- 22 Jan, 2014 21 commits
-
-
Hauke Mehrtens authored
The defconfig for bcm47xx contained lots of driver which are not special for these SoCs and missed on the other side some some drivers for parts essential for these SoC and only found on here. The flash, usb and some Ethernet driver were missing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5930/
-
Hauke Mehrtens authored
The BCM47xx SoCs have a 8250 serial compatible console at address 0x18000300 and an other at 0x18000400. On most devices 0x18000300 is wired to some pins on the board, we should use that. This is the smae for the AI (bcma) and the SB (ssb) bus, this is some offset on the chip common core. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5889/
-
Hauke Mehrtens authored
bcm47xx only uses the CFE code for early print to a console, but that is also possible with a early print serial 8250 driver. The CFE api init causes hangs somewhere in prom_init_cfe() on some devices like the Buffalo WHR-HP-G54 and the Asus WL-520GU. This was reported in https://dev.openwrt.org/ticket/4061 and https://forum.openwrt.org/viewtopic.php?id=17063 This will remove all the CFE handling code from bcm47xx. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5888/
-
Hauke Mehrtens authored
Recently the output of "system type" in /proc/cpuinfo was changed to Broadcom BCM4730 (Some sample board), but it is better to just print the SoC name in the "system type" entry. The board name will be added in the machine entry later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5865/
-
Jonas Gorski authored
All MIPS cores on BCM63XX identify as Broadcom, not MIPS, so no need to support non-broadcom MIPS CPUs. This also ensures that CPU_BMIPS is always selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6246/
-
Jonas Gorski authored
BMIPS32 and BMIPS3300 also need to be available for MIPS32R1, as bcm47xx might not select BMIPS. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6245/
-
Jonas Gorski authored
Let BCM47XX_SSB select the appropriate BMIPS CPUs enountered on those systems. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6244/
-
Jonas Gorski authored
Let each supported chip select the appropirate SYS_HAS_CPU_BMIPS* option for its embedded processor, so support will be conditionally included. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6250/
-
Jonas Gorski authored
Use the return value for guarding further SMP setup. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6249/
-
Jonas Gorski authored
Add a helper similar to the generic register_XXX_smp_ops() for bmips. Register SMP UP ops in case of BMIPS32/3300. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6248/
-
Jonas Gorski authored
Codewise there is no difference between these two, so it does not make sense to treat them differently. Also chip families having one of these tend to have the other. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6247/
-
Jonas Gorski authored
As they are MIPS32 CPUs they do support the prefetch opcode. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6243/
-
Jonas Gorski authored
All BMIPS CPUs support HIGHMEM, so it should be selected by CPU_BMIPS. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6242/
-
Jonas Gorski authored
Instead of treating each flavour as an exclusive CPU to select, make BMIPS the only option and let SYS_HAS_CPU_BMIPS* decide for which flavours to include support. Run tested on BMIPS3300 and BMIPS4350, only build tested for BMIPS4380 and BMIPS5000. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6240/
-
Jonas Gorski authored
Allow building for all bmips cpus at the same time by changing ifdefs to checks for the cpu type, or adding appropriate checks to the assembly. Since BMIPS43XX and BMIPS5000 require different IPI implementations, split the SMP ops into one for each, so the runtime overhead is only at registration time for them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6241/
-
Jonas Gorski authored
Add guards around the enum to allow including cpu.h from assembly. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6238/
-
Jonas Gorski authored
BCM3368 has the same shared TLB as BCM6358. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6239/
-
Jonas Gorski authored
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6180/
-
Jonas Gorski authored
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6179/
-
Jonas Gorski authored
Properly set up the HSSPI clock rate depending on the SoC's PLL rate. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6177/
-
Jonas Gorski authored
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6178/
-
- 13 Jan, 2014 4 commits
-
-
Paul Burton authored
CPUs implementing MIPS32 R2 may include a 64-bit FPU, just as MIPS64 CPUs do. In order to preserve backwards compatibility a 64-bit FPU will act like a 32-bit FPU (by accessing doubles from the least significant 32 bits of an even-odd pair of FP registers) when the Status.FR bit is zero, again just like a mips64 CPU. The standard O32 ABI is defined expecting a 32-bit FPU, however recent toolchains support use of a 64-bit FPU from an O32 MIPS32 executable. When an ELF executable is built to use a 64-bit FPU a new flag (EF_MIPS_FP64) is set in the ELF header. With this patch the kernel will check the EF_MIPS_FP64 flag when executing an O32 binary, and set Status.FR accordingly. The addition of O32 64-bit FP support lessens the opportunity for optimisation in the FPU emulator, so a CONFIG_MIPS_O32_FP64_SUPPORT Kconfig option is introduced to allow this support to be disabled for those that don't require it. Inspired by an earlier patch by Leonid Yegoshin, but implemented more cleanly & correctly. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6154/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
These macros are not used anywhere in the kernel. Remove them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6111/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Steven J. Hill authored
This patch adds support for microMIPS encodings of the mfhc1 & mthc1 instructions introduced in release 2 of the mips32 & mips64 architectures, converting them to their mips32 equivalents for the FPU emulator. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6110/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Leonid Yegoshin authored
This patch adds support for the mfhc1 & mthc1 instructions to the FPU emulator. These instructions were introduced in release 2 of the MIPS32 & MIPS64 architectures and allow access to the most significant 32 bits of a 64-bit FP register. [ralf@linux-mips.org: Fix ifdef hell added by original patch.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6112/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
- 12 Jan, 2014 4 commits
-
-
Linus Torvalds authored
-
Steven Rostedt authored
While running stress tests on adding and deleting ftrace instances I hit this bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_inode_permission+0x85/0x160 PGD 63681067 PUD 7ddbe067 PMD 0 Oops: 0000 [#1] PREEMPT CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000 RIP: 0010:[<ffffffff812d8bc5>] [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160 RSP: 0018:ffff88007ddb1c48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840 RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000 RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54 R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000 R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000 FS: 00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0 Call Trace: security_inode_permission+0x1c/0x30 __inode_permission+0x41/0xa0 inode_permission+0x18/0x50 link_path_walk+0x66/0x920 path_openat+0xa6/0x6c0 do_filp_open+0x43/0xa0 do_sys_open+0x146/0x240 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff RIP selinux_inode_permission+0x85/0x160 CR2: 0000000000000020 Investigating, I found that the inode->i_security was NULL, and the dereference of it caused the oops. in selinux_inode_permission(): isec = inode->i_security; rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd); Note, the crash came from stressing the deletion and reading of debugfs files. I was not able to recreate this via normal files. But I'm not sure they are safe. It may just be that the race window is much harder to hit. What seems to have happened (and what I have traced), is the file is being opened at the same time the file or directory is being deleted. As the dentry and inode locks are not held during the path walk, nor is the inodes ref counts being incremented, there is nothing saving these structures from being discarded except for an rcu_read_lock(). The rcu_read_lock() protects against freeing of the inode, but it does not protect freeing of the inode_security_struct. Now if the freeing of the i_security happens with a call_rcu(), and the i_security field of the inode is not changed (it gets freed as the inode gets freed) then there will be no issue here. (Linus Torvalds suggested not setting the field to NULL such that we do not need to check if it is NULL in the permission check). Note, this is a hack, but it fixes the problem at hand. A real fix is to restructure the destroy_inode() to call all the destructor handlers from the RCU callback. But that is a major job to do, and requires a lot of work. For now, we just band-aid this bug with this fix (it works), and work on a more maintainable solution in the future. Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home Cc: stable@vger.kernel.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
We see General Protection Fault on RSI in copy_page_rep: that RSI is what you get from a NULL struct page pointer. RIP: 0010:[<ffffffff81154955>] [<ffffffff81154955>] copy_page_rep+0x5/0x10 RSP: 0000:ffff880136e15c00 EFLAGS: 00010286 RAX: ffff880000000000 RBX: ffff880136e14000 RCX: 0000000000000200 RDX: 6db6db6db6db6db7 RSI: db73880000000000 RDI: ffff880dd0c00000 RBP: ffff880136e15c18 R08: 0000000000000200 R09: 000000000005987c R10: 000000000005987c R11: 0000000000000200 R12: 0000000000000001 R13: ffffea00305aa000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f195752f700(0000) GS:ffff880c7fc20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000093010000 CR3: 00000001458e1000 CR4: 00000000000027e0 Call Trace: copy_user_huge_page+0x93/0xab do_huge_pmd_wp_page+0x710/0x815 handle_mm_fault+0x15d8/0x1d70 __do_page_fault+0x14d/0x840 do_page_fault+0x2f/0x90 page_fault+0x22/0x30 do_huge_pmd_wp_page() tests is_huge_zero_pmd(orig_pmd) four times: but since shrink_huge_zero_page() can free the huge_zero_page, and we have no hold of our own on it here (except where the fourth test holds page_table_lock and has checked pmd_same), it's possible for it to answer yes the first time, but no to the second or third test. Change all those last three to tests for NULL page. (Note: this is not the same issue as trinity's DEBUG_PAGEALLOC BUG in copy_page_rep with RSI: ffff88009c422000, reported by Sasha Levin in https://lkml.org/lkml/2013/3/29/103. I believe that one is due to the source page being split, and a tail page freed, while copy is in progress; and not a problem without DEBUG_PAGEALLOC, since the pmd_same check will prevent a miscopy from being made visible.) Fixes: 97ae1749 ("thp: implement refcounting for huge zero page") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # v3.10 v3.11 v3.12 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ming Lei authored
When queue_mode is NULL_Q_MQ and null_blk is being removed, blk_cleanup_queue() isn't called to cleanup queue, so the queue allocated won't be freed. This patch calls blk_cleanup_queue() for MQ to drain all pending requests first and release the reference counter of queue kobject, then blk_mq_free_queue() will be called in queue kobject's release handler when queue kobject's reference counter drops to zero. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 10 Jan, 2014 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Famouse last words: "final pull request" :-) I'm sending this because Jason Wang's fixes are pretty important 1) Add missing per-cpu stats initialization to ip6_vti. Otherwise lockdep spits out a call trace. From Li RongQing. 2) Fix NULL oops in wireless hwsim, from Javier Lopez 3) TIPC deferred packet queue unlink must NULL out skb->next to avoid crashes. From Erik Hugne 4) Fix access to uninitialized buffer in nf_nat netfilter code, from Daniel Borkmann 5) Fix lifetime of ipv6 loopback and SIT tunnel addresses, otherwise they basically timeout immediately. From Hannes Frederic Sowa 6) Fix DMA unmapping of TSO packets in bnx2x driver, from Michal Schmidt 7) Do not allow L2 forwarding offload via macvtap device, the way things are now it will not end up being forwaded at all. From Jason Wang 8) Fix transmit queue selection via ndo_dfwd_start_xmit(), fixing things like applying NETIF_F_LLTX to the wrong device (!!) and eliding the proper transmit watchdog handling 9) qlcnic driver was not updating tx statistics at all, from Manish Chopra" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: qlcnic: Fix ethtool statistics length calculation qlcnic: Fix bug in TX statistics net: core: explicitly select a txq before doing l2 forwarding macvlan: forbid L2 fowarding offload for macvtap bnx2x: fix DMA unmapping of TSO split BDs ipv6: add link-local, sit and loopback address with INFINITY_LIFE_TIME bnx2x: prevent WARN during driver unload tipc: correctly unlink packets from deferred packet queue ipv6: pcpu_tstats.syncp should be initialised in ip6_vti.c netfilter: only warn once on wrong seqadj usage netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper NFC: Fix target mode p2p link establishment iwlwifi: add new devices for 7265 series mac80211: move "bufferable MMPDU" check to fix AP mode scan mac80211_hwsim: Fix NULL pointer dereference
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull xfs bugfixes from Ben Myers: "Here we have a bugfix for an off-by-one in the remote attribute verifier that results in a forced shutdown which you can hit with v5 superblock by creating a 64k xattr, and a fix for a missing destroy_work_on_stack() in the allocation worker. It's a bit late, but they are both fairly straightforward" * tag 'xfs-for-linus-v3.13-rc8' of git://oss.sgi.com/xfs/xfs: xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK() xfs: fix off-by-one error in xfs_attr3_rmt_verify
-
Linus Torvalds authored
Merge branch 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED fix from Bryan Wu: "Pali Rohár and Pavel Machek reported the LED of Nokia N900 doesn't work with our latest 3.13-rc6 kernel. Milo fixed the regression here" * 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: lp5521/5523: Remove duplicate mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: - Recent commits modifying the lists of C-states in the intel_idle driver introduced bugs leading to crashes on some systems. Two fixes from Jiang Liu. - The ACPI AC driver should receive all types of notifications, but recent change made it ignore some of them. Fix from Alexander Mezin. - intel_pstate's validity checks for MSRs it depends on are not sufficient to catch the lack of support in nested KVM setups, so they are extended to cover that case. From Dirk Brandewie. - NEC LZ750/LS has a botched up _BIX method in its ACPI tables, so our ACPI battery driver needs a quirk for it. From Lan Tianyu. - The tpm_ppi driver sometimes leaks memory allocated by acpi_get_name(). Fix from Jiang Liu. * tag 'pm+acpi-3.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: close avn_cstates array with correct marker Revert "intel_idle: mark states tables with __initdata tag" ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters. ACPI / TPM: fix memory leak when walking ACPI namespace ACPI / AC: change notification handler type to ACPI_ALL_NOTIFY
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixesLinus Torvalds authored
Pull MFD fix from Samuel Ortiz: "This is the 2nd MFD pull request for 3.13 It only contains one fix for the rtsx_pcr driver. Without it we see a kernel panic on some machines, when resuming from suspend to RAM" * tag 'mfd-fixes-3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: rtsx_pcr: Disable interrupts before cancelling delayed works
-
Milo Kim authored
It can be a problem when a pattern is loaded via the firmware interface. LP55xx common driver has already locked the mutex in 'lp55xx_firmware_loaded()'. So it should be deleted. On the other hand, locks are required in store_engine_load() on updating program memory. Reported-by: Pali Rohár <pali.rohar@gmail.com> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com> Cc: <stable@vger.kernel.org>
-
Chuansheng Liu authored
In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to call destroy_work_on_stack() which frees the debug object to pair with INIT_WORK_ONSTACK(). Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 6f96b306)
-
Jie Liu authored
With CRC check is enabled, if trying to set an attributes value just equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote attr write verification procedure failure, which would yield the back trace like below: <snip> XFS (sda7): Internal error xfs_attr3_rmt_write_verify at line 191 of file fs/xfs/xfs_attr_remote.c <snip> Call Trace: [<ffffffff816f0042>] dump_stack+0x45/0x56 [<ffffffffa0d99c8b>] xfs_error_report+0x3b/0x40 [xfs] [<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffffa0d99ce5>] xfs_corruption_error+0x55/0x80 [xfs] [<ffffffffa0dbef6b>] xfs_attr3_rmt_write_verify+0x14b/0x1a0 [xfs] [<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d96edd>] _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffff81184cda>] ? vm_map_ram+0x31a/0x460 [<ffffffff81097230>] ? wake_up_state+0x20/0x20 [<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d9726b>] xfs_buf_iorequest+0x6b/0xc0 [xfs] [<ffffffffa0d97315>] xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d97906>] xfs_bwrite+0x46/0x80 [xfs] [<ffffffffa0dbfa94>] xfs_attr_rmtval_set+0x334/0x490 [xfs] [<ffffffffa0db84aa>] xfs_attr_leaf_addname+0x24a/0x410 [xfs] [<ffffffffa0db8893>] xfs_attr_set_int+0x223/0x470 [xfs] [<ffffffffa0db8b76>] xfs_attr_set+0x96/0xb0 [xfs] [<ffffffffa0db13b2>] xfs_xattr_set+0x42/0x70 [xfs] [<ffffffff811df9b2>] generic_setxattr+0x62/0x80 [<ffffffff811e0213>] __vfs_setxattr_noperm+0x63/0x1b0 [<ffffffff81307afe>] ? evm_inode_setxattr+0xe/0x10 [<ffffffff811e0415>] vfs_setxattr+0xb5/0xc0 [<ffffffff811e054e>] setxattr+0x12e/0x1c0 [<ffffffff811c6e82>] ? final_putname+0x22/0x50 [<ffffffff811c708b>] ? putname+0x2b/0x40 [<ffffffff811cc4bf>] ? user_path_at_empty+0x5f/0x90 [<ffffffff811bdfd9>] ? __sb_start_write+0x49/0xe0 [<ffffffff81168589>] ? vm_mmap_pgoff+0x99/0xc0 [<ffffffff811e07df>] SyS_setxattr+0x8f/0xe0 [<ffffffff81700c2d>] system_call_fastpath+0x1a/0x1f Tests: setfattr -n user.longxattr -v `perl -e 'print "A"x65536'` testfile This patch fix it to check the remote EA size is greater than the XATTR_SIZE_MAX rather than more than or equal to it, because it's valid if the specified EA value size is equal to the limitation as per VFS setxattr interface. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 85dd0707)
-
Shahed Shaikh authored
o Consider number of Tx queues while calculating the length of Tx statistics as part of ethtool stats. o Calculate statistics lenght properly for 82xx and 83xx adapter Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
o Driver was not updating TX stats so it was not populating statistics in `ifconfig` command output. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-