- 01 Apr, 2018 40 commits
-
-
Hans de Goede authored
Add 6 new ACPI HIDs to enable bluetooth on devices using these HIDs, I've tested the following HIDs / devices: BCM2E74: Jumper ezPad mini 3 BCM2E83: Acer Iconia Tab8 w1-810 BCM2E90: Meegopad T08 BCM2EAA: Chuwi Vi8 plus (CWI519) The reporter of Red Hat bugzilla 1554835 has tested: BCM2E84: Lenovo Yoga2 The reporter of kernel bugzilla 274481 has tested: BCM2E38: Toshiba Encore Note the Lenovo Yoga2 and Toshiba Encore also needs the earlier patch to treat all Interrupt ACPI resources as active low. Cc: stable@vger.kernel.org Buglink: https://bugzilla.kernel.org/attachment.cgi?id=274481 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1554835Reported-and-tested-by:
Robert R. Howell <rhowell@uwyo.edu> Reported-and-tested-by:
Christian Herzog <daduke@daduke.org> Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Hans de Goede authored
Older devices with a serdev attached bcm bt hci, use an Interrupt ACPI resource to describe the IRQ (rather then a GpioInt resource). These device seem to all claim the IRQ is active-high and seem to all need a DMI quirk to treat it as active-low. Instead simply always assume that Interrupt resource specified IRQs are always active-low. This fixes the bt device not being able to wake the host from runtime- suspend on the: Asus T100TAM, Asus T200TA, Lenovo Yoga2 and the Toshiba Encore, without the need to add 4 new DMI quirks for these models. This also allows us to remove 2 DMI quirks for the Asus T100TA and Asus T100CHI series. Likely the 2 remaining quirks can also be removed but I could not find a DSDT of these devices to verify this. Cc: stable@vger.kernel.org Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198953 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1554835Signed-off-by:
-
Hans de Goede authored
Add irq_polarity module option for easier troubleshooting of irq-polarity issues. Cc: stable@vger.kernel.org Signed-off-by:
-
Vicente Bergas authored
This WiFi/Bluetooth USB dongle uses a Realtek chipset, so, use btrtl for it. Product information: https://wikidevi.com/wiki/Edimax_EW-7611ULB From /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=7392 ProdID=a611 Rev= 2.00 S: Manufacturer=Realtek S: Product=Edimax Wi-Fi N150 Bluetooth4.0 USB Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723bu E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
-
Marcel Holtmann authored
The struct hcill_cmd to create an skb with a single u8 is pointless. So just use skb_put_u8 instead. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com>
-
Markus Elfring authored
The variable "payload" will eventually be set to an appropriate pointer a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The local variable "ret" will be set to an appropriate value a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by:
-
Marcel Holtmann authored
In case the shutdown GPIO is not wired up, it is impossible to reset the Bluetooth controller to its original state. This include the initial default baud rate which leads to issues when reloading the module or when something unexpected happens. To avoid any kind of runtime deadlocks, stick with the initial default baud rate. Signed-off-by:
-
Loic Poulain authored
Some GPIO controller drivers request sleepable context and so can't be accessed from IRQ context. Using gpiod_set/get_value accessors with such controller leads to a kernel warning since they are reserved for atomic context (according to the documentation). Use the postfixed _cansleep version instead, indicating that context is safe for sleeping if necessary. Note that this is the case here since we never toggle the gpio neither from IRQ nor from a spinlocked section. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Jaganath Kanakkassery authored
It should be __le16 instead of __u16 since its part of mgmt API. Signed-off-by:
Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by:
-
David S. Miller authored
Atul Gupta says: ==================== Chelsio Inline TLS Series for Chelsio Inline TLS driver (chtls) Use tls ULP infrastructure to register chtls as Inline TLS driver. Chtls use TCP Sockets to Tx/Rx TLS records. TCP sk_proto APIs are enhanced to offload TLS record. T6 adapter provides the following features: -TLS record offload, TLS header, encrypt, digest and transmit -TLS record receive and decrypt -TLS keys store -TCP/IP engine -TLS engine -GCM crypto engine [support CBC also] TLS provides security at the transport layer. It uses TCP to provide reliable end-to-end transport of application data. It relies on TCP for any retransmission. TLS session comprises of three parts: a. TCP/IP connection b. TLS handshake c. Record layer processing TLS handshake state machine is executed in host (refer standard implementation eg. OpenSSL). Setsockopt [SOL_TCP, TCP_ULP] initialize TCP proto-ops for Chelsio inline tls support. setsockopt(sock, SOL_TCP, TCP_ULP, "tls", sizeof("tls")); Tx and Rx Keys are decided during handshake and programmed on the chip after CCS is exchanged. struct tls12_crypto_info_aes_gcm_128 crypto_info setsockopt(sock, SOL_TLS, TLS_TX, &crypto_info, sizeof(crypto_info)) Finish is the first encrypted/decrypted message tx/rx inline. On the Tx path TLS engine receive plain text from openssl, insert IV, fetches the tx key, create cipher text records and generate MAC. TLS header is added to cipher text and forward to TCP/IP engine for transport layer processing and transmission on wire. TX PATH: Apps--openssl--chtls---TLS engine---encrypt/auth---TCP/IP engine---wire On the Rx side, data received is PDU aligned at record boundaries. TLS processes only the complete record. If rx key is programmed on CCS receive, data is decrypted and plain text is posted to host. RX PATH: Wire--cipher-text--TCP/IP engine [PDU align]---TLS engine--- decrypt/auth---plain-text--chtls--openssl--application v15: indent fix in mark_urg -removed unwanted checks in sendmsg, sendpage, recvmsg, close, disconnect,shutdown, destroy sock [Sabrina] - removed unused chtls_free_kmap [chtls.h] - rebase to top of net-next v14: -Reverse christmas tree style for variable declarations for various functions in chtls_hw.c, chtls_io.c [Stefano Brivio] - replaced break with return in tcp_state_to_flowc_state [Stefano Brivio] - renamed tlstx_seq_number to tlstx_incr_seqnum [Stefano Brivio] - use bool for corked, should_push and send_should_push [Stefano Brivio] - removed "Reviewed-by" tag for Stefano, Sabrina, Dave Watson v13: handle clean ctx free for HW_RECORD in tls_sk_proto_close -removed SOCK_INLINE [chtls.h], using csk_conn_inline instead in send_abort_rpl,chtls_send_abort_rpl,chtls_sendmsg,chtls_sendpage -removed sk_no_receive [chtls_io.c] replaced with sk_shutdown & RCV_SHUTDOWN in chtls_pt_recvmsg, peekmsg and chtls_recvmsg -cleaned chtls_expansion_size [Stefano Brivio] - u8 conf:3 in tls_sw_context to add TLS_HW_RECORD -removed is_tls_skb, using tls_skb_inline [Stefano Brivio] -reverse christmas tree formatting in chtls_io.c, chtls_cm.c [Stefano Brivio] -fixed build warning reported by kbuild robot -retained ctx conf enum in chtls_main vs earlier versions, tls_prots not used in chtls. -cleanup [removed syn_sent, base_prot, added synq] [Michael Werner] - passing struct fw_wr_hdr * to ofldtxq_stop [Casey] - rebased on top of the current net-next v12: patch against net-next -fixed build error [reported by Julia] -replace set_queue with skb_set_queue_mapping [Sabrina] -copyright year correction [chtls] v11: formatting and cleanup, few function rename and error handling [Stefano Brivio] - ctx freed later for TLS_HW_RECORD - split tx and rx in different patch v10: fixed following based on the review comments of Sabrina Dubroca -docs header added for struct tls_device [tls.h] -changed TLS_FULL_HW to TLS_HW_RECORD -similary using tls-hw-record instead of tls-inline for ethtool feature config -added more description to patch sets -replaced kmalloc/vmalloc/kfree with kvzalloc/kvfree -reordered the patch sequence -formatted entire patch for func return values v9: corrected __u8 and similar usage -create_ctx to alloc tls_context -tls_hw_prot before sk !establish check v8: tls_main.c cleanup comment [Dave Watson] v7: func name change, use sk->sk_prot where required v6: modify prot only for FULL_HW -corrected commit message for patch 11 v5: set TLS_FULL_HW for registered inline tls drivers -set TLS_FULL_HW prot for offload connection else move to TLS_SW_TX -Case handled for interface with same IP [Dave Miller] -Removed Specific IP and INADDR_ANY handling [v4] v4: removed chtls ULP type, retained tls ULP -registered chtls with net tls -defined struct tls_device to register the Inline drivers -ethtool interface tls-inline to enable Inline TLS for interface -prot update to support inline TLS v3: fixed the kbuild test issues -made few funtions static -initialized few variables v2: fixed the following based on the review comments of Stephan Mueller, Stefano Brivio and Hannes Frederic -Added more details in cover letter -Fixed indentation and formating issues -Using aes instead of aes-generic -memset key info after programing the key on chip -reordered the patch sequence ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Atul Gupta authored
Entry for Inline TLS as another driver dependent on cxgb4 and chcr Signed-off-by:
Atul Gupta <atul.gupta@chelsio.com> Signed-off-by:
-
Atul Gupta authored
Initialize the space reserved for storing the TLS keys, get and free the location where key is stored for the TLS connection. Program the Tx and Rx key as received from user in struct tls12_crypto_info_aes_gcm_128 and understood by hardware. added socket option TLS_RX Signed-off-by:
-
Atul Gupta authored
handler for record receive. plain text copied to user buffer Signed-off-by:
Michael Werner <werner@chelsio.com> Signed-off-by:
-
Atul Gupta authored
TLS handler for record transmit. Create Inline TLS work request and post to FW. Create Inline TLS record CPLs for hardware Signed-off-by:
-
Atul Gupta authored
Exchange messages with hardware to program the TLS session CPL handlers for messages received from chip. Signed-off-by:
-
Atul Gupta authored
Register chtls as Inline TLS driver, chtls is ULD to cxgb4. Setsockopt to program (tx/rx) keys on chip. Support AES GCM of key size 128. Support both Inline Rx and Tx. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Reviewed-by:
-
Atul Gupta authored
Define Inline TLS state, connection management info. Supporting macros definition. Signed-off-by:
-
Atul Gupta authored
Define macro for programming the TLS Key context Signed-off-by:
-
Atul Gupta authored
Read the Inline TLS capability from firmware. Determine the area reserved for storing the keys Dump the Inline TLS tx and rx records count. Signed-off-by:
-
Atul Gupta authored
Key area size in hw-config file. CPL struct for TLS request and response. Work request for Inline TLS. Signed-off-by:
-
Atul Gupta authored
Ethtool option enables TLS record offload on HW, user configures the feature for netdev capable of Inline TLS. This allows user to define custom sk_prot for Inline TLS sock Signed-off-by:
-
Atul Gupta authored
Facility to register Inline TLS drivers to net/tls. Setup TLS_HW_RECORD prot to listen on offload device. Cases handled - Inline TLS device exists, setup prot for TLS_HW_RECORD - Atleast one Inline TLS exists, sets TLS_HW_RECORD. - If non-inline device establish connection, move to TLS_SW_TX Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-03-31 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add raw BPF tracepoint API in order to have a BPF program type that can access kernel internal arguments of the tracepoints in their raw form similar to kprobes based BPF programs. This infrastructure also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which returns an anon-inode backed fd for the tracepoint object that allows for automatic detach of the BPF program resp. unregistering of the tracepoint probe on fd release, from Alexei. 2) Add new BPF cgroup hooks at bind() and connect() entry in order to allow BPF programs to reject, inspect or modify user space passed struct sockaddr, and as well a hook at post bind time once the port has been allocated. They are used in FB's container management engine for implementing policy, replacing fragile LD_PRELOAD wrapper intercepting bind() and connect() calls that only works in limited scenarios like glibc based apps but not for other runtimes in containerized applications, from Andrey. 3) BPF_F_INGRESS flag support has been added to sockmap programs for their redirect helper call bringing it in line with cls_bpf based programs. Support is added for both variants of sockmap programs, meaning for tx ULP hooks as well as recv skb hooks, from John. 4) Various improvements on BPF side for the nfp driver, besides others this work adds BPF map update and delete helper call support from the datapath, JITing of 32 and 64 bit XADD instructions as well as offload support of bpf_get_prandom_u32() call. Initial implementation of nfp packet cache has been tackled that optimizes memory access (see merge commit for further details), from Jakub and Jiong. 5) Removal of struct bpf_verifier_env argument from the print_bpf_insn() API has been done in order to prepare to use print_bpf_insn() soon out of perf tool directly. This makes the print_bpf_insn() API more generic and pushes the env into private data. bpftool is adjusted as well with the print_bpf_insn() argument removal, from Jiri. 6) Couple of cleanups and prep work for the upcoming BTF (BPF Type Format). The latter will reuse the current BPF verifier log as well, thus bpf_verifier_log() is further generalized, from Martin. 7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read and write support has been added in similar fashion to existing IPv6 IPV6_TCLASS socket option we already have, from Nikita. 8) Fixes in recent sockmap scatterlist API usage, which did not use sg_init_table() for initialization thus triggering a BUG_ON() in scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and uses a small helper sg_init_marker() to properly handle the affected cases, from Prashant. 9) Let the BPF core follow IDR code convention and therefore use the idr_preload() and idr_preload_end() helpers, which would also help idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory pressure, from Shaohua. 10) Last but not least, a spelling fix in an error message for the BPF cookie UID helper under BPF sample code, from Colin. ==================== Signed-off-by: -
David S. Miller authored
Eric Dumazet says: ==================== inet: frags: bring rhashtables to IP defrag IP defrag processing is one of the remaining problematic layer in linux. It uses static hash tables of 1024 buckets, and up to 128 items per bucket. A work queue is supposed to garbage collect items when host is under memory pressure, and doing a hash rebuild, changing seed used in hash computations. This work queue blocks softirqs for up to 25 ms when doing a hash rebuild, occurring every 5 seconds if host is under fire. Then there is the problem of sharing this hash table for all netns. It is time to switch to rhashtables, and allocate one of them per netns to speedup netns dismantle, since this is a critical metric these days. Lookup is now using RCU, and 64bit hosts can now provision whatever amount of memory needed to handle the expected workloads. v2: Addressed Herbert and Kirill feedbacks (Use rhashtable_free_and_destroy(), and split the big patch into small units) v3: Removed the extra add_frag_mem_limit(...) from inet_frag_create() Removed the refcount_inc_not_zero() call from inet_frags_free_cb(), as we can exploit del_timer() return value. v4: kbuild robot feedback about one missing static (squashed) Additional patches : inet: frags: do not clone skb in ip_expire() ipv6: frags: rewrite ip6_expire_frag_queue() rhashtable: reorganize struct rhashtable layout inet: frags: reorganize struct netns_frags inet: frags: get rid of ipfrag_skb_cb/FRAG_CB ipv6: frags: get rid of ip6frag_skb_cb/FRAG6_CB inet: frags: get rid of nf_ct_frag6_skb_cb/NFCT_FRAG6_CB ==================== Signed-off-by: -
Eric Dumazet authored
nf_ct_frag6_queue() uses skb->cb[] to store the fragment offset, meaning that we could use two cache lines per skb when finding the insertion point, if for some reason inet6_skb_parm size is increased in the future. By using skb->ip_defrag_offset instead of skb->cb[] we pack all the fields in a single cache line, matching what we did for IPv4. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
ip6_frag_queue uses skb->cb[] to store the fragment offset, meaning that we could use two cache lines per skb when finding the insertion point, if for some reason inet6_skb_parm size is increased in the future. By using skb->ip_defrag_offset instead of skb->cb[], we pack all the fields in a single cache line, matching what we did for IPv4. Signed-off-by:
-
Eric Dumazet authored
ip_defrag uses skb->cb[] to store the fragment offset, and unfortunately this integer is currently in a different cache line than skb->next, meaning that we use two cache lines per skb when finding the insertion point. By aliasing skb->ip_defrag_offset and skb->dev, we pack all the fields in a single cache line and save precious memory bandwidth. Note that after the fast path added by Changli Gao in commit d6bebca9 ("fragment: add fast path for in-order fragments") this change wont help the fast path, since we still need to access prev->len (2nd cache line), but will show great benefits when slow path is entered, since we perform a linear scan of a potentially long list. Also, note that this potential long list is an attack vector, we might consider also using an rb-tree there eventually. Signed-off-by:
-
Eric Dumazet authored
Put the read-mostly fields in a separate cache line at the beginning of struct netns_frags, to reduce false sharing noticed in inet_frag_kill() Signed-off-by:
-
Eric Dumazet authored
While under frags DDOS I noticed unfortunate false sharing between @nelems and @params.automatic_shrinking Move @nelems at the end of struct rhashtable so that first cache line is shared between all cpus, because almost never dirtied. Signed-off-by:
-
Eric Dumazet authored
Make it similar to IPv4 ip_expire(), and release the lock before calling icmp functions. Signed-off-by:
-
Eric Dumazet authored
An skb_clone() was added in commit ec4fbd64 ("inet: frag: release spinlock before calling icmp_send()") While fixing the bug at that time, it also added a very high cost for DDOS frags, as the ICMP rate limit is applied after this expensive operation (skb_clone() + consume_skb(), implying memory allocations, copy, and freeing) We can use skb_get(head) here, all we want is to make sure skb wont be freed by another cpu. Signed-off-by:
-
Eric Dumazet authored
Some users are willing to provision huge amounts of memory to be able to perform reassembly reasonnably well under pressure. Current memory tracking is using one atomic_t and integers. Switch to atomic_long_t so that 64bit arches can use more than 2GB, without any cost for 32bit arches. Note that this patch avoids an overflow error, if high_thresh was set to ~2GB, since this test in inet_frag_alloc() was never true : if (... || frag_mem_limit(nf) > nf->high_thresh) Tested: $ echo 16000000000 >/proc/sys/net/ipv4/ipfrag_high_thresh <frag DDOS> $ grep FRAG /proc/net/sockstat FRAG: inuse 14705885 memory 16000002880 $ nstat -n ; sleep 1 ; nstat | grep Reas IpReasmReqds 3317150 0.0 IpReasmFails 3317112 0.0 Signed-off-by:
-
Eric Dumazet authored
This function is obsolete, after rhashtable addition to inet defrag. Signed-off-by:
-
Eric Dumazet authored
This refactors ip_expire() since one indentation level is removed. Note: in the future, we should try hard to avoid the skb_clone() since this is a serious performance cost. Under DDOS, the ICMP message wont be sent because of rate limits. Fact that ip6_expire_frag_queue() does not use skb_clone() is disturbing too. Presumably IPv6 should have the same issue than the one we fixed in commit ec4fbd64 ("inet: frag: release spinlock before calling icmp_send()") Signed-off-by:
-
Eric Dumazet authored
Remove sum_frag_mem_limit(), ip_frag_mem() & ip6_frag_mem() Also since we use rhashtable we can bring back the number of fragments in "grep FRAG /proc/net/sockstat /proc/net/sockstat6" that was removed in commit 434d3054 ("inet: frag: don't account number of fragment queues") Signed-off-by:
-
Eric Dumazet authored
Some applications still rely on IP fragmentation, and to be fair linux reassembly unit is not working under any serious load. It uses static hash tables of 1024 buckets, and up to 128 items per bucket (!!!) A work queue is supposed to garbage collect items when host is under memory pressure, and doing a hash rebuild, changing seed used in hash computations. This work queue blocks softirqs for up to 25 ms when doing a hash rebuild, occurring every 5 seconds if host is under fire. Then there is the problem of sharing this hash table for all netns. It is time to switch to rhashtables, and allocate one of them per netns to speedup netns dismantle, since this is a critical metric these days. Lookup is now using RCU. A followup patch will even remove the refcount hold/release left from prior implementation and save a couple of atomic operations. Before this patch, 16 cpus (16 RX queue NIC) could not handle more than 1 Mpps frags DDOS. After the patch, I reach 9 Mpps without any tuning, and can use up to 2GB of storage for the fragments (exact number depends on frags being evicted after timeout) $ grep FRAG /proc/net/sockstat FRAG: inuse 1966916 memory 2140004608 A followup patch will change the limits for 64bit arches. Signed-off-by:
-
Eric Dumazet authored
Rehashing and destroying large hash table takes a lot of time, and happens in process context. It is safe to add cond_resched() in rhashtable_rehash_table() and rhashtable_free_and_destroy() Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
We need to call inet_frags_init() before register_pernet_subsys(), as a prereq for following patch ("inet: frags: use rhashtables for reassembly units") Signed-off-by: -
Eric Dumazet authored
We want to call lowpan_net_frag_init() earlier. Similar to commit "inet: frags: refactor ipv6_frag_init()" This is a prereq to "inet: frags: use rhashtables for reassembly units" Signed-off-by:
-
