- 03 Oct, 2014 1 commit
-
-
Dmitry Kasatkin authored
If hexlen is odd then function returns an error. Use IS_ERR to check for error, otherwise invalid pointer is used and kernel gives oops: [ 132.816522] BUG: unable to handle kernel paging request at ffffffffffffffea [ 132.819902] IP: [<ffffffff812bfc20>] asymmetric_key_id_same+0x14/0x36 [ 132.820302] PGD 1a12067 PUD 1a14067 PMD 0 [ 132.820302] Oops: 0000 [#1] SMP [ 132.820302] Modules linked in: bridge(E) stp(E) llc(E) evdev(E) serio_raw(E) i2c_piix4(E) button(E) fuse(E) [ 132.820302] CPU: 0 PID: 2993 Comm: cat Tainted: G E 3.16.0-kds+ #2847 [ 132.820302] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 132.820302] task: ffff88004249a430 ti: ffff880056640000 task.ti: ffff880056640000 [ 132.820302] RIP: 0010:[<ffffffff812bfc20>] [<ffffffff812bfc20>] asymmetric_key_id_same+0x14/0x36 [ 132.820302] RSP: 0018:ffff880056643930 EFLAGS: 00010246 [ 132.820302] RAX: 0000000000000000 RBX: ffffffffffffffea RCX: ffff880056643ae0 [ 132.820302] RDX: 000000000000005e RSI: ffffffffffffffea RDI: ffff88005bac9300 [ 132.820302] RBP: ffff880056643948 R08: 0000000000000003 R09: 00000007504aa01a [ 132.820302] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88005d68ca40 [ 132.820302] R13: 0000000000000101 R14: 0000000000000000 R15: ffff88005bac5280 [ 132.820302] FS: 00007f67a153c740(0000) GS:ffff88005da00000(0000) knlGS:0000000000000000 [ 132.820302] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 132.820302] CR2: ffffffffffffffea CR3: 000000002e663000 CR4: 00000000000006f0 [ 132.820302] Stack: [ 132.820302] ffffffff812bfc66 ffff880056643ae0 ffff88005bac5280 ffff880056643958 [ 132.820302] ffffffff812bfc9d ffff880056643980 ffffffff812971d9 ffff88005ce930c1 [ 132.820302] ffff88005ce930c0 0000000000000000 ffff8800566439c8 ffffffff812fb753 [ 132.820302] Call Trace: [ 132.820302] [<ffffffff812bfc66>] ? asymmetric_match_key_ids+0x24/0x42 [ 132.820302] [<ffffffff812bfc9d>] asymmetric_key_cmp+0x19/0x1b [ 132.820302] [<ffffffff812971d9>] keyring_search_iterator+0x74/0xd7 [ 132.820302] [<ffffffff812fb753>] assoc_array_subtree_iterate+0x67/0xd2 [ 132.820302] [<ffffffff81297165>] ? key_default_cmp+0x20/0x20 [ 132.820302] [<ffffffff812fbaa1>] assoc_array_iterate+0x19/0x1e [ 132.820302] [<ffffffff81297332>] search_nested_keyrings+0xf6/0x2b6 [ 132.820302] [<ffffffff810728da>] ? sched_clock_cpu+0x91/0xa2 [ 132.820302] [<ffffffff810860d2>] ? mark_held_locks+0x58/0x6e [ 132.820302] [<ffffffff810a137d>] ? current_kernel_time+0x77/0xb8 [ 132.820302] [<ffffffff81297871>] keyring_search_aux+0xe1/0x14c [ 132.820302] [<ffffffff812977fc>] ? keyring_search_aux+0x6c/0x14c [ 132.820302] [<ffffffff8129796b>] keyring_search+0x8f/0xb6 [ 132.820302] [<ffffffff812bfc84>] ? asymmetric_match_key_ids+0x42/0x42 [ 132.820302] [<ffffffff81297165>] ? key_default_cmp+0x20/0x20 [ 132.820302] [<ffffffff812ab9e3>] asymmetric_verify+0xa4/0x214 [ 132.820302] [<ffffffff812ab90e>] integrity_digsig_verify+0xb1/0xe2 [ 132.820302] [<ffffffff812abe41>] ? evm_verifyxattr+0x6a/0x7a [ 132.820302] [<ffffffff812b0390>] ima_appraise_measurement+0x160/0x370 [ 132.820302] [<ffffffff81161db2>] ? d_absolute_path+0x5b/0x7a [ 132.820302] [<ffffffff812ada30>] process_measurement+0x322/0x404 Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: David Howells <dhowells@redhat.com>
-
- 02 Oct, 2014 1 commit
-
-
James Morris authored
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next
-
- 30 Sep, 2014 2 commits
-
-
-
James Morris authored
-
- 22 Sep, 2014 3 commits
-
-
Richard Guy Briggs authored
Restructure to keyword=value pairs without spaces. Drop superfluous words in text. Make invalid_context a keyword. Change result= keyword to seresult=. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> [Minor rewrite to the patch subject line] Signed-off-by: Paul Moore <pmoore@redhat.com>
-
Richard Guy Briggs authored
Convert audit_log() call to WARN_ONCE(). Rename "type=" to nlmsg_type=" to avoid confusion with the audit record type. Added "protocol=" to help track down which protocol (NETLINK_AUDIT?) was used within the netlink protocol family. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> [Rewrote the patch subject line] Signed-off-by: Paul Moore <pmoore@redhat.com>
-
James Morris authored
Merge tag 'keys-next-20140922' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next
-
- 21 Sep, 2014 1 commit
-
-
David Howells authored
As it stands, the code to generate an asymmetric key ID prechecks the hex string it is given whilst determining the length, before it allocates the buffer for hex2bin() to translate into - which mean that checking the result of hex2bin() is redundant. Unfortunately, hex2bin() is marked as __must_check, which means that the following warning may be generated if the return value isn't checked: crypto/asymmetric_keys/asymmetric_type.c: In function asymmetric_key_hex_to_key_id: crypto/asymmetric_keys/asymmetric_type.c:110: warning: ignoring return value of hex2bin, declared with attribute warn_unused_result The warning can't be avoided by casting the result to void. Instead, use strlen() to check the length of the string and ignore the fact that the string might not be entirely valid hex until after the allocation has been done - in which case we can use the result of hex2bin() for this. Signed-off-by: David Howells <dhowells@redhat.com>
-
- 18 Sep, 2014 3 commits
-
-
Roberto Sassu authored
This patch fixes the detection of the 'open_writers' violation for mmaped files. before) an 'open_writers' violation is detected if the policy contains a rule with the criteria: func=FILE_CHECK mask=MAY_READ after) an 'open_writers' violation is detected if the current event matches one of the policy rules. With the old behaviour, the 'open_writers' violation is not detected in the following case: policy: measure func=FILE_MMAP mask=MAY_EXEC steps: 1) open a shared library for writing 2) execute a binary that links that shared library 3) during the binary execution, modify the shared library and save the change result: the 'open_writers' violation measurement is not present in the IMA list. Only binaries executed are protected from writes. For libraries mapped in memory there is the flag MAP_DENYWRITE for this purpose, but according to the output of 'man mmap', the mmap flag is ignored. Since ima_rdwr_violation_check() is now called by process_measurement() the information about if the inode must be measured is already provided by ima_get_action(). Thus the unnecessary function ima_must_measure() has been removed. Changes in v3 (Dmitry Kasatkin): - Violation for MMAP_CHECK function are verified since this patch - Changed patch description a bit Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Roberto Sassu authored
This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
-
- 17 Sep, 2014 4 commits
-
-
Roberto Sassu authored
This patch introduces the new variable 'ima_policy_flag', whose bits are set depending on the action of the current policy rules. Only the flags IMA_MEASURE, IMA_APPRAISE and IMA_AUDIT are set. The new variable will be used to improve performance by skipping the unnecessary execution of IMA code if the policy does not contain rules with the above actions. Changes in v6 (Roberto Sassu) * do not check 'ima_initialized' before calling ima_update_policy_flag() in ima_update_policy() (suggested by Dmitry) * calling ima_update_policy_flag() moved to init_ima to co-locate with ima_initialized (Dmitry) * add/revise comments (Mimi) Changes in v5 (Roberto Sassu) * reset IMA_APPRAISE flag in 'ima_policy_flag' if 'ima_appraise' is set to zero (reported by Dmitry) * update 'ima_policy_flag' only if IMA initialization is successful (suggested by Mimi and Dmitry) * check 'ima_policy_flag' instead of 'ima_initialized' (suggested by Mimi and Dmitry) Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Roberto Sassu authored
This patch modifies ima_add_boot_aggregate() to return an error code. This way we can determine if all the initialization procedures have been executed successfully. Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dmitry Kasatkin authored
The kernel boot parameter "ima_appraise" currently defines 'off', 'enforce' and 'fix' modes. When designing a policy and labeling the system, access to files are either blocked in the default 'enforce' mode or automatically fixed in the 'fix' mode. It is beneficial to be able to run the system in a logging only mode, without fixing it, in order to properly analyze the system. This patch adds a 'log' mode to run the system in a permissive mode and log the appraisal results. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dmitry Kasatkin authored
ima_init() is used as a single place for all initializations. Experimental keyring patches used the 'late_initcall' which was co-located with the late_initcall(init_ima). When the late_initcall for the keyring initialization was abandoned, initialization moved to init_ima, though it would be more logical to move it to ima_init, where the rest of the initialization is done. This patch moves the keyring initialization to ima_init() as a preparatory step for loading the keys which will be added to ima_init() in following patches. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
- 16 Sep, 2014 18 commits
-
-
David Howells authored
Changes for next to improve the matching of asymmetric keys and to improve the handling of PKCS#7 certificates: (1) Provide a method to preparse the data supplied for matching a key. This permits they key type to extract out the bits it needs for matching once only. Further, the type of search (direct lookup or iterative) can be set and the function used to actually check the match can be set by preparse rather than being hard coded for the type. (2) Improves asymmetric keys identification. Keys derived from X.509 certs now get labelled with IDs derived from their issuer and certificate number (required to match PKCS#7) and from their SKID and subject (required to match X.509). IDs are now binary and match criterion preparsing is provided so that criteria can be turned into binary blobs to make matching faster. (3) Improves PKCS#7 message handling to permit PKCS#7 messages without X.509 cert lists to be matched to trusted keys, thereby allowing minimally sized PKCS#7 certs to be used. (4) Improves PKCS#7 message handling to better handle certificate chains that are broken due to unsupported crypto that can otherwise by used to intersect a trust keyring. These must go on top of the PKCS#7 parser cleanup fixes. Signed-off-by: David Howells <dhowells@redhat.com>
-
David Howells authored
The X.509 certificate list in a PKCS#7 message is optional. To save space, we can omit the inclusion of any X.509 certificates if we are sure that we can look the relevant public key up by the serial number and issuer given in a signed info block. This also supports use of a signed info block for which we can't find a matching X.509 cert in the certificate list, though it be populated. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Provide better handling of unsupported crypto when verifying a PKCS#7 message. If we can't bridge the gap between a pair of X.509 certs or between a signed info block and an X.509 cert because it involves some crypto we don't support, that's not necessarily the end of the world as there may be other ways points at which we can intersect with a ring of trusted keys. Instead, only produce ENOPKG immediately if all the signed info blocks in a PKCS#7 message require unsupported crypto to bridge to the first X.509 cert. Otherwise, we defer the generation of ENOPKG until we get ENOKEY during trust validation. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Implement the first step in using binary key IDs for asymmetric keys rather than hex string keys. The previously added match data preparsing will be able to convert hex criterion strings into binary which can then be compared more rapidly. Further, we actually want more then one ID string per public key. The problem is that X.509 certs refer to other X.509 certs by matching Issuer + AuthKeyId to Subject + SubjKeyId, but PKCS#7 messages match against X.509 Issuer + SerialNumber. This patch just provides facilities for a later patch to make use of. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Make the key matching functions pointed to by key_match_data::cmp return bool rather than int. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
A previous patch added a ->match_preparse() method to the key type. This is allowed to override the function called by the iteration algorithm. Therefore, we can just set a default that simply checks for an exact match of the key description with the original criterion data and allow match_preparse to override it as needed. The key_type::match op is then redundant and can be removed, as can the user_match() function. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Remove key_type::def_lookup_type as it's no longer used. The information now defaults to KEYRING_SEARCH_LOOKUP_DIRECT but may be overridden by type->match_preparse(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Preparse the match data. This provides several advantages: (1) The preparser can reject invalid criteria up front. (2) The preparser can convert the criteria to binary data if necessary (the asymmetric key type really wants to do binary comparison of the key IDs). (3) The preparser can set the type of search to be performed. This means that it's not then a one-off setting in the key type. (4) The preparser can set an appropriate comparator function. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Provide a function to convert a buffer of binary data into an unterminated ascii hex string representation of that data. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Merge in keyrings fixes for next: (1) Insert some missing 'static' annotations. Signed-off-by: David Howells <dhowells@redhat.com>
-
David Howells authored
Merge in keyrings fixes, at least some of which later patches depend on: (1) Reinstate the production of EPERM for key types beginning with '.' in requests from userspace. (2) Tidy up the cleanup of PKCS#7 message signed information blocks and fix a bug this made more obvious. Signed-off-by: David Howells <dhowells@redhat.coM>
-
David Howells authored
Fix the parser cleanup code to drain parsed out X.509 certs in the case that the decode fails and we jump to error_decode. The function is rearranged so that the same cleanup code is used in the success case as the error case - just that the message descriptor under construction is only released if it is still pointed to by the context struct at that point. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
The code to free a signed info block is repeated several times, so move the code to do it into a function of its own. This gives us a place to add clean ups for stuff that gets added to pkcs7_signed_info. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Reinstate the generation of EPERM for a key type name beginning with a '.' in a userspace call. Types whose name begins with a '.' are internal only. The test was removed by: commit a4e3b8d7 Author: Mimi Zohar <zohar@linux.vnet.ibm.com> Date: Thu May 22 14:02:23 2014 -0400 Subject: KEYS: special dot prefixed keyring name bug fix I think we want to keep the restriction on type name so that userspace can't add keys of a special internal type. Note that removal of the test causes several of the tests in the keyutils testsuite to fail. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
David Howells authored
Add a missing static (found by checker). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
David Howells authored
Fix missing statics (found by checker). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
-
- 12 Sep, 2014 1 commit
-
-
James Morris authored
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next
-
- 10 Sep, 2014 1 commit
-
-
Paul Moore authored
While SELinux largely ignores namespaces, for good reason, there are some places where it needs to at least be aware of namespaces in order to function correctly. Network namespaces are one example. Basic awareness of network namespaces are necessary in order to match a network interface's index number to an actual network device. This patch corrects a problem with network interfaces added to a non-init namespace, and can be reproduced with the following commands: [NOTE: the NetLabel configuration is here only to active the dynamic networking controls ] # netlabelctl unlbl add default address:0.0.0.0/0 \ label:system_u:object_r:unlabeled_t:s0 # netlabelctl unlbl add default address:::/0 \ label:system_u:object_r:unlabeled_t:s0 # netlabelctl cipsov4 add pass doi:100 tags:1 # netlabelctl map add domain:lspp_test_netlabel_t \ protocol:cipsov4,100 # ip link add type veth # ip netns add myns # ip link set veth1 netns myns # ip a add dev veth0 10.250.13.100/24 # ip netns exec myns ip a add dev veth1 10.250.13.101/24 # ip l set veth0 up # ip netns exec myns ip l set veth1 up # ping -c 1 10.250.13.101 # ip netns exec myns ping -c 1 10.250.13.100 Reported-by: Jiri Jaburek <jjaburek@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
-
- 09 Sep, 2014 5 commits
-
-
Dmitry Kasatkin authored
The kernel print macros use the KBUILD_MODNAME, which is initialized to the module name. The current integrity/Makefile makes every file as its own module, so pr_xxx messages are prefixed with the file name instead of the module. Similar to the evm/Makefile and ima/Makefile, this patch fixes the integrity/Makefile to use the single name 'integrity'. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dmitry Kasatkin authored
The integrity subsystem has lots of options and takes more than half of the security menu. This patch consolidates the options under "integrity", which are hidden if not enabled. This change does not affect existing configurations. Re-configuration is not needed. Changes v4: - no need to change "integrity subsystem" to menuconfig as options are hidden, when not enabled. (Mimi) - add INTEGRITY Kconfig help description Changes v3: - dependency to INTEGRITY removed when behind 'if INTEGRITY' Changes v2: - previous patch moved integrity out of the 'security' menu. This version keeps integrity as a security option (Mimi). Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dmitry Kasatkin authored
For better visual appearance it is better to co-locate asymmetric key options together with signature support. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dmitry Kasatkin authored
IMA uses only one template. This patch initializes only required template to avoid unnecessary memory allocations. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Reviewed-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dmitry Kasatkin authored
In all cases except ima_bprm_check() the filename was not defined and ima_d_path() was used to find the full path. Unfortunately, the bprm filename is a relative pathname (eg. ./<dir>/filename). ima_bprm_check() selects between bprm->interp and bprm->filename. The following dump demonstrates the differences between using filename and interp. bprm->filename filename: ./foo.sh, pathname: /root/bin/foo.sh filename: ./foo.sh, pathname: /bin/dash bprm->interp filename: ./foo.sh, pathname: /root/bin/foo.sh filename: /bin/sh, pathname: /bin/dash In both cases the pathnames are currently the same. This patch removes usage of filename and interp in favor of d_absolute_path. Changes v3: - 11 extra bytes for "deleted" not needed (Mimi) - purpose "replace relative bprm filename with full pathname" (Mimi) Changes v2: - use d_absolute_path() instead of d_path to work in chroot environments. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-