- 14 Oct, 2020 40 commits
-
-
Linus Torvalds authored
Merge tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Improve DM core's bio splitting to use blk_max_size_offset(). Also fix bio splitting for bios that were deferred to the worker thread due to a DM device being suspended. - Remove DM core's special handling of NVMe devices now that block core has internalized efficiencies drivers previously needed to be concerned about (via now removed direct_make_request). - Fix request-based DM to not bounce through indirect dm_submit_bio; instead have block core make direct call to blk_mq_submit_bio(). - Various DM core cleanups to simplify and improve code. - Update DM cryot to not use drivers that set CRYPTO_ALG_ALLOCATES_MEMORY. - Fix DM raid's raid1 and raid10 discard limits for the purposes of linux-stable. But then remove DM raid's discard limits settings now that MD raid can efficiently handle large discards. - A couple small cleanups across various targets. * tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix request-based DM to not bounce through indirect dm_submit_bio dm: remove special-casing of bio-based immutable singleton target on NVMe dm: export dm_copy_name_and_uuid dm: fix comment in __dm_suspend() dm: fold dm_process_bio() into dm_submit_bio() dm: fix missing imposition of queue_limits from dm_wq_work() thread dm snap persistent: simplify area_io() dm thin metadata: Remove unused local variable when create thin and snap dm raid: remove unnecessary discard limits for raid10 dm raid: fix discard limits for raid1 and raid10 dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY dm: use dm_table_get_device_name() where appropriate in targets dm table: make 'struct dm_table' definition accessible to all of DM core dm: eliminate need for start_io_acct() forward declaration dm: simplify __process_abnormal_io() dm: push use of on-stack flush_bio down to __send_empty_flush() dm: optimize max_io_len() by inlining max_io_len_target_boundary() dm: push md->immutable_target optimization down to __process_bio() dm: change max_io_len() to use blk_max_size_offset() dm table: stack 'chunk_sectors' limit to account for target-specific splitting
-
git://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "Some minor bug fixes, return values, cleanups of prints, conversion of tasklets to the new API. The biggest change is retrying the initial information fetch from the management controller. If that fails, the iterface is not operational, and one group was having trouble with the management controller not being ready when the OS started up. So a retry was added" * tag 'for-linus-5.10-1' of git://github.com/cminyard/linux-ipmi: ipmi_si: Fix wrong return value in try_smi_init() ipmi: msghandler: Fix a signedness bug ipmi: add retry in try_get_dev_id() ipmi: Clean up some printks ipmi:msghandler: retry to get device id on an error ipmi:sm: Print current state when the state is invalid ipmi: Reset response handler when failing to send the command ipmi: add a newline when printing parameter 'panic_op' by sysfs char: ipmi: convert tasklets to use new tasklet_setup() API
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup updates from Tejun Heo: "Two minor changes. One makes cgroup interface files ignore zero-sized writes rather than triggering -EINVAL on them. The other change is a cleanup which doesn't cause any behavior changes" * 'for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Zero sized write should be no-op cgroup: remove redundant kernfs_activate in cgroup_setup_root()
-
Andrii Nakryiko authored
Fix data race in prepend_path() with re-reading mnt->mnt_ns twice without holding the lock. is_mounted() does check for NULL, but is_anon_ns(mnt->mnt_ns) might re-read the pointer again which could be NULL already, if in between reads one of kern_unmount()/kern_unmount_array()/umount_tree() sets mnt->mnt_ns to NULL. This is seen in production with the following stack trace: BUG: kernel NULL pointer dereference, address: 0000000000000048 ... RIP: 0010:prepend_path.isra.4+0x1ce/0x2e0 Call Trace: d_path+0xe6/0x150 proc_pid_readlink+0x8f/0x100 vfs_readlink+0xf8/0x110 do_readlinkat+0xfd/0x120 __x64_sys_readlinkat+0x1a/0x20 do_syscall_64+0x42/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: f2683bd8 ("[PATCH] fix d_absolute_path() interplay with fsmount()") Signed-off-by:Andrii Nakryiko <andrii@kernel.org> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull pidfd updates from Christian Brauner: "This introduces a new extension to the pidfd_open() syscall. Users can now raise the new PIDFD_NONBLOCK flag to support non-blocking pidfd file descriptors. This has been requested for uses in async process management libraries such as async-pidfd in Rust. Ever since the introduction of pidfds and more advanced async io various programming languages such as Rust have grown support for async event libraries. These libraries are created to help build epoll-based event loops around file descriptors. A common pattern is to automatically make all file descriptors they manage to O_NONBLOCK. For such libraries the EAGAIN error code is treated specially. When a function is called that returns EAGAIN the function isn't called again until the event loop indicates the the file descriptor is ready. Supporting EAGAIN when waiting on pidfds makes such libraries just work with little effort. This introduces a new flag PIDFD_NONBLOCK that is equivalent to O_NONBLOCK. This follows the same patterns we have for other (anon inode) file descriptors such as EFD_NONBLOCK, IN_NONBLOCK, SFD_NONBLOCK, TFD_NONBLOCK and the same for close-on-exec flags. Passing a non-blocking pidfd to waitid() currently has no effect, i.e. is not supported. There are users which would like to use waitid() on pidfds that are O_NONBLOCK and mix it with pidfds that are blocking and both pass them to waitid(). The expected behavior is to have waitid() return -EAGAIN for non-blocking pidfds and to block for blocking pidfds without needing to perform any additional checks for flags set on the pidfd before passing it to waitid(). Non-blocking pidfds will return EAGAIN from waitid() when no child process is ready yet. Returning -EAGAIN for non-blocking pidfds makes it easier for event loops that handle EAGAIN specially. It also makes the API more consistent and uniform. In essence, waitid() is treated like a read on a non-blocking pidfd or a recvmsg() on a non-blocking socket. With the addition of support for non-blocking pidfds we support the same functionality that sockets do. For sockets() recvmsg() supports MSG_DONTWAIT for pidfds waitid() supports WNOHANG. Both flags are per-call options. In contrast non-blocking pidfds and non-blocking sockets are a setting on an open file description affecting all threads in the calling process as well as other processes that hold file descriptors referring to the same open file description. Both behaviors, per call and per open file description, have genuine use-cases. The interaction with the WNOHANG flag is documented as follows: - If a non-blocking pidfd is passed and WNOHANG is not raised we simply raise the WNOHANG flag internally. When do_wait() returns indicating that there are eligible child processes but none have exited yet we set EAGAIN. If no child process exists we continue returning ECHILD. - If a non-blocking pidfd is passed and WNOHANG is raised waitid() will continue returning 0, i.e. it will not set EAGAIN. This ensure backwards compatibility with applications passing WNOHANG explicitly with pidfds" * tag 'threads-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: remove O_NONBLOCK before waiting for WSTOPPED tests: add waitid() tests for non-blocking pidfds tests: port pidfd_wait to kselftest harness pidfd: support PIDFD_NONBLOCK in pidfd_open() exit: support non-blocking pidfds -
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull kernel_clone() updates from Christian Brauner: "During the v5.9 merge window we reworked the process creation codepaths across multiple architectures. After this work we were only left with the _do_fork() helper based on the struct kernel_clone_args calling convention. As was pointed out _do_fork() isn't valid kernelese especially for a helper that isn't just static. This series removes the _do_fork() helper and introduces the new kernel_clone() helper. The process creation cleanup didn't change the name to something more reasonable mainly because _do_fork() was used in quite a few places. So sending this as a separate series seemed the better strategy. I originally intended to send this early in the v5.9 development cycle after the merge window had closed but given that this was touching quite a few places I decided to defer this until the v5.10 merge window" * tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: sched: remove _do_fork() tracing: switch to kernel_clone() kgdbts: switch to kernel_clone() kprobes: switch to kernel_clone() x86: switch to kernel_clone() sparc: switch to kernel_clone() nios2: switch to kernel_clone() m68k: switch to kernel_clone() ia64: switch to kernel_clone() h8300: switch to kernel_clone() fork: introduce kernel_clone()
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - a selftests harness fix to flush stdout before forking to avoid parent and child printing duplicates messages. This is evident when test output is redirected to a file. - a tools/ wide change to avoid comma separated statements from Joe Perches. This fix spans tools/lib, tools/power/cpupower, and selftests. * tag 'linux-kselftest-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: tools: Avoid comma separated statements selftests/harness: Flush stdout before forking
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs updates from Darrick Wong: "The biggest changes are two new features for the ondisk metadata: one to record the sizes of the inode btrees in the AG to increase redundancy checks and to improve mount times; and a second new feature to support timestamps until the year 2486. We also fixed a problem where reflinking into a file that requires synchronous writes wouldn't actually flush the updates to disk; clean up a fair amount of cruft; and started fixing some bugs in the realtime volume code. Summary: - Clean up the buffer ioend calling path so that the retry strategy isn't quite so scattered everywhere. - Clean up m_sb_bp handling. - New feature: storing inode btree counts in the AGI to speed up certain mount time per-AG block reservation operatoins and add a little more metadata redundancy. - New feature: Widen inode timestamps and quota grace expiration timestamps to support dates through the year 2486. - Get rid of more of our custom buffer allocation API wrappers. - Use a proper VLA for shortform xattr structure namevals. - Force the log after reflinking or deduping into a file that is opened with O_SYNC or O_DSYNC. - Fix some math errors in the realtime allocator" * tag 'xfs-5.10-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (42 commits) xfs: ensure that fpunch, fcollapse, and finsert operations are aligned to rt extent size xfs: make sure the rt allocator doesn't run off the end xfs: Remove unneeded semicolon xfs: force the log after remapping a synchronous-writes file xfs: Convert xfs_attr_sf macros to inline functions xfs: Use variable-size array for nameval in xfs_attr_sf_entry xfs: Remove typedef xfs_attr_shortform_t xfs: remove typedef xfs_attr_sf_entry_t xfs: Remove kmem_zalloc_large() xfs: enable big timestamps xfs: trace timestamp limits xfs: widen ondisk quota expiration timestamps to handle y2038+ xfs: widen ondisk inode timestamps to deal with y2038+ xfs: redefine xfs_ictimestamp_t xfs: redefine xfs_timestamp_t xfs: move xfs_log_dinode_to_disk to the log recovery code xfs: refactor quota timestamp coding xfs: refactor default quota grace period setting code xfs: refactor quota expiration timer modification xfs: explicitly define inode timestamp range ... -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap updates from Darrick Wong: "There's not a lot of new stuff going on here -- a little bit of code refactoring to make iomap workable with btrfs' fsync locking model, cleanups in preparation for adding THP support for filesystems, and fixing a data corruption issue for blocksize < pagesize filesystems. Summary: - Don't WARN_ON weird states that unprivileged users can create. - Don't invalidate page cache when direct writes want to fall back to buffered. - Fix some problems when readahead ios fail. - Fix a problem where inline data pages weren't getting flushed during an unshare operation. - Rework iomap to support arbitrarily many blocks per page in preparation to support THP for the page cache. - Fix a bug in the blocksize < pagesize buffered io path where we could fail to initialize the many-blocks-per-page uptodate bitmap correctly when the backing page is actually up to date. This could cause us to forget to write out dirty pages. - Split out the generic_write_sync at the end of the directio write path so that btrfs can drop the inode lock before sync'ing the file. - Call inode_dio_end before trying to sync the file after a O_DSYNC direct write (instead of afterwards) to match the behavior of the old directio code" * tag 'iomap-5.10-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Call inode_dio_end() before generic_write_sync() iomap: Allow filesystem to call iomap_dio_complete without i_rwsem iomap: Set all uptodate bits for an Uptodate page iomap: Change calling convention for zeroing iomap: Convert iomap_write_end types iomap: Convert write_count to write_bytes_pending iomap: Convert read_count to read_bytes_pending iomap: Support arbitrarily many blocks per page iomap: Use bitmap ops to set uptodate bits iomap: Use kzalloc to allocate iomap_page fs: Introduce i_blocks_per_page iomap: Fix misplaced page flushing iomap: Use round_down/round_up macros in __iomap_write_begin iomap: Mark read blocks uptodate in write_begin iomap: Clear page error before beginning a write iomap: Fix direct I/O write consistency check iomap: fix WARN_ON_ONCE() from unprivileged users -
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu updates from Joerg Roedel: - ARM-SMMU Updates from Will: - Continued SVM enablement, where page-table is shared with CPU - Groundwork to support integrated SMMU with Adreno GPU - Allow disabling of MSI-based polling on the kernel command-line - Minor driver fixes and cleanups (octal permissions, error messages, ...) - Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when a device tries DMA on memory owned by a guest. This needs new fault-types as well as a rewrite of the IOMMU memory semaphore for command completions. - Allow broken Intel IOMMUs (wrong address widths reported) to still be used for interrupt remapping. - IOMMU UAPI updates for supporting vSVA, where the IOMMU can access address spaces of processes running in a VM. - Support for the MT8167 IOMMU in the Mediatek IOMMU driver. - Device-tree updates for the Renesas driver to support r8a7742. - Several smaller fixes and cleanups all over the place. * tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits) iommu/vt-d: Gracefully handle DMAR units with no supported address widths iommu/vt-d: Check UAPI data processed by IOMMU core iommu/uapi: Handle data and argsz filled by users iommu/uapi: Rename uapi functions iommu/uapi: Use named union for user data iommu/uapi: Add argsz for user filled data docs: IOMMU user API iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate() iommu/arm-smmu-v3: Add SVA device feature iommu/arm-smmu-v3: Check for SVA features iommu/arm-smmu-v3: Seize private ASID iommu/arm-smmu-v3: Share process page tables iommu/arm-smmu-v3: Move definitions to a header iommu/io-pgtable-arm: Move some definitions to a header iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR iommu/amd: Use 4K page for completion wait write-back semaphore iommu/tegra-smmu: Allow to group clients in same swgroup iommu/tegra-smmu: Fix iova->phys translation ... -
Linus Torvalds authored
Merge branch 'stable/for-linus-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Minor enhancement of using %p to print phys_addr_r and also compiler warnings" * 'stable/for-linus-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: Mark max_segment with static keyword swiotlb: Declare swiotlb_late_init_with_default_size() in header swiotlb: Use %pa to print phys_addr_t variables
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull PNP updates from Rafael Wysocki: "These clean the PNP code somewhat: - Remove the now unused pnp_find_card() function (Christoph Hellwig) - Drop duplicate pci.h include from the quirks code and add an "internal.h" include to acpi_pnp.c to fix a compiler warning (Tian Tao)" * tag 'pnp-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PNP: remove the now unused pnp_find_card() function PNP: ACPI: Fix missing-prototypes in acpi_pnp.c PNP: quirks: Fix duplicate included pci.h -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "These rework the collection of cpufreq statistics to allow it to take place if fast frequency switching is enabled in the governor, rework the frequency invariance handling in the cpufreq core and drivers, add new hardware support to a couple of cpufreq drivers, fix a number of assorted issues and clean up the code all over. Specifics: - Rework cpufreq statistics collection to allow it to take place when fast frequency switching is enabled in the governor (Viresh Kumar). - Make the cpufreq core set the frequency scale on behalf of the driver and update several cpufreq drivers accordingly (Ionela Voinescu, Valentin Schneider). - Add new hardware support to the STI and qcom cpufreq drivers and improve them (Alain Volmat, Manivannan Sadhasivam). - Fix multiple assorted issues in cpufreq drivers (Jon Hunter, Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan Gerhold, Viresh Kumar). - Fix several assorted issues in the operating performance points (OPP) framework (Stephan Gerhold, Viresh Kumar). - Allow devfreq drivers to fetch devfreq instances by DT enumeration instead of using explicit phandles and modify the devfreq core code to support driver-specific devfreq DT bindings (Leonard Crestez, Chanwoo Choi). - Improve initial hardware resetting in the tegra30 devfreq driver and clean up the tegra cpuidle driver (Dmitry Osipenko). - Update the cpuidle core to collect state entry rejection statistics and expose them via sysfs (Lina Iyer). - Improve the ACPI _CST code handling diagnostics (Chen Yu). - Update the PSCI cpuidle driver to allow the PM domain initialization to occur in the OSI mode as well as in the PC mode (Ulf Hansson). - Rework the generic power domains (genpd) core code to allow domain power off transition to be aborted in the absence of the "power off" domain callback (Ulf Hansson). - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael Wysocki). - Fix the handling of timer_expires in the PM-runtime framework on 32-bit systems and the handling of device links in it (Grygorii Strashko, Xiang Chen). - Add IO requests batching support to the hibernate image saving and reading code and drop a bogus get_gendisk() from there (Xiaoyi Chen, Christoph Hellwig). - Allow PCIe ports to be put into the D3cold power state if they are power-manageable via ACPI (Lukas Wunner). - Add missing header file include to a power capping driver (Pujin Shi). - Clean up the qcom-cpr AVS driver a bit (Liu Shixin). - Kevin Hilman steps down as designated reviwer of adaptive voltage scaling (AVS) drivers (Kevin Hilman)" * tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) cpufreq: stats: Fix string format specifier mismatch arm: disable frequency invariance for CONFIG_BL_SWITCHER cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale() cpufreq: stats: Add memory barrier to store_reset() cpufreq: schedutil: Simplify sugov_fast_switch() ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe() ACPI: EC: PM: Flush EC work unconditionally after wakeup PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI PM: hibernate: remove the bogus call to get_gendisk() in software_resume() cpufreq: Move traces and update to policy->cur to cpufreq core cpufreq: stats: Enable stats for fast-switch as well cpufreq: stats: Mark few conditionals with unlikely() cpufreq: stats: Remove locking cpufreq: stats: Defer stats update to cpufreq_stats_record_transition() PM: domains: Allow to abort power off when no ->power_off() callback PM: domains: Rename power state enums for genpd PM / devfreq: tegra30: Improve initial hardware resetting PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function PM / devfreq: Add devfreq_get_devfreq_by_node function ... -
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Rather calm cycle for x86 platform drivers, all these have been in for-next for a couple of days with no bot complaints. Highlights: - PMC TigerLake fixes and new RocketLake support - various small fixes / updates in other drivers/tools" * tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: MAINTAINERS: update X86 PLATFORM DRIVERS entry with new kernel.org git repo platform/x86: mlx-platform: Add capability field to platform FAN description platform_data/mlxreg: Extend core platform structure platform_data/mlxreg: Update module license platform/x86: mlx-platform: Remove PSU EEPROM configuration MAINTAINERS: Update maintainers for pmc_core driver platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info() platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) support platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and reorganize platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed value platform/x86: intel_pmc_core: Fix TigerLake power gating status map platform/x86: pmc_core: Use descriptive names for LPM registers tools/power/x86/intel-speed-select: Update version for v5.10 tools/power/x86/intel-speed-select: Fix missing base-freq core IDs platform/x86: hp-wmi: add support for thermal policy
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen updates from Juergen Gross: - two small cleanup patches - avoid error messages when initializing MCA banks in a Xen dom0 - a small series for converting the Xen gntdev driver to use pin_user_pages*() instead of get_user_pages*() - intermediate fix for running as a Xen guest on Arm with KPTI enabled (the final solution will need new Xen functionality) * tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Fix typo in xen_pagetable_p2m_free() x86/xen: disable Firmware First mode for correctable memory errors xen/arm: do not setup the runstate info page if kpti is enabled xen: remove redundant initialization of variable ret xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*() xen/gntdev.c: Mark pages as dirty
-
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds authored
Pull Hyper-V updates from Wei Liu: - a series from Boqun Feng to support page size larger than 4K - a few miscellaneous clean-ups * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions x86/hyperv: Remove aliases with X64 in their name PCI: hv: Document missing hv_pci_protocol_negotiation() parameter scsi: storvsc: Support PAGE_SIZE larger than 4K Driver: hv: util: Use VMBUS_RING_SIZE() for ringbuffer sizes HID: hyperv: Use VMBUS_RING_SIZE() for ringbuffer sizes Input: hyperv-keyboard: Use VMBUS_RING_SIZE() for ringbuffer sizes hv_netvsc: Use HV_HYP_PAGE_SIZE for Hyper-V communication hv: hyperv.h: Introduce some hvpfn helper functions Drivers: hv: vmbus: Move virt_to_hvpfn() to hyperv header Drivers: hv: Use HV_HYP_PAGE in hv_synic_enable_regs() Drivers: hv: vmbus: Introduce types of GPADL Drivers: hv: vmbus: Move __vmbus_open() Drivers: hv: vmbus: Always use HV_HYP_PAGE_SIZE for gpadl drivers: hv: remove cast from hyperv_die_event
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SEV-ES support from Borislav Petkov: "SEV-ES enhances the current guest memory encryption support called SEV by also encrypting the guest register state, making the registers inaccessible to the hypervisor by en-/decrypting them on world switches. Thus, it adds additional protection to Linux guests against exfiltration, control flow and rollback attacks. With SEV-ES, the guest is in full control of what registers the hypervisor can access. This is provided by a guest-host exchange mechanism based on a new exception vector called VMM Communication Exception (#VC), a new instruction called VMGEXIT and a shared Guest-Host Communication Block which is a decrypted page shared between the guest and the hypervisor. Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest so in order for that exception mechanism to work, the early x86 init code needed to be made able to handle exceptions, which, in itself, brings a bunch of very nice cleanups and improvements to the early boot code like an early page fault handler, allowing for on-demand building of the identity mapping. With that, !KASLR configurations do not use the EFI page table anymore but switch to a kernel-controlled one. The main part of this series adds the support for that new exchange mechanism. The goal has been to keep this as much as possibly separate from the core x86 code by concentrating the machinery in two SEV-ES-specific files: arch/x86/kernel/sev-es-shared.c arch/x86/kernel/sev-es.c Other interaction with core x86 code has been kept at minimum and behind static keys to minimize the performance impact on !SEV-ES setups. Work by Joerg Roedel and Thomas Lendacky and others" * tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits) x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer x86/sev-es: Check required CPU features for SEV-ES x86/efi: Add GHCB mappings when SEV-ES is active x86/sev-es: Handle NMI State x86/sev-es: Support CPU offline/online x86/head/64: Don't call verify_cpu() on starting APs x86/smpboot: Load TSS and getcpu GDT entry before loading IDT x86/realmode: Setup AP jump table x86/realmode: Add SEV-ES specific trampoline entry point x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES x86/sev-es: Handle #DB Events x86/sev-es: Handle #AC Events x86/sev-es: Handle VMMCALL Events x86/sev-es: Handle MWAIT/MWAITX Events x86/sev-es: Handle MONITOR/MONITORX Events x86/sev-es: Handle INVD Events x86/sev-es: Handle RDPMC Events x86/sev-es: Handle RDTSC(P) Events ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool updates from Ingo Molnar: "Most of the changes are cleanups and reorganization to make the objtool code more arch-agnostic. This is in preparation for non-x86 support. Other changes: - KASAN fixes - Handle unreachable trap after call to noreturn functions better - Ignore unreachable fake jumps - Misc smaller fixes & cleanups" * tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf build: Allow nested externs to enable BUILD_BUG() usage objtool: Allow nested externs to enable BUILD_BUG() objtool: Permit __kasan_check_{read,write} under UACCESS objtool: Ignore unreachable trap after call to noreturn functions objtool: Handle calling non-function symbols in other sections objtool: Ignore unreachable fake jumps objtool: Remove useless tests before save_reg() objtool: Decode unwind hint register depending on architecture objtool: Make unwind hint definitions available to other architectures objtool: Only include valid definitions depending on source file type objtool: Rename frame.h -> objtool.h objtool: Refactor jump table code to support other architectures objtool: Make relocation in alternative handling arch dependent objtool: Abstract alternative special case handling objtool: Move macros describing structures to arch-dependent code objtool: Make sync-check consider the target architecture objtool: Group headers to check in a single list objtool: Define 'struct orc_entry' only when needed objtool: Skip ORC entry creation for non-text sections objtool: Move ORC logic out of check() ...
-
Linus Torvalds authored
Merge misc updates from Andrew Morton: "181 patches. Subsystems affected by this patch series: kbuild, scripts, ntfs, ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise, gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma, memory-failure, vmallo and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits) mm/migrate: remove obsolete comment about device public mm/migrate: remove cpages-- in migrate_vma_finalize() mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary memblock: use separate iterators for memory and reserved regions memblock: implement for_each_reserved_mem_region() using __next_mem_region() memblock: remove unused memblock_mem_size() x86/setup: simplify reserve_crashkernel() x86/setup: simplify initrd relocation and reservation arch, drivers: replace for_each_membock() with for_each_mem_range() arch, mm: replace for_each_memblock() with for_each_mem_pfn_range() memblock: reduce number of parameters in for_each_mem_range() memblock: make memblock_debug and related functionality private memblock: make for_each_memblock_type() iterator private mircoblaze: drop unneeded NUMA and sparsemem initializations riscv: drop unneeded node initialization h8300, nds32, openrisc: simplify detection of memory extents arm64: numa: simplify dummy_numa_init() arm, xtensa: simplify initialization of high memory pages dma-contiguous: simplify cma_early_percent_memory() KVM: PPC: Book3S HV: simplify kvm_cma_reserve() ...
-
Ralph Campbell authored
Device public memory never had an in tree consumer and was removed in commit 25b2995a ("mm: remove MEMORY_DEVICE_PUBLIC support"). Delete the obsolete comment. Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20200827190735.12752-2-rcampbell@nvidia.comSigned-off-by:
-
Ralph Campbell authored
The variable struct migrate_vma->cpages is only used in migrate_vma_setup(). There is no need to decrement it in migrate_vma_finalize() since it is never checked. Signed-off-by:
-
Suren Baghdasaryan authored
Currently __set_oom_adj loops through all processes in the system to keep oom_score_adj and oom_score_adj_min in sync between processes sharing their mm. This is done for any task with more that one mm_users, which includes processes with multiple threads (sharing mm and signals). However for such processes the loop is unnecessary because their signal structure is shared as well. Android updates oom_score_adj whenever a tasks changes its role (background/foreground/...) or binds to/unbinds from a service, making it more/less important. Such operation can happen frequently. We noticed that updates to oom_score_adj became more expensive and after further investigation found out that the patch mentioned in "Fixes" introduced a regression. Using Pixel 4 with a typical Android workload, write time to oom_score_adj increased from ~3.57us to ~362us. Moreover this regression linearly depends on the number of multi-threaded processes running on the system. Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj update should be synchronized between multiple processes. To prevent races between clone() and __set_oom_adj(), when oom_score_adj of the process being cloned might be modified from userspace, we use oom_adj_mutex. Its scope is changed to global. The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for the case of vfork(). To prevent performance regressions of vfork(), we skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is specified. Clearing the MMF_MULTIPROCESS flag (when the last process sharing the mm exits) is left out of this patch to keep it simple and because it is believed that this threading model is rare. Should there ever be a need for optimizing that case as well, it can be done by hooking into the exit path, likely following the mm_update_next_owner pattern. With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being quite rare, the regression is gone after the change is applied. [surenb@google.com: v3] Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com Fixes: 44a70ade ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") Reported-by:
Tim Murray <timmurray@google.com> Suggested-by:
Michal Hocko <mhocko@kernel.org> Signed-off-by:
Suren Baghdasaryan <surenb@google.com> Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Christian Kellner <christian@kellner.me> Cc: Adrian Reber <areber@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: John Johansen <john.johansen@canonical.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.comDebugged-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Mike Rapoport authored
for_each_memblock() is used to iterate over memblock.memory in a few places that use data from memblock_region rather than the memory ranges. Introduce separate for_each_mem_region() and for_each_reserved_mem_region() to improve encapsulation of memblock internals from its users. Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
Baoquan He <bhe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> [x86] Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS] Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
Iteration over memblock.reserved with for_each_reserved_mem_region() used __next_reserved_mem_region() that implemented a subset of __next_mem_region(). Use __for_each_mem_range() and, essentially, __next_mem_region() with appropriate parameters to reduce code duplication. While on it, rename for_each_reserved_mem_region() to for_each_reserved_mem_range() for consistency. Signed-off-by:
-
Mike Rapoport authored
The only user of memblock_mem_size() was x86 setup code, it is gone now and memblock_mem_size() funciton can be removed. Signed-off-by:
-
Mike Rapoport authored
* Replace magic numbers with defines * Replace memblock_find_in_range() + memblock_reserve() with memblock_phys_alloc_range() * Stop checking for low memory size in reserve_crashkernel_low(). The allocation from limited range will anyway fail if there is no enough memory, so there is no need for extra traversal of memblock.memory Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-15-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
Currently, initrd image is reserved very early during setup and then it might be relocated and re-reserved after the initial physical memory mapping is created. The "late" reservation of memblock verifies that mapped memory size exceeds the size of initrd, then checks whether the relocation required and, if yes, relocates inirtd to a new memory allocated from memblock and frees the old location. The check for memory size is excessive as memblock allocation will anyway fail if there is not enough memory. Besides, there is no point to allocate memory from memblock using memblock_find_in_range() + memblock_reserve() when there exists memblock_phys_alloc_range() with required functionality. Remove the redundant check and simplify memblock allocation. Signed-off-by:
-
Mike Rapoport authored
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.comSigned-off-by: -
Mike Rapoport authored
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start_pfn = memblock_region_memory_base_pfn(reg); end_pfn = memblock_region_memory_end_pfn(reg); /* do something with start_pfn and end_pfn */ } Rather than iterate over all memblock.memory regions and each time query for their start and end PFNs, use for_each_mem_pfn_range() iterator to get simpler and clearer code. Signed-off-by: -
Mike Rapoport authored
Currently for_each_mem_range() and for_each_mem_range_rev() iterators are the most generic way to traverse memblock regions. As such, they have 8 parameters and they are hardly convenient to users. Most users choose to utilize one of their wrappers and the only user that actually needs most of the parameters is memblock itself. To avoid yet another naming for memblock iterators, rename the existing for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new for_each_mem_range[_rev]() wrappers with only index, start and end parameters. The new wrapper nicely fits into init_unavailable_mem() and will be used in upcoming changes to simplify memblock traversals. Signed-off-by:
-
Mike Rapoport authored
The only user of memblock_dbg() outside memblock was s390 setup code and it is converted to use pr_debug() instead. This allows to stop exposing memblock_debug and memblock_dbg() to the rest of the kernel. [akpm@linux-foundation.org: make memblock_dbg() safer and neater] Signed-off-by:
-
Mike Rapoport authored
for_each_memblock_type() is not used outside mm/memblock.c, move it there from include/linux/memblock.h Signed-off-by:
-
Mike Rapoport authored
microblaze does not support neither NUMA not SPARSMEM, so there is no point to call memblock_set_node() and sparse_memory_present_with_active_regions() functions during microblaze memory initialization. Remove these calls and the surrounding code. Signed-off-by:
-
Mike Rapoport authored
RISC-V does not (yet) support NUMA and for UMA architectures node 0 is used implicitly during early memory initialization. There is no need to call memblock_set_node(), remove this call and the surrounding code. Signed-off-by:
-
Mike Rapoport authored
Instead of traversing memblock.memory regions to find memory_start and memory_end, simply query memblock_{start,end}_of_DRAM(). Signed-off-by:Stafford Horne <shorne@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-6-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
dummy_numa_init() loops over memblock.memory and passes nid=0 to numa_add_memblk() which essentially wraps memblock_set_node(). However, memblock_set_node() can cope with entire memory span itself, so the loop over memblock.memory regions is redundant. Using a single call to memblock_set_node() rather than a loop also fixes an issue with a buggy ACPI firmware in which the SRAT table covers some but not all of the memory in the EFI memory map. Jonathan Cameron says: This issue can be easily triggered by having an SRAT table which fails to cover all elements of the EFI memory map. This firmware error is detected and a warning printed. e.g. "NUMA: Warning: invalid memblk node 64 [mem 0x240000000-0x27fffffff]" At that point we fall back to dummy_numa_init(). However, the failed ACPI init has left us with our memblocks all broken up as we split them when trying to assign them to NUMA nodes. We then iterate over the memblocks and add them to node 0. numa_add_memblk() calls memblock_set_node() which merges regions that were previously split up during the earlier attempt to add them to different nodes during parsing of SRAT. This means elements are moved in the memblock array and we can end up in a different memblock after the call to numa_add_memblk(). Result is: Unable to handle kernel paging request at virtual address 0000000000003a40 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000003a40] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP ... Call trace: sparse_init_nid+0x5c/0x2b0 sparse_init+0x138/0x170 bootmem_init+0x80/0xe0 setup_arch+0x2a0/0x5fc start_kernel+0x8c/0x648 Replace the loop with a single call to memblock_set_node() to the entire memory. Signed-off-by:Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-5-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
free_highpages() in both arm and xtensa essentially open-code for_each_free_mem_range() loop to detect high memory pages that were not reserved and that should be initialized and passed to the buddy allocator. Replace open-coded implementation of for_each_free_mem_range() with usage of memblock API to simplify the code. Signed-off-by:
-
Mike Rapoport authored
The memory size calculation in cma_early_percent_memory() traverses memblock.memory rather than simply call memblock_phys_mem_size(). The comment in that function suggests that at some point there should have been call to memblock_analyze() before memblock_phys_mem_size() could be used. As of now, there is no memblock_analyze() at all and memblock_phys_mem_size() can be used as soon as cold-plug memory is registered with memblock. Replace loop over memblock.memory with a call to memblock_phys_mem_size(). Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Mike Rapoport authored
Patch series "memblock: seasonal cleaning^w cleanup", v3. These patches simplify several uses of memblock iterators and hide some of the memblock implementation details from the rest of the system. This patch (of 17): The memory size calculation in kvm_cma_reserve() traverses memblock.memory rather than simply call memblock_phys_mem_size(). The comment in that function suggests that at some point there should have been call to memblock_analyze() before memblock_phys_mem_size() could be used. As of now, there is no memblock_analyze() at all and memblock_phys_mem_size() can be used as soon as cold-plug memory is registered with memblock. Replace loop over memblock.memory with a call to memblock_phys_mem_size(). Signed-off-by:
-
