The member @nr_addr_cmp is not a bool value, using operator '>'
instead to avoid unexpected failure.

Fixes: a77de263 ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-9-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Moving from using an address filter to trace the default "all addresses"
range to no filtering to acheive the same result, has caused the perf
filtering of kernel/user address spaces from not working unless an
explicit address filter was used.

This is due to the original code using a side-effect of the address
filtering rather than setting the global TRCVICTLR exception level
filtering.

The use of the mode sysfs file is also similarly affected.

A helper function is added to fix both instances.

Fixes: ae204151 ("coresight: etmv4: Update default filter and initialisation")
Reported-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-8-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Below BUG is triggered by call pm_runtime_get_sync() in
cti_cpuhp_enable_hw(). It's in CPU hotplug callback with interrupt
disabled. Pm_runtime_get_sync() calls clock driver to enable clock
which could sleep. Remove pm_runtime_get_sync() in cti_cpuhp_enable_hw()
since pm_runtime_get_sync() is called in cti_enabld and pm_runtime_put()
is called in cti_disabled. No need to increase pm count when CPU gets
online since it's not decreased when CPU is offline.

[  105.800279] BUG: scheduling while atomic: swapper/1/0/0x00000002
[  105.800290] Modules linked in:
[  105.800327] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W
5.9.0-rc1-gff1304be0a05-dirty #21
[  105.800337] Hardware name: Thundercomm Dragonboard 845c (DT)
[  105.800353] Call trace:
[  105.800414]  dump_backtrace+0x0/0x1d4
[  105.800439]  show_stack+0x14/0x1c
[  105.800462]  dump_stack+0xc0/0x100
[  105.800490]  __schedule_bug+0x58/0x74
[  105.800523]  __schedule+0x590/0x65c
[  105.800538]  schedule+0x78/0x10c
[  105.800553]  schedule_timeout+0x188/0x250
[  105.800585]  qmp_send.constprop.10+0x12c/0x1b0
[  105.800599]  qmp_qdss_clk_prepare+0x18/0x20
[  105.800622]  clk_core_prepare+0x48/0xd4
[  105.800639]  clk_prepare+0x20/0x34
[  105.800663]  amba_pm_runtime_resume+0x54/0x90
[  105.800695]  __rpm_callback+0xdc/0x138
[  105.800709]  rpm_callback+0x24/0x78
[  105.800724]  rpm_resume+0x328/0x47c
[  105.800739]  __pm_runtime_resume+0x50/0x74
[  105.800768]  cti_starting_cpu+0x40/0xa4
[  105.800795]  cpuhp_invoke_callback+0x84/0x1e0
[  105.800814]  notify_cpu_starting+0x9c/0xb8
[  105.800834]  secondary_start_kernel+0xd8/0x164
[  105.800933] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]

Fixes: e9b88058 ("coresight: cti: Add CPU Hotplug handling to CTI driver")
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-7-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Coresight_claim_device() is called in cti_starting_cpu() only
when CTI is enabled while coresight_disclaim_device() is called
uncontionally in cti_dying_cpu(). This triggered below WARNING.
Only call disclaim device when CTI device is enabled to fix it.

[   75.989643] WARNING: CPU: 1 PID: 14 at
kernel/drivers/hwtracing/coresight/coresight.c:209
coresight_disclaim_device_unlocked+0x10/0x24
[   75.989697] CPU: 1 PID: 14 Comm: migration/1 Not tainted
5.9.0-rc1-gff1304be0a05-dirty #21
[   75.989709] Hardware name: Thundercomm Dragonboard 845c (DT)
[   75.989737] pstate: 80c00085 (Nzcv daIf +PAN +UAO BTYPE=--)
[   75.989758] pc : coresight_disclaim_device_unlocked+0x10/0x24
[   75.989775] lr : coresight_disclaim_device+0x24/0x38
[   75.989783] sp : ffff800011cd3c90
.
[   75.990018] Call trace:
[   75.990041]  coresight_disclaim_device_unlocked+0x10/0x24
[   75.990066]  cti_dying_cpu+0x34/0x4c
[   75.990101]  cpuhp_invoke_callback+0x84/0x1e0
[   75.990121]  take_cpu_down+0x90/0xe0
[   75.990154]  multi_cpu_stop+0x134/0x160
[   75.990171]  cpu_stopper_thread+0xb0/0x13c
[   75.990196]  smpboot_thread_fn+0x1c4/0x270
[   75.990222]  kthread+0x128/0x154
[   75.990251]  ret_from_fork+0x10/0x18

Fixes: e9b88058 ("coresight: cti: Add CPU Hotplug handling to CTI driver")
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-6-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add ETMv4 periperhal ID for HiSilicon Hip08 and Hip09 platform. Hip08
contains ETMv4.2 device and Hip09 contains ETMv4.5 device.
Acked-by: Suzuki K Poulose <suzuki.oulose@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-5-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since port-numbers start from 0, add 1 to port-number to get the port
count.

Fix following crash when Coresight is enabled on ACPI based systems:

[   61.061736] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
[   61.135494] pc : acpi_coresight_parse_graph+0x1c4/0x37c
[   61.140705] lr : acpi_coresight_parse_graph+0x160/0x37c
[   61.145915] sp : ffff800012f4ba40
[   61.145917] x29: ffff800012f4ba40 x28: ffff00becce62f98
[   61.159896] x27: 0000000000000005 x26: ffff00becd8a7c88
[   61.165195] x25: ffff00becd8a7d88 x24: ffff00becce62f80
[   61.170492] x23: ffff800011ef99c0 x22: ffff009efb8bc010
[   61.175790] x21: 0000000000000018 x20: 0000000000000005
[   61.181087] x19: ffff00becce62e80 x18: 0000000000000020
[   61.186385] x17: 0000000000000001 x16: 00000000000002a8
[   61.191682] x15: ffff000838648550 x14: ffffffffffffffff
[   61.196980] x13: 0000000000000000 x12: ffff00becce62d87
[   61.202277] x11: 00000000ffffff76 x10: 000000000000002e
[   61.207575] x9 : ffff8000107e1a68 x8 : ffff00becce63000
[   61.212873] x7 : 0000000000000018 x6 : 000000000000003f
[   61.218170] x5 : 0000000000000000 x4 : 0000000000000000
[   61.223467] x3 : 0000000000000000 x2 : 0000000000000000
[   61.228764] x1 : ffff00becce62f80 x0 : 0000000000000000
[   61.234062] Call trace:
[   61.236497]  acpi_coresight_parse_graph+0x1c4/0x37c
[   61.241361]  coresight_get_platform_data+0xdc/0x130
[   61.246225]  tmc_probe+0x138/0x2dc
[   61.246227]  amba_probe+0xdc/0x220
[   61.255779]  really_probe+0xe8/0x49c
[   61.255781]  driver_probe_device+0xec/0x140
[   61.255782]  device_driver_attach+0xc8/0xd0
[   61.255785]  __driver_attach+0xac/0x180
[   61.265857]  bus_for_each_dev+0x78/0xcc
[   61.265859]  driver_attach+0x2c/0x40
[   61.265861]  bus_add_driver+0x150/0x244
[   61.265863]  driver_register+0x80/0x13c
[   61.273591]  amba_driver_register+0x60/0x70
[   61.273594]  tmc_driver_init+0x20/0x2c
[   61.281582]  do_one_initcall+0x50/0x230
[   61.281585]  do_initcalls+0x104/0x144
[   61.291831]  kernel_init_freeable+0x168/0x1dc
[   61.291834]  kernel_init+0x1c/0x120
[   61.299215]  ret_from_fork+0x10/0x18
[   61.299219] Code: b9400022 f9400660 9b277c42 8b020000 (f9400404)
[   61.307381] ---[ end trace 63c6c3d7ec6a9b7c ]---
[   61.315225] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Fixes: d375b356 ("coresight: Fix support for sparsely populated ports")
Reported-by: Ruediger Oertel <ro@suse.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-4-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

STP_PACKET_MARKED is not supported by STM currently.
Add STM_FLAG_MARKED to support marked packet in STM.
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-3-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

etm4_count keeps track of number of ETMv4 registered and on some systems,
a race is observed on etm4_count variable which can lead to multiple calls
to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls
cpuhp_store_callbacks() which prevents multiple registrations of callbacks
for a given state and due to this race, it returns -EBUSY leading to ETM
probe failures like below.

 coresight-etm4x: probe of 7040000.etm failed with error -16

This race can easily be triggered with async probe by setting probe type
as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property
"arm,coresight-loses-context-with-cpu".

Prevent this race by moving cpuhp callbacks to etm driver init since the
cpuhp callbacks doesn't have to depend on the etm4_count and can be once
setup during driver init. Similarly we move cpu_pm notifier registration
to driver init and completely remove etm4_count usage. Also now we can
use non cpuslocked version of cpuhp callbacks with this movement.

Fixes: 9b6a3f36 ("coresight: etmv4: Fix CPU power management setup in probe() function")
Fixes: 58eb457b ("hwtracing/coresight-etm4x: Convert to hotplug state machine")
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

v4:
split power down flow and power saving function to two patch

v5:
fix up modified change under the --- line

Add rts522a L1 sub-state support
Save more power on rts5227 rts5249 rts525a rts5260
Fix rts5260 driving parameter
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20200907100731.7722-1-ricky_wu@realtek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Initializing sensors requires attaching to pd 2. Add an ioctl for that.

This corresponds to FASTRPC_INIT_ATTACH_SENSORS in the downstream driver.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200908131013.19630-4-jonathan@marek.caSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Define SENSORS_PD for the next patch, to void using magic values for these.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200908131013.19630-3-jonathan@marek.caSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use tabs instead of spaces.

Fixes: 2419e55e ("misc: fastrpc: add mmap/unmap support")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200908131013.19630-2-jonathan@marek.caSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix and sort out rtsx driver power down flow
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20200907100718.7672-1-ricky_wu@realtek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When mfd_add_devices() fail, pcr->slots should also be freed. However,
the current implementation does not free the member, leading to a memory
leak.

Fix this by adding a new goto label that frees pcr->slots.
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Link: https://lore.kernel.org/r/20200909071853.4053-1-keitasuzuki.park@sslab.ics.keio.ac.jpSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The pointer n is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Acked-by: Todd Kjos <tkjos@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200910151221.751464-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the return value from ret is uninitialized so the function
hisi_hikey_usb_parse_kirin970 is returning a garbage value when
succeeding. Since ret is not used anywhere else in the function, remove
it and just return 0 success at the end of the function.

Fixes: d210a002 ("misc: hisi_hikey_usb: add support for Hikey 970")
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200914135646.99334-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'fpga-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next

Moritz writes:

Here is the first set of changes for the 5.10-rc1 merge window.

Xilinx:
- Luca's changes clean up the xilinx-spi driver and add better
  diagnostics on errors.

Core:
- I cleaned up a stray comment.
- Richard's change marks FPGA manager tasks un-interruptible.
- Tom has agreed to help out as Reviewer in the FPGA Manager subsystem.

DFL:
- Xu's changes  add a new bus that is the first part of a series to support
  adding devices via DFL (the other parts are still under review)

All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>

* tag 'fpga-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
  fpga: dfl: create a dfl bus type to support DFL devices
  fpga: fpga-region: Cleanup an outdated comment
  fpga: dfl: map feature mmio resources in their own feature drivers
  fpga manager: xilinx-spi: provide better diagnostics on programming failure
  fpga manager: xilinx-spi: add error checking after gpiod_get_value()
  fpga manager: xilinx-spi: fix write_complete timeout handling
  fpga manager: xilinx-spi: remove final dot from dev_err() strings
  fpga manager: xilinx-spi: remove stray comment
  fpga: dfl: change data type of feature id to u16
  MAINTAINERS: Add Tom Rix as fpga reviewer
  fpga: stratix10-soc: make FPGA task un-interruptible

We want the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "A collection of fixes I've been accruing over the last few weeks, none
  of them have been severe enough to warrant flushing the queue but it's
  been long enough now that it's a good idea to send them in.

  A handful of them are fixups for QSPI DT/bindings/compatibles, some
  smaller fixes for system DMA clock control and TMU interrupts on i.MX,
  a handful of fixes for OMAP, including a fix for DSI (display) on
  omap5"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
  arm64: dts: ns2: Fixed QSPI compatible string
  ARM: dts: BCM5301X: Fixed QSPI compatible string
  ARM: dts: NSP: Fixed QSPI compatible string
  ARM: dts: bcm: HR2: Fixed QSPI compatible string
  dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
  ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
  arm64: dts: imx8mp: correct sdma1 clk setting
  arm64: dts: imx8mq: Fix TMU interrupt property
  ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy
  ARM: dts: vfxxx: Add syscon compatible with OCOTP
  ARM: dts: imx6q-logicpd: Fix broken PWM
  arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build
  ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name
  ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells
  ARM: dts: imx7ulp: Correct gpio ranges
  ARM: dts: ls1021a: fix QuadSPI-memory reg range
  arm64: defconfig: Enable ptn5150 extcon driver
  arm64: defconfig: Enable USB gadget with configfs
  ARM: configs: Update Integrator defconfig
  ARM: dts: omap5: Fix DSI base address and clocks
  ...

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 5.9-rc5.

  Nothing huge, just a number of bugfixes and new device ids for
  problems reported:

   - new USB serial driver ids

   - bug fixes for syzbot reported problems

   - typec driver fixes

   - thunderbolt driver fixes

   - revert of reported broken commit

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes
  usb: typec: intel_pmc_mux: Do not configure Altmode HPD High
  usb: core: fix slab-out-of-bounds Read in read_descriptors
  Revert "usb: dwc3: meson-g12a: fix shared reset control use"
  usb: typec: ucsi: acpi: Check the _DEP dependencies
  usb: typec: intel_pmc_mux: Un-register the USB role switch
  usb: Fix out of sync data toggle if a configured device is reconfigured
  USB: serial: option: support dynamic Quectel USB compositions
  USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
  thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up
  thunderbolt: Disable ports that are not implemented
  USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter

Pull staging/IIO driver fixes from Greg KH:
 "Here are a number of staging and IIO driver fixes for 5.9-rc5.

  The majority of these are IIO driver fixes, to resolve a timestamp
  issue that was recently found to affect a bunch of IIO drivers.

  The other fixes in here are:

   - small IIO driver fixes

   - greybus driver fix

   - counter driver fix (came in through the IIO fixes tree)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
  iio: adc: mcp3422: fix locking on error path
  iio: adc: mcp3422: fix locking scope
  iio: adc: meson-saradc: Use the parent device to look up the calib data
  iio:adc:max1118 Fix alignment of timestamp and data leak issues
  iio:adc:ina2xx Fix timestamp alignment issue.
  iio:adc:ti-adc084s021 Fix alignment and data leak issues.
  iio:adc:ti-adc081c Fix alignment and data leak issues
  iio:magnetometer:ak8975 Fix alignment and data leak issues.
  iio:light:ltr501 Fix timestamp alignment issue.
  iio:light:max44000 Fix timestamp alignment and prevent data leak.
  iio:chemical:ccs811: Fix timestamp alignment and prevent data leak.
  iio:proximity:mb1232: Fix timestamp alignment and prevent data leak.
  iio:accel:mma7455: Fix timestamp alignment and prevent data leak.
  iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.
  iio:accel:mma8452: Fix timestamp alignment and prevent data leak.
  iio: accel: kxsd9: Fix alignment of local buffer.
  iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER
  iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set
  counter: microchip-tcb-capture: check the correct variable
  iio: cros_ec: Set Gyroscope default frequency to 25Hz
  ...

Pull driver core fixes from Greg KH:
 "Here are some small driver core and debugfs fixes for 5.9-rc5

  Included in here are:

   - firmware loader memory leak fix

   - firmware loader testing fixes for non-EFI systems

   - device link locking fixes found by lockdep

   - kobject_del() bugfix that has been affecting some callers

   - debugfs minor fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  test_firmware: Test platform fw loading on non-EFI systems
  PM: <linux/device.h>: fix @em_pd kernel-doc warning
  kobject: Drop unneeded conditional in __kobject_del()
  driver core: Fix device_pm_lock() locking for device links
  MAINTAINERS: Add the security document to SECURITY CONTACT
  driver code: print symbolic error code
  debugfs: Fix module state check condition
  kobject: Restore old behaviour of kobject_del(NULL)
  firmware_loader: fix memory leak for paged buffer

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.9, please pull the following:

- Florian fixes the Broadcom QSPI controller binding such that the most
  specific compatible string is the left most one, and all existing
  in-tree users are updated as well.

* tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  arm64: dts: ns2: Fixed QSPI compatible string
  ARM: dts: BCM5301X: Fixed QSPI compatible string
  ARM: dts: NSP: Fixed QSPI compatible string
  ARM: dts: bcm: HR2: Fixed QSPI compatible string
  dt-bindings: spi: Fix spi-bcm-qspi compatible ordering

Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.9, round 2:

- Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node.
- Correct 'ahb' clock for i.MX8MP SDMA1 in device tree.
- Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX.

* tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
  arm64: dts: imx8mp: correct sdma1 clk setting
  arm64: dts: imx8mq: Fix TMU interrupt property

Link: https://lore.kernel.org/r/20200909143844.GA25109@dragonSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.9-rc cycle

Few fixes for omap based devices:

- Fix of_clk_get() error handling for omap-iommu

- Fix missing audio pinctrl entries for logicpd boards

- Fix video for logicpd-som-lv after switch to generic panels

- Fix omap5 DSI clocks base

* tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap5: Fix DSI base address and clocks
  ARM: dts: logicpd-som-lv-baseboard: Fix missing video
  ARM: dts: logicpd-som-lv-baseboard: Fix broken audio
  ARM: dts: logicpd-torpedo-baseboard: Fix broken audio
  ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm()

Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Pull char / misc driver fixes from Greg KH:
 "Here are a number of small driver fixes for 5.9-rc5

  Included in here are:

   - habanalabs driver fixes

   - interconnect driver fixes

   - soundwire driver fixes

   - dyndbg fixes for reported issues, and then reverts to fix it all up
     to a sane state.

   - phy driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "dyndbg: accept query terms like file=bar and module=foo"
  Revert "dyndbg: fix problem parsing format="foo bar""
  scripts/tags.sh: exclude tools directory from tags generation
  video: fbdev: fix OOB read in vga_8planes_imageblit()
  dyndbg: fix problem parsing format="foo bar"
  dyndbg: refine export, rename to dynamic_debug_exec_queries()
  dyndbg: give %3u width in pr-format, cosmetic only
  interconnect: qcom: Fix small BW votes being truncated to zero
  soundwire: fix double free of dangling pointer
  interconnect: Show bandwidth for disabled paths as zero in debugfs
  habanalabs: fix report of RAZWI initiator coordinates
  habanalabs: prevent user buff overflow
  phy: omap-usb2-phy: disable PHY charger detect
  phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init
  soundwire: bus: fix typo in comment on INTSTAT registers
  phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()
  phy: qualcomm: fix platform_no_drv_owner.cocci warnings

Pull kvm fixes from Paolo Bonzini:
 "A bit on the bigger side, mostly due to me being on vacation, then
  busy, then on parental leave, but there's nothing worrisome.

  ARM:
   - Multiple stolen time fixes, with a new capability to match x86
   - Fix for hugetlbfs mappings when PUD and PMD are the same level
   - Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
     logging, for example)
   - Fix tracing output of 64bit values

  x86:
   - nSVM state restore fixes
   - Async page fault fixes
   - Lots of small fixes everywhere"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
  KVM: emulator: more strict rsm checks.
  KVM: nSVM: more strict SMM checks when returning to nested guest
  SVM: nSVM: setup nested msr permission bitmap on nested state load
  SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
  x86/kvm: don't forget to ACK async PF IRQ
  x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
  KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
  KVM: SVM: avoid emulation with stale next_rip
  KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
  KVM: SVM: Periodically schedule when unregistering regions on destroy
  KVM: MIPS: Change the definition of kvm type
  kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
  KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
  KVM: fix memory leak in kvm_io_bus_unregister_dev()
  KVM: Check the allocation of pv cpu mask
  KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
  KVM: arm64: Update page shift if stage 2 block mapping not supported
  KVM: arm64: Fix address truncation in traces
  KVM: arm64: Do not try to map PUDs when they are folded into PMD
  arm64/x86: KVM: Introduce steal-time cap
  ...

Pull OpenRISC fixes from Stafford Horne:
 "Fixes for compile issues pointed out by kbuild and one bug I found in
  initrd with the 5.9 patches"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Fix issue with get_user for 64-bit values
  openrisc: Fix cache API compile issue when not inlining
  openrisc: Reserve memblock for initrd

Pull seccomp fixes from Kees Cook:
 "This fixes a rare race condition in seccomp when using TSYNC and
  USER_NOTIF together where a memory allocation would not get freed
  (found by syzkaller, fixed by Tycho).

  Additionally updates Tycho's MAINTAINERS and .mailmap entries for his
  new address"

* tag 'seccomp-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: don't leave dangling ->notif if file allocation fails
  mailmap, MAINTAINERS: move to tycho.pizza
  seccomp: don't leak memory when filter install races

Pull libnvdimm fix from Vishal Verma:
 "Fix detection of dax support for block devices.

  Previous fixes in this area, which only affected printing of debug
  messages, had an incorrect condition for detection of dax. This fix
  should finally do the right thing"

* tag 'libnvdimm-fix-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: fix detection of dax support for non-persistent memory block devices

Pull btrfs fixes from David Sterba:
 "A few more fixes:

   - regression fix for a crash after failed snapshot creation

   - one more lockep fix: use nofs allocation when allocating missing
     device

   - fix reloc tree leak on degraded mount

   - make some extent buffer alignment checks less strict to mount
     filesystems created by btrfs-convert"

* tag 'for-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix NULL pointer dereference after failure to create snapshot
  btrfs: free data reloc tree on failed mount
  btrfs: require only sector size alignment for parent eb bytenr
  btrfs: fix lockdep splat in add_missing_dev

Pull cifs fix from Steve French:
 "A fix for lookup on DFS link when cifsacl or modefromsid is used"

* tag '5.9-rc4-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix DFS mount with cifsacl/modefromsid

Don't ignore return values in rsm_load_state_64/32 to avoid
loading invalid state from SMM state area if it was tampered with
by the guest.

This is primarly intended to avoid letting guest set bits in EFER
(like EFER.SVME when nesting is disabled) by manipulating SMM save area.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

* check that guest is 64 bit guest, otherwise the SVM related fields
  in the smm state area are not defined

* If the SMM area indicates that SMM interrupted a running guest,
  check that EFER.SVME which is also saved in this area is set, otherwise
  the guest might have tampered with SMM save area, and so indicate
  emulation failure which should triple fault the guest.

* Check that that guest CPUID supports SVM (due to the same issue as above)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This code was missing and was forcing the L2 run with L1's msr
permission bitmap
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Currently code in svm_set_nested_state copies the current vmcb control
area to L1 control area (hsave->control), under assumption that
it mostly reflects the defaults that kvm choose, and later qemu
overrides  these defaults with L2 state using standard KVM interfaces,
like KVM_SET_REGS.

However nested GIF (which is AMD specific thing) is by default is true,
and it is copied to hsave area as such.

This alone is not a big deal since on VMexit, GIF is always set to false,
regardless of what it was on VM entry.  However in nested_svm_vmexit we
were first were setting GIF to false, but then we overwrite the control
fields with value from the hsave area.  (including the nested GIF field
itself if GIF virtualization is enabled).

Now on normal vm entry this is not a problem, since GIF is usually false
prior to normal vm entry, and this is the value that copied to hsave,
and then restored, but this is not always the case when the nested state
is loaded as explained above.

To fix this issue, move svm_set_gif after we restore the L1 control
state in nested_svm_vmexit, so that even with wrong GIF in the
saved L1 control area, we still clear GIF as the spec says.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A build failure was raised by kbuild with the following error.

    drivers/android/binder.c: Assembler messages:
    drivers/android/binder.c:3861: Error: unrecognized keyword/register name `l.lwz ?ap,4(r24)'
    drivers/android/binder.c:3866: Error: unrecognized keyword/register name `l.addi ?ap,r0,0'

The issue is with 64-bit get_user() calls on openrisc.  I traced this to
a problem where in the internally in the get_user macros there is a cast
to long __gu_val this causes GCC to think the get_user call is 32-bit.
This binder code is really long and GCC allocates register r30, which
triggers the issue. The 64-bit get_user asm tries to get the 64-bit pair
register, which for r30 overflows the general register names and returns
the dummy register ?ap.

The fix here is to move the temporary variables into the asm macros.  We
use a 32-bit __gu_tmp for 32-bit and smaller macro and a 64-bit tmp in
the 64-bit macro.  The cast in the 64-bit macro has a trick of casting
through __typeof__((x)-(x)) which avoids the below warning.  This was
barrowed from riscv.

    arch/openrisc/include/asm/uaccess.h:240:8: warning: cast to pointer from integer of different size

I tested this in a small unit test to check reading between 64-bit and
32-bit pointers to 64-bit and 32-bit values in all combinations.  Also I
ran make C=1 to confirm no new sparse warnings came up.  It all looks
clean to me.

Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>

Merge commit 26d05b36 ("Merge branch 'kvm-async-pf-int' into HEAD")
tried to adapt the new interrupt based async PF mechanism to the newly
introduced IDTENTRY magic but unfortunately it missed the fact that
DEFINE_IDTENTRY_SYSVEC() doesn't call ack_APIC_irq() on its own and
all DEFINE_IDTENTRY_SYSVEC() users have to call it manually.

As the result all multi-CPU KVM guest hang on boot when
KVM_FEATURE_ASYNC_PF_INT is present. The breakage went unnoticed because no
KVM userspace (e.g. QEMU) currently set it (and thus async PF mechanism
is currently disabled) but we're about to change that.

Fixes: 26d05b36 ("Merge branch 'kvm-async-pf-int' into HEAD")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908135350.355053-3-vkuznets@redhat.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

DEFINE_IDTENTRY_SYSVEC() already contains irqentry_enter()/
irqentry_exit().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908135350.355053-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>