- 17 May, 2010 2 commits
-
-
Wu Fengguang authored
Use the full chipset codename as codec name. They are more user friendly than the spec abbrs. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
This is necessary to support >=3 HDMI playback devices starting from the CougarPoint codec. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 May, 2010 3 commits
-
-
Jaroslav Kysela authored
Add back the zero return value (activate workqueue) when bdl_pos_adj is nonzero for position check. Do the position related check only for first next period using wallclk counter. Return -1 value (ignore interrupt) when period_bytes variable is zero. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Jaroslav Kysela authored
Use 24Mhz WALLCLK register to ignore too early interrupts and wrong interrupt status. The bad timing confuses the higher ALSA layer and causes audio skipping. More information about behaviour and debugging can be found in kernel bz#15912. https://bugzilla.kernel.org/show_bug.cgi?id=15912Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Shahin Ghazinouri authored
The HDA controller in US15W (Poulsbo) reports inaccurate position values for capture streams when using the LPIB read method, resulting in distorted recordings. However, using the position buffer is broken for playback streams, resulting in a fallback to the LPIB method with the current driver. This patch works around the issue by independently detecting the read position method for capture and playback streams. The patch will not have any effect if the position fix method is explicitly set. [Code simplified by tiwai] Signed-off-by: Shahin Ghazinouri <shahin.ghazinouri@pelagicore.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 May, 2010 4 commits
-
-
Takashi Iwai authored
-
Stefan Lippers-Hollmann authored
This reverts commit 7aee6746. As it doesn't seem to be universally valid for all mainboard revisions of the D945GCLF2 and breaks snd-hda-intel/ snd-hda-codec-realtek on the Intel Corporation "D945GCLF2" (LF94510J.86A.0229.2009.0729.0209) mainboard. 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: <stable@kernel.org> [2.6.33] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
This patch enables the SPDIF output pin by default. It also enables it for quirks related to Levono docking stations (x200 and 25041, identified with the same 17aa:20f2 ID). Even though not all Lenovo docking stations have SPDIF connectors, enabling the pin by default shouldn't be a problem for anyone. Other quirks remain unmodified. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Andrej Gelenberg authored
Ideapad quirks working for my ThinkPad X100e (microphone is not tested). Signed-off-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 07 May, 2010 1 commit
-
-
Wu Fengguang authored
This reverts part of commit 52dc4386, in order to fix a regression: broken SPDIF output on Intel DG45FC motherboard (IDT 92HD73E1X5 codec). --- DG45FC-IDT-codec-2.6.32 (SPDIF OK) +++ DG45FC-IDT-codec-2.6.33 (SPDIF broken) Node 0x22 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT - Pin Default 0x40f000f0: [N/A] Other at Ext N/A - Conn = Unknown, Color = Unknown - DefAssociation = 0xf, Sequence = 0x0 - Pin-ctls: 0x00: + Pin Default 0x014510a0: [Jack] SPDIF Out at Ext Rear + Conn = Optical, Color = Black + DefAssociation = 0xa, Sequence = 0x0 + Pin-ctls: 0x40: OUT Connection: 3 0x25* 0x20 0x21 Node 0x23 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT - Pin Default 0x01451140: [Jack] SPDIF Out at Ext Rear + Pin Default 0x074510b0: [Jack] SPDIF Out at Ext Rear Panel Conn = Optical, Color = Black - DefAssociation = 0x4, Sequence = 0x0 - Misc = NO_PRESENCE - Pin-ctls: 0x40: OUT + DefAssociation = 0xb, Sequence = 0x0 + Pin-ctls: 0x00: Connection: 3 0x26* 0x20 0x21 Cc: <stable@kernel.org> Cc: Alexey Fisher <bug-track@fisher-privat.net> Tested-by: David Härdeman <david@hardeman.nu> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 06 May, 2010 2 commits
-
-
Takashi Iwai authored
We had a fixed external amp setup enabled for ALC888, but this seems unnecessary. The amps are controlled rather by GPIOs. Let's remove it now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
- 05 May, 2010 5 commits
-
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/541802 The OR's hardware distorts at PCM 100% because it does not correspond to 0 dB. Fix this in patch_cxt5045() for all Packard Bell models. Reported-by: Valombre Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Anisse Astier authored
Add a quirk for all-in-one computer Dell Inspiron One 19 Touch to have proper HP and Mic support. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/549267 The OR verified that using the olpc-xo-1_5 model quirk allows the headphones to be audible when inserted into the jack. Capture was also verified to work correctly. Reported-by: Richard Gagne Tested-by: Richard Gagne Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/573284 The OR verified that using the olpc-xo-1_5 model quirk allows the headphones to be audible when inserted into the jack. Capture was also verified to work correctly. Reported-by: Andy Couldrake <acouldrake@googlemail.com> Tested-by: Andy Couldrake <acouldrake@googlemail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Brian J. Tarricone authored
This fixes a problem where cards show up as only having a single mixer element, suppressing all sound output. Signed-off-by: Brian J. Tarricone <brian@tarricone.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 23 Apr, 2010 2 commits
-
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/568600 The OR has verified that the dell-m6 model quirk is necessary for audio to be audible by default on the Dell Studio XPS 1645. This change is necessary for 2.6.32.11 and 2.6.33.2 alike. Reported-by: Andy Ross <andy@plausible.org> Tested-by: Andy Ross <andy@plausible.org> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/459083 The OR has verified with 2.6.32.11 and the latest alsa-driver stable daily snapshot that position_fix=1 is necessary for the external mic to work and for PulseAudio not to crash constantly. This patch is necessary also for 2.6.32.11 and 2.6.33.2. Reported-by: <imwithid@yahoo.com> Tested-by: <imwithid@yahoo.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 Apr, 2010 2 commits
-
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/567494 The OR has verified that the existing model quirk, ALC880_UNIWILL, is insufficient for audible playback and capture by default. Instead, the ALC880_F1734 model quirk needs to be used. This change is necessary for both 2.6.32.11 and 2.6.33.2. Reported-by: Arnaud Malpeyre <amalpeyre@gmail.com> Tested-by: Arnaud Malpeyre <amalpeyre@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/553002 The OR has verified that the dell-m6 model quirk is necessary for audio to be audible by default on the Dell Studio XPS 1645. This change is necessary for 2.6.32.11 and 2.6.33.2 alike. Reported-by: Robert Chambers Tested-by: Robert Chambers Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 Apr, 2010 1 commit
-
-
Takashi Iwai authored
When HP laptop with AD1981 codec is suspended and the docking-station is connected before the resume, the outputs get confused, and wrongly routed still to the speaker. This is because of a change in 2.6.34-rc1 ea52bf26 ALSA: hda: Add powerdown for Analog Devices HDA codecs The problem was the added resume callback that doesn't consider the modified init hook. The fix is simply remove the resume callback here and make the resume normally. This doesn't change any behavior intended in the commit above (for shutting down the sound at suspend) but only fixes the resume. Reported-and-tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 Apr, 2010 4 commits
-
-
Jens Taprogge authored
attached please find a patch that adds support for at least the T410s HDA codec. Most likely it will also add support for the T410 and T510 based models. The patch was derived from Ideapad support. Support for the laptop's and docking-station output connectors as well as the docking-station microphone connector and the laptops internal devices has been tested. Since it has been developed without a data-sheet available, support for digital outputs and the laptop's microphone input may well be incorrect. Microphone mute functionality is not included: The microphone mute button seems to be reported through thinkpad_acpi key 0000101b. The mute button LED seems to be wired to thinkpad_acpi led number 15. Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
The Biostar mobo seems to give a wrong DMA position, resulting in stuttering or skipping sounds on 2.6.34. Since the commit 7b3a177b, "ALSA: pcm_lib: fix "something must be really wrong" condition", makes the position check more strictly, the DMA position problem is revealed more clearly now. The fix is to use only LPIB for obtaining the position, i.e. passing position_fix=1. This patch adds a static quirk to achieve it as default. Reported-by: Frank Griffin <ftg@roadrunner.com> Cc: Eric Piel <Eric.Piel@tremplin-utc.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Joerg Schirottke authored
Added the matching model for Clevo laptop M570U. Signed-off-by: Joerg Schirottke <master@kanotix.com> Tested-by: Maximilian Gerhard <maxbox@directbox.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Apr, 2010 3 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
Some VIA codecs have no multiple source selection for headphone pins, thus it's useless (and wrong) to create "Independent HP" control on them. This patch adds the check of connections to skip the control in such a case. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The commit 5b0cb1d8 ALSA: hda - add more NID->Control mapping breaks the control element allocation by returning a wrong value. Let's fix it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 12 Apr, 2010 2 commits
-
-
Takashi Iwai authored
Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
A few enhancement / fixes for fix-up table of some Realtek codecs: - Apply fix-ups only for the auto model - Apply additional verbs after normal init verbs - Add a debug print to show the fix-up application This is basically a preliminary work for the next fix for Sony VAIO. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 09 Apr, 2010 4 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
The widget connections of ADC of ALC880 and ALC2260 aren't initialized, thus it might point to invalid pin. This can be a problem when mode=auto and there is only one input pin. Then user can't change the connection at all. This patch adds the code to initialize the input pin connection of these codecs. Reference: Novell bnc#594363 https://bugzilla.novell.com/show_bug.cgi?id=594363Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
Corrected HP and mic pins for ALC269vb amic and dmic models. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
ALC269vb has an alternative HP pin 0x21 in addition. Fix the parser to recognize it. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 07 Apr, 2010 4 commits
-
-
Maurus Cuelenaere authored
This adds support for the Medion WIM2160 soundcard. There's no PCI quirk added because it has the same PCI id as the Medion MD2. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Assign DACs properly to each output. Currently, the front output is bound to HP/speaker outputs blindly, but they should be assigned to individual DACs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
- 05 Apr, 2010 1 commit
-
-
Takashi Iwai authored
The commit 6a4f2ccb introduced a wrong comparision for the array range check, which effectively skips the whole initialization of DAC connections. Fixed now. Reference: bko#15689 https://bugzilla.kernel.org/show_bug.cgi?id=15689Reported-by: Adrian Ulrich <kernel@blinkenlights.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-