Remove the legacy protocol flag that was used to suppress sending the
control disconnected operation.

Instead rely on the fact that no control operations will be sent by
core to an interface that has been removed (e.g. after having received a
new hotplug event after the bootrom has jumped to the new image).
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Bundle drivers *must* disable their connections in the disconnect
callback, but add a defensive test and warn about buggy drivers
nonetheless.

Note that bundle drivers would generally release their state containers
in disconnect so a failure stop I/O could potentially lead to
use-after-free bugs in any late operation completion callbacks.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Disable and flush incoming operations before calling driver disconnect.

Bundle drivers are still responsible for disabling their connections
in their disconnect callback.

Note that specifically the legacy protocols must have incoming
operations disabled when their connection_exit callback is called as
that is where their state is deallocated.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add helper to disable and flush incoming operations.

This is intended to be used by core to flush any incoming requests
before calling driver disconnect, but could potentially later be
exported for driver use as well.

Note that we currently flush all incoming operation and allow the
request handlers to run, but cancel any responses sent. This may need to
be refined later.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add a new connection state ENABLED_TX in which only outgoing operations
are allowed.

This allows drivers to query the device during probe before allocating
their state containers without having to worry about racing incoming
requests.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add connection mutex to protect connection enabling and disabling.

This is needed to eventually allow drivers to manage the state of their
connections during operation (i.e. post probe and pre disconnect).
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Make sure to cancel all (incoming) operations when failing to enable a
connection.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Move helper to cancel active operations above gb_connection_enable and
simplify locking.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Always cancel all operations on connection disable and remove the now
unused DESTROYING state.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add a connection request-handler field to struct gb_connection that is
set when the connection is enabled.

This is a step towards removing the legacy protocol abstraction from
core, and will also be used to implement unidirectional connection
states (e.g. only outgoing operations are allowed).
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove implicit disable of legacy connections from the destructor.

This is a step towards removing the legacy-protocol handling from core.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Rename legacy connection init and exit functions.

This is a step towards removing the legacy-protocol handling from core.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add the first Greybus bundle driver that will be used when transitioning
from legacy Greybus protocols to bundle drivers.

The legacy-protocol driver initially binds to all current bundle classes.

In order to avoid having to update current module-loading scripts, keep
this driver internal to greybus core at least until modalias support is
added. Note that this prevents unloading any protocol drivers without
first tearing down the host device due to a circular module dependency.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Interface has been changed.
return code will not return number of configured streams but
just error code.
Number of streams is passed as pointer and if operation result
is changed number of streams will be updated.

Flags are also used for information regarding configure stream
operation result.
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Update gb interface and export flags needed for latest
protocol version. Number of streams also can be changed
based on operation result.
Caller sets input flags, end fucntion return output
flags

Input flags supported:
- GB_CAMERA_IN_FLAG_TEST - Need to be set when operation
is not actually applied.

Output flags supported:
- GB_CAMERA_OUT_FLAG_ADJUSTED - This is result of the operation
if this flag is set, result is adjusted and operation
need to be repeat.
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Due to some issues with handling colons in Android (and possibly
future exposure to other problems) we should remove the colons from
the firmware file request.  Replacing them with underscores.

Specifically, we copy firmware into the Android build using a line
similar to this:
PRODUCT_COPY_FILES += \
    source-repo/ara:00000126:00001000:00000001:00000001:02.tftf:system/etc/firmware/ara:00000126:00001000:00000001:00000001:02.tftf

There is a colon delimiter between the source and destination in the
PRODUCT_COPY_FILES format.  The greybus naming logic breaks the parsing
routine and generates an Android build break.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This reverts commit 48cc91e52dba9abad4c9b56f911994c65071bfc4 as the
caller should be changed instead.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Configure streams ret code should be number of streams in
gb operation exported to HOST camera.
Until gb operation is migrated to new interface return
number of streams in ret code.
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

And return the response num_streams field through a pointer variable
instead of using the return value of the function as both an error code
and a positive number of streams, it makes the API more consistent.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

driver_name associated with dev_name was hard coded earlier.
This limits, audio codec module to be detected on Port#5 only.

Now, driver_name is generated dynamically based on dev_name.
This enables codec module detection on any 1x2 slot.

Also, Update dev_id based on slot number, instead of bundle->id.
bundle->id is not unique for multiple modules added, thus now
using slot number for unique identification.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We need to clean up GB protocl connections, otherwise successive
codec insertions fails repeatedly.

NOTE: As per suggestion, since codec is already removed, one should
not trigger any GB command. It'll cause a delay of atleast TIMEOUT
value.
HOwever, failing to cleanup GB protocol, causes successive module
insertion to fail
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Replace unnecessary dev_err msg with dev_dbg.
Same were added during development to trace topology
parser progress.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

GB-Audio-manager module is currently used to report uevent
to above layer in response to any codec module inserted or
removed.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

GB Audio class driver provides APIs to configure GB codec module.
This patch adds relevant operations in DAI ops callback functions to
configure codec module as per DAPM sequence triggered.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For each GB codec module inserted, DAPM widgets, kcontrols, routes
and DAIs can be fetched through greybus in a binary chunk and parsed
locally to create & populate DAPM graph for the specific module.

It is required by each codec module to populate a minimum set of
kcontrols with fixed names to support basic audio usecase.
To support advanced features of codec module, the same can be polpulated
with existing topology parser. However, to use them for different usecase
separate mechanism (may be via MSP) is required to inform userspace about
their configuration value & enable/disable sequence.

ToDos:
Currently, support for enumerated kcontrol/dapm control is hardcoded.
Need to add complete logic within the parser.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Use GB Audio mgmt, data protocol ids to register codec module with
GB protocol. And in response to mgmt->connection_init(), register
GB codec driver with ASoC.

Now, using msm8994  machine to register DAI link dynamically on
codec insertion.

ToDos:
- snd_soc_register_codec() uses driver->name to identify device id.
  However, for GB device, .driver{} is not yet populated by GB core.
  Thus, defining dummy structure within codec driver. This should
  come from GB core itself.
  Even existing .driver{} may cause problem in case of multiple
  modules inserted or inserted at a different slot.
- Fix logic for gbcodec->dais & gbcodec->dailinks. Current
  implementation contains some hard coded data with assumption of
  count=1.
- Evaluate definition of 'gbaudio_dailink.be_id' in case of multiple
  DAI links.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We really only want to build the module if the config is set, not all
the time like the current code does.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Added CONFIG_XXX flag check before compiling audio module.
Once we add dynamic DAI link registration from audio driver,
this check wil be required to avoid compilation failures with
other kernel revisions.

Also, renamed header file to better align with .c file name.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is a simple module that keeps a list of connected GB audio
modules.

Whenever a device is attached, an appropriate uevent is sent to
userspace:

    UDEV  [4941.803215] add      /kernel/gb_audio_manager/0 (gb_audio_manager)
    ACTION=add
    CPORT=99
    DEVICES=0x10
    DEVPATH=/kernel/gb_audio_manager/0
    NAME=naim
    PID=64
    SEQNUM=1828
    SLOT=2
    SUBSYSTEM=gb_audio_manager
    USEC_INITIALIZED=802416
    VID=128

And whenever removed:

    UDEV  [4941.836588] remove   /kernel/gb_audio_manager/0 (gb_audio_manager)
    ACTION=remove
    DEVPATH=/kernel/gb_audio_manager/0
    SEQNUM=1833
    SUBSYSTEM=gb_audio_manager
    USEC_INITIALIZED=835681

The API consists of functions for adding, removing and inspecting
added device module descriptions (struct gb_audio_module):

    int                         gb_audio_manager_add(struct gb_audio_module_descriptor *desc);
    int                         gb_audio_manager_remove(int id);
    int                         gb_audio_manager_remove_all(void);
    struct  gb_audio_module*    gb_audio_manager_get_module(int id);
    void                        gb_audio_manager_put_module(struct gb_audio_module *module);
    int                         gb_audio_manager_dump_module(int id);
    void                        gb_audio_manager_dump_all(void);

Devices can be inspected through sysfs in /sys/kernel/gb_audio_manager/{id}/*

If GB_AUDIO_MANAGER_SYSFS is exported as 'true', managing devices can be done
via the SYSFS as well. For instance:

    echo name=naim slot=2 vid=128 pid=64 cport=99 devices=0x10 > /sys/kernel/gb_audio_manager/add
    echo all > /sys/kernel/gb_audio_manager/dump
    echo 2 > /sys/kernel/gb_audio_manager/dump
    echo 2 > /sys/kernel/gb_audio_manager/remove
Signed-off-by: Svetlin Ankov <ankov_svetlin@projectara.com>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The latest audio architecture does not stream audio data over the
USB link between the AP and APBridgeA.  Instead, audio data is
streamed directly over the I2S link between the two.

To support the Greybus audio driver in setting up the I2S port and
controling packeting/depacketizing of audio data to/from Greybus
audio messages, define a set of commands and their parameters.
These commands and parameters will be placed into a request and sent
over the USB control channel to APBridgeA.  A corresponding driver
on APBridgeA will receive and process the requests.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add helper routines to make communicating with audio modules easier.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add the macros and structures for the Greybus Audio Device
Class Protocol.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For consistency with most other files in the Greybus repository,
change 'audio-codec.c' to use an underscore instead of a hyphen
in its name.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

It makes more sense to enable the clock after power is enabled
to the device, so move clock enable code after regulator_enable
and setting up BOOT_RET pin.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Tested-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This change implements gb camera interface and register
gb camera to the HOST driver.
This implementation need to be reworked after the demo.

Tested with db3 with two camera modules.
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Gb camera need to communicate with HOST driver.
as temporary solution there will be shared header
between gb camera HOST camera.
Both need to be in sync since gb drivers are compiled
out of the kernel tree.

Gb camera register camera operation functions when is created.
Currently unregister is not supported.
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In kernel v4.5 there is a change in LED api, which remove the need for
individual work queue and rename the set_sync operation to set_blocking.
This patch add the handling of this case and avoid compilation failure
for this kernel versions.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In v4.5 the LED API is changed related to the set brightness
operations, set_sync is removed and the workqueue handling is now done
by leds core, so no need for individual drivers to have one.
This will be done by removing the SET_SYNC macro and add a new
SET_BLOCKING.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This adds the GREYBUS_ID environment variable to all interface uevents
to let userspace know the vendor/product id of the module interface that
has been added or removed from the system.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

To support key events coming from the svc (ara key) it is needed to add
the input core as an required config option.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>