidth. Signed-off-by:
-
Alexandre Belloni authored
DT bindings for the Ethernet switch found on Microsemi Ocelot platforms. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Alexandre Belloni authored
Add a driver for the Microsemi MII Management controller (MIIM) found on Microsemi SoCs. On Ocelot, there are two controllers, one is connected to the internal PHYs, the other one can communicate with external PHYs. Reviewed-by:
-
Alexandre Belloni authored
DT bindings for the Microsemi MII Management Controller found on Microsemi SoCs Reviewed-by:
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: Introduce sctp_flush_ctx This struct will hold all the context used during the outq flush, so we don't have to pass lots of pointers all around. Checked on x86_64, the compiler inlines all these functions and there is no derreference added because of the struct. This patchset depends on 'sctp: refactor sctp_outq_flush' Changes since v1: - updated to build on top of v2 of 'sctp: refactor sctp_outq_flush' Changes since v2: - fixed a rebase issue which reverted a change in patch 2. - rebased on v3 of 'sctp: refactor sctp_outq_flush' ==================== Signed-off-by: -
Marcelo Ricardo Leitner authored
A collection of fixups from previous patches, left for later to not introduce unnecessary changes while moving code around. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
Pre-compute these so the compiler won't reload them (due to no-strict-aliasing). Changes since v2: - Do not replace a return with a break in sctp_outq_flush_data Signed-off-by:
-
Marcelo Ricardo Leitner authored
With this struct we avoid passing lots of variables around and taking care of updating the current transport/packet. Signed-off-by:
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: refactor sctp_outq_flush Currently sctp_outq_flush does many different things and arguably unrelated, such as doing transport selection and outq dequeueing. This patchset refactors it into smaller and more dedicated functions. The end behavior should be the same. The next patchset will rework the function parameters. Changes since v1: - fix build issues on patches 3 and 4, and updated 5 and 8 because of it. Changes since v2: - fixed panic if building with just up to patch 3 applied ==================== Signed-off-by: -
Marcelo Ricardo Leitner authored
Remove an inner one, which tended to be error prone due to the cascading and it can be replaced by a simple if (). Rework the outer one so that the actual flush code is not inside it. Now we first validate if we can or cannot send data, return if not, and then the flush code. Suggested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
Retransmissions may be triggered when in user context, so lets make use of gfp. Signed-off-by:
-
Marcelo Ricardo Leitner authored
To the new sctp_outq_flush_transports. Comment on Nagle is outdated and removed. Nagle is performed earlier, while checking if the chunk fits the packet: if the outq length is not enough to fill the packet, it returns SCTP_XMIT_DELAY. So by when it gets to sctp_outq_flush_transports, it has to go through all enlisted transports. Signed-off-by:
-
Marcelo Ricardo Leitner authored
To the new sctp_outq_flush_data. Again, smaller functions and with well defined objectives. Signed-off-by:
-
Marcelo Ricardo Leitner authored
This patch renames current sctp_outq_flush_rtx to __sctp_outq_flush_rtx and create a new sctp_outq_flush_rtx, with the code that was on sctp_outq_flush. Again, the idea is to have functions with small and defined objectives. Yes, there is an open-coded path selection in the now sctp_outq_flush_rtx. That is kept as is for now because it may be very different when we implement retransmission path selection algorithms for CMT-SCTP. Signed-off-by:
-
Marcelo Ricardo Leitner authored
Named sctp_outq_flush_ctrl and, with that, keep the contexts contained. One small fix embedded is the reset of one_packet at every iteration. This allows bundling of some control chunks in case they were preceeded by another control chunk that cannot be bundled. Other than this, it has the same behavior. Changes since v2: - Fixed panic reported by kbuild test robot if building with only up to this patch applied, due to bad parameter to sctp_outq_select_transport and by not initializing packet after calling sctp_outq_flush_ctrl. Signed-off-by:
-
Marcelo Ricardo Leitner authored
We had two spots doing such complex operation and they were very close to each other, a bit more tailored to here or there. This patch unifies these under the same function, sctp_outq_select_transport, which knows how to handle control chunks and original transmissions (but not retransmissions). Signed-off-by:
-
Marcelo Ricardo Leitner authored
Factor out the code for generating singletons. It's used only once, but helps to keep the context contained. The const variables are to ease the reading of subsequent calls in there. Signed-off-by:
-
Kumar Sanghvi authored
Adds support for matching flows based on tunnel VNI value. Introduces fw APIs for allocating/removing MPS entries related to encapsulation. And uses the same while adding/deleting filters for offloading flows based on tunnel VNI match. Signed-off-by:
Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
