- 23 Nov, 2018 4 commits
-
-
Davide Caratti authored
commit f2cbd485 ("net/sched: act_police: fix race condition on state variables") introduces a new spinlock, but forgets its initialization. Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police' action is newly created, to avoid the following lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. <...> Call Trace: dump_stack+0x85/0xcb register_lock_class+0x581/0x590 __lock_acquire+0xd4/0x1330 ? tcf_police_init+0x2fa/0x650 [act_police] ? lock_acquire+0x9e/0x1a0 lock_acquire+0x9e/0x1a0 ? tcf_police_init+0x2fa/0x650 [act_police] ? tcf_police_init+0x55a/0x650 [act_police] _raw_spin_lock_bh+0x34/0x40 ? tcf_police_init+0x2fa/0x650 [act_police] tcf_police_init+0x2fa/0x650 [act_police] tcf_action_init_1+0x384/0x4c0 tcf_action_init+0xf6/0x160 tcf_action_add+0x73/0x170 tc_ctl_action+0x122/0x160 rtnetlink_rcv_msg+0x2a4/0x490 ? netlink_deliver_tap+0x99/0x400 ? validate_linkmsg+0x370/0x370 netlink_rcv_skb+0x4d/0x130 netlink_unicast+0x196/0x230 netlink_sendmsg+0x2e5/0x3e0 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x280/0x2f0 ? _raw_spin_unlock+0x24/0x30 ? handle_pte_fault+0xafe/0xf30 ? find_held_lock+0x2d/0x90 ? syscall_trace_enter+0x1df/0x360 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1841c7cf10 Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 RSP: 002b:00007ffcf9df4d68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f1841c7cf10 RDX: 0000000000000000 RSI: 00007ffcf9df4dc0 RDI: 0000000000000003 RBP: 000000005bf56105 R08: 0000000000000002 R09: 00007ffcf9df8edc R10: 00007ffcf9df47e0 R11: 0000000000000246 R12: 0000000000671be0 R13: 00007ffcf9df4e84 R14: 0000000000000008 R15: 0000000000000000 Fixes: f2cbd485 ("net/sched: act_police: fix race condition on state variables") Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Eric noted that with UDP GRO and NAPI timeout, we could keep a single UDP packet inside the GRO hash forever, if the related NAPI instance calls napi_gro_complete() at an higher frequency than the NAPI timeout. Willem noted that even TCP packets could be trapped there, till the next retransmission. This patch tries to address the issue, flushing the old packets - those with a NAPI_GRO_CB age before the current jiffy - before scheduling the NAPI timeout. The rationale is that such a timeout should be well below a jiffy and we are not flushing packets eligible for sane GRO. v1 -> v2: - clarified the commit message and comment RFC -> v1: - added 'Fixes tags', cleaned-up the wording. Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Fixes: 3b47d303 ("net: gro: add a per device gro flush timer") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hangbin Liu authored
When we add a new IPv6 address, we should also join corresponding solicited-node multicast address, unless the interface has IFF_NOARP flag, as function addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do not do dad and add the mcast address. So we will drop corresponding neighbour discovery message that came from other nodes. A typical example is after creating a ipvlan with mode l3, setting up an ipv6 address and changing the mode to l2. Then we will not be able to ping this address as the interface doesn't join related solicited-node mcast address. Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add corresponding mcast group and check if there is a duplicate address on the network. Reported-by:
Jianlin Shi <jishi@redhat.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Willem de Bruijn authored
tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f ("net: TX_RING and packet mmap") Reported-by:
Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by:
-
- 22 Nov, 2018 12 commits
-
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: Fix queue and buffer accounting errors This series includes two small fixes. The first resolves a typo bug in the code to clean up unused RX buffers during device queue removal. The second ensures that device queue memory is updated to reflect new supported queue ring sizes after migration to other backing hardware. ==================== Signed-off-by: -
Thomas Falcon authored
During device reset, queue memory is not being updated to accommodate changes in ring buffer sizes supported by backing hardware. Track any differences in ring buffer sizes following the reset and update queue memory when possible. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Thomas Falcon authored
The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by:
-
Lorenzo Bianconi authored
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f5 ("net: thunderx: Add basic XDP support") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Tal Gilboa authored
On every iteration of net_dim, the algorithm may choose to check for the system state by comparing current data sample with previous data sample. After each of these comparison, regardless of the action taken, the sample used as baseline is needed to be updated. This patch fixes a bug that causes DIM to take wrong decisions, due to never updating the baseline sample for comparison between iterations. This way, DIM always compares current sample with zeros. Although this is a functional fix, it also improves and stabilizes performance as the algorithm works properly now. Performance: Tested single UDP TX stream with pktgen: samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1 -m 24:8a:07:88:26:8b -f 3 -b 128 ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps. Also, toggling between profiles is less frequent with the fix. Fixes: 8115b750 ("net/dim: use struct net_dim_sample as arg to net_dim") Signed-off-by:
Tal Gilboa <talgi@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Vincent Chen authored
In the original ftmac100_interrupt(), the interrupts are only disabled when the condition "netif_running(netdev)" is true. However, this condition causes kerenl hang in the following case. When the user requests to disable the network device, kernel will clear the bit __LINK_STATE_START from the dev->state and then call the driver's ndo_stop function. Network device interrupts are not blocked during this process. If an interrupt occurs between clearing __LINK_STATE_START and stopping network device, kernel cannot disable the interrupts due to the condition "netif_running(netdev)" in the ISR. Hence, kernel will hang due to the continuous interruption of the network device. In order to solve the above problem, the interrupts of the network device should always be disabled in the ISR without being restricted by the condition "netif_running(netdev)". [V2] Remove unnecessary curly braces. Signed-off-by:
Vincent Chen <vincentc@andestech.com> Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2018-11-12 here is V4 of some net/smc fixes in different areas for the net tree. v1->v2: do not define 8-byte alignment for union smcd_cdc_cursor in patch 4/5 "net/smc: atomic SMCD cursor handling" v2->v3: stay with 8-byte alignment for union smcd_cdc_cursor in patch 4/5 "net/smc: atomic SMCD cursor handling", but get rid of __packed for struct smcd_cdc_msg v3->v4: get rid of another __packed for struct smc_cdc_msg in patch 4/5 "net/smc: atomic SMCD cursor handling" ==================== Signed-off-by: -
Ursula Braun authored
In smc_wr_tx_put_slot() field pend->idx is used after being cleared. That means always idx 0 is cleared in the wr_tx_mask. This results in a broken administration of available WR send payload buffers. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Ursula Braun authored
Running uperf tests with SMCD on LPARs results in corrupted cursors. SMCD cursors should be treated atomically to fix cursor corruption. Signed-off-by:
-
Hans Wippel authored
When a SMC-D link group is freed, a shutdown signal should be sent to the peer to indicate that the link group is invalid. This patch adds the shutdown signal to the SMC code. Signed-off-by:
Hans Wippel <hwippel@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
When searching for an existing link group the queue pair number is also to be taken into consideration. When the SMC server sends a new number in a CLC packet (keeping all other values equal) then a new link group is to be created on the SMC client side. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Hans Wippel authored
In case of a non-blocking SMC socket, the initial CLC handshake is performed over a blocking TCP connection in a worker. If the SMC socket is released, smc_release has to wait for the blocking CLC socket operations (e.g., kernel_connect) inside the worker. This patch aborts a CLC connection when the respective non-blocking SMC socket is released to avoid waiting on socket operations or timeouts. Signed-off-by:
-
- 21 Nov, 2018 3 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2018-11-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.20 First set of fixes for 4.20, this time we have quite a few them but all very small. ath9k * fix a locking regression found by a static checker wlcore * fix a crash which was a regression with wakeirq handling brcm80211 * yet another fix for 160 MHz channel handling mt76 * fix a longstaning build problem when CONFIG_LEDS_CLASS is disabled * don't use uninitialised mutex iwlwifi * do note that the iwlwifi merge tag (commit 4ec321c1) seems to contain wrong list of changes so ignore that * fix ACPI data handling, a memory leak and other smaller fixes ath10k * fix a crash during suspend which was a recent regression ==================== Signed-off-by:
-
Eric Dumazet authored
Jean-Louis reported a TCP regression and bisected to recent SACK compression. After a loss episode (receiver not able to keep up and dropping packets because its backlog is full), linux TCP stack is sending a single SACK (DUPACK). Sender waits a full RTO timer before recovering losses. While RFC 6675 says in section 5, "Algorithm Details", (2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true -- indicating at least three segments have arrived above the current cumulative acknowledgment point, which is taken to indicate loss -- go to step (4). ... (4) Invoke fast retransmit and enter loss recovery as follows: there are old TCP stacks not implementing this strategy, and still counting the dupacks before starting fast retransmit. While these stacks probably perform poorly when receivers implement LRO/GRO, we should be a little more gentle to them. This patch makes sure we do not enable SACK compression unless 3 dupacks have been sent since last rcv_nxt update. Ideally we should even rearm the timer to send one or two more DUPACK if no more packets are coming, but that will be work aiming for linux-4.21. Many thanks to Jean-Louis for bisecting the issue, providing packet captures and testing this patch. Fixes: 5d9f4262 ("tcp: add SACK compression") Reported-by:Jean-Louis Dupond <jean-louis@dupond.be> Tested-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Petr Machata authored
When a packet is trapped and the corresponding SKB marked as already-forwarded, it retains this marking even after it is forwarded across veth links into another bridge. There, since it ingresses the bridge over veth, which doesn't have offload_fwd_mark, it triggers a warning in nbp_switchdev_frame_mark(). Then nbp_switchdev_allowed_egress() decides not to allow egress from this bridge through another veth, because the SKB is already marked, and the mark (of 0) of course matches. Thus the packet is incorrectly blocked. Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That function is called from tunnels and also from veth, and thus catches the cases where traffic is forwarded between bridges and transformed in a way that invalidates the marking. Fixes: 6bc506b4 ("bridge: switchdev: Add forward mark support for stacked devices") Fixes: abf4bb6b ("skbuff: Add the offload_mr_fwd_mark field") Signed-off-by:
Petr Machata <petrm@mellanox.com> Suggested-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
-
- 20 Nov, 2018 9 commits
-
-
Davide Caratti authored
after 'police' configuration parameters were converted to use RCU instead of spinlock, the state variables used to compute the traffic rate (namely 'tcfp_toks', 'tcfp_ptoks' and 'tcfp_t_c') are erroneously read/updated in the traffic path without any protection. Use a dedicated spinlock to avoid race conditions on these variables, and ensure proper cache-line alignment. In this way, 'police' is still faster than what we observed when 'tcf_lock' was used in the traffic path _ i.e. reverting commit 2d550dba ("net/sched: act_police: don't use spinlock in the data path"). Moreover, we preserve the throughput improvement that was obtained after 'police' started using per-cpu counters, when 'avrate' is used instead of 'rate'. Changes since v1 (thanks to Eric Dumazet): - call ktime_get_ns() before acquiring the lock in the traffic path - use a dedicated spinlock instead of tcf_lock - improve cache-line usage Fixes: 2d550dba ("net/sched: act_police: don't use spinlock in the data path") Reported-and-suggested-by:
-
Heiner Kallweit authored
Meanwhile I know the driver quite well and I refactored bigger parts of it. As a result people contact me already with r8169 questions. Therefore I'd volunteer to become co-maintainer of the driver also officially. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Stephen Mallon authored
During tcp coalescing ensure that the skb hardware timestamp refers to the highest sequence number data. Previously only the software timestamp was updated during coalescing. Signed-off-by:
Stephen Mallon <stephen.mallon@sydney.edu.au> Signed-off-by:
-
Siva Reddy Kallam authored
This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change ring and flow control paths. This patch solves the RX hang while doing continuous ring or flow control parameters with heavy traffic from peer. Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-11-19 The following fixes are for mlx5 core and netdev driver. For -stable v4.16 bc7fda7d4637 ('net/mlx5e: IPoIB, Reset QP after channels are closed') For -stable v4.17 36917a270395 ('net/mlx5: IPSec, Fix the SA context hash key') For -stable v4.18 6492a432be3a ('net/mlx5e: Always use the match level enum when parsing TC rule match') c3f81be236b1 ('net/mlx5e: Removed unnecessary warnings in FEC caps query') c5ce2e736b64 ('net/mlx5e: Fix selftest for small MTUs') For -stable v4.19 effcd896b25e ('net/mlx5e: Adjust to max number of channles when re-attaching') 394cbc5acd68 ('net/mlx5e: RX, verify received packet size in Linear Striding RQ') 447cbb3613c8 ('net/mlx5e: Don't match on vlan non-existence if ethertype is wildcarded') c223c1574612 ('net/mlx5e: Claim TC hw offloads support only under a proper build config') Please pull and let me know if there's any problem. ==================== Signed-off-by: -
Juliet Kim authored
This patch changes to use rtnl_lock only during a reset to avoid deadlock that could occur when a thread operating close is holding rtnl_lock and waiting for reset_lock acquired by another thread, which is waiting for rtnl_lock in order to set the number of tx/rx queues during a reset. Also, we now setting the number of tx/rx queues during a soft reset for failover or LPM events. Signed-off-by:
Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by:
-
David S. Miller authored
Denis Bolotin says: ==================== qed: Fix Queue Manager getters This patch series fixes various queue manager getter functions. It is important to make sure the getter's caller will receive a valid queue even in error case to prevent more serious bugs. Please consider applying to net. ==================== Signed-off-by: -
Denis Bolotin authored
The getter callers doesn't know the valid Physical Queues (PQ) values. This patch makes sure that a valid PQ will always be returned. The patch consists of 3 fixes: - When qed_init_qm_get_idx_from_flags() receives a disabled flag, it returned PQ 0, which can potentially be another function's pq. Verify that flag is enabled, otherwise return default start_pq. - When qed_init_qm_get_idx_from_flags() receives an unknown flag, it returned NULL and could lead to a segmentation fault. Return default start_pq instead. - A modulo operation was added to MCOS/VFS PQ getters to make sure the PQ returned is in range of the required flag. Fixes: b5a9ee7c ("qed: Revise QM cofiguration") Signed-off-by:
Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by:
Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by:
-
Denis Bolotin authored
Fix the condition which verifies that only one flag is set. The API bitmap_weight() should receive size in bits instead of bytes. Fixes: b5a9ee7c ("qed: Revise QM cofiguration") Signed-off-by:
-
- 19 Nov, 2018 12 commits
-
-
Shay Agroskin authored
If FEC caps query fails when executing 'ethtool <interface>' the whole callback fails unnecessarily, fixed that by replacing the error return code with debug logging only. Fixes: 6cfa9460 ("net/mlx5e: Ethtool driver callback for query/set FEC policy") Signed-off-by:
Shay Agroskin <shayag@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Shay Agroskin authored
Querying interface FEC caps with 'ethtool [int]' after link reset throws warning regading link speed. This warning is not needed as there is already an indication in user space that the link is not up. Fixes: 0696d608 ("net/mlx5e: Receive buffer configuration") Signed-off-by:
-
Shay Agroskin authored
This bug would result in reading wrong FEC capabilities for 10G/40G. Fixes: 2095b264 ("net/mlx5e: Add port FEC get/set functions") Signed-off-by:
-
Shay Agroskin authored
Some speeds don't support turning FEC policy off. In case a requested FEC policy is not supported for a speed (including current speed), its new FEC policy would be: no FEC - if disabling FEC is supported for that speed unchanged - else Fixes: 2095b264 ("net/mlx5e: Add port FEC get/set functions") Signed-off-by:
-
David S. Miller authored
Arthur Kiyanovski says: ==================== net: ena: hibernation and rmmod bug fixes This patchset includes 2 bug fixes: 1. A fix to a crash during resume from hibernation. 2. A fix to an illegal memory access during driver removal (e.g. during rmmod) which might cause a crash in certain systems. The subminor number in the driver version is also promoted to indicate driver was changed. ==================== Signed-off-by: -
Arthur Kiyanovski authored
Update driver version due to critical bug fixes. Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Arthur Kiyanovski authored
In ena_remove() we have the following stack call: ena_remove() unregister_netdev() ena_destroy_device() netif_carrier_off() Calling netif_carrier_off() causes linkwatch to try to handle the link change event on the already unregistered netdev, which leads to a read from an unreadable memory address. This patch switches the order of the two functions, so that netif_carrier_off() is called on a regiestered netdev. To accomplish this fix we also had to: 1. Remove the set bit ENA_FLAG_TRIGGER_RESET 2. Add a sanitiy check in ena_close() both to prevent double device reset (when calling unregister_netdev() ena_close is called, but the device was already deleted in ena_destroy_device()). 3. Set the admin_queue running state to false to avoid using it after device was reset (for example when calling ena_destroy_all_io_queues() right after ena_com_dev_reset() in ena_down) Fixes: 944b28aa ("net: ena: fix missing lock during device destruction") Signed-off-by: -
Arthur Kiyanovski authored
During resume from hibernation if ena_restore_device fails, ena_com_dev_reset() is called, and uses the readless read mechanism, which was already destroyed by the call to ena_com_mmio_reg_read_request_destroy(). This causes a NULL pointer reference. In this commit we switch the call order of the above two functions to avoid this crash. Fixes: d7703ddb ("net: ena: fix rare bug when failed restart/resume is followed by driver removal") Signed-off-by:
-
Xin Long authored
Different from processing the addstrm_out request, The receiver handles an addstrm_in request by sending back an addstrm_out request to the sender who will increase its stream's in and incnt later. Now stream->incnt has been increased since it sent out the addstrm_in request in sctp_send_add_streams(), with the wrong stream->incnt will even cause crash when copying stream info from the old stream's in to the new one's in sctp_process_strreset_addstrm_out(). This patch is to fix it by simply removing the stream->incnt change from sctp_send_add_streams(). Fixes: 242bd2d5 ("sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter") Reported-by:
Jianwen Ji <jiji@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Valentine Fatiev authored
Loopback test had fixed packet size, which can be bigger than configured MTU. Shorten the loopback packet size to be bigger than minimal MTU allowed by the device. Text field removed from struct 'mlx5ehdr' as redundant to allow send small packets as minimal allowed MTU. Fixes: d605d668 ("net/mlx5e: Add support for ethtool self diagnostics test") Signed-off-by:
Valentine Fatiev <valentinef@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
In case of striding RQ, we use MPWRQ (Multi Packet WQE RQ), which means that WQE (RX descriptor) can be used for many packets and so the WQE is much bigger than MTU. In virtualization setups where the port mtu can be larger than the vf mtu, if received packet is bigger than MTU, it won't be dropped by HW on too small receive WQE. If we use linear SKB in striding RQ, since each stride has room for mtu size payload and skb info, an oversized packet can lead to crash for crossing allocated page boundary upon the call to build_skb. So driver needs to check packet size and drop it. Introduce new SW rx counter, rx_oversize_pkts_sw_drop, which counts the number of packets dropped by the driver for being too large. As a new field is added to the RQ struct, re-open the channels whenever this field is being used in datapath (i.e., in the case of linear Striding RQ). Fixes: 619a8f2a ("net/mlx5e: Use linear SKB in Striding RQ") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Reviewed-by:
-
Roi Dayan authored
The mirror and not the output count is the one denoting a split. Fix to condition the offload attempt on the mirror count being > 0 along the firmware to have the related capability. Fixes: 592d3651 ("net/mlx5e: Parse mirroring action for offloaded TC eswitch flows") Signed-off-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Yossi Kuperman <yossiku@mellanox.com> Reviewed-by:
Chris Mi <chrism@mellanox.com> Acked-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
-
