Merge tag 'v4.3-rockchip32-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Fixes for non-standard and inverted regulator-suspend-properties
on veyron boards.

* tag 'v4.3-rockchip32-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: correct regulator power states for suspend
  ARM: dts: rockchip: correct regulator PM properties
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

ARM: tegra: Devicetree changes for v4.3-rc1

Enables CPU frequency scaling on Jetson TK1 and enables the GK20A GPU on
Venice2 and Jetson TK1. This also enables support for the PMU hardware
found on Tegra124, which among other things, can be used for performance
measurements.

* tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Add gpio-ranges property
  ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
  ARM: tegra: Add Tegra124 PMU support
  ARM: tegra: jetson-tk1: Add GK20A GPU DT node
  ARM: tegra: venice2: Add GK20A GPU DT node
  ARM: tegra: Add IOMMU node to GK20A
  ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
  ARM: tegra: Add entries for cpufreq on Tegra124
  ARM: tegra: Enable the DFLL on the Jetson TK1
  ARM: tegra: Add the DFLL to Tegra124 device tree
  pinctrl: tegra: Only set the gpio range if needed
  clk: tegra: Add the DFLL as a possible parent of the cclk_g clock
  clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend
  clk: tegra: Add Tegra124 DFLL clocksource platform driver
  clk: tegra: Add DFLL DVCO reset control for Tegra124
  clk: tegra: Introduce ability for SoC-specific reset control callbacks
  clk: tegra: Add functions for parsing CVB tables
  clk: tegra: Add closed loop support for the DFLL
  clk: tegra: Add library for the DFLL clock source (open-loop mode)
  clk: tegra: Add binding for the Tegra124 DFLL clocksource
Signed-off-by: Olof Johansson <olof@lixom.net>

Specify how the GPIOs map to the pins in Tegra SoCs, so the dependency is
explicit.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Current base address is wrong by 0x04 bytes for AHB bus device as shown
in dmesg:

	tegra-ahb 6000c004.ahb: incorrect AHB base address in DT data - enabling workaround

To correct old DTBs, commit ce7a10b0 ("ARM: 8334/1: amba: tegra-ahb:
detect and correct bogus base address") checks for the low bit of the
base address and removes theses 0x04 bytes at runtime.

This patch fixes the original DTS, so upstream version doesn't need the
workaround of the base address.

As both addresses are valid, this patch doesn't break compatibility.

Tested on tegra20-paz00 (aka ac100).
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This patch modifies the device tree for Tegra124 based devices to enable
the Cortex A15 PMU. The interrupt numbers are taken from NVIDIA Tegra K1
TRM (DP-06905-001_v03p). This patch was tested on a Jetson TK1.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add the device-tree node for the GK20A GPU and leave it disabled.
It is the responsibility of the bootloader to enable it if the
VPR registers have been programmed such that the GPU can operate.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add the device-tree node for the GK20A GPU and leave it disabled.
It is the responsibility of the bootloader to enable it if the
VPR registers have been programmed such that the GPU can operate.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

Nouveau can make use of the IOMMU to make physical appear linear in the
GPU address space.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Specify the CPU voltage regulator for the cpufreq driver.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The Tegra124 cpufreq driver relies on certain clocks being present
in the /cpus/cpu@0 node.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add the board-specific properties of the DFLL for the Jetson TK1 board.
On this board, the DFLL will take control of the sd0 regulator on the
on-board AS3722 PMIC.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The DFLL clocksource is a separate IP block from the usual
clock-and-reset controller, so it gets its own device tree node.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This SoC is integrated with 4 Cortex-A9 cores.  The GIC bindings
document says that the bits[15:8] of the 3rd cell of the interrupts
property represents PPI interrupt CPU mask.  Because the timer
interrupts are wired to all of the 4 cores, bits[15:8] should be set
to 0xf.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

When getting translated from a downstream device tree that used slightly
different DT bindings, these regulators got labeled with the
"on-in-suspend" state, when they were actually supposed to be turned off
for S3 suspend. This was harmless, but not intentional, AFAICT.

Let's turn them off to get the optimal power state.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This DTS file was submitted with non-upstream bindings. I happened
across this while reviewing the jaq DTS.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Merge tag 'omap-for-v4.3/dt-pt4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Fix up bogus RTC compatible change for am4372 and add missing
DPLL for am4372 cpsw Ethernet driver. Also add ARM global and
local timers for am4372.

* tag 'omap-for-v4.3/dt-pt4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm: boot: dts: am4372: add ARM timers and SCU nodes
  ARM: dts: AM4372: Add the am4372-rtc compatible string
  ARM: dts: am4372: Set the default clock rate for dpll_clksel_mac_clk clock
  ARM: dts: AM437X: add dpll_clksel_mac_clk node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt4-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Fourth Round of Renesas ARM Based SoC DT Updates for v4.3

* Enable Clock Domain support of the Clock Pulse Generator (CPG)
  Module Stop (MSTP) Clocks driver.

* tag 'renesas-dt4-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r8a7779 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r8a7778 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r7s72100 dtsi: Add CPG/MSTP Clock Domain
  clk: shmobile: rz: Add CPG/MSTP Clock Domain support
  clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support
  clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support
  clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support
  clk: shmobile: Add CPG/MSTP Clock Domain support
Signed-off-by: Olof Johansson <olof@lixom.net>

The sp810 clk driver is calling the clk consumer APIs from
clk_prepare ops to change the parent to a 1 MHz fixed rate clock
for each of the clocks that the driver provides. Use
assigned-clock-parents for this instead of doing it in the driver
to avoid using the consumer API in provider code. This also
allows us to remove the usage of clk provider APIs that take a
struct clk as an argument from the sp810 driver.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The i.MX device tree updates for 4.3:
 - Add audio and eTSEC device support and update dspi node for LS1021A.
 - Add initial i.MX6UL and imx6ul-14x14-evk board support, and enable
   a bunch of device support for i.MX6UL, including RTC, power key, USB,
   QSPI, and dual FEC.
 - Enable HDMI and LVDS dual display support for a few imx6qdl boards.
 - Support of imx6sl-warp board rev1.12, the version which will be
   publicly available for the customers.
 - A few i.MX7D device additions, watchdog, cortex-a7 coresight
   components, RTC, power key, power off.
 - Some Vybrid updates: add device support for I2C, QSPI, eSDHC etc.,
   update ADC node, and define stdout-path property.
 - A few random updates for i.MX27 and i.MX53 devices.

* tag 'imx-dt-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits)
  ARM: dts: imx6ul: add snvs power key support
  ARM: dts: imx6ul: add RTC support
  ARM: dts: imx6ul: enable GPC as extended interrupt controller
  ARM: dts: imx6sx: correct property name for wakeup source
  ARM: dts: add property for maximum ADC clock frequencies
  ARM: dts: imx7d: enable snvs rtc, onoffkey and power off
  ARM: dts: imx6ul-14x14-evk: add fec1 and fec2 support
  ARM: dts: imx: add fec1 and fec2 nodes for SOC i.MX6UL
  ARM: dts: imx27: add support of internal rtc
  ARM: dts: vf-colibri: define stdout-path property
  ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR
  ARM: dts: ls1021a: Add the eTSEC controller nodes
  ARM: dts: imx6ul: add qspi support
  ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h
  ARM: dts: imx6ul: add usb host and function support
  ARM: dts: vfxxx: Add io-channel-cells property for ADC node
  ARM: dts: ls1021a: Add dts nodes for audio on LS1021A
  ARM: imx6qdl-sabreauto.dtsi: enable USB support
  ARM: dts: imx: update snvs to use syscon access register
  ARM: dts: imx: add imx6ul and imx6ul evk board support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

If the gpio DT node has the gpio-ranges property, the range will be
added by the gpio core and doesn't need to be added by the pinctrl
driver.

By having the gpio-ranges property, we have an explicit dependency from
the gpio node to the pinctrl node and we can stop using the deprecated
pinctrl_add_gpio_range() function.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Merge tag 'rpi-dt-for-armsoc-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi into next/dt

 - New Firmware node and accompanying binding document

* tag 'rpi-dt-for-armsoc-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi:
  dt/bindings: Add binding for the Raspberry Pi firmware driver
  ARM: bcm2835: Add the firmware driver information to the RPi DT
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_dts_for_v4.3_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS updates for v4.3, take 2
- Add DTS property "altr,modrst-offset" for reset driver to
  use
- Add updated reset defines for the reset driver
- Add reset property for EMACs on Arria10

* tag 'socfpga_dts_for_v4.3_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga: dts: Add resets for EMACs on Arria10
  ARM: socfpga: dts: add "altr,modrst-offset" property
  dt-bindings: Add reset manager offsets for Arria10
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.3-rockchip32-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Some more devicetree changes, including usbphy support for the
Cortex-A9 SoCs and actually enabling usb on the rk3066-marsboard,
Two more veyron-devices - namely Speedy and Minnie and a fix for
the tsadc.
One slightly more interesting fix is the blocking of the last
16MB of memory on 4GB rk3288 devices. The rk3288 cannot use this
area for dma operations, so things like the mmc or usb controllers
regularly fail when trying to read data. This solution mimicks the
solution from the ChromeOS kernel, who also do not seem to have
found a better solution yet. Here it only moves to the devicetree.
As this issue is also present on the arm64 rk3368, any future
better solution to this problem would need to describe this in
the devicetree as well and could then remove this block.

* tag 'v4.3-rockchip32-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add veyron-minnie board
  ARM: dts: rockchip: reserve unusable memory region on rk3288
  ARM: dts: rockchip: enable usb controller on marsboard
  ARM: dts: rockchip: add usb phys to Cortex-A9 socs
  ARM: dts: rockchip: set correct dwc2 params for cortex-a9 socs
  ARM: dts: rockchip: Add veyron-speedy board
  ARM: dts: rockchip: Use correct dts properties for tsadc node on veyron
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt changes for v4.3 (part #3)

- device tree part of the Dove PMU series
- converting a new orion5x based platform to dt: Linkstation Mini

* tag 'mvebu-dt-4.3-3' of git://git.infradead.org/linux-mvebu:
  ARM: dts: Convert Linkstation Mini to Device Tree
  ARM: dt: dove: add GPU power domain description
  ARM: dt: dove: add video decoder power domain description
  ARM: dt: dove: wire up RTC interrupt
  ARM: dt: Add PMU node, making PMU child devices childs of this node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

Second batch of DT changes for 4.3:
- Add the slow clock to the nodes that will use it
- Add hlcd to the at91sam9x5 and at91sam9n12
- Add touchscreen and touch button support to the at91sam9x5ek

* tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (22 commits)
  ARM: at91/dt: sama5d2: use slow clock where necessary
  ARM: at91/dt: at91sam9x5dm: add QT1070 touch button controller
  ARM: at91/dt: at91sam9x5dm: add support for the touschscreen
  ARM: at91/dt: add drm support for at91sam9n12ek
  ARM: at91/dt: enable lcd support for at91sam9x5 SoCs
  ARM: at91/dt: add at91sam9x5-ek Display Module dtsi
  ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis
  ARM: at91/dt: define hlcdc node in at91sam9x5_lcd.dtsi
  ARM: at91/dt: sama5d4: use slow clock where necessary
  ARM: at91/dt: sama5d3: use slow clock where necessary
  ARM: at91/dt: at91sam9x5: use slow clock where necessary
  ARM: at91/dt: at91sam9rl: use slow clock where necessary
  ARM: at91/dt: at91sam9n12: use slow clock where necessary
  ARM: at91/dt: at91sam9g45: use slow clock where necessary
  ARM: at91/dt: at91sam9263: use slow clock where necessary
  ARM: at91/dt: at91sam9261: use slow clock where necessary
  ARM: at91/dt: at91sam9260: use slow clock where necessary
  ARM: at91/dt: at91rm9200: use slow clock where necessary
  Documentation: dt: rtc: at91rm9200: add clocks property
  Documentation: watchdog: at91sam9_wdt: add clocks property
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

AM437x devices sport SCU, TWD and Global timers,
let's add them to DTS so they have a chance to
probe and be used by Linux.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

am4372-rtc string was already part of dts, introduced to identify
the rtc specific to am4372 family of SoCs. It was removed in one of the
previous patches. Adding back the same with appropriate documentation.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.  Notable
exceptions are the "display" and "sound" nodes, which represent multiple
SoC devices, each having their own MSTP clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.  Notable
exceptions are the "display" and "sound" nodes, which represent multiple
SoC devices, each having their own MSTP clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.  A notable
exception is the "sound" node, which represents multiple SoC devices,
each having their own MSTP clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add Clock Domain support to the RZ Clock Pulse Generator (CPG) driver
using the generic PM Domain.  This allows to power-manage the module
clocks of SoC devices that are part of the CPG/MSTP Clock Domain using
Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>