- 15 Oct, 2007 40 commits
-
-
Jeff Garzik authored
This driver was using hooks that were very recently removed. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) [IPV6]: Consolidate the ip6_pol_route_(input|output) pair [TCP]: Make snd_cwnd_cnt 32-bit [TCP]: Update the /proc/net/tcp documentation [NETNS]: Don't panic on creating the namespace's loopback [NEIGH]: Ensure that pneigh_lookup is protected with RTNL [INET]: kmalloc+memset -> kzalloc in frag_alloc_queue [ISDN]: Fix compile with CONFIG_ISDN_X25 disabled. [IPV6]: Replace sk_buff ** with sk_buff * in input handlers [SELINUX]: Update for netfilter ->hook() arg changes. [INET]: Consolidate the xxx_put [INET]: Small cleanup for xxx_put after evictor consolidation [INET]: Consolidate the xxx_evictor [INET]: Consolidate the xxx_frag_destroy [INET]: Consolidate xxx_the secret_rebuild [INET]: Consolidate the xxx_frag_kill [INET]: Collect common frag sysctl variables together [INET]: Collect frag queues management objects together [INET]: Move common fields from frag_queues in one place. [TG3]: Fix performance regression on 5705. [ISDN]: Remove local copy of device name to make sure renames work. ...
-
Jeremy Katz authored
There are standard keycodes for brightness and volume; map the events to emit them so that things work properly Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: use full RCU API Input: remove tsdev interface Input: add support for Blackfin BF54x Keypad controller Input: appletouch - another fix for idle reset logic HWMON: hdaps - switch to using input-polldev Input: add support for SEGA Dreamcast keyboard Input: omap-keyboard - don't pretend we support changing keymap Input: lifebook - fix X and Y axis range Input: usbtouchscreen - add support for GeneralTouch devices Input: fix open count handling in input interfaces Input: keyboard - add CapsShift lock Input: adbhid - produce all CapsLock key events Input: ALPS - add signature for ThinkPad R61 Input: jornada720_kbd - send MSC_SCAN events Input: add support for the HP Jornada 7xx (710/720/728) touchscreen Input: add support for HP Jornada 7xx onboard keyboard Input: add support for HP Jornada onboard keyboard (HP6XX) Input: ucb1400_ts - use schedule_timeout_uninterruptible Input: xpad - fix dependancy on LEDS class Input: auto-select INPUT for MAC_EMUMOUSEBTN option ... Resolved conflicts manually in drivers/hwmon/applesmc.c: converting from a class device to a device and converting to use input-polldev created a few apparently trivial clashes..
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] pata_pcmcia: Add additional id string (corsair, 1GB) libata: prevent devices with blank model names from being DMA blacklisted ata_piix: SATA 2port controller port map fix pata_cs5536: ATA driver for Geode companion chip libata: add ST9160821AS / 3.CCD to NCQ blacklist libata: fix revalidation issuing after configuration commands [libata] sata_nv: add SW NCQ support for MCP51/MCP55/MCP61 [libata] pata_sil680: Add MMIO support
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (35 commits) xen-netfront: rearrange netfront structure to separate tx and rx netdev: convert non-obvious instances to use ARRAY_SIZE() ucc_geth: Fix build break introduced by commit 09f75cd7 gianfar: Fix regression caused by new napi interface gianfar: Cleanup compile warning caused by 0795af57 gianfar: Fix compile regression caused by bea3348e add new prom.h for AU1x00 update AU1000 get_ethernet_addr() MIPSsim: General cleanup Jazzsonic: Fix warning about unused variable. Remove msic_dcr_read() in axon_msi.c Use dcr_host_t.base in dcr_unmap() Add dcr_host_t.base in dcr_read()/dcr_write() Use dcr_host_t.base in ibm_emac_mal Update ibm_newemac to use dcr_host_t.base tehuti: possible leak in bdx_probe TC35815: Fix build SAA9730: Fix build AR7 ethernet myri10ge: update driver version to 1.3.2-1.287 ...
-
Jeremy Fitzhardinge authored
Keep tx and rx elements separate on different cachelines to prevent bouncing. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Geert Uytterhoeven authored
Atari keyboard: incorporate additional review comments: o Kill reference to source file name o Return error value from input_register_device() instead of -ENOMEM Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Pavel Emelyanov authored
The difference in both functions is in the "id" passed to the rt6_select, so just pass it as an extra argument from two outer helpers. This is minus 60 lines of code and 360 bytes of .text Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
Very little point of having 32-bit snd_cnwd if this is not 32-bit as well, as a number of snd_cwnd incrementation formulas assume that snd_cwnd_cnt can be at least as large as snd_cwnd. Whether 32-bit is useful was discussed when e0ef57cc was made: http://marc.info/?l=linux-netdev&m=117218144409825&w=2Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jean Delvare authored
* Say that this interface is deprecated. * Update function name references to match the current code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alejandro Martinez Ruiz authored
This will convert remaining non-obvious or naive calculations of array sizes to use ARRAY_SIZE() macro. Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Pavel Emelyanov authored
When the loopback device is failed to initialize inside the new namespaces, panic() is called. Do not do it when the namespace in question is not the init_net. Plus cleanup the error path a bit. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Commit 90833fda ("[ARM] 4554/1: replace consistent_sync() with flush_ioremap_region()") introduced a new "flush_ioremap_region()" function to be used by the MTD mainstone-flash and lubbock-flash drivers to fix a regression from around 2.6.18. Those drivers were independently merged into a single driver by Todd Poynor in commit e644f7d6 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver") Later, those two commits were merged into the main MTD tree by commit b160292c ("Merge Linux 2.6.23") by David Woodhouse, but in that merge, the fix to use flush_iomap_region() got lost (as it was to files that now no longer existed). This reinstates the fix in the new driver. Noticed-by: Russell King <rmk@arm.linux.org.uk> Tested-and-acked-by: Nicolas Pitre <nico@cam.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Pavel Emelyanov authored
The pnigh_lookup is used to lookup proxy entries and to create them in case lookup failed. However, the "creation" code does not perform the re-lookup after GFP_KERNEL allocation. This is done because the code is expected to be protected with the RTNL lock, so add the assertion (mainly to address future questions from new network developers like me :) ). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
kmalloc + memset -> kzalloc in frag_alloc_queue Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
On Mon, Oct 15, 2007 at 06:44:56PM +0400, Denis V. Lunev wrote: Compilation fix. The problem appears after 7c076d1de869256848dacb8de0050a3a390f95df by Karsten Keil <kkeil@suse.de> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kristoffer Ericson authored
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Herbert Xu authored
With all the users of the double pointers removed from the IPv6 input path, this patch converts all occurances of sk_buff ** to sk_buff * in IPv6 input handlers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
If the gdth module is loaded (or compiled in), the gdth_timeout function gets started even if no actual gdth controllers are found b the probing. That ends up not only being unnecessary, but also causes a crash due to the function blindly just trying to pick the first entry off the "gdth_instances" list, and accessing it - which obviously doesn't work if the list is empty! Noticed by Ingo Molnar. Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Paprocki authored
The strn_pattern_cmp routine does not handle a blank name parameter properly. The only patterns which should match a blank name are "*" and an explicit "". If the function is passed a blank name in current code, it will always match against the patt parameter. The bug manifests itself as the device with the empty model name always matching the first device in the DMA blacklist, forcing it to revert to PIO mode. Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jason Gaston authored
This patch adds a port map for ICH9 and ICH8 SATA controllers that have only 2 ports available in that mode. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Martin K. Petersen authored
This is a driver for the ATA controller on the Geode CS5536 companion chip. The PCI device ID for this device was previously claimed by pata_amd.c but the PIO timings were not correct. This driver also works around a bug in some BIOSes that handle unaligned access to the PCI config registers poorly. Finally, the driver allows fallback to using MSR registers for configuration on BIOSes that are truly broken. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
David S. Miller authored
They take a "struct sk_buff *" instead of a "struct sk_buff **" now. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
These ones use the generic data types too, so move them in one place. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
After the evictor code is consolidated there is no need in passing the extra pointer to the xxx_put() functions. The only place when it made sense was the evictor code itself. Maybe this change must got with the previous (or with the next) patch, but I try to make them shorter as much as possible to simplify the review (but they are still large anyway), so this change goes in a separate patch. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
The evictors collect some statistics for ipv4 and ipv6, so make it return the number of evicted queues and account them all at once in the caller. The XXX_ADD_STATS_BH() macros are just for this case, but maybe there are places in code, that can make use of them as well. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
To make in possible we need to know the exact frag queue size for inet_frags->mem management and two callbacks: * to destoy the skb (optional, used in conntracks only) * to free the queue itself (mandatory, but later I plan to move the allocation and the destruction of frag_queues into the common place, so this callback will most likely be optional too). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
This code works with the generic data types as well, so move this into inet_fragment.c This move makes it possible to hide the secret_timer management and the secret_rebuild routine completely in the inet_fragment.c Introduce the ->hashfn() callback in inet_frags() to get the hashfun for a given inet_frag_queue() object. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Since now all the xxx_frag_kill functions now work with the generic inet_frag_queue data type, this can be moved into a common place. The xxx_unlink() code is moved as well. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Some sysctl variables are used to tune the frag queues management and it will be useful to work with them in a common way in the future, so move them into one structure, moreover they are the same for all the frag management codes. I don't place them in the existing inet_frags object, introduced in the previous patch for two reasons: 1. to keep them in the __read_mostly section; 2. not to export the whole inet_frags objects outside. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
There are some objects that are common in all the places which are used to keep track of frag queues, they are: * hash table * LRU list * rw lock * rnd number for hash function * the number of queues * the amount of memory occupied by queues * secret timer Move all this stuff into one structure (struct inet_frags) to make it possible use them uniformly in the future. Like with the previous patch this mostly consists of hunks like - write_lock(&ipfrag_lock); + write_lock(&ip4_frags.lock); To address the issue with exporting the number of queues and the amount of memory occupied by queues outside the .c file they are declared in, I introduce a couple of helpers. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Introduce the struct inet_frag_queue in include/net/inet_frag.h file and place there all the common fields from three structs: * struct ipq in ipv4/ip_fragment.c * struct nf_ct_frag6_queue in nf_conntrack_reasm.c * struct frag_queue in ipv6/reassembly.c After this, replace these fields on appropriate structures with this structure instance and fix the users to use correct names i.e. hunks like - atomic_dec(&fq->refcnt); + atomic_dec(&fq->q.refcnt); (these occupy most of the patch) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
A performance regression was introduced by the following commit: commit ee6a99b5 Author: Michael Chan <mchan@broadcom.com> Date: Wed Jul 18 21:49:10 2007 -0700 [TG3]: Fix msi issue with kexec/kdump. In making that change, the PCI latency timer and cache line size registers were not restored after chip reset. On the 5705, the latency timer gets reset to 0 during chip reset and this causes very poor performance. Update version to 3.84. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Uninline netfilter okfns for those cases where gcc can generate tail-calls. Before: text data bss dec hex filename 8994153 1016524 524652 10535329 a0c1a1 vmlinux After: text data bss dec hex filename 8992761 1016524 524652 10533937 a0bc31 vmlinux ------------------------------------------------------- -1392 All cases have been verified to generate tail-calls with and without netfilter. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Now that we don't pass double skb pointers to nf_hook_slow anymore, gcc can generate tail calls for some of the netfilter hook okfn invocations, so there is no need to inline the functions anymore. This caused huge code bloat since we ended up with one inlined version and one out-of-line version since we pass the address to nf_hook_slow. Before: text data bss dec hex filename 8997385 1016524 524652 10538561 a0ce41 vmlinux After: text data bss dec hex filename 8994009 1016524 524652 10535185 a0c111 vmlinux ------------------------------------------------------- -3376 All cases have been verified to generate tail-calls with and without netfilter. The okfns in ipmr and xfrm4_input still remain inline because gcc can't generate tail-calls for them. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
TCP packets all have writable heads, that is, even though it's cloned, it is writable up to the end of the TCP header. This patch makes skb_checksum_help aware of this fact by using skb_clone_writable and avoiding a copy for TCP. I've also modified the BUG_ON tests to be unsigned. The only case where this makes a difference is if csum_start points to a location before skb->data. Since skb->data should always include the header where the checksum field is (and all currently callers adhere to that), this change is safe and may uncover bugs later. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-