In preparation for the addition of stmmac selftests we implement the MAC
loopback callback in dwmac4/5 cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for the addition of stmmac selftests we implement the MAC
loopback callback in dwmac1000 core.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for the addition of stmmac selftests we implement the MAC
loopback callback in dwmac100 core.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for the addition of selftests support for stmmac we add a
new callback to HWIF that can be used to set the controller in loopback
mode.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
net: phy: add interface mode PHY_INTERFACE_MODE_USXGMII

Add support for interface mode USXGMII.

On Freescale boards LS1043A and LS1046A a warning may pop up now
because mode xgmii should be changed to usxgmii (as the used
Aquantia PHY doesn't support XGMII).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

So far we didn't support mode USXGMII, and in order to not break few
boards mode XGMII was accepted for the AQR107 family even though it
doesn't support XGMII. Add USXGMII support to the Aquantia PHY driver
and warn if XGMII mode is set.

v2:
- add warning if XGMII mode is set
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new interface mode USXGMII to binding documentation.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for interface mode PHY_INTERFACE_MODE_USXGMII.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SO_TXTIME API enables packet tranmission with delayed delivery.
This is currently supported by the ETF and FQ packet schedulers.

Evaluate the interface with both schedulers. Install the scheduler
and send a variety of packets streams: without delay, with one
delayed packet, with multiple ordered delays and with reordering.
Verify that packets are released by the scheduler in expected order.

The ETF qdisc requires a timestamp in the future on every packet. It
needs a delay on the qdisc else the packet is dropped on dequeue for
having a delivery time in the past. The test value is experimentally
derived. ETF requires clock_id CLOCK_TAI. It checks this base and
drops for non-conformance.

The FQ qdisc expects clock_id CLOCK_MONOTONIC, the base used by TCP
as of commit fb420d5d ("tcp/fq: move back to CLOCK_MONOTONIC").
Within a flow there is an expecation of ordered delivery, as shown by
delivery times of test 4. The FQ qdisc does not require all packets to
have timestamps and does not drop for non-conformance.

The large (msec) delays are chosen to avoid flakiness.

	Output:

	SO_TXTIME ipv6 clock monotonic
	payload:a delay:28 expected:0 (us)

	SO_TXTIME ipv4 clock monotonic
	payload:a delay:38 expected:0 (us)

	SO_TXTIME ipv6 clock monotonic
	payload:a delay:40 expected:0 (us)

	SO_TXTIME ipv4 clock monotonic
	payload:a delay:33 expected:0 (us)

	SO_TXTIME ipv6 clock monotonic
	payload:a delay:10120 expected:10000 (us)

	SO_TXTIME ipv4 clock monotonic
	payload:a delay:10102 expected:10000 (us)

	[.. etc ..]

	OK. All tests passed

Changes v1->v2: update commit message output
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
ipv6: Move exceptions to fib6_nh and make it optional in a fib6_info

Patches 1 and 4 move pcpu and exception caches from fib6_info to fib6_nh.
With respect to the current FIB entries this is only a movement from one
struct to another contained within the first.

Patch 2 refactors the core logic of fib6_drop_pcpu_from into a helper
that is invoked per fib6_nh.

Patch 3 refactors exception handling in a similar way - creating a bunch
of helpers that can be invoked per fib6_nh with the goal of making patch
4 easier to review as well as creating the code needed for nexthop
objects.

Patch 5 makes a fib6_nh at the end of a fib6_info an array similar to
IPv4 and its fib_info. For the current fib entry model, all fib6_info
will have a fib6_nh allocated for it.

Patch 6 refactors ip6_route_del moving the code for deleting an
exception entry into a new function.

Patch 7 adds tests for redirect route exceptions. The new test was
written against 5.1 (before any of the nexthop refactoring). It and the
pmtu.sh selftest exercise the exception code paths - from creating
exceptions to cleaning them up on device delete. All tests pass without
any rcu locking or memleak warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add test for ICMP redirects and exception processing. Test is setup
for later addition of tests using nexthop objects for routing.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the removal of cached routes to a helper, ip6_del_cached_rt, that
can be invoked per nexthop. Rename the existig ip6_del_cached_rt to
__ip6_del_cached_rt since it is called by ip6_del_cached_rt.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move fib6_nh to the end of fib6_info and make it an array of
size 0. Pass a flag to fib6_info_alloc indicating if the
allocation needs to add space for a fib6_nh.

The current code path always has a fib6_nh allocated with a
fib6_info; with nexthop objects they will be separate.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the pcpu routes exceptions are really per nexthop, so move
rt6i_exception_bucket from fib6_info to fib6_nh.

To avoid additional increases to the size of fib6_nh for a 1-bit flag,
use the lowest bit in the allocated memory pointer for the flushed flag.
Add helpers for retrieving the bucket pointer to mask off the flag.

The cleanup of the exception bucket is moved to fib6_nh_release.

fib6_nh_flush_exceptions can now be called from 2 contexts:
1. deleting a fib entry
2. deleting a fib6_nh

For 1., fib6_nh_flush_exceptions is called for a specific fib6_info that
is getting deleted. All exceptions in the cache using the entry are
deleted. For 2, the fib6_nh itself is getting destroyed so
fib6_nh_flush_exceptions is called for a NULL fib6_info which means
flush all entries.

The pmtu.sh selftest exercises the affected code paths - from creating
exceptions to cleaning them up on device delete. All tests pass without
any rcu locking or memleak warnings.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before moving exception bucket from fib6_info to fib6_nh, refactor
rt6_flush_exceptions, rt6_remove_exception_rt, rt6_mtu_change_route,
and rt6_update_exception_stamp_rt. In all 3 cases, move the primary
logic into a new helper that starts with fib6_nh_. The latter 3
functions still take a fib6_info; this will be changed to fib6_nh
in the next patch.

In the case of rt6_mtu_change_route, move the fib6_metric_locked
out as a standalone check - no need to call the new function if
the fib entry has the mtu locked. Also, add fib6_info to
rt6_mtu_change_arg as a way of passing the fib entry to the new
helper.

No functional change intended. The goal here is to make the next
patch easier to review by moving existing lookup logic for each to
new helpers.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the existing pcpu walk in fib6_drop_pcpu_from to a new
helper, __fib6_drop_pcpu_from, that can be invoked per fib6_nh with a
reference to the from entries that need to be evicted. If the passed
in 'from' is non-NULL then only entries associated with that fib6_info
are removed (e.g., case where fib entry is deleted); if the 'from' is
NULL are entries are flushed (e.g., fib6_nh is deleted).

For fib6_info entries with builtin fib6_nh (ie., current code) there
is no change in behavior.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rt6_info are specific instances of a fib entry and are tied to a
device and gateway - ie., a nexthop. Before nexthop objects, IPv6 fib
entries have separate fib6_info for each nexthop in a multipath route,
so the location of the pcpu cache in the fib6_info struct worked.
However, with nexthop objects a fib6_info can point to a set of nexthops
(yet another alignment of ipv6 with ipv4). Accordingly, the pcpu
cache needs to be moved to the fib6_nh struct so the cached entries
are local to the nexthop specification used to create the rt6_info.

Initialization and free of the pcpu entries moved to fib6_nh_init and
fib6_nh_release.

Change in location only, from fib6_info down to fib6_nh; no other
functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Y.b. Lu says:

====================
ENETC: support hardware timestamping

This patch-set is to support hardware timestamping for ENETC
and also to add ENETC 1588 timer device tree node for ls1028a.

Because the ENETC RX BD ring dynamic allocation has not been
supported and it is too expensive to use extended RX BDs
if timestamping is not used, a Kconfig option is used to
enable extended RX BDs in order to support hardware
timestamping. This option will be removed once RX BD
ring dynamic allocation is implemented.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ENETC 1588 timer node which is ENETC PF 4 (Physiscal Function 4).
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new compatible for ENETC PTP.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add get_ts_info interface for ethtool
to support getting timestamping capability.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add hardware timestamping support
for ENETC. On Rx, timestamping is enabled for all
frames. On Tx, we only instruct the hardware to
timestamp the frames marked accordingly by the stack.

Because the RX BD ring dynamic allocation has not been
supported and it is too expensive to use extended RX BDs
if timestamping is not used, a Kconfig option is used to
enable extended RX BDs in order to support hardware
timestamping. This option will be removed once RX BD
ring dynamic allocation is implemented.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 1b3fa5cf ("net: ll_temac: Cleanup multicast filter on change")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-05-23

This series contains updates to ice driver only.

Anirudh cleans up white space issues and other code formatting issues in the
driver.  Also implemented LLDP persistence across reboots and start/stop of the
LLDP agent.  Updated print statements for driver capabilities to include
if it is a device or function capability.

Bruce cleaned up variable declarations by removing unneeded assignment.

Dave fixes a potential hang due to a couple of flows that recursively
acquire the RTNL lock which results in a deadlock.

Tony updates the driver to advertise what link modes we are capable of
when the user does not request a specific link mode.

Usha fixes up the LLDP MIB change event handling by cleaning up
workarounds and print the DCB configuration changes detected.

Brett fixes the driver to handle failures in the VF reset path, which
was failing to free resources upon an error.

Richard fixed the reported of stats via ethtool to align with our other
Intel drivers.

Jesse optimizes the transmit buffer and ring structures to have more
efficient ordering to get hot cache lines to have packed data.  Also
optimized the VF structure to use less memory, since it is used hundreds
of times throughout the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent versions of sparse warn about casting pointers to/from restricted
endian types in the Linux driver.  Silence those with the compiler
attribute __force macro from the Linux kernel to force casts to/from
restricted endian types.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently the driver is calling ice_napi_del() and then
unregister_netdev(). The call to unregister_netdev() will result in a
call to ice_stop() and then ice_vsi_close(). This is where we call
napi_disable() for all the MSI-X vectors. This flow is reversed so make
the changes to ensure napi_disable() happens prior to napi_del().

Before calling napi_del() and free_netdev() make sure
unregister_netdev() was called. This is done by making sure the
__ICE_DOWN bit is set in the vsi->state for the interested VSI.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The ice_vf struct can be used hundreds of times in our
driver so it pays to use less memory per struct.

ice_vf prior to this commit:
  /* size: 112, cachelines: 2, members: 25 */
  /* sum members: 101, holes: 4, sum holes: 8 */
  /* bit holes: 2, sum bit holes: 11 bits */
  /* padding: 3 */
  /* last cacheline: 48 bytes */

ice_vf after this commit:
  /* size: 104, cachelines: 2, members: 25 */
  /* sum members: 100, holes: 3, sum holes: 4 */
  /* bit holes: 1, sum bit holes: 3 bits */
  /* last cacheline: 40 bytes */
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We can use bit fields to store boolean values and when the
bit fields are next to each other, the compiler will combine them
(as long as the size holds enough).
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Use more efficient structure ordering by using the pahole tool
and a lot of code inspection to get hot cache lines to have
packed data (no holes if possible) and adjacent warm data.

ice_ring prior to this change:
  /* size: 192, cachelines: 3, members: 23 */
  /* sum members: 158, holes: 4, sum holes: 12 */
  /* padding: 22 */

ice_ring after this change:
  /* size: 192, cachelines: 3, members: 25 */
  /* sum members: 162, holes: 1, sum holes: 1 */
  /* padding: 29 */

ice_tx_buf prior to this change:
  /* size: 48, cachelines: 1, members: 7 */
  /* sum members: 38, holes: 2, sum holes: 6 */
  /* padding: 4 */
  /* last cacheline: 48 bytes */

ice_tx_buf after this change:
  /* size: 40, cachelines: 1, members: 7 */
  /* sum members: 38, holes: 1, sum holes: 2 */
  /* last cacheline: 40 bytes */
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fixes ethtool -S reported stats in ice driver to match
format and nomenclature of the ixgbe driver.
Signed-off-by: Richard Rodriguez <richard.rodriguez@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently if ice_reset_all_vfs() fails in ice_alloc_vfs() we fail to
free some resources, reset variables, and return an error value.
Fix this by adding another unroll case to free the pf->vf array, set
the pf->num_alloc_vfs to 0, and return an error code.

Without this, if ice_reset_all_vfs() fails in ice_alloc_vfs() we will
not be able to do SRIOV without hard rebooting the system because
rmmod'ing the driver does not work.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes the LLDP MIB change event handling code by removing
the workarounds in the current code. Added ice_dcb_need_recfg() to
print the DCB configuration changes detected via MIB change event.
Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

User requested link modes affect what is returned as an advertised
link mode.  If no modes have been requested, we are not advertising
any link modes.  Advertise what we are capable of supporting if no
link modes have been requested.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When disabling and enabling VSIs, there are a couple of flows
that recursively acquire the RTNL lock which causes a deadlock.
Fix that.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice_parse_caps is used to parse both device and function capabilities.
Currently, capabilities are printed with a cryptic "HW caps" prefix,
which makes it difficult to distinguish whether the capabilities being
printed are device or function capabilities.

This patch makes a change to add a "func cap" prefix when printing
function capabilities, and a "dev cap" prefix when printing device
capabilities.

This patch also changes some of the capability print strings for
consistency.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix checkpatch warning "WARNING:BRACES: braces {} are not necessary
for single statement blocks"
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Commit 3463688e6ced ("ice: Add more validation in ice_vc_cfg_irq_map_msg")
added an assignment of vsi making the assignment during declaration
unnecessary.

Also, cleanup the declaration and assignment of irqmap_info to not use two
lines in the variable declaration section.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Implement LLDP persistence across reboots, start and stop of LLDP agent.
Add additional parameter to ice_aq_start_lldp and ice_aq_stop_lldp.

Also change the ethtool private flag from "disable-fw-lldp" to
"enable-fw-lldp". This change will flip the boolean logic of the
functionality of the flag (on = enable, off = disable). The change
in name and functionality is to differentiate between the
pre-persistence and post-persistence states.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix double spacing in ice_napi_disable_all
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Create if_rmnet.h and move the rmnet MAP packet structs to this
common include file. To account for portablity, add little and
big endian bitfield definitions similar to the ip & tcp headers.

The definitions in the headers can now be re-used by the
upcoming ipa driver series as well as qmi_wwan.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>