Skip to content

L
linux
Switch branch/tag
  1. 13 Dec, 2009 13 commits
  3. 11 Dec, 2009 2 commits
    • Steven Rostedt's avatar
      ring-buffer: Move resize integrity check under reader lock · dd7f5943
      Steven Rostedt authored 
      While using an application that does splice on the ftrace ring
buffer at start up, I triggered an integrity check failure.

Looking into this, I discovered that resizing the buffer performs
an integrity check after the buffer is resized. This check unfortunately
is preformed after it releases the reader lock. If a reader is
reading the buffer it may cause the integrity check to trigger a
false failure.

This patch simply moves the integrity checker under the protection
of the ring buffer reader lock.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      dd7f5943
    • Steven Rostedt's avatar
      ring-buffer: Use sync sched protection on ring buffer resizing · 18421015
      Steven Rostedt authored 
      There was a comment in the ring buffer code that says the calling
layers should prevent tracing or reading of the ring buffer while
resizing. I have discovered that the tracers do not honor this
arrangement.

This patch moves the disabling and synchronizing the ring buffer to
a higher layer during resizing. This guarantees that no writes
are occurring while the resize takes place.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      18421015
  5. 10 Dec, 2009 2 commits
  7. 09 Dec, 2009 9 commits
    • Carsten Emde's avatar
      tracing: Remove comparing of NULL to va_list in trace_array_vprintk() · f2942487
      Carsten Emde authored 
      Olof Johansson stated the following:

  Comparing a va_list with NULL is bogus. It's supposed to be treated like
  an opaque type and only be manipulated with va_* accessors.

Olof noticed that this code broke the ARM builds:

    kernel/trace/trace.c: In function 'trace_array_vprintk':
    kernel/trace/trace.c:1364: error: invalid operands to binary == (have 'va_list' and 'void *')
    kernel/trace/trace.c: In function 'tracing_mark_write':
    kernel/trace/trace.c:3349: error: incompatible type for argument 3 of 'trace_vprintk'

This patch partly reverts c13d2f7c and
re-installs the original mark_printk() mechanism.
Reported-by: default avatarOlof Johansson <olof@lixom.net>
Signed-off-by: default avatarCarsten Emde <C.Emde@osadl.org>
LKML-Reference: <4B1BAB74.104@osadl.org>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      f2942487
    • Jiri Olsa's avatar
      tracing: Fix function graph trace_pipe to properly display failed entries · be1eca39
      Jiri Olsa authored 
      There is a case where the graph tracer might get confused and omits
displaying of a single record.  This applies mostly with the trace_pipe
since it is unlikely that the trace_seq buffer will overflow with the
trace file.

As the function_graph tracer goes through the trace entries keeping a
pointer to the current record:

current ->  func1 ENTRY
            func2 ENTRY
            func2 RETURN
            func1 RETURN

When an function ENTRY is encountered, it moves the pointer to the
next entry to check if the function is a nested or leaf function.

            func1 ENTRY
current ->  func2 ENTRY
            func2 RETURN
            func1 RETURN

If the rest of the writing of the function fills the trace_seq buffer,
then the trace_pipe read will ignore this entry. The next read will
Now start at the current location, but the first entry (func1) will
be discarded.

This patch keeps a copy of the current entry in the iterator private
storage and will keep track of when the trace_seq buffer fills. When
the trace_seq buffer fills, it will reuse the copy of the entry in the
next iteration.

[
  This patch has been largely modified by Steven Rostedt in order to
  clean it up and simplify it. The original idea and concept was from
  Jirka and for that, this patch will go under his name to give him
  the credit he deserves. But because this was modify by Steven Rostedt
  anything wrong with the patch should be blamed on Steven.
]
Signed-off-by: default avatarJiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259067458-27143-1-git-send-email-jolsa@redhat.com>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      be1eca39
    • Johannes Berg's avatar
      tracing: Add full state to trace_seq · d184b31c
      Johannes Berg authored 
      The trace_seq buffer might fill up, and right now one needs to check the
return value of each printf into the buffer to check for that.

Instead, have the buffer keep track of whether it is full or not, and
reject more input if it is full or would have overflowed with an input
that wasn't added.

Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      d184b31c
    • Steven Rostedt's avatar
      tracing: Buffer the output of seq_file in case of filled buffer · a63ce5b3
      Steven Rostedt authored 
      If the seq_read fills the buffer it will call s_start again on the next
itertation with the same position. This causes a problem with the
function_graph tracer because it consumes the iteration in order to
determine leaf functions.

What happens is that the iterator stores the entry, and the function
graph plugin will look at the next entry. If that next entry is a return
of the same function and task, then the function is a leaf and the
function_graph plugin calls ring_buffer_read which moves the ring buffer
iterator forward (the trace iterator still points to the function start
entry).

The copying of the trace_seq to the seq_file buffer will fail if the
seq_file buffer is full. The seq_read will not show this entry.
The next read by userspace will cause seq_read to again call s_start
which will reuse the trace iterator entry (the function start entry).
But the function return entry was already consumed. The function graph
plugin will think that this entry is a nested function and not a leaf.

To solve this, the trace code now checks the return status of the
seq_printf (trace_print_seq). If the writing to the seq_file buffer
fails, we set a flag in the iterator (leftover) and we do not reset
the trace_seq buffer. On the next call to s_start, we check the leftover
flag, and if it is set, we just reuse the trace_seq buffer and do not
call into the plugin print functions.

Before this patch:

 2)               |      fput() {
 2)               |        __fput() {
 2)   0.550 us    |          inotify_inode_queue_event();
 2)               |          __fsnotify_parent() {
 2)   0.540 us    |          inotify_dentry_parent_queue_event();

After the patch:

 2)               |      fput() {
 2)               |        __fput() {
 2)   0.550 us    |          inotify_inode_queue_event();
 2)   0.548 us    |          __fsnotify_parent();
 2)   0.540 us    |          inotify_dentry_parent_queue_event();

[
  Updated the patch to fix a missing return 0 from the trace_print_seq()
  stub when CONFIG_TRACING is disabled.
Reported-by: default avatarIngo Molnar <mingo@elte.hu>
]
Reported-by: default avatarJiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      a63ce5b3
    • Steven Rostedt's avatar
      tracing: Only call pipe_close if pipe_close is defined · 29bf4a5e
      Steven Rostedt authored 
      This fixes a cut and paste error that had pipe_close get called
if pipe_open was defined (not pipe_close).
Reported-by: default avatarKosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20091209153204.F4CD.A69D9226@jp.fujitsu.com>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      29bf4a5e
    • Linus Torvalds's avatar
      Merge branches 'timers-for-linus-ntp' and 'irq-core-for-linus' of... · 2b876f95
      Linus Torvalds authored 
      Merge branches 'timers-for-linus-ntp' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ntp: Provide compability defines (You say MOD_NANO, I say ADJ_NANO)

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: do not execute DEBUG_SHIRQ when irq setup failed
      2b876f95
    • Linus Torvalds's avatar
      Merge branch 'timers-for-linus-urgent' of... · fbf07eac
      Linus Torvalds authored 
      Merge branch 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Fix /proc/timer_list regression
  itimers: Fix racy writes to cpu_itimer fields
  timekeeping: Fix clock_gettime vsyscall time warp
      fbf07eac
    • Linus Torvalds's avatar
      Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip · 60d8ce2c
      Linus Torvalds authored 
      * 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers, init: Limit the number of per cpu calibration bootup messages
  posix-cpu-timers: optimize and document timer_create callback
  clockevents: Add missing include to pacify sparse
  x86: vmiclock: Fix printk format
  x86: Fix printk format due to variable type change
  sparc: fix printk for change of variable type
  clocksource/events: Fix fallout of generic code changes
  nohz: Allow 32-bit machines to sleep for more than 2.15 seconds
  nohz: Track last do_timer() cpu
  nohz: Prevent clocksource wrapping during idle
  nohz: Type cast printk argument
  mips: Use generic mult/shift factor calculation for clocks
  clocksource: Provide a generic mult/shift factor calculation
  clockevents: Use u32 for mult and shift factors
  nohz: Introduce arch_needs_cpu
  nohz: Reuse ktime in sub-functions of tick_check_idle.
  time: Remove xtime_cache
  time: Implement logarithmic time accumulation
      60d8ce2c
    • Linus Torvalds's avatar
      Merge branch 'timers-for-linus-hpet' of... · 849e8dea
      Linus Torvalds authored 
      Merge branch 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: hpet: Make WARN_ON understandable
  x86: arch specific support for remapping HPET MSIs
  intr-remap: generic support for remapping HPET MSIs
  x86, hpet: Simplify the HPET code
  x86, hpet: Disable per-cpu hpet timer if ARAT is supported
      849e8dea
  9. 08 Dec, 2009 14 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7