- 13 Feb, 2017 5 commits
-
-
Charles Keepax authored
Currently we leak a lot of things when tearing down the IRQs this patch fixes this cleaning up both the IRQ mappings and the IRQ domain itself. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Charles Keepax authored
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Charles Keepax authored
We have arizona_map_irq we might as well use it rather than hard coding it in several places. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
Merge branches 'ib-mfd-arm-iio-pwm-4.11', 'ib-mfd-input-4.11-1', 'ib-mfd-mtd-4.11' and 'ib-mfd-power-supply-4.11' into ibs-for-mfd-merged
-
Gwendal Grignou authored
Add switch to report tablet mode. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
- 08 Feb, 2017 2 commits
-
-
Douglas Anderson authored
On some newer boards using mkbp we're hooking up non-matrix buttons and switches to the EC but NOT to the main application processor. Let's add kernel support to handle this. Rather than creating a whole new input driver, we'll continue to use cros_ec_keyb and just report the new keys. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Douglas Anderson authored
Add the defines for the new buttons and switches connected to the CrosEC. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
- 25 Jan, 2017 3 commits
-
-
Benjamin Gaignard authored
Timers IPs can be used to generate triggers for other IPs like DAC or ADC. Each trigger may result of timer internals signals like counter enable, reset or edge, this configuration could be done through "master_mode" device attribute. Since triggers could be used by DAC or ADC their names are defined in include/ nux/iio/timer/stm32-timer-trigger.h and is_stm32_iio_timer_trigger function could be used to check if the trigger is valid or not. "trgo" trigger have a "sampling_frequency" attribute which allow to configure timer sampling frequency. version 8: - change kernel version from 4.10 to 4.11 in ABI documentation version 7: - remove all iio_device related code - move driver into trigger directory version 5: - simplify tables of triggers - only create an IIO device when needed version 4: - get triggers configuration from "reg" in DT - add tables of triggers - sampling frequency is enable/disable when writing in trigger sampling_frequency attribute - no more use of interruptions version 3: - change compatible to "st,stm32-timer-trigger" - fix attributes access right - use string instead of int for master_mode and slave_mode - document device attributes in sysfs-bus-iio-timer-stm32 version 2: - keep only one compatible - use st,input-triggers-names and st,output-triggers-names to know which triggers are accepted and/or create by the device Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Benjamin Gaignard authored
Define bindings for STM32 timer trigger version 8: - reword "reg" parameter description version 4: - remove triggers enumeration from DT - add reg parameter version 3: - change file name - add cross reference with mfd bindings version 2: - only keep one compatible - add DT parameters to set lists of the triggers: one list describe the triggers created by the device another one give the triggers accepted by the device Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Benjamin Gaignard authored
This driver adds support for PWM driver on STM32 platform. The SoC have multiple instances of the hardware IP and each of them could have small differences: number of channels, complementary output, auto reload register size... version 9: - fix commit message header - remove one space MODULE_ALIAS version 8: - fix comments done by Thierry on version 7 version 6: - change st,breakinput parameter to make it usuable for stm32f7 too. version 4: - detect at probe time hardware capabilities - fix comments done on v2 and v3 - use PWM atomic ops version 2: - only keep one comptatible - use DT parameters to discover hardware block configuration Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
- 23 Jan, 2017 3 commits
-
-
Benjamin Gaignard authored
Define bindings for pwm-stm32 version 9: - change commit message header version 8: - reword st,breakinput description. version 6: - change st,breakinput parameter format to make it usuable on stm32f7 too. version 2: - use parameters instead of compatible of handle the hardware configuration Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Benjamin Gaignard authored
This hardware block could at used at same time for PWM generation and IIO timers. PWM and IIO timer configuration are mixed in the same registers so we need a multi fonction driver to be able to share those registers. version 7: - rebase on v4.10-rc2 version 6: - rename files to stm32-timers - rename functions to stm32_timers_xxx version 5: - fix Lee comments about detect function - add missing dependency on REGMAP_MMIO version 4: - add a function to detect Auto Reload Register (ARR) size - rename the structure shared with other drivers version 2: - rename driver "stm32-gptimer" to be align with SoC documentation - only keep one compatible - use of_platform_populate() instead of devm_mfd_add_devices() Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Benjamin Gaignard authored
Add bindings information for STM32 Timers version 6: - rename stm32-gtimer to stm32-timers - change compatible - add description about the IPs version 2: - rename stm32-mfd-timer to stm32-gptimer - only keep one compatible string Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
- 04 Jan, 2017 3 commits
-
-
Hans de Goede authored
When the axp288_faul_gauge driver was originally merged, it was merged with a dependency on some other driver providing platform data for it. However the battery-data-framework which should provide that data never got merged, resulting in x86 tablets / laptops with an axp288 having no working battery monitor, as before this commit the driver would simply return -ENODEV if there is no platform data. This commit removes the dependency on the platform_data instead checking that the firmware has initialized the fuel-gauge and reading the info back from the pmic. What is missing from the read-back info is the table to map raw adc values to temperature, so this commit drops the temperature and temperature limits properties. The min voltage, charge design and model name info is also missing. Note that none of these are really important for userspace to have. All other functionality is preserved and actually made available by this commit. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=88471Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
When the axp288_charger driver was originally merged, it was merged with a dependency on some other driver providing platform data for it. However the battery-data-framework which should provide that data never got merged, so the axp288_charger as merged upstream has never worked, its probe method simply always returns -ENODEV. This commit removes the dependency on the platform_data instead reading back the charging current and charging voltage that the firmware has set and using those values as the maximum values the user may set. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
Make charger_init_hw_regs propagate i2c errors, instead of only warning about them and then ignoring them. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
- 03 Jan, 2017 3 commits
-
-
Mika Westerberg authored
Intel Apollo Lake SoC exposes serial SPI flash through the LPC device. The SPI flash host controller is not discoverable through PCI config cycles because P2SB (function 0 of the device 13) is hidden by the BIOS. We unhide the device briefly in order to read BAR 0 of the SPI host controller. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Mika Westerberg authored
Many Intel CPUs including Haswell, Broadwell and Baytrail have SPI serial flash host controller as part of the LPC device. This will populate an MFD cell suitable for the SPI host controller driver if we know that the LPC device has one. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Mika Westerberg authored
Add support for the SPI serial flash host controller found on many Intel CPUs including Baytrail and Braswell. The SPI serial flash controller is used to access BIOS and other platform specific information. By default the driver exposes a single read-only MTD device but with a module parameter "writeable=1" the MTD device can be made read-write which makes it possible to upgrade BIOS directly from Linux. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
- 26 Dec, 2016 2 commits
-
-
Linus Torvalds authored
-
Larry Finger authored
I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Dec, 2016 19 commits
-
-
Linus Torvalds authored
The timer type simplifications caused a new gcc warning: drivers/base/power/domain.c: In function ‘genpd_runtime_suspend’: drivers/base/power/domain.c:562:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized] elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); despite the actual use of "time_start" not having changed in any way. It appears that simply changing the type of ktime_t from a union to a plain scalar type made gcc check the use. The variable wasn't actually used uninitialized, but gcc apparently failed to notice that the conditional around the use was exactly the same as the conditional around the initialization of that variable. Add an unnecessary initialization just to shut up the compiler. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull SMP hotplug notifier removal from Thomas Gleixner: "This is the final cleanup of the hotplug notifier infrastructure. The series has been reintgrated in the last two days because there came a new driver using the old infrastructure via the SCSI tree. Summary: - convert the last leftover drivers utilizing notifiers - fixup for a completely broken hotplug user - prevent setup of already used states - removal of the notifiers - treewide cleanup of hotplug state names - consolidation of state space There is a sphinx based documentation pending, but that needs review from the documentation folks" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-xp: Consolidate hotplug state space irqchip/gic: Consolidate hotplug state space coresight/etm3/4x: Consolidate hotplug state space cpu/hotplug: Cleanup state names cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions staging/lustre/libcfs: Convert to hotplug state machine scsi/bnx2i: Convert to hotplug state machine scsi/bnx2fc: Convert to hotplug state machine cpu/hotplug: Prevent overwriting of callbacks x86/msr: Remove bogus cleanup from the error path bus: arm-ccn: Prevent hotplug callback leak perf/x86/intel/cstate: Prevent hotplug callback leak ARM/imx/mmcd: Fix broken cpu hotplug handling scsi: qedi: Convert to hotplug state machine
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull turbostat updates from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: remove obsolete -M, -m, -C, -c options tools/power turbostat: Make extensible via the --add parameter tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz tools/power turbostat: line up headers when -M is used tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding tools/power turbostat: Support Knights Mill (KNM) tools/power turbostat: Display HWP OOB status tools/power turbostat: fix Denverton BCLK tools/power turbostat: use intel-family.h model strings tools/power/turbostat: Add Denverton RAPL support tools/power/turbostat: Add Denverton support tools/power/turbostat: split core MSR support into status + limit tools/power turbostat: fix error case overflow read of slm_freq_table[] tools/power turbostat: Allocate correct amount of fd and irq entries tools/power turbostat: switch to tab delimited output tools/power turbostat: Gracefully handle ACPI S3 tools/power turbostat: tidy up output on Joule counter overflow
-
Nicholas Piggin authored
Add a new page flag, PageWaiters, to indicate the page waitqueue has tasks waiting. This can be tested rather than testing waitqueue_active which requires another cacheline load. This bit is always set when the page has tasks on page_waitqueue(page), and is set and cleared under the waitqueue lock. It may be set when there are no tasks on the waitqueue, which will cause a harmless extra wakeup check that will clears the bit. The generic bit-waitqueue infrastructure is no longer used for pages. Instead, waitqueues are used directly with a custom key type. The generic code was not flexible enough to have PageWaiters manipulation under the waitqueue lock (which simplifies concurrency). This improves the performance of page lock intensive microbenchmarks by 2-3%. Putting two bits in the same word opens the opportunity to remove the memory barrier between clearing the lock bit and testing the waiters bit, after some work on the arch primitives (e.g., ensuring memory operand widths match and cover both bits). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicholas Piggin authored
A page is not added to the swap cache without being swap backed, so PageSwapBacked mappings can use PG_owner_priv_1 for PageSwapCache. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
No point in going through loops and hoops instead of just comparing the values. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
-
Thomas Gleixner authored
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
-
Thomas Gleixner authored
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
-
Thomas Gleixner authored
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
-
Thomas Gleixner authored
The mpic is either the main interrupt controller or is cascaded behind a GIC. The mpic is single instance and the modes are mutually exclusive, so there is no reason to have seperate cpu hotplug states. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/20161221192112.333161745@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
Even if both drivers are compiled in only one instance can run on a given system depending on the available GIC version. So having seperate hotplug states for them is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.252416267@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
Even if both drivers are compiled in only one instance can run on a given system depending on the available tracer cell. So having seperate hotplug states for them is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/20161221192112.162765484@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
hotcpu_notifier(), cpu_notifier(), __hotcpu_notifier(), __cpu_notifier(), register_hotcpu_notifier(), register_cpu_notifier(), __register_hotcpu_notifier(), __register_cpu_notifier(), unregister_hotcpu_notifier(), unregister_cpu_notifier(), __unregister_hotcpu_notifier(), __unregister_cpu_notifier() are unused now. Remove them and all related code. Remove also the now pointless cpu notifier error injection mechanism. The states can be executed step by step and error rollback is the same as cpu down, so any state transition can be tested w/o requiring the notifier error injection. Some CPU hotplug states are kept as they are (ab)used for hotplug state tracking. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20161221192112.005642358@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Anna-Maria Gleixner authored
Install the callbacks via the state machine. No functional change. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: devel@driverdev.osuosl.org Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: rt@linutronix.de Cc: lustre-devel@lists.lustre.org Link: http://lkml.kernel.org/r/20161202110027.htzzeervzkoc4muv@linutronix.de Link: http://lkml.kernel.org/r/20161221192111.922872524@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Sebastian Andrzej Siewior authored
Install the callbacks via the state machine. No functional change. This is the minimal fixup so we can remove the hotplug notifier mess completely. The real rework of this driver to use work queues is still stuck in review/testing on the SCSI mailing list. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: Johannes Thumshirn <jth@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20161221192111.836895753@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Sebastian Andrzej Siewior authored
Install the callbacks via the state machine. No functional change. This is the minimal fixup so we can remove the hotplug notifier mess completely. The real rework of this driver to use work queues is still stuck in review/testing on the SCSI mailing list. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: Johannes Thumshirn <jth@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20161221192111.757309869@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
Developers manage to overwrite states blindly without thought. That's fatal and hard to debug. Add sanity checks to make it fail. This requries to restructure the code so that the dynamic state allocation happens in the same lock protected section as the actual store. Otherwise the previous assignment of 'Reserved' to the name field would trigger the overwrite check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192111.675234535@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-