If boards with different NR_IRQS are compiled together, tons of
compiler warnings are emitted about redefining NR_IRQS.

This patch fixes the problem by adding up NR_IRQS in a common place.

Patch also removes quite a bit of now unnecessary code.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds support for mach-omap2 based on current
mcbsp platform driver.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds support for mach-omap1 based on current
mcbsp platform driver.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch transform mcbsp code to use platform data
from arch/arm/plat-omap/devices.c

It also gets ride of ifdefs on mcbsp.c code.
To do it, a platform data structure was defined.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch fix lots of warnings and errors reported by
scripts/checkpatch.pl on arch/arm/plat-omap/mcbsp.c.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Split sram24xx.S into sram242x.S and sram243x.S
Signed-off-by: Tony Lindgren <tony@atomide.com>

This file will get split between sram242x.S and sram243x.S
in following patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This file is omap1 specific.
Signed-off-by: Tony Lindgren <tony@atomide.com>

DMA clean-up, mostly checkpatch.pl fixes.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove __REG access in DMA code, use dma_read/write instead:

- dynamically set the omap_dma_base based on the omap type
- omap_read/write becomes dma_read/write
- dma channel registers are read with dma_ch_read/write

Cc: David Brownell <david-b@pacbell.net>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>

Make DMA channels dynamic for multi-boot
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add symbolic constants for OMAP3430 base addresses; include that file
in hardware.h.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch optimizes the timer load and start sequence.  By combining the
load and start a needless posted wait can be removed from the system timer
execution path.

* Before patch register writes are taking up .078% @ 500MHz during idle.

 Address                 |total  |min  |max      |avr     |count|ratio%
 old\process\default_idle|7.369s |0.0us|999.902ms|14.477ms|509. |62.661%
 ld\Global\cpu_v7_do_idle|4.265s |0.0us|375.786ms|24.374ms|175. |36.270%
                (UNKNOWN)|17.503ms|0.us|531.080us|5.119us|3419. |0.148%
 r\omap_dm_timer_set_load|8.135ms|0.0us|79.887us|15.065us|540.  |0.069% <--
 \vmlinux-old\Global\_end|2.023ms|0.0us|4.000us|0.560us|3613.   |0.017%
 -old\Global\__raw_readsw|1.962ms|0.0us|108.610us|9.167us|214.  |0.016%
 old\smc91x\smc_interrupt|1.353ms|0.0us|10.212us|2.348us|576.   |0.011%
 s/namei\__link_path_walk|1.161ms|0.0us|4.310us|0.762us|  1524. |0.009%
 \omap_dm_timer_write_reg|1.085ms|0.0us|126.150us|2.153us|504.  |0.009% <--

* After patch timer functions do not show up in top listings for long captures.
Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds the use of write posting for the timer.  Previously, every
write could lock the requestor for almost 3x32KHz cycles.  This patch only
synchronizes before writes and reads instead of after them and it does
it on per register basis.  Doing it this way there is some chance to hide
some of the sync latency.  It also removes some needless reads when
non-posted mode is there.  With out this fix the read/writes take almost
2% CPU load @500MHz just waiting on tick timer registers.

Also define new 34xx only registers.
Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Correcting the GPMC_PREFETCH_CONTROL register address
Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Channel should be marked active only when DMA is really started. Otherwise
just omap_request_dma, omap_dma_link_lch and omap_dma_unlink_lch will cause
incorrect dump_stack().
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: acpiphp: cleanup notify handler on all root bridges
  PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev.
  PCI: Restrict VPD read permission to root

* 'i2c-fix' of git://aeryn.fluff.org.uk/bjdooks/linux:
  I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device.
  I2C: S3C2410: Fixup error codes returned rom a transfer.
  I2C: S3C2410: Check ACK on byte transmission

* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block:
  Properly notify block layer of sync writes
  block: Fix the starving writes bug in the anticipatory IO scheduler

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] export account_system_vtime
  [IA64] Bugfix for system with 32 cpus

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (8178): uvc: Fix compilation breakage for the other drivers, if uvc is selected
  V4L/DVB (8145a): USB Video Class driver

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: fix /proc/ide/ide?/mate reporting
  Revert "BAST: Remove old IDE driver"

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5131/1: Annotate platform_secondary_init with trace_hardirqs_off
  [ARM] 5117/1: pxafb: fix __devinit/exit annotations
  [ARM] Export dma_sync_sg_for_device()
  [ARM] 5109/1: Mark rtc sa1100 driver as wakeup source before registering it
  [ARM] 5116/1: pxafb: cleanup and fix order of failure handling
  [ARM] 5115/1: pxafb: fix ifdef for command line option handling
  ARM: OMAP: Correcting the gpmc prefetch control register address
  ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq

Not sure how this came to get inverted but it appears to have been my
mess up.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix divide error when trying to configure rt_period to zero

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Fix bad hint about irqs in i2c.h
  i2c: Documentation: fix device matching description

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: fix hotplug vs rcu race

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix NODES_SHIFT Kconfig range

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] esp: tidy up target reference counting
  [SCSI] esp: Fix OOPS in esp_reset_cleanup().
  [SCSI] ses: Fix timeout

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm crypt: use cond_resched

* 'for-2.6.26' of git://neil.brown.name/md:
  Fix error paths if md_probe fails.
  Don't acknowlege that stripe-expand is complete until it really is.
  Ensure interrupted recovery completed properly (v1 metadata plus bitmap)

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc/mpc5200: Fix lite5200b suspend/resume
  powerpc/legacy_serial: Bail if reg-offset/shift properties are present
  powerpc/bootwrapper: update for initrd with simpleImage

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (55 commits)
  net: fib_rules: fix error code for unsupported families
  netdevice: Fix wrong string handle in kernel command line parsing
  net: Tyop of sk_filter() comment
  netlink: Unneeded local variable
  net-sched: fix filter destruction in atm/hfsc qdisc destruction
  net-sched: change tcf_destroy_chain() to clear start of filter list
  ipv4: fix sysctl documentation of time related values
  mac80211: don't accept WEP keys other than WEP40 and WEP104
  hostap: fix sparse warnings
  hostap: don't report useless WDS frames by default
  textsearch: fix Boyer-Moore text search bug
  netfilter: nf_conntrack_tcp: fixing to check the lower bound of valid ACK
  ipv6 route: Convert rt6_device_match() to use RT6_LOOKUP_F_xxx flags.
  netlabel: Fix a problem when dumping the default IPv6 static labels
  net/inet_lro: remove setting skb->ip_summed when not LRO-able
  inet fragments: fix race between inet_frag_find and inet_frag_secret_rebuild
  CONNECTOR: add a proc entry to list connectors
  netlink: Fix some doc comments in net/netlink/attr.c
  tcp: /proc/net/tcp rto,ato values not scaled properly (v2)
  include/linux/netdevice.h: don't export MAX_HEADER to userspace
  ...

When scheduled swaps occur, we need to blit between front & back
buffers.  If the buffers are tiled, we need to set the appropriate
XY_SRC_COPY tile bit, but only on 965 chips, since it will cause
corruption on pre-965 (e.g. 945).

Bug reported by and fix tested by Tomas Janousek <tomi@nomi.cz>.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 656acd2b ("Input: fix locking in
force-feedback core") causes the following regression on m68k:

| linux/drivers/input/ff-core.c: In function 'input_ff_upload':
| linux/drivers/input/ff-core.c:172: error: dereferencing pointer to incomplete type
| linux/drivers/input/ff-core.c: In function 'erase_effect':
| linux/drivers/input/ff-core.c:197: error: dereferencing pointer to incomplete type
| linux/drivers/input/ff-core.c:204: error: dereferencing pointer to incomplete type
| make[4]: *** [drivers/input/ff-core.o] Error 1

As the incomplete type is `struct task_struct', including <linux/sched.h> fixes
it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During the development of the physical PCI slot patch series, Gary Hade
kept on reporting strange oopses due to interactions between pci_slot
and acpiphp.

	http://lkml.org/lkml/2007/11/28/319

find_root_bridges() unconditionally installs
handle_hotplug_event_bridge() as an ACPI_SYSTEM_NOTIFY handler for all
root bridges.

However, during module cleanup, remove_bridge() will only remove the
notify handler iff the root bridge had a hot-pluggable slot directly
underneath. That is:

	root bridge -> hotplug slot

But, if the topology looks like either of the following:

	root bridge -> non-hotplug slot
	root bridge -> p2p bridge -> hotplug slot

Then we currently do not remove the notify handler from that root
bridge.

This can cause a kernel oops if we modprobe acpiphp later and it gets
loaded somewhere else in memory. If the root bridge then receives a
hotplug event, it will then attempt to call a stale, non-existent notify
handler and we blow up.

Much thanks goes to Gary Hade for his persistent debugging efforts.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
VPD end tag will hang the device.  This problem was initially
observed when a vpd entry was created in sysfs
('/sys/bus/pci/devices/<id>/vpd').   A read to this sysfs entry
will dump 32k of data.  Reading a full 32k will cause an access
beyond the VPD end tag causing the device to hang.  Once the device
is hung, the bnx2 driver will not be able to reset the device.
We believe that it is legal to read beyond the end tag and
therefore the solution is to limit the read/write length.

A majority of this patch is from Matthew Wilcox who gave code for
reworking the PCI vpd size information.  A PCI quirk added for the
Broadcom NIC's to limit the read/write's.
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

UVC makefile defines obj as:
	obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o
Instead of:
	obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o

Due to that, if uvc is selected, all obj-y or obj-m that were added to
compilation were forget. This breaks a proper kernel build.
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Add cond_resched() to prevent monopolising CPU when processing large bios.

dm-crypt processes encryption of bios in sector units.  If the bio request
is big it can spend a long time in the encryption call.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Tested-by: Yan Li <elliot.li.tech@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>