drm-hisilicon-next for 4.7

Add new hisilicon kirin drm driver:
- Add maintainer for hisilicon DRM driver
- Add support for external bridge
- Add designware dsi host driver
- Add designware dsi encoder driver
- Add cma fbdev and hotplug
- Add vblank driver for ADE
- Add plane driver for ADE
- Add crtc driver for ADE
- Add hisilicon kirin drm master driver
- Add device tree binding for hi6220 display subsystem

* tag 'drm-hisilicon-next-2016-04-29' of github.com:xin3liang/linux:
  MAINTAINERS: Add maintainer for hisilicon DRM driver
  drm/hisilicon: Add support for external bridge
  drm/hisilicon: Add designware dsi host driver
  drm/hisilicon: Add designware dsi encoder driver
  drm/hisilicon: Add cma fbdev and hotplug
  drm/hisilicon: Add vblank driver for ADE
  drm/hisilicon: Add plane driver for ADE
  drm/hisilicon: Add crtc driver for ADE
  drm/hisilicon: Add hisilicon kirin drm master driver
  drm/hisilicon: Add device tree binding for hi6220 display subsystem

Here are a few amdkfd patches for 4.7, all of them fixes according to
the Coccinelle tool.

* tag 'drm-amdkfd-next-2016-05-04' of git://people.freedesktop.org/~gabbayo/linux:
  amdkfd: Trim unnescessary intermediate err var in kfd_chardev.c
  amdkfd: Trim off unnescessary semicolon from kfd_packet_manager.c
  amdkfd: Use the canonical form in branch predicates

Merge branch 'drm-rockchip-next-fixes-05-03' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

Here are some little fixes for rockchip drm, looks good for me, and seems there is no doubt on them, So I'd like you can land them.

* 'drm-rockchip-next-fixes-05-03' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: Initialize vskiplines to zero
  drm/rockchip: vop: fix iommu crash with async atomic
  drm/rockchip: support non-iommu buffer path
  drm/rockchip: get rid of rockchip_drm_crtc_mode_config
  drm/rockchip: inno_hdmi: fix an error code
  drm/rockchip: don't leak iommu mapping
  drm/rockchip: remove redundant statement

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
 - Support for pipeline clock between KMS drivers.
   . Exynos SoC is required to control clocks across KMS drivers
     according to Exynos SoC version. So this patch refactos
     some relevant codes and provides generic solution for it.
 - Add Exynos5433 SoC support to HDMI parts - HDMI and DECON-TV.
 - Add HW trigger mode support to CRTC drivers.
   . In case of using i80 Panel, some Exynos SoC supports HW trigger
     mode so this patch makes trigger mode - HW or SW trigger - to be
     set according to SoC version properly.
 - And some cleanups and regression fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (39 commits)
  drm/exynos: clean up register definions for fimd and decon
  drm/exynos: decon: clean up interface type
  drm/exynos: fimd: add HW trigger support
  drm/exynos: clean up wait_for_vblank
  drm/exynos: mixer: use generic of_device_get_match_data helper
  drm/exynos: mixer: remove support for non-dt platforms
  drm/exynos: hdmi: use generic of_device_get_match_data helper
  drm/exynos: rotator: use generic of_device_get_match_data helper
  drm/exynos: fimd: use generic of_device_get_match_data helper
  drm/exynos: dsi: use generic of_device_get_match_data helper
  drm/exynos: exynos5433_decon: use generic of_device_get_match_data helper
  drm/exynos: convert clock_enable crtc callback to pipeline clock
  drm/exynos/mixer: enable HDMI-PHY before configuring MIXER
  drm/exynos/decon5433: enable HDMI-PHY before configuring DECON
  drm/exynos: add support for pipeline clock to the framework
  drm/exynos: add helper to get crtc from pipe
  drm/exynos/decon5433: do not protect window in plane disable
  drm/exynos/decon5433: reset decon on start
  drm/exynos/decon5433: fix DECON standalone update
  drm/exynos/hdmi: remove registry dump
  ...

This pull request brings in DPI panel support, gamma ramp support, and
render nodes for vc4.

* tag 'drm-vc4-next-2016-05-02' of https://github.com/anholt/linux:
  drm/vc4: Add missing render node support
  drm/vc4: Add support for gamma ramps.
  drm/vc4: Fix NULL deref in HDMI init error path
  drm/vc4: Add DPI driver
  drm: Add an encoder and connector type enum for DPI.

- prep work for struct_mutex-less gem_free_object
- more invasive/tricky mst fixes from Lyude for broken hw. I discussed
  this with Ville/Jani and we all agreed more soaking in -next would be
  real good this late in the -rc cycle. They're cc: stable too to make
  sure they're not getting lost. Feel free to cherry-pick those four if
  you disagree.
- few small things all over

* tag 'topic/drm-misc-2016-04-29' of git://anongit.freedesktop.org/drm-intel:
  drm/atomic: Add missing drm_crtc_internal.h include
  drm/dp: Allow signals to interrupt drm_aux-dev reads/writes
  drm: Quiet down drm_mode_getresources
  drm: Quiet down drm_mode_getconnector
  drm: Protect dev->filelist with its own mutex
  drm: Make drm_vm_open/close_locked private to drm_vm.c
  drm: Hide master MAP cleanup in drm_bufs.c
  drm: Forbid legacy MAP functions for DRIVER_MODESET
  drm: Push struct_mutex into ->master_destroy
  drm: Move drm_getmap into drm_bufs.c and give it a legacy prefix
  drm: Put legacy lastclose work into drm_legacy_dev_reinit
  drm: Give drm_agp_clear drm_legacy_ prefix
  drm/sysfs: Annote lockless show functions with READ_ONCE
  MAINTAINERS: Update the files list for the GMA500 DRM driver
  drm: rcar-du: Fix compilation warning
  drm/i915: Get rid of intel_dp_dpcd_read_wake()
  drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read()
  drm/dp_helper: Retry aux transactions on all errors
  drm/dp_helper: Always wait before retrying native aux transactions

- more userptr cornercase fixes from Chris
- clean up and tune forcewake handling (Tvrtko)
- more underrun fixes from Ville, mostly for ilk to appeas CI
- fix unclaimed register warnings on vlv/chv and enable the debug code to catch
  them by default (Ville)
- skl gpu hang fixes for gt3/4 (Mika Kuoppala)
- edram improvements for gen9+ (Mika again)
- clean up gpu reset corner cases (Chris)
- fix ctx/ring machine deaths on snb/ilk (Chris)
- MOCS programming for all engines (Peter Antoine)
- robustify/clean up vlv/chv irq handler (Ville)
- split gen8+ irq handlers into ack/handle phase (Ville)
- tons of bxt rpm fixes (mostly around firmware interactions), from Imre
- hook up panel fitting for dsi panels (Ville)
- more runtime PM fixes all over from Imre
- shrinker polish (Chris)
- more guc fixes from Alex Dai and Dave Gordon
- tons of bugfixes and small polish all over (but with a big focus on bxt)

* tag 'drm-intel-next-2016-04-25' of git://anongit.freedesktop.org/drm-intel: (142 commits)
  drm/i915: Update DRIVER_DATE to 20160425
  drm/i915/bxt: Explicitly clear the Turbo control register
  drm/i915: Correct the i915_frequency_info debugfs output
  drm/i915: Macros to convert PM time interval values to microseconds
  drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
  drm/i915: Fake HDMI live status
  drm/i915/bxt: Force reprogramming a PHY with invalid HW state
  drm/i915/bxt: Wait for PHY1 GRC done if PHY0 was already enabled
  drm/i915/bxt: Use PHY0 GRC value for HW state verification
  drm/i915: use dev_priv directly in gen8_ppgtt_notify_vgt
  drm/i915/bxt: Enable DC5 during runtime resume
  drm/i915/bxt: Sanitize DC state tracking during system resume
  drm/i915/bxt: Don't uninit/init display core twice during system suspend/resume
  drm/i915: Inline intel_suspend_complete
  drm/i915/kbl: Don't WARN for expected secondary MISC IO power well request
  drm/i915: Fix eDP low vswing for Broadwell
  drm/i915: check for ERR_PTR from i915_gem_object_pin_map()
  drm/i915/guc: local optimisations and updating comments
  drm/i915/guc: drop cached copy of 'wq_head'
  drm/i915/guc: keep GuC doorbell & process descriptor mapped in kernel
  ...

There is a path that use vskiplines with non-initialize.
That would cause vop abnormal behavior.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

After async atomic_commit callback, drm_atomic_clean_old_fb will
clean all old fb, but because async, the old fb may be also on
the vop hardware, dma will access the old fb buffer, clean old
fb will cause iommu page fault.

Reference the fb and unreference it when the fb actuall swap out
from vop hardware.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

Some rockchip vop not support iommu, need use non-iommu
buffer for it. And if we get iommu issues, we can compare
the issues with non-iommu path, that would help the debug.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

We need to take care of the vop status when use
rockchip_drm_crtc_mode_config, if vop is disabled,
the function would failed, that is terrible.

Save output_type and output_mode into rockchip_crtc_state,
it's nice to make them into atomic.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: John Keeping <john@metanate.com>

We were accidentally returning PTR_ERR(NULL) which means success when we
wanted to return a negative error code.

Fixes: 412d4ae6 ('drm/rockchip: hdmi: add Innosilicon HDMI support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Yakir Yang <ykk@rock-chips.com>

arm_iommu_attach_device() takes its own reference to the mapping we give
it.  Since we do not keep a reference to the mapping ourselves, we must
release it before returning.

Also fix the error path, which fails to release the mapping if it has
called arm_iommu_detach_device() since that clears archdata.mapping.
Signed-off-by: John Keeping <john@metanate.com>

The call to arm_iommu_detach_device() on the previous line sets
dev->archdata.mapping to NULL so this call is always a no-op.
Signed-off-by: John Keeping <john@metanate.com>

There shouldn't be any other driver support necessary, since none of
the driver-specific ioctls ever required auth, and none of them deal
with modesetting.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We could possibly save a bit of power by not requesting gamma
conversion when the ramp happens to be 1:1, but at least if all the
CRTCs are off the SRAM will be disabled.

This should fix brightness sliders in a lot of fullscreen games.
Signed-off-by: Eric Anholt <eric@anholt.net>

Found-By: Coccinelle
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

Found-By: Coccinelle
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

Found-By: Coccinelle
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch removes suffixes from I80 relevant register definitions,
which are misleading.

This is based on top of below patch set,
     http://www.spinics.net/lists/dri-devel/msg104057.htmlSigned-off-by: Inki Dae <inki.dae@samsung.com>

This patch cleans up interface type relevant codes.

Trigger mode is determinded only by i80 mode, which isn't
related to Display types - HDMI or Display controller.
So this patch makes the trigger mode to be set only in case of
i80 mode - For DECON-TV, HW Trigger mode is flaged mandatorily
because HDMI Timing Generator generates VSYNC signal
which works as a hardware trigger.

Changelog v2.
- If interface type is HDMI then set out_type to I80.
- fix compile warning.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch adds HW trigger support on i80 mode.

Until now, Exynos DRM only supported SW trigger which was set
SWTRGCMD bit of TRIGCON register by CPU to transfer scanout
buffer to Display bus device or panel.

With this patch, the transmission to Display bus device or
panel will be initiated by FIMD controller.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch cleans up wait_for_vblank relevant codes.
wait_for_vblank callback isn't used anymore in Exynos drm driver
so it removes relevant codes. However, display controllers -
FIMD and DECON - still use this function driver internally
to ensure shadow registers to be updated, which resolves
page fault issue so keep it.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Simplify code by replacing custom code by generic helper.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

There are no non-devicetree based Exynos platforms in mainline, so there
no point keeping old platform driver data for them.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Simplify code by replacing custom code by generic helper.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Simplify code by replacing custom code by generic helper.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Simplify code by replacing custom code by generic helper.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Simplify code by replacing custom code by generic helper and add missing
const qualifier to driver data structures.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Simplify code by replacing custom code by generic helper.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

clock_enable callback is used only by FIMD->DP pipeline. Similar but more
universal functionality provides pipeline clock.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>

According to documentation HDMI-PHY must be on prior to MIXER configuration.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

According to documentation and tests HDMI-PHY must be on prior
to MIXER configuration.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>

Components belonging to the same pipeline often requires
synchronized clocks. Such clocks are sometimes provided
by external clock controller, but they can be also provided by
pipeline components. In latter case there should be a way
to access them from another component belonging to the same pipeline.
This is the case of:
- DECON,FIMD -> HDMI and HDMI-PHY clock,
- FIMD -> DP and DP clock in FIMD.
The latter case has been solved by clock_enable callback
in exynos_drm_crtc_ops. This solutin will not work with
HDMI path as in this case clock is provided by encoder.

This patch provides more generic solution allowing to register
pipeline clock during initialization in exynos_drm_crtc structure.
This way the clock will be easily accessible from both components.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The helper abstracts out conversion from pipeline
to crtc. Currently it is used in two places, but
there will be more uses in next patches.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

decon_atomic_begin and decon_atomic_flush protects all windows already.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Resetting IP at starting ensures that DECON will be in known state
regardless of changes by bootloader.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

DECON should be updated after un-protecting windows and after changing
output parameters, otherwise image is not displayed in case of HDMI path.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

HDMI registry dump unnecessary spoils console and is not very helpful.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

To ensure HDMI-PHY reprogramming will not affect
HDMI the latter should be reset.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>