Again totally unused, so just remove them.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>

No need to create a dummy ioctl function to return -EINVAL, since
that's what the core already does in the absence of the dma_ioctl
callback. So we can safely remove this.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>

Again completely unused, so just remove it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>

Completely unused, so just remove them.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>

Only ever assigned in the context code for real, with no readers
anywhere. Remove it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>

No one ever waits on this waitqueue, so the wake_up call is wasted.
Remove it all.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>

It doesn't do anything, so kill the code.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>

Merge tag 'drm-intel-next-2013-07-12' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

 Highlights:
- follow-up refactoring after the shared dpll rework that landed in 3.11
- oddball prep cleanups from Ben for ppgtt
- encoder->get_config state tracking infrastructure from Jesse
- used by the experimental fastboot support from Jesse (disabled by
  default)
- make the error state file official and add it to our sysfs interface
  (Mika)
- drm_mm prep changes from Ben, prepares to embedd the drm_mm_node (which
  will be used by the vma rework later on)
- interrupt handling rework, follow up cleanups to the VECS enabling, hpd
  storm handling and fifo underrun reporting.
- Big pile of smaller cleanups, code improvements and related stuff.

* tag 'drm-intel-next-2013-07-12' of git://people.freedesktop.org/~danvet/drm-intel: (72 commits)
  drm/i915: clear DPLL reg when disabling i9xx dplls
  drm/i915: Fix up cpt pixel multiplier enable sequence
  drm/i915: clean up vlv ->pre_pll_enable and pll enable sequence
  drm/i915: move error state to own compilation unit
  drm/i915: Don't attempt to read an unitialized stack value
  drm/i915: Use for_each_pipe() when possible
  drm/i915: don't enable PM_VEBOX_CS_ERROR_INTERRUPT
  drm/i915: unify ring irq refcounts (again)
  drm/i915: kill dev_priv->rps.lock
  drm/i915: queue work outside spinlock in hsw_pm_irq_handler
  drm/i915: streamline hsw_pm_irq_handler
  drm/i915: irq handlers don't need interrupt-safe spinlocks
  drm/i915: kill lpt pch transcoder->crtc mapping code for fifo underruns
  drm/i915: improve GEN7_ERR_INT clearing for fifo underrun reporting
  drm/i915: improve SERR_INT clearing for fifo underrun reporting
  drm/i915: extract ibx_display_interrupt_update
  drm/i915: remove unused members from drm_i915_private
  drm/i915: don't frob mm.suspended when not using ums
  drm/i915: Fix VLV DP RBR/HDMI/DAC PLL LPF coefficients
  drm/i915: WARN if the bios reserved range is bigger than stolen size
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c

Pull x86 fixes from Peter Anvin:
 "Trying again to get the fixes queue, including the fixed IDT alignment
  patch.

  The UEFI patch is by far the biggest issue at hand: it is currently
  causing quite a few machines to boot.  Which is sad, because the only
  reason they would is because their BIOSes touch memory that has
  already been freed.  The other major issue is that we finally have
  tracked down the root cause of a significant number of machines
  failing to suspend/resume"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Make sure IDT is page aligned
  x86, suspend: Handle CPUs which fail to #GP on RDMSR
  x86/platform/ce4100: Add header file for reboot type
  Revert "UEFI: Don't pass boot services regions to SetVirtualAddressMap()"
  efivars: check for EFI_RUNTIME_SERVICES

Pull md bug fixes from NeilBrown:
 "Sorry boss, back at work now boss.  Here's them nice shiny patches ya
  wanted.  All nicely tagged and justified for -stable and everyfing:

  Three bug fixes for md in 3.10

  3.10 wasn't a good release for md.  The bio changes left a couple of
  bugs, and an md "fix" created another one.

  These three patches appear to fix the issues and have been tagged for
  -stable"

* tag 'md-3.11-fixes' of git://neil.brown.name/md:
  md/raid1: fix bio handling problems in process_checks()
  md: Remove recent change which allows devices to skip recovery.
  md/raid10: fix two problems with RAID10 resync.

Pull drm fixes from Dave Airlie:
 "You'll be terribly disappointed in this, I'm not trying to sneak any
  features in or anything, its mostly radeon and intel fixes, a couple
  of ARM driver fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits)
  drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
  drm/radeon/dpm/atom: fix broken gcc harder
  drm/radeon/dpm/atom: restructure logic to work around a compiler bug
  drm/radeon/dpm: fix atom vram table parsing
  drm/radeon: fix an endian bug in atom table parsing
  drm/radeon: add a module parameter to disable aspm
  drm/rcar-du: Use the GEM PRIME helpers
  drm/shmobile: Use the GEM PRIME helpers
  uvesafb: Really allow mtrr being 0, as documented and warn()ed
  radeon kms: do not flush uninitialized hotplug work
  drm/radeon/dpm/sumo: handle boost states properly when forcing a perf level
  drm/radeon: align VM PTBs (Page Table Blocks) to 32K
  drm/radeon: allow selection of alignment in the sub-allocator
  drm/radeon: never unpin UVD bo v3
  drm/radeon: fix UVD fence emit
  drm/radeon: add fault decode function for CIK
  drm/radeon: add fault decode function for SI (v2)
  drm/radeon: add fault decode function for cayman/TN (v2)
  drm/radeon: use radeon device for request firmware
  drm/radeon: add missing ttm_eu_backoff_reservation to radeon_bo_list_validate
  ...

Merge tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg KH:
 "Here are some driver core patches for 3.11-rc2.  They aren't really
  bugfixes, but a bunch of new helper macros for drivers to properly
  create attribute groups, which drivers and subsystems need to fix up a
  ton of race issues with incorrectly creating sysfs files (binary and
  normal) after userspace has been told that the device is present.

  Also here is the ability to create binary files as attribute groups,
  to solve that race condition, which was impossible to do before this,
  so that's my fault the drivers were broken.

  The majority of the .c changes is indenting and moving code around a
  bit.  It affects no existing code, but allows the large backlog of 70+
  patches that I already have created to start flowing into the
  different subtrees, instead of having to live in my driver-core tree,
  causing merge nightmares in linux-next for the next few months.

  These were finalized too late for the -rc1 merge window, which is why
  they were didn't make that pull request, testing and review from
  others didn't happen until a few weeks ago, and then there's the whole
  distraction of the past few days, which prevented these from getting
  to you sooner, sorry about that.

  Oh, and there's a bugfix for the documentation build warning in here
  as well.  All of these have been in linux-next this week, with no
  reported problems"

* tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver-core: fix new kernel-doc warning in base/platform.c
  sysfs: use file mode defines from stat.h
  sysfs: add more helper macro's for (bin_)attribute(_groups)
  driver core: add default groups to struct class
  driver core: Introduce device_create_groups
  sysfs: prevent warning when only using binary attributes
  sysfs: add support for binary attributes in groups
  driver core: device.h: add RW and RO attribute macros
  sysfs.h: add BIN_ATTR macro
  sysfs.h: add ATTRIBUTE_GROUPS() macro
  sysfs.h: add __ATTR_RW() macro

Pull hwmon fix from Guenter Roeck:
 "Single patch to staticize a local variable"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (abx500) Staticize abx500_temp_attributes

Pull phase two of __cpuinit removal from Paul Gortmaker:
 "With the __cpuinit infrastructure removed earlier, this group of
  commits only removes the function/data tagging that was done with the
  various (now no-op) __cpuinit related prefixes.

  Now that the dust has settled with yesterday's v3.11-rc1, there
  hopefully shouldn't be any new users leaking back in tree, but I think
  we can leave the harmless no-op stubs there for a release as a
  courtesy to those who still have out of tree stuff and weren't paying
  attention.

  Although the commits are against the recent tag to allow for minor
  context refreshes for things like yesterday's v3.11-rc1~ slab content,
  the patches have been largely unchanged for weeks, aside from such
  trivial updates.

  For detail junkies, the largely boring and mostly irrelevant history
  of the patches can be viewed at:

    http://git.kernel.org/cgit/linux/kernel/git/paulg/cpuinit-delete.git

  If nothing else, I guess it does at least demonstrate the level of
  involvement required to shepherd such a treewide change to completion.

  This is the same repository of patches that has been applied to the
  end of the daily linux-next branches for the past several weeks"

* 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (28 commits)
  block: delete __cpuinit usage from all block files
  drivers: delete __cpuinit usage from all remaining drivers files
  kernel: delete __cpuinit usage from all core kernel files
  rcu: delete __cpuinit usage from all rcu files
  net: delete __cpuinit usage from all net files
  acpi: delete __cpuinit usage from all acpi files
  hwmon: delete __cpuinit usage from all hwmon files
  cpufreq: delete __cpuinit usage from all cpufreq files
  clocksource+irqchip: delete __cpuinit usage from all related files
  x86: delete __cpuinit usage from all x86 files
  score: delete __cpuinit usage from all score files
  xtensa: delete __cpuinit usage from all xtensa files
  openrisc: delete __cpuinit usage from all openrisc files
  m32r: delete __cpuinit usage from all m32r files
  hexagon: delete __cpuinit usage from all hexagon files
  frv: delete __cpuinit usage from all frv files
  cris: delete __cpuinit usage from all cris files
  metag: delete __cpuinit usage from all metag files
  tile: delete __cpuinit usage from all tile files
  sh: delete __cpuinit usage from all sh files
  ...

Pull sound fixes from Takashi Iwai:
 "Except for a slightly big OMAP changes, all rest are small, mostly
  boring changes; all either 3.11 regression fixes or stable materials.

   - ASoC OMAP fixes due to non-DT OMAP4 removals
   - Other ASoC driver changes (sglt5000, wm8978, wm8948, samsung)
   - Fix missing locking for snd_pcm_stop() calls in many drivers
   - Fix the blocking request_module() in OSS sequencer
   - Fix old OSS vwsnd driver builds
   - Add a new HD-audio HDMI codec ID"

* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
  ALSA: seq-oss: Initialize MIDI clients asynchronously
  ALSA: hda - Add new GPU codec ID to snd-hda
  staging: line6: Fix unlocked snd_pcm_stop() call
  [media] saa7134: Fix unlocked snd_pcm_stop() call
  ASoC: s6000: Fix unlocked snd_pcm_stop() call
  ASoC: atmel: Fix unlocked snd_pcm_stop() call
  ALSA: pxa2xx: Fix unlocked snd_pcm_stop() call
  ALSA: usx2y: Fix unlocked snd_pcm_stop() call
  ALSA: ua101: Fix unlocked snd_pcm_stop() call
  ALSA: 6fire: Fix unlocked snd_pcm_stop() call
  ALSA: atiixp: Fix unlocked snd_pcm_stop() call
  ALSA: asihpi: Fix unlocked snd_pcm_stop() call
  sound: oss/vwsnd: Always define vwsnd_mutex
  sound: oss/vwsnd: Add missing inclusion of linux/delay.h
  ASoC: wm8978: enable symmetric rates
  ASoC: omap-mcbsp: Use different method for DMA request when booted with DT
  ASoC: omap-dmic: Do not use platform_get_resource_byname() for DMA
  ASoC: omap-mcpdm: Do not use platform_get_resource_byname() for DMA
  ASoC: omap-pcm: Request the DMA channel differently when DT is involved
  ASoC: Samsung: Set RFS and BFS in slave mode
  ...

Fixes builds
* 'drm/3.11/fixes' of git://linuxtv.org/pinchartl/fbdev:
  drm/rcar-du: Use the GEM PRIME helpers
  drm/shmobile: Use the GEM PRIME helpers

Recent change to use bio_copy_data() in raid1 when repairing
an array is faulty.

The underlying may have changed the bio in various ways using
bio_advance and these need to be undone not just for the 'sbio' which
is being copied to, but also the 'pbio' (primary) which is being
copied from.

So perform the reset on all bios that were read from and do it early.

This also ensure that the sbio->bi_io_vec[j].bv_len passed to
memcmp is correct.

This fixes a crash during a 'check' of a RAID1 array.  The crash was
introduced in 3.10 so this is suitable for 3.10-stable.

Cc: stable@vger.kernel.org (3.10)
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: NeilBrown <neilb@suse.de>

commit 7ceb17e8
    md: Allow devices to be re-added to a read-only array.

allowed a bit more than just that.  It also allows devices to be added
to a read-write array and to end up skipping recovery.

This patch removes the offending piece of code pending a rewrite for a
subsequent release.

More specifically:
 If the array has a bitmap, then the device will still need a bitmap
 based resync ('saved_raid_disk' is set under different conditions
 is a bitmap is present).
 If the array doesn't have a bitmap, then this is correct as long as
 nothing has been written to the array since the metadata was checked
 by ->validate_super.  However there is no locking to ensure that there
 was no write.

Bug was introduced in 3.10 and causes data corruption so
patch is suitable for 3.10-stable.

Cc: stable@vger.kernel.org (3.10)
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: NeilBrown <neilb@suse.de>

1/ When an different between blocks is found, data is copied from
   one bio to the other.  However bv_len is used as the length to
   copy and this could be zero.  So use r10_bio->sectors to calculate
   length instead.
   Using bv_len was probably always a bit dubious, but the introduction
   of bio_advance made it much more likely to be a problem.

2/ When preparing some blocks for sync, we don't set BIO_UPTODATE
   except on bios that we schedule for a read.  This ensures that
   missing/failed devices don't confuse the loop at the top of
   sync_request write.
   Commit 8be185f2 "raid10: Use bio_reset()"
   removed a loop which set BIO_UPTDATE on all appropriate bios.
   So we need to re-add that flag.

These bugs were introduced in 3.10, so this patch is suitable for
3.10-stable, and can remove a potential for data corruption.

Cc: stable@vger.kernel.org (3.10)
Reported-by: Brassow Jonathan <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>

more DPM fixes for radeon.

* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
  drm/radeon/dpm/atom: fix broken gcc harder
  drm/radeon/dpm/atom: restructure logic to work around a compiler bug
  drm/radeon/dpm: fix atom vram table parsing
  drm/radeon: fix an endian bug in atom table parsing
  drm/radeon: add a module parameter to disable aspm

This allows you to look at the current DPM state via
debugfs.

Due to the way the hardware works on these asics, there's
no way to look up exactly what power state we are in, so
we make the best guess we can based on the current sclk.

v2: Anthoine's version
v3: fix ref div
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull nfsd bugfixes from Bruce Fields:
 "Just three minor bugfixes"

* 'for-3.11' of git://linux-nfs.org/~bfields/linux:
  svcrdma: underflow issue in decode_write_list()
  nfsd4: fix minorversion support interface
  lockd: protect nlm_blocked access in nlmsvc_retry_blocked

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It seems gcc 4.8.1 generates bogus code for the old logic causing
part of the function to get skipped.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Parsing the table in incorrectly led to problems with
certain asics with mclk switching.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Can cause hangs when enabled in certain motherboards.
Set radeon.aspm=0 to disable aspm.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The GEM CMA PRIME import/export helpers have been removed in favor of
generic GEM PRIME helpers with GEM CMA low-level operations. Fix the
driver accordingly.
Reported-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Mark Brown <broonie@linaro.org>

The GEM CMA PRIME import/export helpers have been removed in favor of
generic GEM PRIME helpers with GEM CMA low-level operations. Fix the
driver accordingly.
Reported-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Mark Brown <broonie@linaro.org>

We've got bug reports that the module loading stuck on Debian system
with 3.10 kernel.  The debugging session revealed that the initial
registration of OSS sequencer clients stuck at module loading time,
which involves again with request_module() at the init phase.  This is
triggered only by special --install stuff Debian is using, but it's
still not good to have such loops.

As a workaround, call the registration part asynchronously.  This is a
better approach irrespective of the hang fix, in anyway.
Reported-and-tested-by: Philipp Matthias Hahn <pmhahn@pmhahn.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix new kernel-doc warning in drivers/base/platform.c:

Warning(drivers/base/platform.c:528): No description found for parameter 'owner'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

__list_for_each used to be the non prefetch() aware list walking
primitive.  When we removed the prefetch macros from the list routines,
it became redundant.  Given it does exactly the same thing as
list_for_each now, we might as well remove it and call list_for_each
directly.

All users of __list_for_each have been converted to list_for_each calls
in the current merge window.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

One feature latecomer, I've forgotten to merge the patch to reeanble the
Haswell power well feature now that the audio interaction is fixed up.
Since that was the only unfixed issue with it I've figured I could throw
it in a bit late, and it's trivial to revert in case I'm wrong.

Otherwise all bug/regression fixes:
- Fix status page reinit after gpu hangs, spotted by more paranoid igt
  checks.
- Fix object list walking fumble regression in the shrinker (only the
  counting part, the actual shrinking code was correct so no Oops
  potential), from Xiong Zhang.
- Fix DP 1.2 bw limits (Imre).
- Restore legacy forcewake on ivb, too many broken biosen out there. We
  dump a warn though that recent userspace might fall over with that
  config (Guenter Roeck).
- Patch up the gen2 cs tlb w/a.
- Improve the fence coherency w/a now that we have a better understanding
  what's going on. The removed wbinvd+ipi should make -rt folks happy. Big
  thanks to Jon Bloomfield for figuring this out, patches from Chris.
- Fix write-read race when switching ring (Chris). Spotted with code
  inspection, but now we also have an igt for it.

There's an ugly regression we're still working on introduced between
3.10-rc7 and 3.10.0. Unfortunately we can't just revert the offender since
that one fixes another regression :( I've asked Steven to include my
-fixes branch into linux-next to prevent such fallout in the future,
hopefully.

* tag 'drm-intel-fixes-2013-07-11' of git://people.freedesktop.org/~danvet/drm-intel:
  Revert "drm/i915: Workaround incoherence between fences and LLC across multiple CPUs"
  drm/i915: Fix incoherence with fence updates on Sandybridge+
  drm/i915: Fix write-read race with multiple rings
  Partially revert "drm/i915: unconditionally use mt forcewake on hsw/ivb"
  drm/i915: fix lane bandwidth capping for DP 1.2 sinks
  drm/i915: fix up ring cleanup for the i830/i845 CS tlb w/a
  drm/i915: Correct obj->mm_list link to dev_priv->dev_priv->mm.inactive_list
  drm/i915: switch disable_power_well default value to 1
  drm/i915: reinit status page registers after gpu reset

Since the IDT is referenced from a fixmap, make sure it is page aligned.
Merge with 32-bit one, since it was already aligned to deal with F00F
bug. Since bss is cleared before IDT setup, it can live there. This also
moves the other *_idt_table variables into common locations.

This avoids the risk of the IDT ever being moved in the bss and having
the mapping be offset, resulting in calling incorrect handlers. In the
current upstream kernel this is not a manifested bug, but heavily patched
kernels (such as those using the PaX patch series) did encounter this bug.

The tables other than idt_table technically do not need to be page
aligned, at least not at the current time, but using a common
declaration avoids mistakes.  On 64 bits the table is exactly one page
long, anyway.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20130716183441.GA14232@www.outflux.netReported-by: PaX Team <pageexec@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

With the last patches stat.h was included to the header, and thus those
permission defines should be used.
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With the recent changes to sysfs there's various helper macro's.
However there's no RW, RO BIN_ helper macro's. This patch adds them.
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We should be using groups, not attribute lists, for classes to allow
subdirectories, and soon, binary files.  Groups are just more flexible
overall, so add them.

The dev_attrs list will go away after all in-kernel users are converted
to use dev_groups.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

device_create_groups lets callers create devices as well as associated
sysfs attributes with a single call. This avoids race conditions seen
if sysfs attributes on new devices are created later.

[fixed up comment block placement and add checks for printk buffer
formats - gregkh]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When only using bin_attrs instead of attrs the kernel prints a warning
and refuses to create the sysfs entry. This fixes that.
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

groups should be able to support binary attributes, just like it
supports "normal" attributes.  This lets us only handle one type of
structure, groups, throughout the driver core and subsystems, making
binary attributes a "full fledged" part of the driver model, and not
something just "tacked on".
Reported-by: Oliver Schinagl <oliver@schinagl.nl>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>