The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.

To fix this possible bug, n is checked after being used.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fl_flow_key structure is around 500 bytes, so having two of them
on the stack in one function now exceeds the warning limit after an
otherwise correct change:

net/sched/cls_flower.c:298:12: error: stack frame size of 1056 bytes in function 'fl_classify' [-Werror,-Wframe-larger-than=]

I suspect the fl_classify function could be reworked to only have one
of them on the stack and modify it in place, but I could not work out
how to do that.

As a somewhat hacky workaround, move one of them into an out-of-line
function to reduce its scope. This does not necessarily reduce the stack
usage of the outer function, but at least the second copy is removed
from the stack during most of it and does not add up to whatever is
called from there.

I now see 552 bytes of stack usage for fl_classify(), plus 528 bytes
for fl_mask_lookup().

Fixes: 58cff782 ("flow_dissector: Parse multiple MPLS Label Stack Entries")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Microchip lan7431 is frequently connected to a phy. However, it
can also be directly connected to a MII remote peer without
any phy in between. For supporting such a phyless hardware setup
in Linux we utilized phylib, which supports a fixed-link
configuration via the device tree. And we added support for
defining the connection type R/GMII in the device tree.

New behavior:
-------------
. The automatic speed and duplex detection of the lan743x silicon
  between mac and phy is disabled. Instead phylib is used like in
  other typical Linux drivers. The usage of phylib allows to
  specify fixed-link parameters in the device tree.

. The device tree entry phy-connection-type is supported now with
  the modes RGMII or (G)MII (default).

Development state:
------------------
. Tested with fixed-phy configurations. Not yet tested in normal
  configurations with phy. Microchip kindly offered testing
  as soon as the Corona measures allow this.

. All review findings of Andrew Lunn are included

Example:
--------
&pcie {
	status = "okay";

	host@0 {
		reg = <0 0 0 0 0>;

		#address-cells = <3>;
		#size-cells = <2>;

		ethernet@0 {
			compatible = "weyland-yutani,noscom1", "microchip,lan743x";
			status = "okay";
			reg = <0 0 0 0 0>;
			phy-connection-type = "rgmii";

			fixed-link {
				speed = <100>;
				full-duplex;
			};
		};
	};
};
Signed-off-by: Roelof Berg <rberg@berg-solutions.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
devlink: Add support for control packet traps

So far device drivers were only able to register drop and exception
packet traps with devlink. These traps are used for packets that were
either dropped by the underlying device or encountered an exception
(e.g., missing neighbour entry) during forwarding.

However, in the steady state, the majority of the packets being trapped
to the CPU are packets that are required for the correct functioning of
the control plane. For example, ARP request and IGMP query packets.

This patch set allows device drivers to register such control traps with
devlink and expose their default control plane policy to user space.
User space can then tune the packet trap policer settings according to
its needs, as with existing packet traps.

In a similar fashion to exception traps, the action associated with such
traps cannot be changed as it can easily break the control plane. Unlike
drop and exception traps, packets trapped via control traps are not
reported to the kernel's drop monitor as they are not indicative of any
problem.

Patch set overview:

Patches #1-#3 break out layer 3 exceptions to a different group to
provide better granularity. A future patch set will make this completely
configurable.

Patch #4 adds a new trap action ('mirror') that is used for packets that
are forwarded by the device and sent to the CPU. Such packets are marked
by device drivers with 'skb->offload_fwd_mark = 1' in order to prevent
the kernel from forwarding them again.

Patch #5 adds the new trap type, 'control'.

Patches #6-#8 gradually add various control traps to devlink with proper
documentation.

Patch #9 adds a few control traps to netdevsim, which are automatically
exercised by existing devlink-trap selftest.

Patches #10 performs small refactoring in mlxsw.

Patches #11-#13 change mlxsw to register its existing control traps with
devlink.

Patch #14 adds a selftest over mlxsw that exercises all the registered
control traps.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Generate packets matching the various control traps and check that the
traps' stats increase accordingly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a similar fashion to other control traps, register ACL control traps
with devlink.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a similar fashion to layer 2 control traps, register layer 3 control
traps with devlink.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a similar fashion to other traps, register layer 2 control traps with
devlink.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently have an Rx listener function for exception traps that marks
received skbs with 'offload_fwd_mark' and injects them to the kernel's
Rx path. The marking is done because all these exceptions occur during
L3 forwarding, after the packets were potentially flooded at L2.

A subsequent patch will add support for control traps. Packets received
via some of these control traps need different handling:

1. Packets might not need to be marked with 'offload_fwd_mark'. For
   example, if packet was trapped before L2 forwarding

2. Packets might not need to be injected to the kernel's Rx path. For
   example, sampled packets are reported to user space via the psample
   module

Factor out a common Rx listener function that only reports trapped
packets to devlink. Call it from mlxsw_sp_rx_no_mark_listener() and
mlxsw_sp_rx_mark_listener() that will inject the packets to the kernel's
Rx path, without and with the marking, respectively.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Register two control traps with devlink. The existing selftest at
tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh iterates
over all registered traps and checks that the action of non-drop traps
cannot be changed. Up until now only exception traps were tested, now
control traps will be tested as well.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add packet traps for packets that are sampled / trapped by ACLs, so that
capable drivers could register them with devlink. Add documentation for
every added packet trap and packet trap group.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add layer 3 control packet traps such as ARP and DHCP, so that capable
device drivers could register them with devlink. Add documentation for
every added packet trap and packet trap group.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add layer 2 control packet traps such as STP and IGMP query, so that
capable device drivers could register them with devlink. Add
documentation for every added packet trap and packet trap group.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This type is used for traps that trap control packets such as ARP
request and IGMP query to the CPU.

Do not report such packets to the kernel's drop monitor as they were not
dropped by the device no encountered an exception during forwarding.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The action is used by control traps such as IGMP query. The packet is
flooded by the device, but also trapped to the CPU in order for the
software bridge to mark the receiving port as a multicast router port.
Such packets are marked with 'skb->offload_fwd_mark = 1' in order to
prevent the software bridge from flooding them again.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The layer 3 exceptions are still subject to the same trap policer, so
nothing changes, but user space can choose to assign a different one.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The layer 3 exceptions are still subject to the same trap policer, so
nothing changes, but user space can choose to assign a different one.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Packets that hit exceptions during layer 3 forwarding must be trapped to
the CPU for the control plane to function properly. Create a dedicated
group for them, so that user space could choose to assign a different
policer for them.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next
to extend ctnetlink and the flowtable infrastructure:

1) Extend ctnetlink kernel side netlink dump filtering capabilities,
   from Romain Bellan.

2) Generalise the flowtable hook parser to take a hook list.

3) Pass a hook list to the flowtable hook registration/unregistration.

4) Add a helper function to release the flowtable hook list.

5) Update the flowtable event notifier to pass a flowtable hook list.

6) Allow users to add new devices to an existing flowtables.

7) Allow users to remove devices to an existing flowtables.

8) Allow for registering a flowtable with no initial devices.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When enable clk_ref failed, clk_ptp should be disabled rather than
clk_ref itself.
Signed-off-by: Liu Xiang <liuxiang_1999@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The removal of mips_swiotlb_ops exposed a problem in octeon_mgmt Ethernet
driver. mips_swiotlb_ops had an mb() after most of the operations and the
removal of the ops had broken the receive functionality of the driver.
My code inspection has shown no other places except
octeon_mgmt_rx_fill_ring() where an explicit barrier would be obviously
missing. The latter function however has to make sure that "ringing the
bell" doesn't happen before RX ring entry is really written.

The patch has been successfully tested on Octeon II.

Fixes: a999933d ("MIPS: remove mips_swiotlb_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
the indirect flow_block infrastructure, revisited

This series fixes b5140a36 ("netfilter: flowtable: add indr block
setup support") that adds support for the indirect block for the
flowtable. This patch crashes the kernel with the TC CT action.

[  630.908086] BUG: kernel NULL pointer dereference, address: 00000000000000f0
[  630.908233] #PF: error_code(0x0000) - not-present page
[  630.908304] PGD 800000104addd067 P4D 800000104addd067 PUD 104311d067 PMD 0
[  630.908380] Oops: 0000 [#1] SMP PTI [  630.908615] RIP: 0010:nf_flow_table_indr_block_cb+0xc0/0x190 [nf_flow_table]
[  630.908690] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 4c 89 75 a0 4c 89 65 a8 4d 89 ee 49 89 dd 4c 89 fe 48 c7 c7 b7 64 36 a0 31 c0 e8 ce ed d8 e0 <49> 8b b7 f0 00 00 00 48 c7 c7 c8 64      36 a0 31 c0 e8 b9 ed d8 e0 49[  630.908790] RSP: 0018:ffffc9000895f8c0 EFLAGS: 00010246
[...]
[  630.910774] Call Trace:
[  630.911192]  ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core]
[  630.911621]  ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core]
[  630.912040]  ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core]
[  630.912443]  flow_block_cmd+0x51/0x80
[  630.912844]  __flow_indr_block_cb_register+0x26c/0x510
[  630.913265]  mlx5e_nic_rep_netdevice_event+0x9e/0x110 [mlx5_core]
[  630.913665]  notifier_call_chain+0x53/0xa0
[  630.914063]  raw_notifier_call_chain+0x16/0x20
[  630.914466]  call_netdevice_notifiers_info+0x39/0x90
[  630.914859]  register_netdevice+0x484/0x550
[  630.915256]  __ip_tunnel_create+0x12b/0x1f0 [ip_tunnel]
[  630.915661]  ip_tunnel_init_net+0x116/0x180 [ip_tunnel]
[  630.916062]  ipgre_tap_init_net+0x22/0x30 [ip_gre]
[  630.916458]  ops_init+0x44/0x110
[  630.916851]  register_pernet_operations+0x112/0x200

A workaround patch to cure this crash has been proposed. However, there
is another problem: The indirect flow_block still does not work for the
new TC CT action. The problem is that the existing flow_indr_block_entry
callback assumes you can look up for the flowtable from the netdevice to
get the flow_block. This flow_block allows you to offload the flows via
TC_SETUP_CLSFLOWER. Unfortunately, it is not possible to get the
flow_block from the TC CT flowtables because they are _not_ bound to any
specific netdevice.

= What is the indirect flow_block infrastructure?

The indirect flow_block infrastructure allows drivers to offload
tc/netfilter rules that belong to software tunnel netdevices, e.g.
vxlan.

This indirect flow_block infrastructure relates tunnel netdevices with
drivers because there is no obvious way to relate these two things
from the control plane.

= How does the indirect flow_block work before this patchset?

Front-ends register the indirect block callback through
flow_indr_add_block_cb() if they support for offloading tunnel
netdevices.

== Setting up an indirect block

1) Drivers track tunnel netdevices via NETDEV_{REGISTER,UNREGISTER} events.
   If there is a new tunnel netdevice that the driver can offload, then the
   driver invokes __flow_indr_block_cb_register() with the new tunnel
   netdevice and the driver callback. The __flow_indr_block_cb_register()
   call iterates over the list of the front-end callbacks.

2) The front-end callback sets up the flow_block_offload structure and it
   invokes the driver callback to set up the flow_block.

3) The driver callback now registers the flow_block structure and it
   returns the flow_block back to the front-end.

4) The front-end gets the flow_block object and it is now ready to
   offload rules for this tunnel netdevice.

A simplified callgraph is represented below.

        Front-end                      Driver

                                   NETDEV_REGISTER
                                         |
                     __flow_indr_block_cb_register(netdev, cb_priv, driver_cb)
                                         | [1]
            .--------------frontend_indr_block_cb(cb_priv, driver_cb)
            |
            .
   setup_flow_block_offload(bo)
            | [2]
       driver_cb(bo, cb_priv) -----------.
                                         |
                                         \/
                                  set up flow_blocks [3]
                                         |
      add rules to flow_block <----------
      TC_SETUP_CLSFLOWER [4]

== Releasing the indirect flow_block

There are two possibilities, either tunnel netdevice is removed or
a netdevice (port representor) is removed.

=== Tunnel netdevice is removed

Driver waits for the NETDEV_UNREGISTER event that announces the tunnel
netdevice removal. Then, it calls __flow_indr_block_cb_unregister() to
remove the flow_block and rules.  Callgraph is very similar to the one
described above.

=== Netdevice is removed (port representor)

Driver calls __flow_indr_block_cb_unregister() to remove the existing
netfilter/tc rule that belong to the tunnel netdevice.

= How does the indirect flow_block work after this patchset?

Drivers register the indirect flow_block setup callback through
flow_indr_dev_register() if they support for offloading tunnel
netdevices.

== Setting up an indirect flow_block

1) Frontends check if dev->netdev_ops->ndo_setup_tc is unset. If so,
   frontends call flow_indr_dev_setup_offload(). This call invokes
   the drivers' indirect flow_block setup callback.

2) The indirect flow_block setup callback sets up a flow_block structure
   which relates the tunnel netdevice and the driver.

3) The front-end uses flow_block and offload the rules.

Note that the operational to set up (non-indirect) flow_block is very
similar.

== Releasing the indirect flow_block

=== Tunnel netdevice is removed

This calls flow_indr_dev_setup_offload() to set down the flow_block and
remove the offloaded rules. This alternate path is exercised if
dev->netdev_ops->ndo_setup_tc is unset.

=== Netdevice is removed (port representor)

If a netdevice is removed, then it might need to to clean up the
offloaded tc/netfilter rules that belongs to the tunnel netdevice:

1) The driver invokes flow_indr_dev_unregister() when a netdevice is
   removed.

2) This call iterates over the existing indirect flow_blocks
   and it invokes the cleanup callback to let the front-end remove the
   tc/netfilter rules. The cleanup callback already provides the
   flow_block that the front-end needs to clean up.

        Front-end                      Driver

                                         |
                            flow_indr_dev_unregister(...)
                                         |
                         iterate over list of indirect flow_block
                               and invoke cleanup callback
                                         |
            .-----------------------------
            |
            .
   frontend_flow_block_cleanup(flow_block)
            .
            |
           \/
   remove rules to flow_block
      TC_SETUP_CLSFLOWER

= About this patchset

This patchset aims to address the existing TC CT problem while
simplifying the indirect flow_block infrastructure. Saving 300 LoC in
the flow_offload core and the drivers. The operational gets aligned with
the (non-indirect) flow_blocks logic. Patchset is composed of:

Patch #1 add nf_flow_table_gc_cleanup() which is required by the
         netfilter's flowtable new indirect flow_block approach.

Patch #2 adds the flow_block_indr object which is actually part of
         of the flow_block object. This stores the indirect flow_block
         metadata such as the tunnel netdevice owner and the cleanup
         callback (in case the tunnel netdevice goes away).

         This patch adds flow_indr_dev_{un}register() to allow drivers
         to offer netdevice tunnel hardware offload to the front-ends.
         Then, front-ends call flow_indr_dev_setup_offload() to invoke
         the drivers to set up the (indirect) flow_block.

Patch #3 add the tcf_block_offload_init() helper function, this is
         a preparation patch to adapt the tc front-end to use this
         new indirect flow_block infrastructure.

Patch #4 updates the tc and netfilter front-ends to use the new
         indirect flow_block infrastructure.

Patch #5 updates the mlx5 driver to use the new indirect flow_block
         infrastructure.

Patch #6 updates the nfp driver to use the new indirect flow_block
         infrastructure.

Patch #7 updates the bnxt driver to use the new indirect flow_block
         infrastructure.

Patch #8 removes the indirect flow_block infrastructure version 1,
         now that frontends and drivers have been translated to
         version 2 (coming in this patchset).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers do not register to netdev events to set up indirect blocks
anymore. Remove __flow_indr_block_cb_register() and
__flow_indr_block_cb_unregister().

The frontends set up the callbacks through flow_indr_dev_setup_block()
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Register ndo callback via flow_indr_dev_register() and
flow_indr_dev_unregister().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Register ndo callback via flow_indr_dev_register() and
flow_indr_dev_unregister().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Register ndo callback via flow_indr_dev_register() and
flow_indr_dev_unregister().

No need for mlx5e_rep_indr_clean_block_privs() since flow_block_cb_free()
already releases the internal mapping via ->release callback, which in
this case is mlx5e_rep_indr_tc_block_unbind().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update existing frontends to use flow_indr_dev_setup_offload().

This new function must be called if ->ndo_setup_tc is unset to deal
with tunnel devices.

If there is no driver that is subscribed to new tunnel device
flow_block bindings, then this function bails out with EOPNOTSUPP.

If the driver module is removed, the ->cleanup() callback removes the
entries that belong to this tunnel device. This cleanup procedures is
triggered when the device unregisters the tunnel device offload handler.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper function to initialize the flow_block_offload structure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tunnel devices provide no dev->netdev_ops->ndo_setup_tc(...) interface.
The tunnel device and route control plane does not provide an obvious
way to relate tunnel and physical devices.

This patch allows drivers to register a tunnel device offload handler
for the tc and netfilter frontends through flow_indr_dev_register() and
flow_indr_dev_unregister().

The frontend calls flow_indr_dev_setup_offload() that iterates over the
list of drivers that are offering tunnel device hardware offload
support and it sets up the flow block for this tunnel device.

If the driver module is removed, the indirect flow_block ends up with a
stale callback reference. The module removal path triggers the
dev_shutdown() path to remove the qdisc and the flow_blocks for the
physical devices. However, this is not useful for tunnel devices, where
relation between the physical and the tunnel device is not explicit.

This patch introduces a cleanup callback that is invoked when the driver
module is removed to clean up the tunnel device flow_block. This patch
defines struct flow_block_indr and it uses it from flow_block_cb to
store the information that front-end requires to perform the
flow_block_cb cleanup on module removal.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function schedules the flow teardown state and it forces a gc run.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

trying to configure TC 'act_gate' rules with invalid control actions, the
following splat can be observed:

 general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
 KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
 CPU: 1 PID: 2143 Comm: tc Not tainted 5.7.0-rc6+ #168
 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
 RIP: 0010:hrtimer_active+0x56/0x290
 [...]
  Call Trace:
  hrtimer_try_to_cancel+0x6d/0x330
  hrtimer_cancel+0x11/0x20
  tcf_gate_cleanup+0x15/0x30 [act_gate]
  tcf_action_cleanup+0x58/0x170
  __tcf_action_put+0xb0/0xe0
  __tcf_idr_release+0x68/0x90
  tcf_gate_init+0x7c7/0x19a0 [act_gate]
  tcf_action_init_1+0x60f/0x960
  tcf_action_init+0x157/0x2a0
  tcf_action_add+0xd9/0x2f0
  tc_ctl_action+0x2a3/0x39d
  rtnetlink_rcv_msg+0x5f3/0x920
  netlink_rcv_skb+0x121/0x350
  netlink_unicast+0x439/0x630
  netlink_sendmsg+0x714/0xbf0
  sock_sendmsg+0xe2/0x110
  ____sys_sendmsg+0x5b4/0x890
  ___sys_sendmsg+0xe9/0x160
  __sys_sendmsg+0xd3/0x170
  do_syscall_64+0x9a/0x370
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

this is caused by hrtimer_cancel(), running before hrtimer_init(). Fix it
ensuring to call hrtimer_cancel() only if clockid is valid, and the timer
has been initialized. After fixing this splat, the same error path causes
another problem:

 general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
 CPU: 1 PID: 980 Comm: tc Not tainted 5.7.0-rc6+ #168
 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
 RIP: 0010:release_entry_list+0x4a/0x240 [act_gate]
 [...]
 Call Trace:
  tcf_action_cleanup+0x58/0x170
  __tcf_action_put+0xb0/0xe0
  __tcf_idr_release+0x68/0x90
  tcf_gate_init+0x7ab/0x19a0 [act_gate]
  tcf_action_init_1+0x60f/0x960
  tcf_action_init+0x157/0x2a0
  tcf_action_add+0xd9/0x2f0
  tc_ctl_action+0x2a3/0x39d
  rtnetlink_rcv_msg+0x5f3/0x920
  netlink_rcv_skb+0x121/0x350
  netlink_unicast+0x439/0x630
  netlink_sendmsg+0x714/0xbf0
  sock_sendmsg+0xe2/0x110
  ____sys_sendmsg+0x5b4/0x890
  ___sys_sendmsg+0xe9/0x160
  __sys_sendmsg+0xd3/0x170
  do_syscall_64+0x9a/0x370
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

the problem is similar: tcf_action_cleanup() was trying to release a list
without initializing it first. Ensure that INIT_LIST_HEAD() is called for
every newly created 'act_gate' action, same as what was done to 'act_ife'
with commit 44c23d71 ("net/sched: act_ife: initalize ife->metalist
earlier").

Fixes: a51c328d ("net: qos: introduce a gate control flow action")
CC: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bartosz Golaszewski says:

====================
regmap: provide simple bitops and use them in a driver

I noticed that oftentimes I use regmap_update_bits() for simple bit
setting or clearing. In this case the fourth argument is superfluous as
it's always 0 or equal to the mask argument.

This series proposes to add simple bit operations for setting, clearing
and testing specific bits with regmap.

The second patch uses all three in a driver that got recently picked into
the net-next tree.

The patches obviously target different trees so - if you're ok with
the change itself - I propose you pick the first one into your regmap
tree for v5.8 and then I'll resend the second patch to add the first
user for these macros for v5.9.

v1 -> v2:
- convert the new macros to static inline functions

v2 -> v3:
- drop unneeded ternary operator
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Shrink the code visually by replacing regmap_update_bits() with
appropriate regmap bit operations where applicable.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In many instances regmap_update_bits() is used for simple bit setting
and clearing. In these cases the last argument is redundant and we can
hide it with a static inline function.

This adds three new helpers for simple bit operations: set_bits,
clear_bits and test_bits (the last one defined as a regular function).
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The caller doesn't care about the error codes, they only check for zero
vs non-zero.  Still, it's better to preserve the negative error codes
from alloc_uld_rxqs() instead of changing it to 1.  We can also return
directly if there is a failure.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
Fix infinite loop in bridge and vxlan modules

When suppressing invalid IPv6 Neighbour Solicitation messages, it is
possible for the bridge and vxlan modules to get stuck in an infinite
loop. See the individual changelogs for detailed explanation of the
problem and solution.

The bug was originally reported against the bridge module, but after
auditing the code base I found that the buggy code was copied from the
vxlan module. This patch set fixes both modules. Could not find more
instances of the problem.

Please consider both patches for stable releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When proxy mode is enabled the vxlan device might reply to Neighbor
Solicitation (NS) messages on behalf of remote hosts.

In case the NS message includes the "Source link-layer address" option
[1], the vxlan device will use the specified address as the link-layer
destination address in its reply.

To avoid an infinite loop, break out of the options parsing loop when
encountering an option with length zero and disregard the NS message.

This is consistent with the IPv6 ndisc code and RFC 4886 which states
that "Nodes MUST silently discard an ND packet that contains an option
with length zero" [2].

[1] https://tools.ietf.org/html/rfc4861#section-4.3
[2] https://tools.ietf.org/html/rfc4861#section-4.6

Fixes: 4b29dba9 ("vxlan: fix nonfunctional neigh_reduce()")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When neighbor suppression is enabled the bridge device might reply to
Neighbor Solicitation (NS) messages on behalf of remote hosts.

In case the NS message includes the "Source link-layer address" option
[1], the bridge device will use the specified address as the link-layer
destination address in its reply.

To avoid an infinite loop, break out of the options parsing loop when
encountering an option with length zero and disregard the NS message.

This is consistent with the IPv6 ndisc code and RFC 4886 which states
that "Nodes MUST silently discard an ND packet that contains an option
with length zero" [2].

[1] https://tools.ietf.org/html/rfc4861#section-4.3
[2] https://tools.ietf.org/html/rfc4861#section-4.6

Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alla Segal <allas@mellanox.com>
Tested-by: Alla Segal <allas@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After allocating the spare nexthop group it should be tested for kzalloc()
returning NULL, instead the already used nexthop group (which cannot be
NULL at this point) had been tested so far.

Additionally, if kzalloc() fails, return ERR_PTR(-ENOMEM) instead of NULL.

Coverity-id: 1463885
Reported-by: Coverity <scan-admin@coverity.com>
Signed-off-by: Patrick Eigensatz <patrickeigensatz@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2020-06-01

Here's one last bluetooth-next pull request for 5.8, which I hope can
still be accepted.

 - Enabled Wide-Band Speech (WBS) support for Qualcomm wcn3991
 - Multiple fixes/imprvovements to Qualcomm-based devices
 - Fix GAP/SEC/SEM/BI-10-C qualfication test case
 - Added support for Broadcom BCM4350C5 device
 - Several other smaller fixes & improvements

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>