- 22 Feb, 2013 40 commits
-
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by:
-
Jingoo Han authored
'before_power' was used to check the previous status when resume() is called. However, FB_BLANK_POWERDOWN was used in suspend() all the time, so there is no need to check the previous status. Also, redundant return variables are removed to reduce the code. Signed-off-by:
-
Jingoo Han authored
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by:
-
Jingoo Han authored
Remove unnecessary NULL deference check, because it was already checked in ams369fg06_probe(). Also, unnecessary parentheses are removed in ams369fg06_power_is_on(). Signed-off-by:
-
Jingoo Han authored
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by:
-
Jingoo Han authored
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by:
-
Jingoo Han authored
'before_power' was used to check the previous status when resume() is called. However, FB_BLANK_POWERDOWN was used in suspend() all the time, so there is no need to check the previous status. Also, redundant return variables are removed to reduce the code. Signed-off-by:
-
Jingoo Han authored
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by:
-
Jingoo Han authored
Remove unnecessary NULL deference check, because it was already checked in s6e63m0_probe(). Also, POWER_IS_ON is replaced with s6e63m0_power_is_on(). Signed-off-by:
-
Jingoo Han authored
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by:
-
Jingoo Han authored
Lowercase names of structs should be used, because they are not preprocessor macros. Signed-off-by:
-
Jingoo Han authored
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by:
-
Jingoo Han authored
Redundant return variables are removed to reduce the code. Signed-off-by:
-
Jingoo Han authored
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by:
-
Jingoo Han authored
Removee unnecessary NULL deference check, because it was already checked in ld9040_probe(). Also, power_is_on is replaced with ld9040_power_is_on(). Signed-off-by:
-
Jingoo Han authored
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by:
-
Jingoo Han authored
Add the lms501kf03 LCD panel driver. The lms501kf03 LCD panel (800 x 480) driver uses 3-wired SPI inteface. [akpm@linux-foundation.org: remove unused variable `before_power'] [akpm@linux-foundation.org: make lms501kf03_shutdown() static, per Fengguang] Signed-off-by:
Ilho Lee <Ilho215.lee@samsung.com> Signed-off-by:
-
Cody P Schafer authored
Add gfp.h, mmzone.h, memory_hotplug.h & vmalloc.h to the "MEMORY MANAGMENT" section so scripts/get_maintainer.pl can do a better job of making recommendations. Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by:
-
Geert Uytterhoeven authored
For removed files, get_maintainer.pl doesn't find any maintainers (besides the default linux-kernel@vger.kernel.org), as it only looks at the "+++" lines, which are "/dev/null" for removals. Fix this by extending the parsing to the "---" lines. E.g. for the two line test patch below the real score maintainers will now be found: --- a/arch/score/include/asm/dma-mapping.h +++ /dev/null Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Mikhail Gruzdev authored
Standardize pr_devel logging macros family by adding pr_devel_once and pr_devel_ratelimited. Signed-off-by:
Mikhail Gruzdev <michail.gruzdev@gmail.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Stepan Moskovchenko authored
Add the %pa format specifier for printing a phys_addr_t type and its derivative types (such as resource_size_t), since the physical address size on some platforms can vary based on build options, regardless of the native integer type. Signed-off-by:
Stepan Moskovchenko <stepanm@codeaurora.org> Cc: Rob Landley <rob@landley.net> Cc: George Spelvin <linux@horizon.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Andrew Morton authored
Remove a tabstop from the switch statement, in the usual fashion. A few instances of weirdwrapping were removed as a result. Cc: Chen Gang <gang.chen@asianux.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Chen Gang authored
arg2 will never < 0, for its type is 'unsigned long' Also, use the provided macros. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Reported-by:
Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
-
Christian Kujau authored
After I came across a help text for SUNGEM mentioning a broken sun.com URL, I felt like fixing those up, as they are now pointing to oracle.com URLs. Signed-off-by:
Christian Kujau <lists@nerdbynature.de> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kyle McMartin authored
CONFIG_EXPERT doesn't really make sense, and hides it unintentionally. Remove superfluous "default n" pointed out by Ingo as well. Signed-off-by:
Kyle McMartin <kyle@redhat.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
