From: Martin Schwidefsky <schwidefsky@de.ibm.com>

dasd driver changes:
 - Fix check for device type in error recovery for fba devices.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Tape driver changes:
 - Add missing break in tape_34xx_work_handler to avoid misleading message.
 - Cleanup offline/remove code.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Common i/o layer changes:
 - Avoid de-registering a ccwgroup device multiple times.
 - Remove check for channel path objects in get_subchannel_by_schid.
   Channel patch objects are never in the bus list.
 - Avoid NULL pointer deref. in qdio_unmark_q.
 - Fix reference counting on subchannel objects.
 - Add shutdown function to terminate i/o and disable subchannels at reipl.
 - Remove all ccwgroup devices if the ccwgroup driver is unregistered.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 core changes:
 - Fix _raw_spin_trylock for 64 bit.
 - Add clarification to s390 debug debug documentation.

From: William Lee Irwin III <wli@holomorphy.com>

The following patch consolidates redundant code in various hugetlb
implementations.  I took the liberty of renaming a few things, since the
code was all moved anyway, and it has the benefit of helping to catch
missed conversions and/or consolidations.

From: Arjan van de Ven <arjanv@redhat.com>

patch below fixes a missing \n in a printk; without this you get to see a
<4> in the middle of that line...

From: <gerg@snapgear.com>

Add support for boards that have a 64MHz clock to common Coldfire header.

From: <gerg@snapgear.com>

Add type specifier to printk calls in 68EZ328/ucdimm setup code.  Patch
original from kernel janitors.

From: <gerg@snapgear.com>

Clean up debug trace in startup code of 68EZ328 DragonEngine board.

From: <gerg@snapgear.com>

A couple of fixes for the DragonEngine sepcific setup code:

. remove cs8900 ethernet setup from here
. add type specifier to printk calls (from kernel janitors)

From: <gerg@snapgear.com>

Some fixes for the 68360 common ints management code:

. use irqreturn_t for return type of interrupt handlers
. add type field to printk calls (from kernel janitors)
. there is no loop in show_interrupts(), don't use continue

From: <gerg@snapgear.com>

Some fixes for the 68328 common ints management code:

. use irqreturn_t for return type of interrupt handlers
. clean up asm code to be gcc-3.3.x clean
. add type field to printk calls (from kernel janitors)
. there is no loop in show_interrupts(), don't use continue

From: <gerg@snapgear.com>

A number of small fixes for the Motorola 68328 setup code:

. fix interrupt routine return types to be irqreturn_t
. add type specifier to printk calls (from kernel janitors)
. rework asm code to be gcc-3.3.x clean

From: <gerg@snapgear.com>

Fixes to the Motorola ColdFire 5407 setup code:

. fix interrupt routine return types to be irqreturn_t
. add DMA base addresses array
. support compile time setting of kernel boot arguments

From: <gerg@snapgear.com>

Add type specifier to printk calls.  Patch originally from kernel janitors.

From: <gerg@snapgear.com>

Add type specifier to printk calls.  Patch originally from kernel janitors.

From: <gerg@snapgear.com>

Add type specifier to printk calls.  Original patch from kernel janitors.

From: <gerg@snapgear.com>

Conditionaly copy an attached ROMfs filesystem in memory on kernel startup.
This should only be done if there really is a ROMfs there.

From: <gerg@snapgear.com>

Add type field to printk call.  Original patch supplied bu kernel janitors.

From: <gerg@snapgear.com>

Fixes to the Motorola ColdFire 5307 setup code:

. fix interrupt routine return types to be irqreturn_t
. add DMA base addresses array

From: <gerg@snapgear.com>

. add type field to printk calls (from kernel janitors)
. there is no loop in show_interrupts(), don't use continue

From: <gerg@snapgear.com>

Add start up code specific to the newly added COBRA5282 board.

From: <gerg@snapgear.com>

Fixes to the Motorola ColdFire 5282 setup code:

. fix interrupt routine return types to be irqreturn_t
. add DMA base addresses array

From: <gerg@snapgear.com>

Add startup code specific to newly supported COBRA5272 board.

From: <gerg@snapgear.com>

Allow for auto-detecting the size of the DRAM in the startup code for the
Motorola/5272 (ColdFire) board.  Use the DRAM sizing register, since it will
have been setup by the debug boot monitor (dBUG).

From: <gerg@snapgear.com>

Add type field to printk calls in m68knommu timers.c

From: <gerg@snapgear.com>

Define the DMA register set base address array for those m68knommu/ColdFire
CPU's that have a DMA engines.

From: <gerg@snapgear.com>

Add type field to printk calls in m68knommu mm/init.c.  Patch originally
from kernel janitors.

From: <gerg@snapgear.com>

Add type field to printk calls.  Patch original provided by kernel
janitors.

From: <gerg@snapgear.com>

Add build support for the senTec vendor to m68knommu architecture Makefile.

From: <gerg@snapgear.com>

Fix architecture/cpu defines to support those used by modern versions of
gcc (that is gcc > 3.3.x) for m68knommu.  The standard for defining
ColdFire architectures is no longer __mcf5200__, it is now __mcoldfire__.
This patch fixes all the occurances in the m68knommu/lib functions.

From: <gerg@snapgear.com>

A couple of additions to the linker script for m68knommu platforms:

. add support for COBRA5272 and COBRA5282 boards
. link in .rodata.str1 generated by gcc-3.3.x compilers

From: <gerg@snapgear.com>

Add type to all printk calls in m68knommu traps.c.  Also added a modern
dump_stack function.

From: <gerg@snapgear.com>

Cleanup m68knommu/kernel/setup.c.  Add type to all printk calls, remove
obsolete framebuffer setup and fix a few irqreturn_t for interrupt handlers
in prototypes.

Printk cleanup originally from kernel janitors.

From: <gerg@snapgear.com>

Add local m68knommu dma allocation code to build list.

From: <gerg@snapgear.com>

Create the coherent DMA allocation functions for m68knommu.  No current
hardware in this class requires anything special, so it just just does
normal allocations after sanity checks.

From: <gerg@snapgear.com>

Cleanup m68knommu's comempci.c support code.  Add type to all printk calls.
Patch originally from kernel janitors.

From: <gerg@snapgear.com>

A few changes to the m68knommu Kconfig:

. Add support for 64MHz clocked CPU's
. Add support for selecting the COBRA5272 and COBRA5282 boards
. Use drivers/Kconfig for driver configuration
. Allow configuring compilation with frame-pointer

From: <gerg@snapgear.com>

Some kernel janitor clean ups of printk for the m68knommu specific process
code.

And more importantly a fix to the kernel_thread() asm code to correctly
return the pid back to the return var from the clone system call.

From: <gerg@snapgear.com>

Create a dma-mapping.h for m68knommu architecture.