- 11 Feb, 2017 11 commits
-
-
Arnd Bergmann authored
When we enable COMPILE_TEST building for the Atmel sha and tdes implementations, we run into a couple of warnings about incorrect format strings, e.g. In file included from include/linux/platform_device.h:14:0, from drivers/crypto/atmel-sha.c:24: drivers/crypto/atmel-sha.c: In function 'atmel_sha_xmit_cpu': drivers/crypto/atmel-sha.c:571:19: error: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Werror=format=] In file included from include/linux/printk.h:6:0, from include/linux/kernel.h:13, from drivers/crypto/atmel-tdes.c:17: drivers/crypto/atmel-tdes.c: In function 'atmel_tdes_crypt_dma_stop': include/linux/kern_levels.h:4:18: error: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'size_t {aka long unsigned int}' [-Werror=format=] These are all fixed by using the "%z" modifier for size_t data. There are also a few uses of min()/max() with incompatible types: drivers/crypto/atmel-tdes.c: In function 'atmel_tdes_crypt_start': drivers/crypto/atmel-tdes.c:528:181: error: comparison of distinct pointer types lacks a cast [-Werror] Where possible, we should use consistent types here, otherwise we can use min_t()/max_t() to get well-defined behavior without a warning. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Arnd Bergmann authored
With the new authenc support, we get a harmless Kconfig warning: warning: (CRYPTO_DEV_ATMEL_AUTHENC) selects CRYPTO_DEV_ATMEL_SHA which has unmet direct dependencies (CRYPTO && CRYPTO_HW && ARCH_AT91) The problem is that each of the options has slightly different dependencies, although they all seem to want the same thing: allow building for real AT91 targets that actually have the hardware, and possibly for compile testing. This makes all four options consistent: instead of depending on a particular dmaengine implementation, we depend on the ARM platform, CONFIG_COMPILE_TEST as an alternative when that is turned off. This makes the 'select' statements work correctly. Fixes: 89a82ef8 ("crypto: atmel-authenc - add support to authenc(hmac(shaX), Y(aes)) modes") Signed-off-by:
-
Ard Biesheuvel authored
Instead of unconditionally forcing 4 byte alignment for all generic chaining modes that rely on crypto_xor() or crypto_inc() (which may result in unnecessary copying of data when the underlying hardware can perform unaligned accesses efficiently), make those functions deal with unaligned input explicitly, but only if the Kconfig symbol HAVE_EFFICIENT_UNALIGNED_ACCESS is set. This will allow us to drop the alignmasks from the CBC, CMAC, CTR, CTS, PCBC and SEQIV drivers. For crypto_inc(), this simply involves making the 4-byte stride conditional on HAVE_EFFICIENT_UNALIGNED_ACCESS being set, given that it typically operates on 16 byte buffers. For crypto_xor(), an algorithm is implemented that simply runs through the input using the largest strides possible if unaligned accesses are allowed. If they are not, an optimal sequence of memory accesses is emitted that takes the relative alignment of the input buffers into account, e.g., if the relative misalignment of dst and src is 4 bytes, the entire xor operation will be completed using 4 byte loads and stores (modulo unaligned bits at the start and end). Note that all expressions involving misalign are simply eliminated by the compiler when HAVE_EFFICIENT_UNALIGNED_ACCESS is defined. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
An ancient gcc bug (first reported in 2003) has apparently resurfaced on MIPS, where kernelci.org reports an overly large stack frame in the whirlpool hash algorithm: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] With some testing in different configurations, I'm seeing large variations in stack frames size up to 1500 bytes for what should have around 300 bytes at most. I also checked the reference implementation, which is essentially the same code but also comes with some test and benchmarking infrastructure. It seems that recent compiler versions on at least arm, arm64 and powerpc have a partial fix for this problem, but enabling "-fsched-pressure", but even with that fix they suffer from the issue to a certain degree. Some testing on arm64 shows that the time needed to hash a given amount of data is roughly proportional to the stack frame size here, which makes sense given that the wp512 implementation is doing lots of loads for table lookups, and the problem with the overly large stack is a result of doing a lot more loads and stores for spilled registers (as seen from inspecting the object code). Disabling -fschedule-insns consistently fixes the problem for wp512, in my collection of cross-compilers, the results are consistently better or identical when comparing the stack sizes in this function, though some architectures (notable x86) have schedule-insns disabled by default. The four columns are: default: -O2 press: -O2 -fsched-pressure nopress: -O2 -fschedule-insns -fno-sched-pressure nosched: -O2 -no-schedule-insns (disables sched-pressure) default press nopress nosched alpha-linux-gcc-4.9.3 1136 848 1136 176 am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 cris-linux-gcc-4.9.3 272 272 272 272 frv-linux-gcc-4.9.3 1128 1000 1128 280 hppa64-linux-gcc-4.9.3 1128 336 1128 184 hppa-linux-gcc-4.9.3 644 308 644 276 i386-linux-gcc-4.9.3 352 352 352 352 m32r-linux-gcc-4.9.3 720 656 720 268 microblaze-linux-gcc-4.9.3 1108 604 1108 256 mips64-linux-gcc-4.9.3 1328 592 1328 208 mips-linux-gcc-4.9.3 1096 624 1096 240 powerpc64-linux-gcc-4.9.3 1088 432 1088 160 powerpc-linux-gcc-4.9.3 1080 584 1080 224 s390-linux-gcc-4.9.3 456 456 624 360 sh3-linux-gcc-4.9.3 292 292 292 292 sparc64-linux-gcc-4.9.3 992 240 992 208 sparc-linux-gcc-4.9.3 680 592 680 312 x86_64-linux-gcc-4.9.3 224 240 272 224 xtensa-linux-gcc-4.9.3 1152 704 1152 304 aarch64-linux-gcc-7.0.0 224 224 1104 208 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 mips-linux-gcc-7.0.0 1120 648 1120 272 x86_64-linux-gcc-7.0.1 240 240 304 240 arm-linux-gnueabi-gcc-4.4.7 840 392 arm-linux-gnueabi-gcc-4.5.4 784 728 784 320 arm-linux-gnueabi-gcc-4.6.4 736 728 736 304 arm-linux-gnueabi-gcc-4.7.4 944 784 944 352 arm-linux-gnueabi-gcc-4.8.5 464 464 760 352 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336 arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 Trying the same test for serpent-generic, the picture is a bit different, and while -fno-schedule-insns is generally better here than the default, -fsched-pressure wins overall, so I picked that instead. default press nopress nosched alpha-linux-gcc-4.9.3 1392 864 1392 960 am33_2.0-linux-gcc-4.9.3 536 524 536 528 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 cris-linux-gcc-4.9.3 528 528 528 528 frv-linux-gcc-4.9.3 536 400 536 504 hppa64-linux-gcc-4.9.3 524 208 524 480 hppa-linux-gcc-4.9.3 768 472 768 508 i386-linux-gcc-4.9.3 564 564 564 564 m32r-linux-gcc-4.9.3 712 576 712 532 microblaze-linux-gcc-4.9.3 724 392 724 512 mips64-linux-gcc-4.9.3 720 384 720 496 mips-linux-gcc-4.9.3 728 384 728 496 powerpc64-linux-gcc-4.9.3 704 304 704 480 powerpc-linux-gcc-4.9.3 704 296 704 480 s390-linux-gcc-4.9.3 560 560 592 536 sh3-linux-gcc-4.9.3 540 540 540 540 sparc64-linux-gcc-4.9.3 544 352 544 496 sparc-linux-gcc-4.9.3 544 344 544 496 x86_64-linux-gcc-4.9.3 528 536 576 528 xtensa-linux-gcc-4.9.3 752 544 752 544 aarch64-linux-gcc-7.0.0 432 432 656 480 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 mips-linux-gcc-7.0.0 720 464 720 488 x86_64-linux-gcc-7.0.1 536 528 600 536 arm-linux-gnueabi-gcc-4.4.7 592 440 arm-linux-gnueabi-gcc-4.5.4 776 448 776 544 arm-linux-gnueabi-gcc-4.6.4 776 448 776 544 arm-linux-gnueabi-gcc-4.7.4 768 448 768 544 arm-linux-gnueabi-gcc-4.8.5 488 488 776 544 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 arm-linux-gnueabi-gcc-5.3.1 552 552 776 536 arm-linux-gnueabi-gcc-6.1.1 560 560 776 536 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 I did not do any runtime tests with serpent, so it is possible that stack frame size does not directly correlate with runtime performance here and it actually makes things worse, but it's more likely to help here, and the reduced stack frame size is probably enough reason to apply the patch, especially given that the crypto code is often used in deep call chains. Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/ Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149 Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ard Biesheuvel authored
On ARMv8 implementations that do not support the Crypto Extensions, such as the Raspberry Pi 3, the CCM driver falls back to the generic table based AES implementation to perform the MAC part of the algorithm, which is slow and not time invariant. So add a CBCMAC implementation to the shared glue code between NEON AES and Crypto Extensions AES, so that it can be used instead now that the CCM driver has been updated to look for CBCMAC implementations other than the one it supplies itself. Also, given how these algorithms mostly only differ in the way the key handling and the final encryption are implemented, expose CMAC and XCBC algorithms as well based on the same core update code. Signed-off-by:
-
Ard Biesheuvel authored
Update the generic CCM driver to defer CBC-MAC processing to a dedicated CBC-MAC ahash transform rather than open coding this transform (and much of the associated scatterwalk plumbing) in the CCM driver itself. This cleans up the code considerably, but more importantly, it allows the use of alternative CBC-MAC implementations that don't suffer from performance degradation due to significant setup time (e.g., the NEON based AES code needs to enable/disable the NEON, and load the S-box into 16 SIMD registers, which cannot be amortized over the entire input when using the cipher interface) Signed-off-by:
-
Ard Biesheuvel authored
In preparation of splitting off the CBC-MAC transform in the CCM driver into a separate algorithm, define some test cases for the AES incarnation of cbcmac. Signed-off-by:
-
Ard Biesheuvel authored
Lookup table based AES is sensitive to timing attacks, which is due to the fact that such table lookups are data dependent, and the fact that 8 KB worth of tables covers a significant number of cachelines on any architecture, resulting in an exploitable correlation between the key and the processing time for known plaintexts. For network facing algorithms such as CTR, CCM or GCM, this presents a security risk, which is why arch specific AES ports are typically time invariant, either through the use of special instructions, or by using SIMD algorithms that don't rely on table lookups. For generic code, this is difficult to achieve without losing too much performance, but we can improve the situation significantly by switching to an implementation that only needs 256 bytes of table data (the actual S-box itself), which can be prefetched at the start of each block to eliminate data dependent latencies. This code encrypts at ~25 cycles per byte on ARM Cortex-A57 (while the ordinary generic AES driver manages 18 cycles per byte on this hardware). Decryption is substantially slower. Signed-off-by:
-
Ard Biesheuvel authored
The generic AES code exposes a 32-bit align mask, which forces all users of the code to use temporary buffers or take other measures to ensure the alignment requirement is adhered to, even on architectures that don't care about alignment for software algorithms such as this one. So drop the align mask, and fix the code to use get_unaligned_le32() where appropriate, which will resolve to whatever is optimal for the architecture. Signed-off-by:
-
Tim Chen authored
The flusher and regular multi-buffer computation via mcryptd may race with another. Add here a lock and turn off interrupt to to access multi-buffer computation state cstate->mgr before a round of computation. This should prevent the flusher code jumping in. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Ard Biesheuvel authored
The PMULL based CRC32 implementation already contains code based on the separate, optional CRC32 instructions to fallback to when operating on small quantities of data. We can expose these routines directly on systems that lack the 64x64 PMULL instructions but do implement the CRC32 ones, which makes the driver that is based solely on those CRC32 instructions redundant. So remove it. Note that this aligns arm64 with ARM, whose accelerated CRC32 driver also combines the CRC32 extension based and the PMULL based versions. Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Signed-off-by:
-
- 03 Feb, 2017 29 commits
-
-
Ard Biesheuvel authored
The ARM bit sliced AES core code uses the IV buffer to pass the final keystream block back to the glue code if the input is not a multiple of the block size, so that the asm code does not have to deal with anything except 16 byte blocks. This is done under the assumption that the outgoing IV is meaningless anyway in this case, given that chaining is no longer possible under these circumstances. However, as it turns out, the CCM driver does expect the IV to retain a value that is equal to the original IV except for the counter value, and even interprets byte zero as a length indicator, which may result in memory corruption if the IV is overwritten with something else. So use a separate buffer to return the final keystream block. Signed-off-by:
-
Ard Biesheuvel authored
The arm64 bit sliced AES core code uses the IV buffer to pass the final keystream block back to the glue code if the input is not a multiple of the block size, so that the asm code does not have to deal with anything except 16 byte blocks. This is done under the assumption that the outgoing IV is meaningless anyway in this case, given that chaining is no longer possible under these circumstances. However, as it turns out, the CCM driver does expect the IV to retain a value that is equal to the original IV except for the counter value, and even interprets byte zero as a length indicator, which may result in memory corruption if the IV is overwritten with something else. So use a separate buffer to return the final keystream block. Signed-off-by:
-
Ard Biesheuvel authored
The new bitsliced NEON implementation of AES uses a fallback in two places: CBC encryption (which is strictly sequential, whereas this driver can only operate efficiently on 8 blocks at a time), and the XTS tweak generation, which involves encrypting a single AES block with a different key schedule. The plain (i.e., non-bitsliced) NEON code is more suitable as a fallback, given that it is faster than scalar on low end cores (which is what the NEON implementations target, since high end cores have dedicated instructions for AES), and shows similar behavior in terms of D-cache footprint and sensitivity to cache timing attacks. So switch the fallback handling to the plain NEON driver. Signed-off-by:
-
Ard Biesheuvel authored
The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by:
-
Ard Biesheuvel authored
Shuffle some instructions around in the __hround macro to shave off 0.1 cycles per byte on Cortex-A57. Signed-off-by:
-
Ard Biesheuvel authored
Using simple adrp/add pairs to refer to the AES lookup tables exposed by the generic AES driver (which could be loaded far away from this driver when KASLR is in effect) was unreliable at module load time before commit 41c066f2 ("arm64: assembler: make adr_l work in modules under KASLR"), which is why the AES code used literals instead. So now we can get rid of the literals, and switch to the adr_l macro. Signed-off-by:
-
Ard Biesheuvel authored
Remove the unnecessary alignmask: it is much more efficient to deal with the misalignment in the core algorithm than relying on the crypto API to copy the data to a suitably aligned buffer. Signed-off-by:
-
Ard Biesheuvel authored
Remove the unnecessary alignmask: it is much more efficient to deal with the misalignment in the core algorithm than relying on the crypto API to copy the data to a suitably aligned buffer. Signed-off-by:
-
Ard Biesheuvel authored
Remove the unnecessary alignmask: it is much more efficient to deal with the misalignment in the core algorithm than relying on the crypto API to copy the data to a suitably aligned buffer. Signed-off-by:
-
Ard Biesheuvel authored
Remove the unnecessary alignmask: it is much more efficient to deal with the misalignment in the core algorithm than relying on the crypto API to copy the data to a suitably aligned buffer. Signed-off-by:
-
Ard Biesheuvel authored
Remove the unnecessary alignmask: it is much more efficient to deal with the misalignment in the core algorithm than relying on the crypto API to copy the data to a suitably aligned buffer. Signed-off-by:
-
Harsh Jain authored
Initialise variable after null check. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Harsh Jain <harsh@chelsio.com> Signed-off-by:
-
Harsh Jain authored
Typecast the pointer with correct structure. Signed-off-by:
Atul Gupta <atul.gupta@chelsio.com> Signed-off-by:
-
Harsh Jain authored
Update priorities to 3000 Signed-off-by:
-
Harsh Jain authored
Change cipher algos flags to CRYPTO_ALG_TYPE_ABLKCIPHER. Signed-off-by:
-
Harsh Jain authored
1 Block of encrption can be done with aes-generic. no need of cbc(aes). This patch replaces cbc(aes-generic) with aes-generic. Signed-off-by:
-
Harsh Jain authored
The first argument to list_for_each_entry cannot be NULL. Generated by: scripts/coccinelle/iterators/itnull.cocci Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Harsh Jain authored
Change assign flowc id to each outgoing request.Firmware use flowc id to schedule each request onto HW. FW reply may miss without this change. Reviewed-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Cyrille Pitchen authored
When VERBOSE_DEBUG is defined and SHA_FLAGS_DUMP_REG flag is set in dd->flags, this patch prints the register names and values when performing IO accesses. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by:
-
Cyrille Pitchen authored
This patchs allows to combine the AES and SHA hardware accelerators on some Atmel SoCs. Doing so, AES blocks are only written to/read from the AES hardware. Those blocks are also transferred from the AES to the SHA accelerator internally, without additionnal accesses to the system busses. Hence, the AES and SHA accelerators work in parallel to process all the data blocks, instead of serializing the process by (de)crypting those blocks first then authenticating them after like the generic crypto/authenc.c driver does. Of course, both the AES and SHA hardware accelerators need to be available before we can start to process the data blocks. Hence we use their crypto request queue to synchronize both drivers. Signed-off-by:
-
Cyrille Pitchen authored
This patch fixes the value returned by atmel_aes_handle_queue(), which could have been wrong previously when the crypto request was started synchronously but became asynchronous during the ctx->start() call. Signed-off-by:
-
Cyrille Pitchen authored
This patch adds support to the hmac(shaX) algorithms. Signed-off-by:
-
Cyrille Pitchen authored
This patch adds a simple function to perform data transfer with the DMA controller. Signed-off-by:
-
Cyrille Pitchen authored
This patch adds a simple function to perform data transfer with PIO, hence handled by the CPU. Signed-off-by:
-
Cyrille Pitchen authored
This patch defines an alias macro to SHA_MR_MODE_PDC, which is not suited for DMA usage. Signed-off-by:
-
Cyrille Pitchen authored
This patch simply defines a helper function to test the 'Data Ready' flag of the Status Register. It also gives a chance for the crypto request to be processed synchronously if this 'Data Ready' flag is already set when polling the Status Register. Indeed, running synchronously avoid the latency of the 'Data Ready' interrupt. When the 'Data Ready' flag has not been set yet, we enable the associated interrupt and resume processing the crypto request asynchronously from the 'done' task just as before. Signed-off-by:
-
Cyrille Pitchen authored
This patch modifies the SHA_FLAGS_SHA* flags: those algo flags are now organized as values of a single bitfield instead of individual bits. This allows to reduce the number of bits needed to encode all possible values. Also the new values match the SHA_MR_ALGO_SHA* values hence the algorithm bitfield of the SHA_MR register could simply be set with: mr = (mr & ~SHA_FLAGS_ALGO_MASK) | (ctx->flags & SHA_FLAGS_ALGO_MASK) Signed-off-by:
-
Cyrille Pitchen authored
This patch is a transitional patch. It updates atmel_sha_done_task() to make it more generic. Indeed, it adds a new .resume() member in the atmel_sha_dev structure. This hook is called from atmel_sha_done_task() to resume processing an asynchronous request. Signed-off-by:
-
Cyrille Pitchen authored
This patch is a transitional patch. It splits the atmel_sha_handle_queue() function. Now atmel_sha_handle_queue() only manages the request queue and calls a new .start() hook from the atmel_sha_ctx structure. This hook allows to implement different kind of requests still handled by a single queue. Also when the req parameter of atmel_sha_handle_queue() refers to the very same request as the one returned by crypto_dequeue_request(), the queue management now gives a chance to this crypto request to be handled synchronously, hence reducing latencies. The .start() hook returns 0 if the crypto request was handled synchronously and -EINPROGRESS if the crypto request still need to be handled asynchronously. Besides, the new .is_async member of the atmel_sha_dev structure helps tagging this asynchronous state. Indeed, the req->base.complete() callback should not be called if the crypto request is handled synchronously. Signed-off-by:
-
