* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  Move all of include/asm-m68knommu to arch/m68knommu/include/asm.

This driver was declared obsolete over 2 years ago, the alternative
console driver for legacy iSeries (hvc_iseries) was made the default
over 1 year ago and this driver has been build broken for over 3
months, so remove it.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (23 commits)
  V4L/DVB (8617): uvcvideo: don't use stack-based buffers for USB transfers.
  V4L/DVB (8616): uvcvideo: Add support for two Bison Electronics webcams
  V4L/DVB (8611): Add suspend/resume to pxa_camera driver
  V4L/DVB (8610): Add suspend/resume capabilities to soc_camera.
  V4L/DVB (8609): media: Clean up platform_driver_unregister() bogosity.
  V4L/DVB (8607): cxusb: fix OOPS and broken tuning regression on FusionHDTV Dual Digital 4
  V4L/DVB (8605): gspca: Fix of gspca_zc3xx oops - 2.6.27-rc1
  V4L/DVB (8604): gspca: Fix of "scheduling while atomic" crash.
  V4L/DVB (8602): gspca: Fix small bugs, simplify and cleanup ov519.
  V4L/DVB (8582): set mts_firmware for em2882 based Pinnacle Hybrid Pro
  V4L/DVB (8574): gspca: Bad bytesperlines of pixelformat in spca505/506/508 and vc023x.
  V4L/DVB (8573): gspca: Bad scan of frame in spca505/506/508.
  V4L/DVB (8572): gspca: Webcam 0c45:6143 in documentation.
  V4L/DVB (8571): gspca: Don't use CONFIG_VIDEO_ADV_DEBUG as a compile option.
  V4L/DVB (8569): gspca: Set back the old values of Sonix sn9c120 and cleanup source.
  V4L/DVB (8567): gspca: hflip and vflip controls added for ov519 - ov7670 plus init cleanup.
  V4L/DVB (8564): fix vino driver build error
  V4L/DVB (8563): fix drivers/media/video/arv.c compilation
  V4L/DVB (8562): DVB_DRX397XD: remove FW_LOADER select
  V4L/DVB (8558): media/video/Kconfig: fix a typo
  ...

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03
  hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07
  hwmon: (hwmon-vid) Add 6-bit vid codes for AMD NPT 0Fh cpus
  hwmon: (hwmon-vid) Trivial format multi-line comments per CodingStyle
  hwmon: ad7414 driver
  hwmon: (thmc50) Add support for critical temperature limits
  hwmon: (adm9240) Remove EXPERIMENTAL dependency
  hwmon: (w83627hf) Drop reset module parameter
  hwmon: (w83627hf) Add pwm_enable sysfs interface
  hwmon: (w83791d) Use fan divisor bits from vbat register
  hwmon: (f71882fg) Delete needless forward declarations
  hwmon: (dme1737) Add support for the SMSC SCH5027
  hwmon: (dme1737) Skip detection if forced
  hwmon: (dme1737) Cleanups

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (70 commits)
  [WATCHDOG] more coding style clean-up's
  [WATCHDOG] sbc8360.c - move stop code into a function
  [WATCHDOG] Coding style - Indentation - part 2
  [WATCHDOG] Coding style - Indentation - part 1
  [WATCHDOG] mpc8xxx_wdt: add support for MPC8xx watchdogs
  [WATCHDOG] mpc8xxx_wdt: fix build
  [WATCHDOG] mpc8xxx_wdt: various renames, mostly s/mpc83xx/mpc8xxx/g
  [WATCHDOG] mpc83xx_wdt: rename to mpc8xxx_wdt
  [WATCHDOG] mpc83xx_wdt: add support for MPC86xx CPUs
  [WATCHDOG] mpc83xx_wdt: convert to the OF platform driver
  [WATCHDOG] pcwd: a couple of watchdogs escaped conversion
  [WATCHDOG] Clean-up includes
  [WATCHDOG] hpwdt.c - fix double includes
  [WATCHDOG 57/57] wdt501/pci: Clean up, coding style and switch to unlocked_ioctl
  [WATCHDOG 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl
  [WATCHDOG 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style
  [WATCHDOG 54/57] wdrtas: clean up, coding style, switch to unlocked_ioctl
  [WATCHDOG 53/57] wafer5823wdt: Clean up, coding style, switch to unlocked_ioctl
  [WATCHDOG 52/57] w83977f_wdt: clean up, coding style and switch to unlocked_ioctl
  [WATCHDOG 51/57] w83877f_wdt: clean up code, coding style, switch to unlocked_ioctl
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: a better way to generate cscope database change
  Kconfig: Extend "menuconfig" for modules to simplify Kconfig file
  bugfix for scripts/patch-kernel in 2.6 sublevel stepping
  kbuild: fix O=.. build with arm

With the current kbuild infrastructure in place no other changes
are required for this to work.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

This reverts commit 680db013.  The label
is actually used, but hidden behind CONFIG_SND_DEBUG and the horrible
snd_assert() macro.

That macro could probably be improved to be along the lines of

	#define snd_assert(expr, args...) do { if ((void)(expr),0) { args; } } while (0)

or similar to make sure that we always both evaluate 'expr' and parse
'args', but while gcc should optimize it all away, I'm too lazy to
really verify that.  So I'll just admit defeat and will continue to live
with the annoying warning.
Noted-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Linus "Grr.." Torvalds

The bogus code to call into the n_tty layer got removed in commit
8bc5fb6a ("Remove bogons from the
iSeries console"), but it left a now uninitialized "return ret;" around.

Not that this code has ever even compiled since the BKL pushdown, since
not only is "ret" no longer initialized, it was never actually declared
even originally.

Replace it with a "return -ENOIOCTLCMD"
Pointed-out-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes the warning

  sound/core/pcm_native.c: In function 'snd_pcm_fasync':
  sound/core/pcm_native.c:3262: warning: label 'out' defined but not used
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The it8705 chip supports 16-bit fan tachometers in revisions at least
>= 0x03 (Version G). This patch enables 16-bit fan readings on all
revisions >= 0x03 just like the it8712, it8716, and it8718 chips.
Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07.
Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The
patch enables 16-bit fan readings on all revisions >= 0x07 just like
the it8716 and it8718 chips.
Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

AMD NPT 0Fh cpus use 6 bit VID codes. Successive codes with msb 0
describe 25mV decrements, while those with msb 1 describe 12.5mV
decrements. Existing hwmon-vid.c is correct only for codes with msb 0;
add support for the codes with msb 1.

Ref:
p 309, Table 71
AMD Publication 32559, BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdfSigned-off-by: Frank Myhr <fmyhr@fhmtech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Frank Myhr <fmyhr@fhmtech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Driver for the Analog Devices AD7414 temperature monitoring chip.
Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Add critical temperature limits to the driver. These limits are read
only.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The adm9240 driver is in the kernel for three years now, time to
remove the EXPERIMENTAL dependency.
Signed-off-by: Grant Coady <gcoady.lk@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Drop the reset parameter of the w83627hf driver. It seems it wasn't
that useful. It was dropped from the Linux 2.4 version of this driver
back in July 2004.

The only users who have reported that they were still using this
parameter, needed it to switch the chip from automatic fan speed
control back to manual mode. Now that the driver creates pwmN_enable
sysfs files, users will be able to use these files instead, which is
way less agressive.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Dominik Geyer <dominik.geyer@gmx.de>

Adds support for pwm_enable sysfs interface for the w83627hf driver.
Signed-off-by: Dominik Geyer <dominik.geyer@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Update w83791d with fan bits in vbat mon register (7.48 of the
datasheet). This change allows all fans to have a divisor of 128, 
and fixes a problem with incorrectly reported fan speeds. 
Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

These functions aren't used before being defined, so there's no point
in forward-declaring them.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>

Add support for the SCH5027. The differences to the DME1737 are:
- No support for programmable temp offsets
- In auto mode, PWM outputs stay on min value if temp goes below low threshold
  and can't be programmed to fully turn off
- Different voltage scaling
- No VID input
Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Skip the checking of the device ID register in the hwmon register
block if the force_id option is used.
Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Fix names of attribute structs to make them more consistent with the 
rest of the code. Minor comment changes.

Signed-off-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

commit 9e98966c (tty: rework break handling)
forgot to update one exit point of rs_break() in the Amiga serial driver.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

More coding style clean-up's.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

It's a problem about cscope target of kernel Makefile, and the cscope
plugin of emacs:
1. `make cscope` will generate cscope.files cscope.{in,po,}.out;
2. the cscope plugin expect a cscope.out.{in,po,};
3. the default `cscope -b` would generate cscope.{in,po,}.out;

There are three approach to solve it:
1. modify the cscope C code;
2. modify the cscope emacs plugin lisp code;
3. modify the Makefile;

I have tried to communicate with the cscope upstream, but later I
realize the third approach is most meaningful.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Given that the init/Kconfig file uses a "menuconfig" directive for
modules already, might as well wrap all the submenu entries in an "if"
to toss all those dependencies.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

scripts/patch-kernel script can't patch a tree, say, from 2.6.25 to
2.6.26.1, because of a wrong comparison in context of patching 2.6.x base.
 Fix it.
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

With a make O=... build kbuild would only create
the include2/asm symlink for archs that not yet
had moved headers to include/$ARCH/include

There is no longer any reason to avoid the symlink
for archs that has moved their headers so create it
unconditionally.

This fixes arm because kbuild checked for include/asm-$ARCH/errno.h
and that file was not present for arm but the platform files
are not yet moved.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Russell King <rmk@arm.linux.org.uk>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_tx: fix missing braces in async_xor_zero_sum

This reverts commit 7cb93181, since we
did that patch twice, and the problem was already fixed earlier by
78a34ae2.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: Preserve response data alignment bug when it is harmless

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Update generic config
  [IA64] Fix uniprocessor build w.r.t. SGI_XP and SGI_GRU
  [IA64] Eliminate trailing backquote in IA64_SGI_UV
  [IA64] update generic_defconfig to support sn2.
  [IA64] update generic_defconfig for 2.6.27-rc1
  [IA64] Allow ia64 to CONFIG_NR_CPUS up to 4096
  [IA64] Cleanup generated file not ignored by .gitignore
  [IA64] pv_ops: fix ivt.S paravirtualization

The iSeries driver calls into the n_tty ldisc code directly for some
bizarre reason. I previously tagged this with a query but this actually
does need fixing as n_tty methods when you have a different ldisc set are
not a good thing to call.

In n_tty mode this change should have no effect, the core tty layer has
always called the ldisc ioctl method *anyway* and will call the one for
the right ldisc.
Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docproc: /var/linsrc/lin2627-rc2/drivers/media/video/videodev.c: No such file or directory
make[1]: *** [Documentation/DocBook/videobook.xml] Error 1
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: mchehab@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move the sbc8360.c watchdog stop code into a seperate function.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This brings the watchdog drivers into line with coding style.
This patch takes cares of the indentation as described in chapter 1.
Main changes:
* Re-structure the ioctl switch call for all drivers as follows:
	switch (cmd) {
	case WDIOC_GETSUPPORT:
	case WDIOC_GETSTATUS:
	case WDIOC_GETBOOTSTATUS:
	case WDIOC_GETTEMP:
	case WDIOC_SETOPTIONS:
	case WDIOC_KEEPALIVE:
	case WDIOC_SETTIMEOUT:
	case WDIOC_GETTIMEOUT:
	case WDIOC_GETTIMELEFT:
	default:
	}

This to make the migration from the drivers to the uniform watchdog
device driver easier in the future.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This brings the watchdog drivers into line with coding style.
This patch takes cares of the indentation as described in chapter 1:
  The preferred way to ease multiple indentation levels in a switch
  statement is to align the "switch" and its subordinate "case"
  labels in the same column instead of "double-indenting" the "case"
  labels.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The mpc8xxx_wdt driver is using two registers: SWSRR to push magic
numbers, and SWCRR to control the watchdog.  Both registers are available
on the MPC8xx, and seem to have the same offsets and semantics as in
MPC83xx/MPC86xx watchdogs.  The only difference is prescale value.  So
this driver simply works on the MPC8xx CPUs.

One quirk is needed for the MPC8xx, though.  It has small prescale value
and slow CPU, so the watchdog resets board prior to the driver has time to
load.  To solve this we should split initialization in two steps: start
ping the watchdog early, and register the watchdog userspace interface
later.

MPC823 seem to be the first CPU in MPC8xx line, so we use fsl,mpc823-wdt
compatible matching.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Jochen Friedrich <jochen@scram.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>